Round Inserts for Daisy KSRM RCGT2006-LF 3033394 RCGT2006M0ELF

Feeds

At 10,00 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LFJ	0,12	0,44	0,87	0,09	0,32	0,62	0,07	0,24	0,47	0,06	0,21	0,41	0,05	0,19	0,37	.E..LFJ
.E..LF	0,12	0,44	0,87	0,09	0,32	0,62	0,07	0,24	0,47	0,06	0,21	0,41	0,05	0,19	0,37	.E..LF
.S..GFJ	0,23	0,52	0,93	0,17	0,38	0,67	0,13	0,28	0,50	0,11	0,24	0,43	0,10	0,22	0,40	.S..GFJ
.S..GF	0,23	0,52	0,93	0,17	0,38	0,67	0,13	0,28	0,50	0,11	0,24	0,43	0,10	0,22	0,40	.S..GF
.S..HFJ	0,23	0,59	1,01	0,17	0,42	0,72	0,13	0,32	0,54	0,11	0,28	0,47	0,10	0,25	0,43	.S..HFJ
.S..HF	0,23	0,59	1,01	0,17	0,42	0,72	0,13	0,32	0,54	0,11	0,28	0,47	0,10	0,25	0,43	.S..HF

At 3,80 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

At 2,00 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LFJ	0,16	0,56	1,11	0,11	0,40	0,80	0,09	0,30	0,59	0,07	0,26	0,52	0,07	0,24	0,47	.E..LFJ
.E..LF	0,16	0,56	1,11	0,11	0,40	0,80	0,09	0,30	0,59	0,07	0,26	0,52	0,07	0,24	0,47	.E..LF
.S..GFJ	0,30	0,66	1,18	0,22	0,48	0,85	0,16	0,36	0,64	0,14	0,31	0,55	0,13	0,29	0,51	.S..GFJ
.S..GF	0,30	0,66	1,18	0,22	0,48	0,85	0,16	0,36	0,64	0,14	0,31	0,55	0,13	0,29	0,51	.S..GF
.S..HFJ	0,30	0,75	1,29	0,22	0,54	0,92	0,16	0,41	0,69	0,14	0,35	0,60	0,13	0,32	0,55	.S..HFJ
.S..HF	0,30	0,75	1,29	0,22	0,54	0,92	0,16	0,41	0,69	0,14	0,35	0,60	0,13	0,32	0,55	.S..HF

At 1,30 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LFJ	0,25	0,90	1,78	0,18	0,65	1,27	0,14	0,48	0,95	0,12	0,42	0,83	0,11	0,39	0,76	.E..LFJ
.E..LF	0,25	0,90	1,78	0,18	0,65	1,27	0,14	0,48	0,95	0,12	0,42	0,83	0,11	0,39	0,76	.E..LF
.S..GFJ	0,48	1,06	1,90	0,34	0,76	1,36	0,26	0,57	1,01	0,22	0,50	0,88	0,21	0,46	0,81	.S..GFJ
.S..GF	0,48	1,06	1,90	0,34	0,76	1,36	0,26	0,57	1,01	0,22	0,50	0,88	0,21	0,46	0,81	.S..GF
.S..HFJ	0,48	1,20	2,07	0,34	0,86	1,48	0,26	0,65	1,10	0,22	0,56	0,96	0,21	0,52	0,88	.S..HFJ
.S..HF	0,48	1,20	2,07	0,34	0,86	1,48	0,26	0,65	1,10	0,22	0,56	0,96	0,21	0,52	0,88	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LFJ	0,21	0,73	1,46	0,15	0,53	1,04	0,11	0,40	0,78	0,10	0,35	0,68	0,09	0,32	0,62	.E..LFJ
.E..LF	0,21	0,73	1,46	0,15	0,53	1,04	0,11	0,40	0,78	0,10	0,35	0,68	0,09	0,32	0,62	.E..LF
.S..GFJ	0,39	0,87	1,56	0,28	0,63	1,12	0,21	0,47	0,83	0,18	0,41	0,72	0,17	0,37	0,66	.S..GFJ
.S..GF	0,39	0,87	1,56	0,28	0,63	1,12	0,21	0,47	0,83	0,18	0,41	0,72	0,17	0,37	0,66	.S..GF
.S..HFJ	0,39	0,99	1,69	0,28	0,71	1,21	0,21	0,53	0,90	0,18	0,46	0,79	0,17	0,42	0,72	.S..HFJ
.S..HF	0,39	0,99	1,69	0,28	0,71	1,21	0,21	0,53	0,90	0,18	0,46	0,79	0,17	0,42	0,72	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LFJ	0,16	0,56	1,11	0,11	0,40	0,80	0,09	0,30	0,59	0,07	0,26	0,52	0,07	0,24	0,47	.E..LFJ
.E..LF	0,16	0,56	1,11	0,11	0,40	0,80	0,09	0,30	0,59	0,07	0,26	0,52	0,07	0,24	0,47	.E..LF
.S..GFJ	0,30	0,66	1,18	0,22	0,48	0,85	0,16	0,36	0,64	0,14	0,31	0,55	0,13	0,29	0,51	.S..GFJ
.S..GF	0,30	0,66	1,18	0,22	0,48	0,85	0,16	0,36	0,64	0,14	0,31	0,55	0,13	0,29	0,51	.S..GF
.S..HFJ	0,30	0,75	1,29	0,22	0,54	0,92	0,16	0,41	0,69	0,14	0,35	0,60	0,13	0,32	0,55	.S..HFJ
.S..HF	0,30	0,75	1,29	0,22	0,54	0,92	0,16	0,41	0,69	0,14	0,35	0,60	0,13	0,32	0,55	.S..HF

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LFJ	0,25	0,90	1,78	0,18	0,65	1,27	0,14	0,48	0,95	0,12	0,42	0,83	0,11	0,39	0,76	.E..LFJ
.E..LF	0,25	0,90	1,78	0,18	0,65	1,27	0,14	0,48	0,95	0,12	0,42	0,83	0,11	0,39	0,76	.E..LF
.S..GFJ	0,48	1,06	1,90	0,34	0,76	1,36	0,26	0,57	1,01	0,22	0,50	0,88	0,21	0,46	0,81	.S..GFJ
.S..GF	0,48	1,06	1,90	0,34	0,76	1,36	0,26	0,57	1,01	0,22	0,50	0,88	0,21	0,46	0,81	.S..GF
.S..HFJ	0,48	1,20	2,07	0,34	0,86	1,48	0,26	0,65	1,10	0,22	0,56	0,96	0,21	0,52	0,88	.S..HFJ
.S..HF	0,48	1,20	2,07	0,34	0,86	1,48	0,26	0,65	1,10	0,22	0,56	0,96	0,21	0,52	0,88	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LFJ	0,21	0,73	1,46	0,15	0,53	1,04	0,11	0,40	0,78	0,10	0,35	0,68	0,09	0,32	0,62	.E..LFJ
.E..LF	0,21	0,73	1,46	0,15	0,53	1,04	0,11	0,40	0,78	0,10	0,35	0,68	0,09	0,32	0,62	.E..LF
.S..GFJ	0,39	0,87	1,56	0,28	0,63	1,12	0,21	0,47	0,83	0,18	0,41	0,72	0,17	0,37	0,66	.S..GFJ
.S..GF	0,39	0,87	1,56	0,28	0,63	1,12	0,21	0,47	0,83	0,18	0,41	0,72	0,17	0,37	0,66	.S..GF
.S..HFJ	0,39	0,99	1,69	0,28	0,71	1,21	0,21	0,53	0,90	0,18	0,46	0,79	0,17	0,42	0,72	.S..HFJ
.S..HF	0,39	0,99	1,69	0,28	0,71	1,21	0,21	0,53	0,90	0,18	0,46	0,79	0,17	0,42	0,72	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LFJ	0,12	0,44	0,87	0,09	0,32	0,62	0,07	0,24	0,47	0,06	0,21	0,41	0,05	0,19	0,37	.E..LFJ
.E..LF	0,12	0,44	0,87	0,09	0,32	0,62	0,07	0,24	0,47	0,06	0,21	0,41	0,05	0,19	0,37	.E..LF
.S..GFJ	0,23	0,52	0,93	0,17	0,38	0,67	0,13	0,28	0,50	0,11	0,24	0,43	0,10	0,22	0,40	.S..GFJ
.S..GF	0,23	0,52	0,93	0,17	0,38	0,67	0,13	0,28	0,50	0,11	0,24	0,43	0,10	0,22	0,40	.S..GF
.S..HFJ	0,23	0,59	1,01	0,17	0,42	0,72	0,13	0,32	0,54	0,11	0,28	0,47	0,10	0,25	0,43	.S..HFJ
.S..HF	0,23	0,59	1,01	0,17	0,42	0,72	0,13	0,32	0,54	0,11	0,28	0,47	0,10	0,25	0,43	.S..HF

At .394 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.E..LF	.004	.007	.013	.003	.005	.009	.002	.004	.008	.002	.004	.008	.002	.004	.008	.E..LF
.S..GF	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..GF
.S..HF	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..HF

At .197 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

At .098 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.E..LF	.004	.008	.015	.003	.006	.011	.003	.005	.009	.003	.005	.009	.002	.005	.009	.E..LF
.S..GF	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..GF
.S..HF	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..HF

At .049 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert
	10%			20%			30%			40%			50–100%			Geometry
.E..LF	.007	.014	.027	.005	.011	.020	.005	.009	.017	.004	.009	.016	.004	.008	.015	.E..LF
.S..GF	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..GF
.S..HF	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.E..LF	.005	.010	.019	.004	.008	.014	.004	.007	.012	.003	.006	.012	.003	.006	.011	.E..LF
.S..GF	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..GF
.S..HF	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..LF	.005	.010	.019	.004	.008	.014	.004	.007	.012	.003	.006	.012	.003	.006	.011	.E..LF
.S..GF	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..GF
.S..HF	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..LF	.004	.008	.015	.003	.006	.011	.003	.005	.009	.003	.005	.009	.002	.005	.009	.E..LF
.S..GF	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..GF
.S..HF	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..HF

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..LF	.007	.014	.027	.005	.011	.020	.005	.009	.017	.004	.009	.016	.004	.008	.015	.E..LF
.S..GF	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..GF
.S..HF	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..HF

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..LF	.004	.007	.013	.003	.005	.009	.002	.004	.008	.002	.004	.008	.002	.004	.008	.E..LF
.S..GF	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..GF
.S..HF	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..HF

View MoreView Less

Speeds

Recommended Starting Speeds [m/min]

Material Group		KC522M			KC725M			KCPK30
P	1	395	345	325	315	275	255	545	475	440
	2	330	290	240	260	230	195	335	305	275
	3	305	255	215	240	205	170	305	275	250
	4	270	225	180	215	180	145	225	210	190
	5	225	200	180	180	160	145	310	275	255
	6	200	150	120	160	120	95	190	165	–
M	1	245	215	200	205	180	165	250	220	190
	2	225	190	160	185	160	130	225	195	170
	3	170	145	115	140	120	95	175	160	140
K	1	–	–	–	–	–	–	355	320	285
	2	–	–	–	–	–	–	280	255	230
	3	–	–	–	–	–	–	235	210	195
N	1–2	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–
S	1	50	45	35	45	35	30	–	–	–
	2	50	45	35	45	35	30	–	–	–
	3	60	50	35	55	45	30	–	–	–
	4	85	60	45	75	55	35	–	–	–
H	1	–	–	–	–	–	–	–	–	–

Material Group		KC522M			KC725M			KCPK30
P	1	395	345	325	315	275	255	545	475	440
	2	330	290	240	260	230	195	335	305	275
	3	305	255	215	240	205	170	305	275	250
	4	270	225	180	215	180	145	225	210	190
	5	225	200	180	180	160	145	310	275	255
	6	200	150	120	160	120	95	190	165	–
M	1	245	215	200	205	180	165	250	220	190
	2	225	190	160	185	160	130	225	195	170
	3	170	145	115	140	120	95	175	160	140
K	1	–	–	–	–	–	–	355	320	285
	2	–	–	–	–	–	–	280	255	230
	3	–	–	–	–	–	–	235	210	195
N	1–2	–	–	–	–	–	–	–	–	–
N	3	–	–	–	–	–	–	–	–	–
S	1	50	45	35	45	35	30	–	–	–
	2	50	45	35	45	35	30	–	–	–
	3	60	50	35	55	45	30	–	–	–
	4	85	60	45	75	55	35	–	–	–
H	1	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		KC522M			KC725M			KCPK30
P	1	1300	1130	1060	1030	900	840	1780	1560	1450
	2	1080	950	790	860	760	640	1100	1000	900
	3	1000	840	700	790	670	550	1000	900	820
	4	890	730	590	710	590	470	740	690	620
	5	730	660	590	590	530	470	1020	910	830
	6	650	490	400	520	400	310	620	540	–
M	1	800	710	650	670	590	540	820	720	620
	2	730	620	520	610	520	430	730	640	550
	3	550	480	370	460	400	310	570	520	460
K	1	900	820	720	–	–	–	1160	1050	940
	2	710	640	590	–	–	–	920	830	760
	3	590	530	480	–	–	–	770	690	640
N	1–2	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–
S	1	160	140	110	140	120	100	–	–	–
	2	160	140	110	140	120	100	–	–	–
	3	200	160	110	180	140	100	–	–	–
	4	280	200	140	240	180	120	–	–	–
H	1	–	–	–	–	–	–	–	–	–

Material Group		KC522M			KC725M			KCPK30
P	1	1300	1130	1060	1030	900	840	1780	1560	1450
	2	1080	950	790	860	760	640	1100	1000	900
	3	1000	840	700	790	670	550	1000	900	820
	4	890	730	590	710	590	470	740	690	620
	5	730	660	590	590	530	470	1020	910	830
	6	650	490	400	520	400	310	620	540	–
M	1	800	710	650	670	590	540	820	720	620
	2	730	620	520	610	520	430	730	640	550
	3	550	480	370	460	400	310	570	520	460
K	1	900	820	720	–	–	–	1160	1050	940
	2	710	640	590	–	–	–	920	830	760
	3	590	530	480	–	–	–	770	690	640
N	1–2	–	–	–	–	–	–	–	–	–
N	3	–	–	–	–	–	–	–	–	–
S	1	160	140	110	140	120	100	–	–	–
	2	160	140	110	140	120	100	–	–	–
	3	200	160	110	180	140	100	–	–	–
	4	280	200	140	240	180	120	–	–	–
H	1	–	–	–	–	–	–	–	–	–

View MoreView Less

Insert Selection

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance				toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..LF	KC725M	.S..GFJ	KCPM40	.S..HFJ	KCPM40
P3–P4	.E..LF	KC725M	.S..GFJ	KCPM40	.S..HFJ	KCPM40
P5–P6	.E..LF	KC725M	.S..GF	KC725M	.S..HF	KC725M
M1–M2	.E..LF	KCSM40	.S..GF	KC522M	.S..HF	KCSM40
M3	.E..LF	KCSM40	.S..GFJ	KCPM40	.S..HF	KCSM40
K1–K2	–	–	–	–	–	–
K3	.S..HF	KCPK30	.S..HF	KCPK30	.S..HF	KCPK30
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..LF	KCSM40	.S..GF	KC725M	.S..HF	KCSM40
S3	.E..LF	KCSM40	.S..GFJ	KCPM40	.S..HF	KCSM40
S4	.E..LF	KCSM40	.S..GF	KC522M	.S..HF	KCSM40
H1	–	–	–	–	–	–

Material Group	Light Machining		General Purpose		Heavy Machining
	(Light geometry)		General Purpose		(Strong geometry)
	wear resistance				toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..LF	KC725M	.S..GFJ	KCPM40	.S..HFJ	KCPM40
P3–P4	.E..LF	KC725M	.S..GFJ	KCPM40	.S..HFJ	KCPM40
P5–P6	.E..LF	KC725M	.S..GF	KC725M	.S..HF	KC725M
M1–M2	.E..LF	KCSM40	.S..GF	KC522M	.S..HF	KCSM40
M3	.E..LF	KCSM40	.S..GFJ	KCPM40	.S..HF	KCSM40
K1–K2	–	–	–	–	–	–
K3	.S..HF	KCPK30	.S..HF	KCPK30	.S..HF	KCPK30
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..LF	KCSM40	.S..GF	KC725M	.S..HF	KCSM40
S3	.E..LF	KCSM40	.S..GFJ	KCPM40	.S..HF	KCSM40
S4	.E..LF	KCSM40	.S..GF	KC522M	.S..HF	KCSM40
H1	–	–	–	–	–	–

View MoreView Less

You are about to leave the Solution building process.

Are you sure you want to leave?

Material Number	3033394
ISO Catalog ID	RCGT2006M0ELF
ANSI Catalog ID	RCGT2006M0ELF
Grade	KC725M
[D] Insert IC Size	20 mm
[D] Insert IC Size	0.787 in
[S] Insert Thickness	6.35 mm
[S] Insert Thickness	0.25 in
Average Chip Thickness [HM]	0.038 mm
Average Chip Thickness [HM]	0.0015 in
Insert Number of Indexes	6

Welcome

Please confirm your preferences

Update Preferences

Product Suggestions

Product Family suggestions

Message Sales

Nachricht an Vertriebsteam

Editing Solution

Adding Solution

Product Similar To :

KSRM™ 20 • Carbide Insert • RCGT-LF • Light Machining

Copy milling insert with six cutting edges, precision ground.

Material Number3033394

ISO Catalog IDRCGT2006M0ELFANSI Catalog IDRCGT2006M0ELF

Workpiece Materials

Features and benefits

Feeds

At 10,00 Axial Depth of Cut (ap)

At 3,80 Axial Depth of Cut (ap)

At 2,00 Axial Depth of Cut (ap)

At 1,30 Axial Depth of Cut (ap)

At .394 Axial Depth of Cut (ap)

At .197 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .049 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Insert Selection

Product Suggestions

Product Family suggestions

Message Sales

Notifications

Nachricht an Vertriebsteam

Product Similar To :

KSRM™ 20 • Carbide Insert • RCGT-LF • Light Machining

Copy milling insert with six cutting edges, precision ground.

Material Number3033394

ISO Catalog IDRCGT2006M0ELFANSI Catalog IDRCGT2006M0ELF

Sending to {{cadTool}} in progress...

Workpiece Materials

Features and benefits

Feeds

At 10,00 Axial Depth of Cut (ap)

At 3,80 Axial Depth of Cut (ap)

At 2,00 Axial Depth of Cut (ap)

At 1,30 Axial Depth of Cut (ap)

At .394 Axial Depth of Cut (ap)

At .197 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .049 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Insert Selection

The following files are available