Willkommen
Bestätigen Sie bitte Ihre Präferenzen
Einstellungen aktualisieren

Produktvorschläge

Product Family suggestions

Kennametal steht Ihnen zur Diensten

Kundendienstv

Hier finden Sie die Kontaktdaten von unseren Kundendienstzentren rund um den Globus.

Schnellbestellung
Artikel erfolgreich zum Warenkorb hinzugefügt
Warenkorb anzeigen
Beginnen Sie das Jahr 2024 mit phänomenalen Einsparungen bei Bohrwerkzeugen. Jetzt bestellen.

KenTIP-Hartmetallschneidkörper

Filter auswählen
Filter
Filter
Filter anzeigen in
Metric
Inch
keyFilters
Werkstoff des Werkstücks
Werkstoff des Werkstücks
  • P Stahl (482)
    • P0
      Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS (482)
    • P1
      Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS (482)
    • P2
      Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (482)
    • P3
      Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (482)
    • P4
      Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (482)
    • P5
      Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS (482)
    • P6
      Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (482)
  • M Rostfreier Stahl (363)
    • M1
      Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS (363)
    • M2
      Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS (363)
    • M3
      Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (302)
  • K Gusseisen (610)
    • K1
      Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (610)
    • K2
      GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS (610)
    • K3
      Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS (610)
  • N Buntmetalle (16)
    • N1
      Geschmiedetes Aluminium (16)
    • N2
      Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 % (16)
    • N3
      Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2% (16)
    • N4
      Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (16)
  • S Hochwarmfeste Legierungen (191)
    • S1
      Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (175)
    • S2
      Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (175)
    • S3
      Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (175)
    • S4
      Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (191)
  • C Verbundwerkstoffe (CFRP) (21)
    • C1
      CFRP, CFRP / CFRP (5)
    • C2
      CFRP / Aluminium CFRP / Nichteisen (16)
    • C3
      CFRP / Titan CFRP / Hohe Temperatur (16)
    • C4
      CFRP/ rostfreier Stahl (16)
Erste Wahl auswählen
  • BR (3)
  • CN (90)
  • DE (150)
  • GB (69)
  • IN (16)
  • SG (37)
  • US (123)
Dreh-Durchmesser
Dreh-Durchmesser
  • 0.237 in (5)
  • 0.24 in (1)
  • 0.244 in (2)
  • 0.248 in (1)
  • 0.25 in (7)
  • 0.252 in (1)
  • 0.256 in (5)
  • 0.257 in (2)
  • 0.26 in (1)
  • 0.261 in (2)
  • 0.264 in (1)
  • 0.266 in (3)
  • 0.268 in (6)
  • 0.272 in (2)
  • 0.276 in (5)
  • 0.28 in (1)
  • 0.281 in (2)
  • 0.284 in (1)
  • 0.288 in (1)
  • 0.29 in (1)
  • 0.291 in (1)
  • 0.295 in (5)
  • 0.297 in (1)
  • 0.299 in (2)
  • 0.303 in (1)
  • 0.307 in (2)
  • 0.311 in (1)
  • 0.313 in (9)
  • 0.315 in (5)
  • 0.319 in (4)
  • 0.322 in (1)
  • 0.323 in (4)
  • 0.327 in (2)
  • 0.328 in (3)
  • 0.331 in (2)
  • 0.332 in (1)
  • 0.335 in (5)
  • 0.336 in (1)
  • 0.339 in (5)
  • 0.343 in (4)
  • 0.345 in (3)
  • 0.347 in (3)
  • 0.349 in (1)
  • 0.351 in (3)
  • 0.354 in (5)
  • 0.358 in (4)
  • 0.359 in (1)
  • 0.362 in (2)
  • 0.366 in (2)
  • 0.368 in (2)
  • 0.37 in (3)
  • 0.374 in (4)
  • 0.375 in (8)
  • 0.376 in (3)
  • 0.378 in (4)
  • 0.382 in (4)
  • 0.386 in (4)
  • 0.39 in (3)
  • 0.391 in (3)
  • 0.394 in (5)
  • 0.395 in (1)
  • 0.397 in (1)
  • 0.398 in (3)
  • 0.402 in (5)
  • 0.404 in (1)
  • 0.406 in (4)
  • 0.408 in (4)
  • 0.41 in (3)
  • 0.414 in (5)
  • 0.417 in (4)
  • 0.421 in (4)
  • 0.422 in (3)
  • 0.425 in (5)
  • 0.429 in (3)
  • 0.433 in (4)
  • 0.437 in (6)
  • 0.438 in (7)
  • 0.441 in (3)
  • 0.445 in (2)
  • 0.449 in (2)
  • 0.453 in (7)
  • 0.457 in (3)
  • 0.461 in (2)
  • 0.465 in (5)
  • 0.47 in (6)
  • 0.473 in (4)
  • 0.477 in (2)
  • 0.48 in (3)
  • 0.484 in (5)
  • 0.488 in (2)
  • 0.491 in (2)
  • 0.492 in (4)
  • 0.496 in (2)
  • 0.5 in (9)
  • 0.504 in (3)
  • 0.508 in (3)
  • 0.512 in (4)
  • 0.516 in (4)
  • 0.52 in (4)
  • 0.523 in (1)
  • 0.524 in (3)
  • 0.527 in (1)
  • 0.528 in (2)
  • 0.531 in (8)
  • 0.535 in (3)
  • 0.539 in (2)
  • 0.543 in (4)
  • 0.547 in (6)
  • 0.549 in (2)
  • 0.551 in (4)
  • 0.555 in (4)
  • 0.559 in (3)
  • 0.564 in (8)
  • 0.568 in (3)
  • 0.572 in (4)
  • 0.576 in (3)
  • 0.578 in (5)
  • 0.579 in (1)
  • 0.583 in (4)
  • 0.587 in (1)
  • 0.591 in (4)
  • 0.594 in (3)
  • 0.595 in (4)
  • 0.598 in (4)
  • 0.602 in (4)
  • 0.605 in (1)
  • 0.606 in (1)
  • 0.609 in (2)
  • 0.61 in (5)
  • 0.614 in (3)
  • 0.618 in (2)
  • 0.622 in (3)
  • 0.625 in (5)
  • 0.626 in (1)
  • 0.63 in (4)
  • 0.631 in (1)
  • 0.633 in (1)
  • 0.634 in (7)
  • 0.636 in (1)
  • 0.638 in (3)
  • 0.641 in (3)
  • 0.642 in (3)
  • 0.646 in (2)
  • 0.65 in (5)
  • 0.652 in (1)
  • 0.654 in (3)
  • 0.656 in (5)
  • 0.657 in (2)
  • 0.661 in (2)
  • 0.665 in (2)
  • 0.669 in (4)
  • 0.672 in (3)
  • 0.673 in (3)
  • 0.677 in (3)
  • 0.681 in (3)
  • 0.685 in (2)
  • 0.687 in (4)
  • 0.689 in (3)
  • 0.69 in (5)
  • 0.694 in (3)
  • 0.698 in (5)
  • 0.702 in (3)
  • 0.704 in (2)
  • 0.705 in (2)
  • 0.709 in (4)
  • 0.713 in (3)
  • 0.717 in (1)
  • 0.719 in (4)
  • 0.72 in (2)
  • 0.724 in (2)
  • 0.728 in (5)
  • 0.732 in (3)
  • 0.734 in (2)
  • 0.736 in (3)
  • 0.74 in (2)
  • 0.744 in (2)
  • 0.748 in (4)
  • 0.75 in (5)
  • 0.752 in (2)
  • 0.756 in (4)
  • 0.757 in (2)
  • 0.758 in (3)
  • 0.759 in (4)
  • 0.76 in (2)
  • 0.762 in (2)
  • 0.764 in (1)
  • 0.766 in (4)
  • 0.768 in (5)
  • 0.772 in (1)
  • 0.776 in (2)
  • 0.78 in (3)
  • 0.781 in (4)
  • 0.784 in (2)
  • 0.787 in (4)
  • 0.791 in (2)
  • 0.795 in (2)
  • 0.797 in (2)
  • 0.799 in (2)
  • 0.807 in (5)
  • 0.811 in (2)
  • 0.814 in (5)
  • 0.816 in (1)
  • 0.82 in (1)
  • 0.824 in (1)
  • 0.828 in (5)
  • 0.832 in (2)
  • 0.833 in (1)
  • 0.835 in (2)
  • 0.839 in (1)
  • 0.843 in (1)
  • 0.844 in (2)
  • 0.846 in (5)
  • 0.854 in (1)
  • 0.858 in (2)
  • 0.859 in (1)
  • 0.862 in (1)
  • 0.866 in (4)
  • 0.87 in (1)
  • 0.874 in (2)
  • 0.875 in (5)
  • 0.882 in (1)
  • 0.884 in (1)
  • 0.886 in (5)
  • 0.89 in (1)
  • 0.894 in (1)
  • 0.898 in (2)
  • 0.902 in (1)
  • 0.906 in (4)
  • 0.909 in (1)
  • 0.913 in (2)
  • 0.917 in (1)
  • 0.921 in (1)
  • 0.922 in (2)
  • 0.925 in (5)
  • 0.929 in (1)
  • 0.933 in (1)
  • 0.937 in (5)
  • 0.942 in (1)
  • 0.946 in (4)
  • 0.95 in (1)
  • 0.954 in (1)
  • 0.958 in (1)
  • 0.961 in (1)
  • 0.965 in (5)
  • 0.969 in (3)
  • 0.972 in (2)
  • 0.976 in (1)
  • 0.98 in (1)
  • 0.984 in (4)
  • 0.987 in (1)
  • 0.988 in (1)
  • 0.992 in (1)
  • 0.994 in (1)
  • 0.996 in (1)
  • 1.0 in (5)
  • 1.004 in (4)
  • 1.006 in (1)
  • 1.008 in (2)
  • 1.01 in (1)
  • 1.012 in (5)
  • 1.016 in (3)
  • 1.02 in (1)
  • 1.024 in (5)
Dreh-Durchmesser Min bis Dreh-Durchmesser Max
Dreh-Durchmesser
Dreh-Durchmesser
  • 6.0 mm (5)
  • 6.101 mm (1)
  • 6.2 mm (2)
  • 6.301 mm (1)
  • 6.351 mm (7)
  • 6.4 mm (1)
  • 6.5 mm (5)
  • 6.525 mm (2)
  • 6.601 mm (1)
  • 6.625 mm (2)
  • 6.7 mm (1)
  • 6.75 mm (3)
  • 6.801 mm (6)
  • 6.9 mm (2)
  • 7.0 mm (5)
  • 7.101 mm (1)
  • 7.15 mm (2)
  • 7.2 mm (1)
  • 7.301 mm (1)
  • 7.375 mm (1)
  • 7.4 mm (1)
  • 7.5 mm (5)
  • 7.551 mm (1)
  • 7.601 mm (2)
  • 7.7 mm (1)
  • 7.801 mm (2)
  • 7.9 mm (1)
  • 7.95 mm (9)
  • 8.0 mm (5)
  • 8.1 mm (4)
  • 8.175 mm (1)
  • 8.201 mm (4)
  • 8.3 mm (2)
  • 8.326 mm (3)
  • 8.4 mm (2)
  • 8.425 mm (1)
  • 8.5 mm (5)
  • 8.525 mm (1)
  • 8.6 mm (5)
  • 8.701 mm (4)
  • 8.725 mm (3)
  • 8.8 mm (3)
  • 8.85 mm (1)
  • 8.9 mm (3)
  • 9.0 mm (5)
  • 9.1 mm (4)
  • 9.125 mm (1)
  • 9.201 mm (2)
  • 9.3 mm (2)
  • 9.35 mm (2)
  • 9.4 mm (3)
  • 9.5 mm (4)
  • 9.525 mm (8)
  • 9.55 mm (3)
  • 9.601 mm (4)
  • 9.701 mm (4)
  • 9.8 mm (4)
  • 9.9 mm (3)
  • 9.925 mm (3)
  • 10.0 mm (5)
  • 10.025 mm (1)
  • 10.076 mm (1)
  • 10.101 mm (3)
  • 10.201 mm (5)
  • 10.25 mm (1)
  • 10.3 mm (4)
  • 10.326 mm (4)
  • 10.4 mm (3)
  • 10.5 mm (5)
  • 10.601 mm (4)
  • 10.701 mm (4)
  • 10.726 mm (3)
  • 10.8 mm (5)
  • 10.9 mm (3)
  • 11.0 mm (4)
  • 11.101 mm (6)
  • 11.125 mm (7)
  • 11.201 mm (3)
  • 11.3 mm (2)
  • 11.4 mm (2)
  • 11.5 mm (7)
  • 11.601 mm (3)
  • 11.701 mm (2)
  • 11.8 mm (5)
  • 11.9 mm (6)
  • 12.0 mm (4)
  • 12.101 mm (2)
  • 12.201 mm (3)
  • 12.3 mm (5)
  • 12.4 mm (2)
  • 12.476 mm (2)
  • 12.5 mm (4)
  • 12.601 mm (2)
  • 12.701 mm (9)
  • 12.8 mm (3)
  • 12.9 mm (3)
  • 13.0 mm (4)
  • 13.101 mm (4)
  • 13.201 mm (4)
  • 13.275 mm (1)
  • 13.3 mm (3)
  • 13.375 mm (1)
  • 13.4 mm (2)
  • 13.5 mm (8)
  • 13.601 mm (3)
  • 13.701 mm (2)
  • 13.8 mm (4)
  • 13.9 mm (6)
  • 13.951 mm (2)
  • 14.0 mm (4)
  • 14.101 mm (4)
  • 14.201 mm (3)
  • 14.3 mm (8)
  • 14.4 mm (3)
  • 14.5 mm (4)
  • 14.601 mm (3)
  • 14.675 mm (5)
  • 14.701 mm (1)
  • 14.8 mm (4)
  • 14.9 mm (1)
  • 15.0 mm (4)
  • 15.076 mm (3)
  • 15.101 mm (4)
  • 15.201 mm (4)
  • 15.3 mm (4)
  • 15.375 mm (1)
  • 15.4 mm (1)
  • 15.476 mm (2)
  • 15.5 mm (5)
  • 15.601 mm (3)
  • 15.701 mm (2)
  • 15.8 mm (3)
  • 15.875 mm (5)
  • 15.9 mm (1)
  • 16.0 mm (4)
  • 16.026 mm (1)
  • 16.075 mm (1)
  • 16.1 mm (7)
  • 16.151 mm (1)
  • 16.2 mm (3)
  • 16.276 mm (3)
  • 16.3 mm (3)
  • 16.401 mm (2)
  • 16.5 mm (5)
  • 16.55 mm (1)
  • 16.6 mm (3)
  • 16.675 mm (5)
  • 16.7 mm (2)
  • 16.8 mm (2)
  • 16.901 mm (2)
  • 17.0 mm (4)
  • 17.075 mm (3)
  • 17.1 mm (3)
  • 17.2 mm (3)
  • 17.3 mm (3)
  • 17.401 mm (2)
  • 17.45 mm (4)
  • 17.475 mm (3)
  • 17.5 mm (5)
  • 17.6 mm (3)
  • 17.7 mm (5)
  • 17.8 mm (3)
  • 17.85 mm (2)
  • 17.901 mm (2)
  • 18.0 mm (4)
  • 18.1 mm (3)
  • 18.2 mm (1)
  • 18.25 mm (4)
  • 18.3 mm (2)
  • 18.401 mm (2)
  • 18.5 mm (5)
  • 18.6 mm (3)
  • 18.651 mm (2)
  • 18.7 mm (3)
  • 18.8 mm (2)
  • 18.901 mm (2)
  • 19.0 mm (4)
  • 19.05 mm (5)
  • 19.1 mm (2)
  • 19.201 mm (4)
  • 19.225 mm (2)
  • 19.25 mm (3)
  • 19.276 mm (4)
  • 19.3 mm (2)
  • 19.35 mm (2)
  • 19.401 mm (1)
  • 19.451 mm (4)
  • 19.5 mm (5)
  • 19.6 mm (1)
  • 19.701 mm (2)
  • 19.8 mm (3)
  • 19.85 mm (4)
  • 19.901 mm (2)
  • 20.0 mm (4)
  • 20.1 mm (2)
  • 20.201 mm (2)
  • 20.25 mm (2)
  • 20.3 mm (2)
  • 20.5 mm (5)
  • 20.6 mm (2)
  • 20.651 mm (5)
  • 20.701 mm (1)
  • 20.8 mm (1)
  • 20.901 mm (1)
  • 21.0 mm (5)
  • 21.1 mm (2)
  • 21.151 mm (1)
  • 21.201 mm (2)
  • 21.3 mm (1)
  • 21.401 mm (1)
  • 21.425 mm (2)
  • 21.5 mm (5)
  • 21.701 mm (1)
  • 21.8 mm (2)
  • 21.826 mm (1)
  • 21.901 mm (1)
  • 22.0 mm (4)
  • 22.1 mm (1)
  • 22.201 mm (2)
  • 22.225 mm (5)
  • 22.401 mm (1)
  • 22.451 mm (1)
  • 22.5 mm (5)
  • 22.6 mm (1)
  • 22.701 mm (1)
  • 22.8 mm (2)
  • 22.901 mm (1)
  • 23.0 mm (4)
  • 23.1 mm (1)
  • 23.201 mm (2)
  • 23.3 mm (1)
  • 23.401 mm (1)
  • 23.425 mm (2)
  • 23.5 mm (5)
  • 23.6 mm (1)
  • 23.701 mm (1)
  • 23.8 mm (5)
  • 23.901 mm (1)
  • 24.0 mm (4)
  • 24.1 mm (1)
  • 24.201 mm (1)
  • 24.3 mm (1)
  • 24.401 mm (1)
  • 24.5 mm (5)
  • 24.6 mm (3)
  • 24.701 mm (2)
  • 24.8 mm (1)
  • 24.901 mm (1)
  • 25.0 mm (4)
  • 25.076 mm (1)
  • 25.1 mm (1)
  • 25.201 mm (1)
  • 25.25 mm (1)
  • 25.3 mm (1)
  • 25.401 mm (5)
  • 25.5 mm (4)
  • 25.55 mm (1)
  • 25.6 mm (2)
  • 25.651 mm (1)
  • 25.675 mm (4)
  • 25.701 mm (1)
  • 25.8 mm (3)
  • 25.901 mm (1)
  • 26.0 mm (5)
Dreh-Durchmesser Min bis Dreh-Durchmesser Max
application
Minimale Schnitttiefe
Minimaler Vorschub
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
  • KC7325 (175)
  • KC7410 (128)
  • KCC10 (9)
  • KCMS15 (127)
  • KCP15A (307)
  • KN15 (16)
frontEnd
Spitzenwinkel
Spitzenwinkel
  • 128.0 (25)
  • 140.0 (302)
  • 143.0 (374)
  • 180.0 (61)
Spitzenwinkel Min bis Spitzenwinkel Max
insertGeometry
Plattensitzgröße
Plattensitzgröße
  • A (8)
  • B (16)
  • C (15)
  • D (12)
  • E (21)
  • F (22)
  • G (25)
  • H (19)
  • I (33)
  • J (28)
  • K (23)
  • L (24)
  • M (23)
  • N (18)
  • O (21)
  • P (23)
  • Q (21)
  • R (22)
  • S (18)
  • T (42)
  • U (45)
  • V (45)
  • W (33)
  • X (50)
  • Y (28)
  • Z (23)
  • ZA (24)
  • ZB (24)
  • ZC (20)
  • ZD (36)
Schneidstoff
Schneidstoff
  • D P (9)
  • H W (752)
Schnittdurchmesser der Wendeschneidplatte
Schnittdurchmesser der Wendeschneidplatte
  • 0.237 in (5)
  • 0.24 in (1)
  • 0.244 in (2)
  • 0.248 in (1)
  • 0.25 in (7)
  • 0.252 in (1)
  • 0.256 in (5)
  • 0.257 in (2)
  • 0.26 in (1)
  • 0.261 in (2)
  • 0.264 in (1)
  • 0.266 in (3)
  • 0.268 in (6)
  • 0.272 in (2)
  • 0.276 in (5)
  • 0.28 in (1)
  • 0.281 in (2)
  • 0.284 in (1)
  • 0.288 in (1)
  • 0.29 in (1)
  • 0.291 in (1)
  • 0.295 in (5)
  • 0.297 in (1)
  • 0.299 in (2)
  • 0.303 in (1)
  • 0.307 in (2)
  • 0.311 in (1)
  • 0.313 in (9)
  • 0.315 in (5)
  • 0.319 in (4)
  • 0.322 in (1)
  • 0.323 in (4)
  • 0.327 in (2)
  • 0.328 in (3)
  • 0.331 in (2)
  • 0.332 in (1)
  • 0.335 in (5)
  • 0.336 in (1)
  • 0.339 in (5)
  • 0.343 in (4)
  • 0.345 in (3)
  • 0.347 in (3)
  • 0.349 in (1)
  • 0.351 in (3)
  • 0.354 in (5)
  • 0.358 in (4)
  • 0.359 in (1)
  • 0.362 in (2)
  • 0.366 in (2)
  • 0.368 in (2)
  • 0.37 in (3)
  • 0.374 in (4)
  • 0.375 in (8)
  • 0.376 in (3)
  • 0.378 in (4)
  • 0.382 in (4)
  • 0.386 in (4)
  • 0.39 in (3)
  • 0.391 in (3)
  • 0.394 in (5)
  • 0.395 in (1)
  • 0.397 in (1)
  • 0.398 in (3)
  • 0.402 in (5)
  • 0.404 in (1)
  • 0.406 in (4)
  • 0.408 in (4)
  • 0.41 in (3)
  • 0.414 in (5)
  • 0.417 in (4)
  • 0.421 in (4)
  • 0.422 in (3)
  • 0.425 in (5)
  • 0.429 in (3)
  • 0.433 in (4)
  • 0.437 in (6)
  • 0.438 in (7)
  • 0.441 in (3)
  • 0.445 in (2)
  • 0.449 in (2)
  • 0.453 in (7)
  • 0.457 in (3)
  • 0.461 in (2)
  • 0.465 in (5)
  • 0.47 in (6)
  • 0.473 in (4)
  • 0.477 in (2)
  • 0.48 in (3)
  • 0.484 in (5)
  • 0.488 in (2)
  • 0.491 in (2)
  • 0.492 in (4)
  • 0.496 in (2)
  • 0.5 in (9)
  • 0.504 in (3)
  • 0.508 in (3)
  • 0.512 in (4)
  • 0.516 in (4)
  • 0.52 in (4)
  • 0.523 in (1)
  • 0.524 in (3)
  • 0.527 in (1)
  • 0.528 in (2)
  • 0.531 in (8)
  • 0.535 in (3)
  • 0.539 in (2)
  • 0.543 in (4)
  • 0.547 in (6)
  • 0.549 in (2)
  • 0.551 in (4)
  • 0.555 in (4)
  • 0.559 in (3)
  • 0.564 in (8)
  • 0.568 in (3)
  • 0.572 in (4)
  • 0.576 in (3)
  • 0.578 in (5)
  • 0.579 in (1)
  • 0.583 in (4)
  • 0.587 in (1)
  • 0.591 in (4)
  • 0.594 in (3)
  • 0.595 in (4)
  • 0.598 in (4)
  • 0.602 in (4)
  • 0.605 in (1)
  • 0.606 in (1)
  • 0.609 in (2)
  • 0.61 in (5)
  • 0.614 in (3)
  • 0.618 in (2)
  • 0.622 in (3)
  • 0.625 in (5)
  • 0.626 in (1)
  • 0.63 in (4)
  • 0.631 in (1)
  • 0.633 in (1)
  • 0.634 in (7)
  • 0.636 in (1)
  • 0.638 in (3)
  • 0.641 in (3)
  • 0.642 in (3)
  • 0.646 in (2)
  • 0.65 in (5)
  • 0.652 in (1)
  • 0.654 in (3)
  • 0.656 in (5)
  • 0.657 in (2)
  • 0.661 in (2)
  • 0.665 in (2)
  • 0.669 in (4)
  • 0.672 in (3)
  • 0.673 in (3)
  • 0.677 in (3)
  • 0.681 in (3)
  • 0.685 in (2)
  • 0.687 in (4)
  • 0.689 in (3)
  • 0.69 in (5)
  • 0.694 in (3)
  • 0.698 in (5)
  • 0.702 in (3)
  • 0.704 in (2)
  • 0.705 in (2)
  • 0.709 in (4)
  • 0.713 in (3)
  • 0.717 in (1)
  • 0.719 in (4)
  • 0.72 in (2)
  • 0.724 in (2)
  • 0.728 in (5)
  • 0.732 in (3)
  • 0.734 in (2)
  • 0.736 in (3)
  • 0.74 in (2)
  • 0.744 in (2)
  • 0.748 in (4)
  • 0.75 in (5)
  • 0.752 in (2)
  • 0.756 in (4)
  • 0.757 in (2)
  • 0.758 in (3)
  • 0.759 in (4)
  • 0.76 in (2)
  • 0.762 in (2)
  • 0.764 in (1)
  • 0.766 in (4)
  • 0.768 in (5)
  • 0.772 in (1)
  • 0.776 in (2)
  • 0.78 in (3)
  • 0.781 in (4)
  • 0.784 in (2)
  • 0.787 in (4)
  • 0.791 in (2)
  • 0.795 in (2)
  • 0.797 in (2)
  • 0.799 in (2)
  • 0.807 in (5)
  • 0.811 in (2)
  • 0.814 in (5)
  • 0.816 in (1)
  • 0.82 in (1)
  • 0.824 in (1)
  • 0.828 in (5)
  • 0.832 in (2)
  • 0.833 in (1)
  • 0.835 in (2)
  • 0.839 in (1)
  • 0.843 in (1)
  • 0.844 in (2)
  • 0.846 in (5)
  • 0.854 in (1)
  • 0.858 in (2)
  • 0.859 in (1)
  • 0.862 in (1)
  • 0.866 in (4)
  • 0.87 in (1)
  • 0.874 in (2)
  • 0.875 in (5)
  • 0.882 in (1)
  • 0.884 in (1)
  • 0.886 in (5)
  • 0.89 in (1)
  • 0.894 in (1)
  • 0.898 in (2)
  • 0.902 in (1)
  • 0.906 in (4)
  • 0.909 in (1)
  • 0.913 in (2)
  • 0.917 in (1)
  • 0.921 in (1)
  • 0.922 in (2)
  • 0.925 in (5)
  • 0.929 in (1)
  • 0.933 in (1)
  • 0.937 in (5)
  • 0.942 in (1)
  • 0.946 in (4)
  • 0.95 in (1)
  • 0.954 in (1)
  • 0.958 in (1)
  • 0.961 in (1)
  • 0.965 in (5)
  • 0.969 in (3)
  • 0.972 in (2)
  • 0.976 in (1)
  • 0.98 in (1)
  • 0.984 in (4)
  • 0.987 in (1)
  • 0.988 in (1)
  • 0.992 in (1)
  • 0.994 in (1)
  • 0.996 in (1)
  • 1.0 in (5)
  • 1.004 in (4)
  • 1.006 in (1)
  • 1.008 in (2)
  • 1.01 in (1)
  • 1.012 in (5)
  • 1.016 in (3)
  • 1.02 in (1)
  • 1.024 in (5)
Schnittdurchmesser der Wendeschneidplatte Min bis Schnittdurchmesser der Wendeschneidplatte Max
Schnittdurchmesser der Wendeschneidplatte
Schnittdurchmesser der Wendeschneidplatte
  • 6.0 mm (5)
  • 6.101 mm (1)
  • 6.2 mm (2)
  • 6.301 mm (1)
  • 6.351 mm (7)
  • 6.4 mm (1)
  • 6.5 mm (5)
  • 6.525 mm (2)
  • 6.601 mm (1)
  • 6.625 mm (2)
  • 6.7 mm (1)
  • 6.75 mm (3)
  • 6.801 mm (6)
  • 6.9 mm (2)
  • 7.0 mm (5)
  • 7.101 mm (1)
  • 7.15 mm (2)
  • 7.2 mm (1)
  • 7.301 mm (1)
  • 7.375 mm (1)
  • 7.4 mm (1)
  • 7.5 mm (5)
  • 7.551 mm (1)
  • 7.601 mm (2)
  • 7.7 mm (1)
  • 7.801 mm (2)
  • 7.9 mm (1)
  • 7.95 mm (9)
  • 8.0 mm (5)
  • 8.1 mm (4)
  • 8.175 mm (1)
  • 8.201 mm (4)
  • 8.3 mm (2)
  • 8.326 mm (3)
  • 8.4 mm (2)
  • 8.425 mm (1)
  • 8.5 mm (5)
  • 8.525 mm (1)
  • 8.6 mm (5)
  • 8.701 mm (4)
  • 8.725 mm (3)
  • 8.8 mm (3)
  • 8.85 mm (1)
  • 8.9 mm (3)
  • 9.0 mm (5)
  • 9.1 mm (4)
  • 9.125 mm (1)
  • 9.201 mm (2)
  • 9.3 mm (2)
  • 9.35 mm (2)
  • 9.4 mm (3)
  • 9.5 mm (4)
  • 9.525 mm (8)
  • 9.55 mm (3)
  • 9.601 mm (4)
  • 9.701 mm (4)
  • 9.8 mm (4)
  • 9.9 mm (3)
  • 9.925 mm (3)
  • 10.0 mm (5)
  • 10.025 mm (1)
  • 10.076 mm (1)
  • 10.101 mm (3)
  • 10.201 mm (5)
  • 10.25 mm (1)
  • 10.3 mm (4)
  • 10.326 mm (4)
  • 10.4 mm (3)
  • 10.5 mm (5)
  • 10.601 mm (4)
  • 10.701 mm (4)
  • 10.726 mm (3)
  • 10.8 mm (5)
  • 10.9 mm (3)
  • 11.0 mm (4)
  • 11.101 mm (6)
  • 11.125 mm (7)
  • 11.201 mm (3)
  • 11.3 mm (2)
  • 11.4 mm (2)
  • 11.5 mm (7)
  • 11.601 mm (3)
  • 11.701 mm (2)
  • 11.8 mm (5)
  • 11.9 mm (6)
  • 12.0 mm (4)
  • 12.101 mm (2)
  • 12.201 mm (3)
  • 12.3 mm (5)
  • 12.4 mm (2)
  • 12.476 mm (2)
  • 12.5 mm (4)
  • 12.601 mm (2)
  • 12.701 mm (9)
  • 12.8 mm (3)
  • 12.9 mm (3)
  • 13.0 mm (4)
  • 13.101 mm (4)
  • 13.201 mm (4)
  • 13.275 mm (1)
  • 13.3 mm (3)
  • 13.375 mm (1)
  • 13.4 mm (2)
  • 13.5 mm (8)
  • 13.601 mm (3)
  • 13.701 mm (2)
  • 13.8 mm (4)
  • 13.9 mm (6)
  • 13.951 mm (2)
  • 14.0 mm (4)
  • 14.101 mm (4)
  • 14.201 mm (3)
  • 14.3 mm (8)
  • 14.4 mm (3)
  • 14.5 mm (4)
  • 14.601 mm (3)
  • 14.675 mm (5)
  • 14.701 mm (1)
  • 14.8 mm (4)
  • 14.9 mm (1)
  • 15.0 mm (4)
  • 15.076 mm (3)
  • 15.101 mm (4)
  • 15.201 mm (4)
  • 15.3 mm (4)
  • 15.375 mm (1)
  • 15.4 mm (1)
  • 15.476 mm (2)
  • 15.5 mm (5)
  • 15.601 mm (3)
  • 15.701 mm (2)
  • 15.8 mm (3)
  • 15.875 mm (5)
  • 15.9 mm (1)
  • 16.0 mm (4)
  • 16.026 mm (1)
  • 16.075 mm (1)
  • 16.1 mm (7)
  • 16.151 mm (1)
  • 16.2 mm (3)
  • 16.276 mm (3)
  • 16.3 mm (3)
  • 16.401 mm (2)
  • 16.5 mm (5)
  • 16.55 mm (1)
  • 16.6 mm (3)
  • 16.675 mm (5)
  • 16.7 mm (2)
  • 16.8 mm (2)
  • 16.901 mm (2)
  • 17.0 mm (4)
  • 17.075 mm (3)
  • 17.1 mm (3)
  • 17.2 mm (3)
  • 17.3 mm (3)
  • 17.401 mm (2)
  • 17.45 mm (4)
  • 17.475 mm (3)
  • 17.5 mm (5)
  • 17.6 mm (3)
  • 17.7 mm (5)
  • 17.8 mm (3)
  • 17.85 mm (2)
  • 17.901 mm (2)
  • 18.0 mm (4)
  • 18.1 mm (3)
  • 18.2 mm (1)
  • 18.25 mm (4)
  • 18.3 mm (2)
  • 18.401 mm (2)
  • 18.5 mm (5)
  • 18.6 mm (3)
  • 18.651 mm (2)
  • 18.7 mm (3)
  • 18.8 mm (2)
  • 18.901 mm (2)
  • 19.0 mm (4)
  • 19.05 mm (5)
  • 19.1 mm (2)
  • 19.201 mm (4)
  • 19.225 mm (2)
  • 19.25 mm (3)
  • 19.276 mm (4)
  • 19.3 mm (2)
  • 19.35 mm (2)
  • 19.401 mm (1)
  • 19.451 mm (4)
  • 19.5 mm (5)
  • 19.6 mm (1)
  • 19.701 mm (2)
  • 19.8 mm (3)
  • 19.85 mm (4)
  • 19.901 mm (2)
  • 20.0 mm (4)
  • 20.1 mm (2)
  • 20.201 mm (2)
  • 20.25 mm (2)
  • 20.3 mm (2)
  • 20.5 mm (5)
  • 20.6 mm (2)
  • 20.651 mm (5)
  • 20.701 mm (1)
  • 20.8 mm (1)
  • 20.901 mm (1)
  • 21.0 mm (5)
  • 21.1 mm (2)
  • 21.151 mm (1)
  • 21.201 mm (2)
  • 21.3 mm (1)
  • 21.401 mm (1)
  • 21.425 mm (2)
  • 21.5 mm (5)
  • 21.701 mm (1)
  • 21.8 mm (2)
  • 21.826 mm (1)
  • 21.901 mm (1)
  • 22.0 mm (4)
  • 22.1 mm (1)
  • 22.201 mm (2)
  • 22.225 mm (5)
  • 22.401 mm (1)
  • 22.451 mm (1)
  • 22.5 mm (5)
  • 22.6 mm (1)
  • 22.701 mm (1)
  • 22.8 mm (2)
  • 22.901 mm (1)
  • 23.0 mm (4)
  • 23.1 mm (1)
  • 23.201 mm (2)
  • 23.3 mm (1)
  • 23.401 mm (1)
  • 23.425 mm (2)
  • 23.5 mm (5)
  • 23.6 mm (1)
  • 23.701 mm (1)
  • 23.8 mm (5)
  • 23.901 mm (1)
  • 24.0 mm (4)
  • 24.1 mm (1)
  • 24.201 mm (1)
  • 24.3 mm (1)
  • 24.401 mm (1)
  • 24.5 mm (5)
  • 24.6 mm (3)
  • 24.701 mm (2)
  • 24.8 mm (1)
  • 24.901 mm (1)
  • 25.0 mm (4)
  • 25.076 mm (1)
  • 25.1 mm (1)
  • 25.201 mm (1)
  • 25.25 mm (1)
  • 25.3 mm (1)
  • 25.401 mm (5)
  • 25.5 mm (4)
  • 25.55 mm (1)
  • 25.6 mm (2)
  • 25.651 mm (1)
  • 25.675 mm (4)
  • 25.701 mm (1)
  • 25.8 mm (3)
  • 25.901 mm (1)
  • 26.0 mm (5)
Schnittdurchmesser der Wendeschneidplatte Min bis Schnittdurchmesser der Wendeschneidplatte Max
No filters matching ""

KenTIP™ FS • Schneidkörper• HPG-Geometrie

(246) KenTIP™ FS • Schneidkörper• HPG-Geometrie

KenTIP™ FS • Schneidkörper • HPL-Geometrie

(127) KenTIP™ FS • Schneidkörper • HPL-Geometrie

KenTIP™ FS • Schneidkörper • HPC-Geometrie

(128) KenTIP™ FS • Schneidkörper • HPC-Geometrie

KenTIP™ FS • Schneidkörper• GTP-Geometrie

(175) KenTIP™ FS • Schneidkörper• GTP-Geometrie

KenTIP™ FS • Schneidkörper • FEG-Geometrie

(61) KenTIP™ FS • Schneidkörper • FEG-Geometrie

KenTIP FS SCHNEIDEN • DAL

(15) KenTIP FS SCHNEIDEN • DAL

KenTIP™ FS • Schneidkörper • SPF-Geometrie

(5) KenTIP™ FS • Schneidkörper • SPF-Geometrie

KenTIP™ FS • Schneidkörper • DAV-Geometrie

(5) KenTIP™ FS • Schneidkörper • DAV-Geometrie
Sie sind im Begriff, zu Ihrer MySolutions-Seite hinzuzufügen.. Möchten Sie fortfahren?
product-image
Please adjust the following properties from

ISO Katalog

ANSI Katalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Sie sollten angemeldet sein, um Ihre Dashboard-Informationen zu sehen
Session expired due to inactivity, please login again
Das/die Produkt/e (), das/die Sie dem Warenkorb hinzufügen wollten, ist/sind nicht verfügbar. Bitte wenden Sie sich an den Kundendienst.
Artikel erfolgreich zum Warenkorb hinzugefügt
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Katalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Vielen Dank für Ihre erfolgreiche Registrierung. Sie können sich nun sofort einloggen und die Website nutzen.

You are about to leave the Solution building process.

Are you sure you want to leave?