KM™ Quick Change Tools
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (99)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(99)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(99)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(99)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(99)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(99)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(99)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(99)
- M Stainless Steel (99)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(99)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(99)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(99)
- K Cast Iron (99)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(99)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(99)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(99)
- N Non-Ferrous Materials (99)
- N1Wrought Aluminum (99)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(99)
- N3High-Silicon Aluminum Alloys Si >12.2%(41)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (99)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (99)
- N6Carbon, Graphite Composites, CFRP (99)
- N7MMC's (99)
- S High-Temp Alloys (99)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(99)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(99)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(99)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(99)
- H Hardened Materials (99)
- H1Hardened Materials 44-48 HRC(99)
- H2Hardened Materials 48-55 HRC(99)
- H3Hardened Materials 56-60 HRC(99)
- H4Hardened Materials >60 HRC(87)
Applications
Applications
Facing (32)
Multiple Direction Cutting (71)
Profiling (36)
TRN Boring (53)
Turning (53)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (99)
- Lightly Interrupted Cut (99)
- Smooth Cut (99)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (9)
- 75.0 (17)
- 90.0 (7)
- 93.0 (33)
- 95.0 (21)
- 107.5 (13)
to
Connection Style
Connection Style
- KM (46)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (41)
- 2.0 (62)
- 3.0 (17)
- 4.0 (82)
- 6.0 (17)
- 8.0 (41)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 45.0 mm(29)
- 50.0 mm(27)
- 55.0 mm(1)
- 60.0 mm(35)
- 70.0 mm(8)
to
Corner Radius
Corner Radius
- 0.1 mm(61)
- 0.2 mm(41)
- 0.35 mm(20)
- 0.4 mm(99)
- 0.6 mm(6)
- 0.8 mm(99)
- 1.2 mm(99)
- 1.6 mm(97)
- 2.375 mm(7)
- 2.4 mm(18)
- 3.175 mm(11)
- 3.2 mm(11)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (22)
- CW5025 (6)
- K060 (14)
- K090 (20)
- K313 (99)
- K68 (93)
- KB1340 (34)
- KB1345 (33)
- KB1610 (61)
- KB1630 (35)
- KB5610 (35)
- KB5630 (35)
- KBH10 (81)
- KBH10B (81)
- KBH20 (81)
- KBH20B (81)
- KC5010 (99)
- KC5025 (99)
- KC5410 (79)
- KC730 (79)
- KC850 (99)
- KCK05 (88)
- KCK05B (40)
- KCK15 (99)
- KCK15B (99)
- KCK20 (99)
- KCK20B (99)
- KCM15 (99)
- KCM15B (99)
- KCM25 (99)
- KCM25B (99)
- KCM35 (99)
- KCM35B (67)
- KCP05 (81)
- KCP05B (92)
- KCP10 (99)
- KCP10B (99)
- KCP25 (99)
- KCP25B (99)
- KCP25C (99)
- KCP30 (99)
- KCP30B (77)
- KCP40 (97)
- KCP40B (99)
- KCPK05 (88)
- KCS10 (14)
- KCS10B (88)
- KCU10 (99)
- KCU10B (99)
- KCU25 (99)
- KCU25B (99)
- KD1400 (35)
- KD1405 (35)
- KD1425 (41)
- KS15 (14)
- KT315 (81)
- KT325 (14)
- KTP10 (81)
- KTP25S (61)
- KY1540 (14)
- KY3500 (88)
- KY4300 (40)
- KY4400 (92)
- KYHK15B (99)
- KYK10 (53)
- KYK25 (66)
- KYS25 (34)
- KYS30 (59)
- PB100 (2)
- SP4019 (14)
- THM (13)
- THM-X (9)
- THMF-X (9)
- TN10P (20)
- TN10U (11)
- TN15M (13)
- TN15U (16)
- TN2000 (15)
- TN20K (20)
- TN20P (24)
- TN30M (13)
- TN30P (17)
- TN4000 (15)
- TN6010 (2)
- TTS (9)
- WBH10P (9)
- WBH10U (2)
- WBH20P (18)
- WBH30P (9)
- WBK40U (7)
- WBK45U (5)
- WDN00U (7)
- WDN25U (11)
- WK05CT (24)
- WK15CT (11)
- WK20CT (24)
- WM15CT (24)
- WM25CT (24)
- WM35CT (19)
- WP05CT (4)
- WP15CT (24)
- WP25CT (24)
- WP35CT (24)
- WS10PT (24)
- WS25PT (24)
- WU10HT (24)
- WU10PT (18)
- WU25PT (18)
- X00580 (14)
- X00581 (14)
- X00582 (14)
- X00583 (14)
- X00584 (14)
- X00585 (14)
- X00586 (14)
- X00591 (14)
- X00592 (14)
- X00593 (14)
- X00594 (14)
- X00596 (14)
- X00597 (14)
- X00599 (14)
Hand Of Tool
Hand Of Tool
- L (19)
- N (3)
- R (24)
Wiper Insert
Wiper Insert
- N (99)
- Y (51)
F Dimension
F Dimension
- 0.0 mm(3)
- 24.0 mm(4)
- 27.0 mm(12)
- 30.0 mm(4)
- 35.0 mm(7)
- 38.0 mm(3)
- 43.0 mm(10)
- 53.0 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 54.0 mm(8)
- 70.0 mm(7)
- 80.0 mm(7)
- 86.0 mm(26)
- 106.0 mm(5)
to
Cutting Direction
Cutting Direction
- B (3)
- S (43)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (38)
- NEGATIVE-ZERO (8)
Maximum Bore Depth
Maximum Bore Depth
- 45.0 mm(16)
- 50.0 mm(13)
- 55.0 mm(1)
- 60.0 mm(18)
- 70.0 mm(5)
to
Front-End
Clamp Style
Clamp Style
- D (98)
- M (2)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (21)
- D-DIAMOND/RHOMBIC 55 (40)
- S-SQUARE 90 (20)
- T-TRIANGLE 60 (11)
- V-DIAMOND/RHOMBIC 35 (2)
- W-TRIGON 80 (6)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (61)
- B L (81)
- C A (99)
- C N (88)
- D P (61)
- H T (81)
- H W (99)
Back-End
Connection Type
Connection Type
- TAPER SHANK (46)
System Size
System Size
- KM40TS (17)
- KM50TS (12)
- KM63TS (13)
- KM63UT (1)
- KM80TS (3)
Back-End Diameter
Back-End Diameter
- 40.0 mm(33)
- 50.0 mm(28)
- 63.0 mm(31)
- 80.0 mm(8)
to
No filters matching ""
