Screw-On • S-Style Clamping • For Positive Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (11)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(11)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(11)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(11)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(11)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(11)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(11)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(11)
- M Stainless Steel (11)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(11)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(11)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(11)
- K Cast Iron (11)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(11)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(11)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(11)
- N Non-Ferrous Materials (11)
- N1Wrought Aluminum (11)
- N3High-Silicon Aluminum Alloys Si >12.2%(10)
- N7MMC's (10)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(11)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (11)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (11)
- N6Carbon, Graphite Composites, CFRP (11)
- S High-Temp Alloys (11)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(11)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(11)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(11)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(11)
- H Hardened Materials (11)
- H1Hardened Materials 44-48 HRC(11)
- H4Hardened Materials >60 HRC(11)
- H3Hardened Materials 56-60 HRC(11)
- H2Hardened Materials 48-55 HRC(11)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (8)
- 95.0 (3)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (10)
- 1.0 (10)
- 2.0 (11)
- 4.0 (10)
to
Over All Length [L]
Over All Length [L]
- 0.7874 in(2)
- 0.79 in(2)
- 0.984 in(1)
- 0.9843 in(2)
- 1.625 in(4)
to
Over All Length [L]
Over All Length [L]
- 20.0 mm(2)
- 20.066 mm(1)
- 20.07 mm(1)
- 25.0 mm(3)
- 41.275 mm(4)
to
Corner Radius
Corner Radius
- 0.0 in(9)
- 0.001 in(9)
- 0.002 in(9)
- 0.003 in(7)
- 0.004 in(11)
- 0.008 in(11)
- 0.016 in(11)
- 0.031 in(11)
- 0.047 in(11)
- 0.063 in(2)
to
Corner Radius
Corner Radius
- 0.0 mm(9)
- 0.025 mm(9)
- 0.05 mm(9)
- 0.075 mm(7)
- 0.1 mm(11)
- 0.2 mm(11)
- 0.4 mm(11)
- 0.8 mm(11)
- 1.2 mm(11)
- 1.6 mm(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (11)
- KB1345 (11)
- KB1610 (3)
- KB1630 (4)
- KB5610 (9)
- KB5630 (9)
- KBH10 (9)
- KBH20 (11)
- KC5010 (11)
- KC5025 (11)
- KC5410 (11)
- KC730 (11)
- KC850 (11)
- KCK05 (10)
- KCK05B (7)
- KCK15 (10)
- KCK15B (10)
- KCK20 (11)
- KCK20B (10)
- KCM15 (8)
- KCM15B (10)
- KCM25 (11)
- KCM25B (11)
- KCM25S (9)
- KCM35 (10)
- KCM35B (2)
- KCP05 (9)
- KCP05B (2)
- KCP10 (11)
- KCP10B (11)
- KCP20S (9)
- KCP25 (11)
- KCP25B (11)
- KCP25C (11)
- KCP30 (10)
- KCP30B (1)
- KCS10 (11)
- KCS10B (11)
- KCS25S (9)
- KCU10 (11)
- KCU10B (11)
- KCU25 (11)
- KCU25B (11)
- KD1400 (10)
- KD1405 (1)
- KD1425 (10)
- KN10S (9)
- KT315 (11)
- KT325 (9)
- KTP10 (10)
- KTP25S (9)
- SP4019 (7)
Hand Of Tool
Hand Of Tool
- L (3)
- R (8)
Wiper Insert
Wiper Insert
- N (11)
- Y (11)
F Dimension
F Dimension
- 16.256 mm(1)
- 16.26 mm(1)
- 17.0 mm(2)
- 21.875 mm(1)
- 22.0 mm(2)
- 27.0 mm(2)
- 35.0 mm(2)
to
F Dimension
F Dimension
- 0.64 in(2)
- 0.6693 in(2)
- 0.8612 in(1)
- 0.866 in(1)
- 0.8661 in(1)
- 1.063 in(2)
- 1.378 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 30.48 mm(2)
- 32.0 mm(2)
- 40.0 mm(3)
- 50.0 mm(2)
- 63.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2 in(2)
- 1.2598 in(2)
- 1.5748 in(2)
- 1.575 in(1)
- 1.9685 in(2)
- 2.4803 in(2)
to
Cutting Direction
Cutting Direction
- B (3)
- E (8)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (10)
- NEUTRAL (ZERO) (1)
Maximum Bore Depth
Maximum Bore Depth
- 3.9372 in(2)
- 4.0 in(2)
- 5.0392 in(2)
- 5.04 in(1)
- 6.2992 in(2)
- 7.874 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(2)
- 101.6 mm(2)
- 128.0 mm(3)
- 160.0 mm(2)
- 200.0 mm(2)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (3)
- D-DIAMOND/RHOMBIC 55 (8)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (11)
- B L (11)
- D P (10)
- H T (11)
- H W (11)
Back-End
Back-End Diameter
Back-End Diameter
- 25.0 mm(2)
- 25.4 mm(2)
- 32.0 mm(3)
- 40.0 mm(2)
- 50.0 mm(2)
to
No filters matching ""
