Bolt-On Heads Through Coolant
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (135)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(135)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(135)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(135)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(135)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(135)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(135)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(135)
- M Stainless Steel (138)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(138)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(138)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(138)
- K Cast Iron (131)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(131)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(131)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(131)
- N Non-Ferrous Materials (123)
- N1Wrought Aluminum (123)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(123)
- N3High-Silicon Aluminum Alloys Si >12.2%(60)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (123)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (123)
- N6Carbon, Graphite Composites, CFRP (123)
- N7MMC's (76)
- S High-Temp Alloys (138)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(138)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(138)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(138)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(138)
- H Hardened Materials (121)
- H1Hardened Materials 44-48 HRC(121)
- H2Hardened Materials 48-55 HRC(121)
- H3Hardened Materials 56-60 HRC(86)
- H4Hardened Materials >60 HRC(76)
Applications
Applications
Back Boring (34)
Face Grooving (8)
ID Facing (20)
ID Grooving (45)
ID Thread Turning (11)
TRN Boring (45)
Type of Thread
Type of Thread
- 55 (6)
- 60 (16)
- ACME (17)
- API (13)
- API BUTTRESS (2)
- API RD (12)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (9)
- NPT (12)
- NPTF (4)
- RD DIN 405 (6)
- STUB ACME (14)
- TR DIN 103 (6)
- UN (14)
- UNJ (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (130)
- Lightly Interrupted Cut (130)
- Smooth Cut (130)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 62.5 (2)
- 90.0 (76)
- 93.0 (34)
- 95.0 (32)
to
Connection Style
Connection Style
- Bolt-On Head (126)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (4)
- 1.0 (100)
- 2.0 (73)
- 3.0 (27)
- 4.0 (54)
- 6.0 (14)
- 8.0 (20)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 17.138 mm(34)
- 17.638 mm(12)
- 18.638 mm(2)
- 22.638 mm(6)
- 24.638 mm(4)
- 25.238 mm(1)
- 25.638 mm(2)
- 26.638 mm(2)
- 31.638 mm(6)
- 32.238 mm(3)
- 32.638 mm(12)
- 34.238 mm(4)
- 34.638 mm(14)
- 35.238 mm(7)
- 35.638 mm(24)
- 37.138 mm(1)
- 38.638 mm(3)
- 39.638 mm(1)
- 42.638 mm(8)
to
Corner Radius
Corner Radius
- 0.0 mm(28)
- 0.025 mm(25)
- 0.05 mm(29)
- 0.075 mm(24)
- 0.1 mm(69)
- 0.125 mm(12)
- 0.15 mm(14)
- 0.175 mm(14)
- 0.2 mm(102)
- 0.225 mm(14)
- 0.25 mm(17)
- 0.275 mm(7)
- 0.3 mm(25)
- 0.325 mm(14)
- 0.35 mm(23)
- 0.4 mm(125)
- 0.425 mm(3)
- 0.45 mm(11)
- 0.475 mm(3)
- 0.5 mm(10)
- 0.525 mm(3)
- 0.575 mm(10)
- 0.6 mm(4)
- 0.625 mm(2)
- 0.65 mm(1)
- 0.7 mm(4)
- 0.775 mm(8)
- 0.8 mm(104)
- 0.9 mm(10)
- 0.925 mm(2)
- 0.95 mm(2)
- 1.0 mm(15)
- 1.05 mm(6)
- 1.2 mm(88)
- 1.5 mm(16)
- 1.55 mm(8)
- 1.575 mm(16)
- 1.6 mm(64)
- 1.65 mm(8)
- 1.975 mm(8)
- 2.0 mm(18)
- 2.075 mm(10)
- 2.375 mm(16)
- 2.4 mm(20)
- 2.45 mm(10)
- 2.5 mm(7)
- 2.55 mm(6)
- 2.575 mm(6)
- 3.0 mm(4)
- 3.05 mm(4)
- 3.075 mm(4)
- 3.175 mm(8)
- 3.2 mm(2)
- 3.25 mm(4)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (12)
- K090 (2)
- K313 (120)
- K420 (10)
- K68 (63)
- KB1340 (16)
- KB1345 (38)
- KB1610 (38)
- KB1630 (44)
- KB5610 (34)
- KB5630 (38)
- KBH10 (60)
- KBH10B (60)
- KBH20 (69)
- KBH20B (62)
- KC5010 (101)
- KC5020P (2)
- KC5025 (102)
- KC5410 (79)
- KC720 (10)
- KC730 (82)
- KC850 (86)
- KC9110 (1)
- KC9125 (2)
- KCK05 (76)
- KCK05B (38)
- KCK15 (76)
- KCK15B (76)
- KCK20 (90)
- KCK20B (122)
- KCM15 (76)
- KCM15B (78)
- KCM25 (82)
- KCM25B (82)
- KCM25S (16)
- KCM35 (74)
- KCM35B (72)
- KCP05 (62)
- KCP05B (52)
- KCP10 (86)
- KCP10B (128)
- KCP10C (12)
- KCP15 (4)
- KCP20S (16)
- KCP25 (78)
- KCP25B (126)
- KCP25C (128)
- KCP30 (82)
- KCP30B (38)
- KCP40 (42)
- KCP40B (52)
- KCPK05 (48)
- KCS10 (44)
- KCS10B (108)
- KCS25S (16)
- KCU10 (130)
- KCU10B (131)
- KCU20B (7)
- KCU25 (127)
- KCU25B (129)
- KD1400 (56)
- KD1405 (22)
- KD1425 (60)
- KN10S (18)
- KS15 (12)
- KT315 (81)
- KT325 (40)
- KTP10 (70)
- KTP25S (64)
- KY1540 (12)
- KY3500 (44)
- KY4300 (22)
- KY4400 (40)
- KYHK15B (46)
- KYK10 (24)
- KYK25 (22)
- KYS25 (12)
- KYS30 (14)
- SP4019 (24)
- X00580 (12)
- X00581 (12)
- X00582 (12)
- X00583 (12)
- X00584 (12)
- X00585 (12)
- X00586 (12)
- X00591 (12)
- X00592 (12)
- X00593 (12)
- X00594 (12)
- X00596 (12)
- X00597 (12)
- X00599 (12)
Hand Of Tool
Hand Of Tool
- L (64)
- R (74)
Wiper Insert
Wiper Insert
- N (138)
- Y (44)
F Dimension
F Dimension
- 17.0 mm(20)
- 18.278 mm(1)
- 20.3 mm(6)
- 22.0 mm(21)
- 23.0 mm(2)
- 23.278 mm(1)
- 23.8 mm(2)
- 26.8 mm(6)
- 27.0 mm(27)
- 27.8 mm(2)
- 28.278 mm(1)
- 28.677 mm(1)
- 30.8 mm(8)
- 32.8 mm(4)
- 35.0 mm(27)
- 35.8 mm(2)
- 36.278 mm(1)
- 36.677 mm(1)
- 36.98 mm(1)
- 37.8 mm(4)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 32.0 mm(19)
- 33.0 mm(8)
- 40.0 mm(26)
- 43.0 mm(6)
- 47.0 mm(4)
- 48.0 mm(2)
- 50.0 mm(29)
- 51.0 mm(4)
- 53.0 mm(4)
- 61.0 mm(2)
- 63.0 mm(34)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 26.0 mm(2)
- 30.0 mm(2)
- 32.0 mm(19)
- 33.0 mm(10)
- 40.0 mm(26)
- 41.0 mm(2)
- 43.0 mm(6)
- 47.0 mm(4)
- 48.0 mm(2)
- 50.0 mm(29)
- 51.0 mm(4)
- 53.0 mm(4)
- 61.0 mm(2)
- 63.0 mm(34)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 30.0 mm(2)
- 35.0 mm(2)
- 40.0 mm(2)
- 50.0 mm(2)
- 9999.0 mm(10)
to
Cutting Direction
Cutting Direction
- B (32)
- E (52)
- P (2)
- S (52)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (61)
- NEGATIVE-ZERO (32)
- NEUTRAL (ZERO) (13)
- POSITIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
- 17.138 mm(34)
- 42.638 mm(8)
- 100.0 mm(21)
- 128.0 mm(24)
- 160.0 mm(29)
- 200.0 mm(30)
to
Boring Bar Material
Boring Bar Material
- S (138)
Front-End
Clamp Style
Clamp Style
- D (28)
- N (11)
- P (26)
- S (39)
- Y (42)
Cutting Width
Cutting Width
- 1.0 mm(8)
- 1.19 mm(5)
- 1.194 mm(8)
- 1.2 mm(8)
- 1.5 mm(8)
- 1.57 mm(8)
- 1.575 mm(8)
- 1.75 mm(8)
- 1.829 mm(8)
- 1.981 mm(8)
- 2.0 mm(14)
- 2.12 mm(6)
- 2.125 mm(6)
- 2.2 mm(8)
- 2.235 mm(8)
- 2.236 mm(3)
- 2.25 mm(5)
- 2.387 mm(9)
- 2.388 mm(14)
- 2.39 mm(5)
- 2.464 mm(8)
- 2.5 mm(8)
- 2.51 mm(6)
- 2.511 mm(6)
- 2.667 mm(8)
- 2.75 mm(8)
- 2.794 mm(8)
- 2.997 mm(8)
- 3.0 mm(18)
- 3.099 mm(8)
- 3.125 mm(8)
- 3.17 mm(8)
- 3.175 mm(18)
- 3.177 mm(8)
- 3.18 mm(1)
- 3.2 mm(9)
- 3.25 mm(8)
- 3.251 mm(3)
- 3.3 mm(8)
- 3.301 mm(8)
- 3.302 mm(8)
- 3.32 mm(3)
- 3.5 mm(10)
- 3.607 mm(8)
- 3.96 mm(8)
- 3.962 mm(8)
- 3.974 mm(3)
- 3.988 mm(8)
- 4.0 mm(20)
- 4.094 mm(8)
- 4.125 mm(10)
- 4.242 mm(2)
- 4.25 mm(8)
- 4.5 mm(10)
- 4.521 mm(8)
- 4.699 mm(8)
- 4.75 mm(10)
- 4.76 mm(10)
- 4.762 mm(10)
- 4.763 mm(10)
- 4.775 mm(10)
- 4.78 mm(1)
- 4.785 mm(1)
- 4.788 mm(1)
- 4.8 mm(8)
- 4.801 mm(10)
- 4.873 mm(10)
- 4.877 mm(10)
- 4.878 mm(10)
- 4.88 mm(3)
- 4.95 mm(8)
- 4.953 mm(3)
- 4.978 mm(8)
- 5.0 mm(8)
- 5.004 mm(1)
- 5.125 mm(6)
- 5.41 mm(2)
- 5.5 mm(2)
- 6.0 mm(6)
- 6.125 mm(4)
- 6.346 mm(4)
- 6.35 mm(6)
- 6.36 mm(1)
- 6.477 mm(4)
- 6.478 mm(4)
- 6.502 mm(2)
- 7.0 mm(4)
- 7.125 mm(4)
- 7.317 mm(4)
- 9.754 mm(1)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (26)
- D-DIAMOND/RHOMBIC 55 (28)
- LT-TRIANGLE LAY DOWN THREAD 60 (7)
- PRISMATIC (42)
- T-TRIANGLE 60 (18)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (10)
- W-TRIGON 80 (4)
Insert Size
Insert Size
- 2 (8)
- 3 (14)
- 4 (10)
- 5 (6)
- 6 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 2.5 mm(2)
- 2.8 mm(2)
- 3.3 mm(2)
- 3.7 mm(2)
- 4.532 mm(4)
- 4.9 mm(2)
- 5.0 mm(1)
- 6.03 mm(4)
- 7.0 mm(10)
- 7.03 mm(2)
- 7.032 mm(6)
- 10.0 mm(12)
- 10.032 mm(12)
- 12.0 mm(16)
- 14.0 mm(4)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 26.0 mm(2)
- 30.0 mm(2)
- 33.0 mm(2)
- 41.0 mm(2)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 30.0 mm(2)
- 35.0 mm(2)
- 40.0 mm(2)
- 50.0 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (70)
- B L (103)
- C A (46)
- C N (44)
- D P (72)
- H T (81)
- H W (138)
Back-End
Connection Type
Connection Type
- BORING BAR HEAD (104)
- SERRATED FACE CONNECTION (22)
Back-End Diameter
Back-End Diameter
- 25.0 mm(31)
- 32.0 mm(38)
- 40.0 mm(41)
- 50.0 mm(36)
to
No filters matching ""
