Drills
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (15)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
- M Stainless Steel (15)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(15)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(15)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(15)
- K Cast Iron (15)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
- N Non-Ferrous Materials (15)
- N1Wrought Aluminum (15)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(15)
- N3High-Silicon Aluminum Alloys Si >12.2%(15)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (15)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (15)
- N6Carbon, Graphite Composites, CFRP (15)
- N7MMC's (15)
- S High-Temp Alloys (15)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(15)
- H Hardened Materials (13)
- H1Hardened Materials 44-48 HRC(13)
- H2Hardened Materials 48-55 HRC(13)
- H3Hardened Materials 56-60 HRC(13)
- H4Hardened Materials >60 HRC(13)
Applications
Applications
Convex Drilling (4)
Drilling (4)
Inclined Entry Drilling (4)
Inclined Exit Drilling (4)
X-Offset Drilling (4)
Cutting Diameter
Cutting Diameter
- 0.625 in(1)
- 0.687 in(1)
- 0.75 in(1)
- 0.814 in(1)
- 0.875 in(1)
- 0.937 in(1)
- 1.0 in(1)
- 1.125 in(1)
- 1.25 in(1)
- 1.375 in(1)
- 1.5 in(1)
- 1.625 in(1)
- 1.75 in(1)
- 1.875 in(1)
- 2.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 15.875 mm(1)
- 17.45 mm(1)
- 19.05 mm(1)
- 20.651 mm(1)
- 22.225 mm(1)
- 23.8 mm(1)
- 25.401 mm(1)
- 28.576 mm(1)
- 31.75 mm(1)
- 34.926 mm(1)
- 38.1 mm(1)
- 41.276 mm(1)
- 44.45 mm(1)
- 47.625 mm(1)
- 50.801 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 47.625 mm(1)
- 52.401 mm(1)
- 57.151 mm(1)
- 61.901 mm(1)
- 66.675 mm(1)
- 71.45 mm(1)
- 76.2 mm(1)
- 85.726 mm(1)
- 95.25 mm(1)
- 104.775 mm(1)
- 114.301 mm(1)
- 123.825 mm(1)
- 133.35 mm(1)
- 142.875 mm(1)
- 152.4 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.875 in(1)
- 2.063 in(1)
- 2.25 in(1)
- 2.437 in(1)
- 2.625 in(1)
- 2.813 in(1)
- 3.0 in(1)
- 3.375 in(1)
- 3.75 in(1)
- 4.125 in(1)
- 4.5 in(1)
- 4.875 in(1)
- 5.25 in(1)
- 5.625 in(1)
- 6.0 in(1)
to
Reach
Reach
- 2.52 in(1)
- 2.835 in(1)
- 2.992 in(1)
- 3.189 in(1)
- 3.386 in(1)
- 3.543 in(1)
- 3.74 in(1)
- 4.213 in(1)
- 4.606 in(1)
- 5.079 in(1)
- 5.472 in(1)
- 6.22 in(1)
- 6.575 in(1)
- 7.165 in(1)
- 7.521 in(1)
to
Reach
Reach
- 64.0 mm(1)
- 72.0 mm(1)
- 76.0 mm(1)
- 81.0 mm(1)
- 86.0 mm(1)
- 90.0 mm(1)
- 95.0 mm(1)
- 107.0 mm(1)
- 117.0 mm(1)
- 129.0 mm(1)
- 139.0 mm(1)
- 158.0 mm(1)
- 167.0 mm(1)
- 182.0 mm(1)
- 191.0 mm(1)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (9)
- 3.0 (15)
to
Over All Length [L]
Over All Length [L]
- 4.906 in(1)
- 5.094 in(1)
- 5.281 in(1)
- 5.469 in(1)
- 5.656 in(1)
- 5.844 in(1)
- 6.008 in(1)
- 6.508 in(1)
- 6.883 in(1)
- 7.37 in(1)
- 7.758 in(1)
- 8.496 in(1)
- 8.871 in(1)
- 9.443 in(1)
- 9.818 in(1)
to
Over All Length [L]
Over All Length [L]
- 124.625 mm(1)
- 129.4 mm(1)
- 134.15 mm(1)
- 138.925 mm(1)
- 143.675 mm(1)
- 148.425 mm(1)
- 152.6 mm(1)
- 165.3 mm(1)
- 174.826 mm(1)
- 187.201 mm(1)
- 197.05 mm(1)
- 215.8 mm(1)
- 225.326 mm(1)
- 239.851 mm(1)
- 249.375 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (13)
- K6 (5)
- KC7140 (15)
- KC720 (15)
- KC7215 (13)
- KC7225 (12)
- KC7815 (12)
- KC7820 (7)
- KC7845 (5)
- KC7935 (12)
- KC810 (11)
- KC990 (12)
- KCMS35 (12)
- KCPK10 (15)
- KCU25 (15)
- KCU40 (15)
- KD1425 (13)
- KMF (15)
- KU40D (12)
Back-End
System Size
System Size
- KM50 (11)
- KM50TS (4)
No filters matching ""
