Calculate Torque, Thrust, and Power
Inches/Metric:
In Inches
In Metric
Work Piece Material:
1.1 Low Carbon Steel; Long Chip (60,000 PSI / 125 HBN)
1.2 Low Carbon Steel; Short Chip (60,000 PSI / 125 HBN)
2.1 Unalloyed Carbon Steel; Long Chip (95,000 PSI / 190 HBN)
2.2 Unalloyed Carbon Steel; Short Chip (95,000 PSI / 190 HBN)
3 Unalloyed Carbon Steel (125,000 PSI / 250 HBN)
4 Unalloyed Carbon Steel (140,000 PSI / 270 HBN)
5 Unalloyed Carbon Steel (150,000 PSI / 300 HBN)
6 Low Alloyed Steel (88,000 PSI / 180 HBN)
7 Low Alloyed Steel (135,000 PSI / 275 HBN)
8 Low Alloyed Steel (150,000 PSI / 300 HBN)
9 Low Alloyed Steel (175,000 PSI / 350 HBN)
10 High Alloyed Steel (100,000 PSI / 200 HBN)
14.2 Stainless Steel; Aust./Fer (130,000 PSI / 260 HBN)
15 Gray Cast Iron (180HBN)
16 Gray Cast Iron (260HBN)
18 Ductile(Nodular) Cast Iron (250HBN)
22 Aerospace Aluminum; Heat Treated (100HBN)
23 Automotive Aluminum; Si < 12%(75HBN)
25 Automotive Aluminum; Si > 12% (130HBN)
32 High Temperature Alloys; Fe Based (230HBN)
33 High Temperature Alloys; Ni Or Co Based (250HBN)
34 High Temperature Alloys; Ni Or Co Based (350HBN)
37 Titanium (60,000 PSI)
41 Unalloyed Carbon Steel (140,000 PSI / 270 HBN)
Dm Drill diameter:inch
mm
Vc Cutting speed:sfm
m/min
ap Depth of hole:in.
mm
fn Feed:in/rev
mm/rev
Select Drilling Option:
Drill Fix
HTS & HTS-C
SE-Drill & KSEM
n Spindle speed:rpm
1 / min
Qz Metal removal rate:lnch3 /min
cm3 /min
V f Inches per minute: V f Millimeters per minute:
ipm
mm/min
T c Time in cut:0
min
sec.
ATG - 1 172.20.22.29