Download Catalog
Boost productivity with Kennametal KenTip, KSEM, and KSEM Plus modular drills with diameter ranges from .314" to 2.756" (8,0-70,0mm) and up to 10xD available as standard.
Product Videos
KenTIP Modular Drills »
- KenTIP drills offer performance usually achieved with solid carbide drills.
- Use for applications from .314" to 1.023" (8,00 - 25,99mm) up to 8xD.
- Wide range of grades and geometries available for drilling steel, stainless steel, cast iron, and ductile iron applications.
- Easy insert changes with unique locking method that requires no screws or clamps.
- Inserts are disposable - no reconditioning costs or waiting for waiting for reconditioned drills. Same performance insert to insert.
KSEM Modular Drills »
- Available in extended diameters and lengths beyond KenTIP sizes.
- Use KSEM drills for applications from .4921" to 1.575" (12,50 - 40,00mm) up to 10xD.
- Achieve high metal removal rates from extremely stable and robust pocket seat for modular drilling.
- Available in a wide range of grades and geometries for drilling steel, stainless steel, cast iron, and ductile iron applications.
- Easy insert changes with a simple wrench for insert removal.
- All geometries except HPL(M) can be reconditioned by Kennametal for added savings.
KSEM PLUS »
- Simple, yet highly effective, combination of benefits of KSEM modular drill (high feeds and length-to-diameter ratios) with indexable drill (high speeds, low operating costs). Result: significant productivity and capacity improvements!
- Use for applications from 1.260." - 2.756" (32-70mm) on steel, stainless steel, cast iron, and ductile iron.
- Two effective cutting edges mean higher metal removal rates than indexable drills, and up to 100% increased productivity.
- Replaceable heads with new FDS-interface coupling mean fast insert changes, one tool for different insert heads, and only the drill heads can be changed, rather than the entire tool body.
2x2 DRILLS »
- Patented HP point - up to 50% shorter cycle times and 4x longer tool life.
- Four margins for better guiding and hole accuracy.
- MT-CVD coating lasts longer than standard PVD coatings for reduced cost per hole.
- No reconditioning needed.
ProductsCategoryPage
Feature
HOW TO BUY
Contact Kennametal US Representative 800.446.7738
