KM40TS™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (304)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(304)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(304)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(304)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(304)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(304)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(304)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(304)
- M Stainless Steel (304)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(304)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(304)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(304)
- K Cast Iron (304)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(304)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(304)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(304)
- N Non-Ferrous Materials (296)
- N1Wrought Aluminum (294)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(294)
- N3High-Silicon Aluminum Alloys Si >12.2%(209)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (296)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (281)
- N6Carbon, Graphite Composites, CFRP (281)
- N7MMC's (271)
- S High-Temp Alloys (303)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(303)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(303)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(303)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(303)
- H Hardened Materials (246)
- H1Hardened Materials 44-48 HRC(246)
- H2Hardened Materials 48-55 HRC(246)
- H3Hardened Materials 56-60 HRC(246)
- H4Hardened Materials >60 HRC(240)
Applications
Applications
Chamfer Turning (8)
Cut-Off (6)
Deep Grooving (6)
Face Grooving (6)
Facing (150)
Grooving (32)
ID Facing (4)
ID Grooving (22)
ID Thread Turning (43)
Multiple Direction Cutting (189)
OD Thread Turning (39)
Plunge Turning (10)
Profiling (168)
TRN Boring (181)
Turning (195)
Type of Thread
Type of Thread
- 55 (16)
- 60 (54)
- ACME (27)
- API (22)
- API BUTTRESS (4)
- API RD (21)
- BSPT (8)
- BSW (32)
- BUTTRESS (34)
- M (27)
- NPT (23)
- NPTF (8)
- RD DIN 405 (13)
- STUB ACME (27)
- TR DIN 103 (12)
- UN (49)
- UNJ (23)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (278)
- Lightly Interrupted Cut (283)
- Smooth Cut (283)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (14)
- 62.5 (3)
- 63.0 (2)
- 72.5 (2)
- 75.0 (21)
- 90.0 (90)
- 93.0 (87)
- 95.0 (67)
- 107.5 (20)
to
Connection Style
Connection Style
- KM (208)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (204)
- 2.0 (193)
- 3.0 (77)
- 4.0 (144)
- 6.0 (42)
- 8.0 (57)
to
Over All Length [L]
Over All Length [L]
- 1.5748 in(47)
- 1.575 in(83)
- 1.7717 in(18)
- 1.772 in(22)
- 1.85 in(3)
- 1.8504 in(3)
- 1.9685 in(10)
- 1.969 in(7)
- 2.362 in(1)
- 2.3622 in(5)
- 2.7559 in(25)
- 3.1496 in(11)
- 3.543 in(2)
- 3.5433 in(28)
- 3.937 in(19)
- 4.3307 in(18)
- 5.5118 in(4)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(130)
- 45.0 mm(40)
- 47.0 mm(6)
- 50.0 mm(17)
- 60.0 mm(6)
- 70.0 mm(25)
- 80.0 mm(11)
- 90.0 mm(30)
- 100.0 mm(19)
- 110.0 mm(18)
- 140.0 mm(4)
to
Corner Radius
Corner Radius
- 0.0 in(6)
- 0.001 in(11)
- 0.002 in(32)
- 0.003 in(47)
- 0.004 in(183)
- 0.005 in(14)
- 0.006 in(27)
- 0.007 in(26)
- 0.008 in(212)
- 0.009 in(16)
- 0.01 in(27)
- 0.011 in(9)
- 0.012 in(18)
- 0.013 in(18)
- 0.014 in(41)
- 0.016 in(255)
- 0.017 in(3)
- 0.018 in(16)
- 0.019 in(7)
- 0.02 in(30)
- 0.021 in(2)
- 0.023 in(18)
- 0.024 in(16)
- 0.026 in(1)
- 0.028 in(5)
- 0.03 in(17)
- 0.031 in(272)
- 0.035 in(18)
- 0.036 in(2)
- 0.038 in(1)
- 0.039 in(31)
- 0.047 in(242)
- 0.049 in(30)
- 0.055 in(2)
- 0.059 in(30)
- 0.062 in(14)
- 0.063 in(185)
- 0.069 in(30)
- 0.078 in(14)
- 0.079 in(16)
- 0.089 in(14)
- 0.094 in(32)
- 0.098 in(4)
- 0.125 in(14)
- 0.126 in(10)
- 0.157 in(1)
- 0.197 in(2)
- 0.236 in(2)
- 0.25 in(2)
to
Corner Radius
Corner Radius
- 0.0 mm(6)
- 0.025 mm(11)
- 0.05 mm(32)
- 0.075 mm(47)
- 0.1 mm(183)
- 0.125 mm(14)
- 0.15 mm(27)
- 0.175 mm(26)
- 0.2 mm(212)
- 0.225 mm(16)
- 0.25 mm(27)
- 0.275 mm(9)
- 0.3 mm(18)
- 0.325 mm(18)
- 0.35 mm(41)
- 0.4 mm(255)
- 0.425 mm(3)
- 0.45 mm(16)
- 0.475 mm(7)
- 0.5 mm(30)
- 0.525 mm(2)
- 0.575 mm(18)
- 0.6 mm(16)
- 0.65 mm(1)
- 0.7 mm(5)
- 0.75 mm(17)
- 0.775 mm(30)
- 0.8 mm(242)
- 0.9 mm(18)
- 0.925 mm(2)
- 0.975 mm(1)
- 1.0 mm(31)
- 1.2 mm(242)
- 1.25 mm(30)
- 1.4 mm(2)
- 1.5 mm(30)
- 1.575 mm(14)
- 1.6 mm(185)
- 1.75 mm(30)
- 1.975 mm(14)
- 2.0 mm(16)
- 2.25 mm(14)
- 2.375 mm(4)
- 2.4 mm(32)
- 2.5 mm(4)
- 3.175 mm(14)
- 3.2 mm(10)
- 4.0 mm(1)
- 5.0 mm(2)
- 6.0 mm(2)
- 6.35 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG5 (25)
- CG6 (9)
- CM1 (9)
- CW2015 (118)
- CW5025 (77)
- K00326 (8)
- K060 (31)
- K090 (20)
- K313 (240)
- K420 (34)
- K68 (204)
- K8735 (8)
- KB1340 (59)
- KB1345 (87)
- KB1610 (133)
- KB1630 (106)
- KB5610 (80)
- KB5630 (89)
- KBH10 (140)
- KBH10B (182)
- KBH20 (189)
- KBH20B (178)
- KC5010 (293)
- KC5025 (297)
- KC5410 (223)
- KC720 (37)
- KC730 (235)
- KC850 (266)
- KC9110 (2)
- KCK05 (197)
- KCK05B (93)
- KCK15 (201)
- KCK15B (221)
- KCK20 (245)
- KCK20B (237)
- KCM15 (214)
- KCM15B (195)
- KCM25 (240)
- KCM25B (216)
- KCM25S (6)
- KCM35 (175)
- KCM35B (110)
- KCP05 (173)
- KCP05B (156)
- KCP10 (233)
- KCP10B (267)
- KCP10C (6)
- KCP15 (4)
- KCP20S (6)
- KCP25 (233)
- KCP25B (275)
- KCP25C (283)
- KCP30 (200)
- KCP30B (121)
- KCP40 (138)
- KCP40B (149)
- KCPK05 (152)
- KCS10 (102)
- KCS10B (217)
- KCS25S (6)
- KCU10 (280)
- KCU10B (283)
- KCU25 (272)
- KCU25B (280)
- KD1400 (132)
- KD1405 (87)
- KD1425 (166)
- KN10S (6)
- KS15 (39)
- KT315 (246)
- KT325 (45)
- KTP10 (181)
- KTP25S (129)
- KY1540 (31)
- KY1615 (3)
- KY3500 (135)
- KY4300 (56)
- KY4400 (140)
- KYHK15B (146)
- KYK10 (84)
- KYK25 (93)
- KYS25 (51)
- KYS30 (88)
- PB100 (29)
- PB250 (2)
- PN120 (1)
- SP4019 (37)
- THM (130)
- THM-X (74)
- THMF-X (61)
- TN10P (138)
- TN10U (117)
- TN15M (114)
- TN15U (92)
- TN2000 (120)
- TN20K (146)
- TN20P (171)
- TN30M (125)
- TN30P (108)
- TN4000 (115)
- TN6010 (86)
- TN6025 (59)
- TTM09 (3)
- TTR (9)
- TTS (50)
- W00160 (5)
- W00162 (7)
- WBH10P (66)
- WBH10U (40)
- WBH20P (133)
- WBH30P (93)
- WBK40U (20)
- WBK45U (22)
- WDN00U (71)
- WDN25U (110)
- WK05CT (154)
- WK15CT (118)
- WK20CT (204)
- WM15CT (169)
- WM25CT (183)
- WM35CT (127)
- WP05CT (45)
- WP15CT (197)
- WP20TT (6)
- WP25CT (206)
- WP35CT (148)
- WS10PT (163)
- WS25PT (162)
- WU05PT (13)
- WU10HT (172)
- WU10PT (144)
- WU25PT (139)
- X00580 (31)
- X00581 (31)
- X00582 (31)
- X00583 (31)
- X00584 (31)
- X00585 (31)
- X00586 (31)
- X00591 (31)
- X00592 (31)
- X00593 (31)
- X00594 (31)
- X00596 (31)
- X00597 (31)
- X00599 (31)
Hand Of Tool
Hand Of Tool
- L (94)
- N (11)
- R (103)
Wiper Insert
Wiper Insert
- N (304)
- Y (140)
F Dimension
F Dimension
- 0.0 mm(11)
- 4.0 mm(1)
- 5.0 mm(1)
- 7.0 mm(8)
- 9.0 mm(10)
- 11.0 mm(17)
- 13.0 mm(16)
- 17.0 mm(42)
- 22.0 mm(20)
- 24.0 mm(11)
- 27.0 mm(71)
to
F Dimension
F Dimension
- 0.0 in(11)
- 0.1575 in(1)
- 0.1969 in(1)
- 0.2756 in(7)
- 0.276 in(1)
- 0.3543 in(10)
- 0.4331 in(17)
- 0.5118 in(14)
- 0.512 in(2)
- 0.669 in(2)
- 0.6693 in(40)
- 0.8661 in(20)
- 0.9449 in(10)
- 0.945 in(1)
- 1.063 in(71)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(6)
- 13.0 mm(8)
- 16.0 mm(10)
- 18.5 mm(2)
- 20.0 mm(15)
- 25.0 mm(16)
- 32.0 mm(38)
- 34.0 mm(4)
- 40.0 mm(20)
- 41.3 mm(2)
- 47.6 mm(2)
- 50.0 mm(34)
- 54.0 mm(48)
- 56.625 mm(2)
- 57.2 mm(2)
- 60.0 mm(2)
- 74.0 mm(2)
- 80.0 mm(3)
- 86.0 mm(8)
- 88.9 mm(4)
- 94.0 mm(2)
- 100.0 mm(2)
- 120.0 mm(2)
- 139.7 mm(2)
- 174.6 mm(2)
- 209.6 mm(2)
- 222.3 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(6)
- 0.5118 in(7)
- 0.512 in(1)
- 0.6299 in(10)
- 0.7283 in(2)
- 0.7874 in(15)
- 0.984 in(1)
- 0.9843 in(15)
- 1.2598 in(36)
- 1.26 in(2)
- 1.3386 in(4)
- 1.5748 in(20)
- 1.626 in(2)
- 1.874 in(2)
- 1.969 in(34)
- 2.126 in(48)
- 2.229 in(2)
- 2.252 in(2)
- 2.362 in(2)
- 2.913 in(2)
- 3.15 in(3)
- 3.386 in(8)
- 3.5 in(4)
- 3.701 in(2)
- 3.937 in(2)
- 4.724 in(2)
- 5.5 in(2)
- 6.874 in(2)
- 8.252 in(2)
- 8.752 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(34)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(34)
to
Cutting Direction
Cutting Direction
- B (53)
- E (52)
- S (103)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (101)
- NEGATIVE-ZERO (20)
- NEUTRAL (ZERO) (75)
- POSITIVE-ZERO (12)
Maximum Bore Depth
Maximum Bore Depth
- 1.3842 in(2)
- 1.3843 in(3)
- 1.43 in(1)
- 1.575 in(82)
- 1.6535 in(1)
- 1.6547 in(2)
- 1.6618 in(7)
- 1.772 in(19)
- 1.9685 in(2)
- 1.969 in(2)
- 2.1689 in(15)
- 2.209 in(3)
- 2.2091 in(6)
- 2.3622 in(2)
- 2.7567 in(10)
- 2.757 in(2)
- 2.954 in(1)
- 2.9543 in(16)
- 2.9929 in(8)
- 3.0445 in(8)
- 3.1496 in(4)
- 3.15 in(2)
- 3.151 in(2)
- 3.7803 in(12)
- 3.937 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.16 mm(5)
- 36.33 mm(1)
- 40.0 mm(82)
- 42.0 mm(1)
- 42.03 mm(2)
- 42.21 mm(7)
- 45.0 mm(19)
- 50.0 mm(4)
- 55.09 mm(15)
- 56.11 mm(9)
- 60.0 mm(2)
- 70.02 mm(12)
- 75.04 mm(17)
- 76.02 mm(8)
- 77.33 mm(8)
- 80.0 mm(6)
- 80.04 mm(2)
- 96.02 mm(12)
- 100.0 mm(4)
to
Boring Bar Material
Boring Bar Material
- C (7)
- S (111)
Front-End
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (16)
- CARTRIDGE MOUNT (2)
- COMBI SHELL ADAPTER (2)
- CUTOFF SUPPORT BLADE (2)
- DRILL CHUCK ADAPTER (1)
- END MILL ADAPTER (10)
- ER COLLET CHUCK (3)
- EXTENSION (2)
- HYDRAULIC CHUCK (5)
- KM MODULAR ADAPTER (1)
- REDUCER (1)
- SHELL MILL ADAPTER (8)
- TAP CHUCK ADAPTER (2)
- WHISTLE NOTCH ADAPTER (8)
Clamp Style
Clamp Style
- D (33)
- M (71)
- N (47)
- P (54)
- S (99)
- W (2)
Cutting Width
Cutting Width
- 0.0197 in(16)
- 0.031 in(16)
- 0.0315 in(16)
- 0.035 in(8)
- 0.039 in(16)
- 0.0394 in(30)
- 0.041 in(16)
- 0.047 in(30)
- 0.0472 in(30)
- 0.055 in(16)
- 0.0551 in(16)
- 0.058 in(16)
- 0.0591 in(30)
- 0.062 in(30)
- 0.0669 in(16)
- 0.067 in(16)
- 0.0689 in(30)
- 0.072 in(14)
- 0.076 in(8)
- 0.0768 in(16)
- 0.077 in(8)
- 0.078 in(14)
- 0.0787 in(30)
- 0.079 in(23)
- 0.0866 in(30)
- 0.088 in(30)
- 0.0886 in(23)
- 0.094 in(30)
- 0.097 in(14)
- 0.0984 in(30)
- 0.105 in(14)
- 0.108 in(16)
- 0.1083 in(30)
- 0.11 in(14)
- 0.118 in(22)
- 0.1181 in(34)
- 0.122 in(14)
- 0.125 in(34)
- 0.126 in(22)
- 0.1278 in(16)
- 0.128 in(14)
- 0.129 in(8)
- 0.131 in(7)
- 0.1378 in(34)
- 0.142 in(14)
- 0.147 in(8)
- 0.15 in(8)
- 0.151 in(16)
- 0.156 in(14)
- 0.157 in(14)
- 0.1574 in(16)
- 0.1575 in(18)
- 0.167 in(4)
- 0.1673 in(14)
- 0.1771 in(18)
- 0.1772 in(18)
- 0.178 in(14)
- 0.185 in(14)
- 0.188 in(18)
- 0.189 in(18)
- 0.192 in(7)
- 0.195 in(14)
- 0.196 in(14)
- 0.1969 in(4)
- 0.197 in(2)
- 0.213 in(4)
- 0.2165 in(2)
- 0.2166 in(2)
- 0.2362 in(4)
- 0.25 in(4)
- 0.256 in(4)
to
Cutting Width
Cutting Width
- 0.5 mm(16)
- 0.787 mm(16)
- 0.8 mm(16)
- 0.889 mm(8)
- 0.991 mm(16)
- 1.0 mm(30)
- 1.041 mm(16)
- 1.19 mm(23)
- 1.194 mm(30)
- 1.2 mm(30)
- 1.39 mm(16)
- 1.397 mm(8)
- 1.4 mm(16)
- 1.473 mm(16)
- 1.5 mm(30)
- 1.57 mm(22)
- 1.575 mm(30)
- 1.69 mm(8)
- 1.7 mm(16)
- 1.702 mm(16)
- 1.75 mm(30)
- 1.829 mm(14)
- 1.94 mm(8)
- 1.95 mm(16)
- 1.956 mm(8)
- 1.981 mm(14)
- 2.0 mm(30)
- 2.007 mm(16)
- 2.2 mm(30)
- 2.235 mm(22)
- 2.236 mm(7)
- 2.24 mm(16)
- 2.25 mm(23)
- 2.387 mm(7)
- 2.388 mm(30)
- 2.39 mm(7)
- 2.464 mm(14)
- 2.5 mm(30)
- 2.667 mm(14)
- 2.74 mm(8)
- 2.743 mm(8)
- 2.75 mm(30)
- 2.794 mm(14)
- 2.997 mm(22)
- 3.0 mm(34)
- 3.099 mm(14)
- 3.17 mm(14)
- 3.175 mm(34)
- 3.18 mm(10)
- 3.2 mm(22)
- 3.245 mm(16)
- 3.25 mm(14)
- 3.251 mm(7)
- 3.27 mm(8)
- 3.32 mm(7)
- 3.5 mm(34)
- 3.607 mm(14)
- 3.73 mm(8)
- 3.81 mm(8)
- 3.82 mm(8)
- 3.835 mm(8)
- 3.84 mm(16)
- 3.96 mm(14)
- 3.962 mm(14)
- 3.974 mm(7)
- 3.988 mm(14)
- 4.0 mm(18)
- 4.242 mm(4)
- 4.25 mm(14)
- 4.5 mm(18)
- 4.521 mm(14)
- 4.699 mm(14)
- 4.775 mm(18)
- 4.78 mm(2)
- 4.785 mm(2)
- 4.788 mm(2)
- 4.8 mm(14)
- 4.801 mm(18)
- 4.88 mm(7)
- 4.95 mm(14)
- 4.953 mm(7)
- 4.978 mm(14)
- 5.0 mm(4)
- 5.004 mm(2)
- 5.41 mm(4)
- 5.5 mm(4)
- 6.0 mm(4)
- 6.35 mm(4)
- 6.36 mm(2)
- 6.502 mm(4)
to
Front End Type
Front End Type
- FDA - Milling Cutter Arbor (10)
- KMT - KM Adapter (3)
- MCS - Modular Cartridge System (2)
- PMK - Prismatic Adapter Kenna (2)
- SWB - Tap Chuck Adapter (2)
- SZK - Collet Taper (3)
- ZYL - Cylindrical Adapter (41)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (55)
- D-DIAMOND/RHOMBIC 55 (78)
- LT-TRIANGLE LAY DOWN THREAD 60 (23)
- R-ROUND (7)
- S-SQUARE 90 (25)
- T-TRIANGLE 60 (40)
- TN-TOP NOTCH (34)
- V-DIAMOND/RHOMBIC 35 (24)
- W-TRIGON 80 (20)
Front End Style
Front End Style
- FDA12 Transv Drive&CutRetScr (1)
- FDA22 Transv Drive & SHCS (7)
- FDA23 Longit&Transv Drv&SHCS (2)
- KMT00 All KM, except 02,05,09 (3)
- MCS01 Modular Deep Grooving (2)
- PMK02 Cutoff Sup Bld A1-A3 (2)
- SWB-01 WFL#...WES#(Bilz) (2)
- SZK02 Collets 8 Degree Taper (3)
- ZYL01 Straight Shank (7)
- ZYL10 Weldon Shank (10)
- ZYL13 2Deg-Whistle Notch (8)
- ZYL22 Boring Bar Shank (16)
Insert Size
Insert Size
- 2 (16)
- 3 (14)
- 4 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.138 in(12)
- 0.21 in(8)
- 0.294 in(2)
- 0.6299 in(1)
- 0.7874 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 3.51 mm(12)
- 5.33 mm(8)
- 7.47 mm(2)
- 16.0 mm(1)
- 20.0 mm(1)
to
Gage Length
Gage Length
- 1.0240 in(4)
- 1.1020 in(1)
- 1.2600 in(3)
- 1.4170 in(1)
- 1.4960 in(2)
- 1.5748 in(1)
- 1.7717 in(1)
- 1.7720 in(2)
- 1.7736 in(1)
- 1.9685 in(1)
- 1.9690 in(3)
- 1.9800 in(2)
- 2.1060 in(2)
- 2.1650 in(2)
- 2.3620 in(5)
- 2.3622 in(1)
- 2.5590 in(5)
- 2.5591 in(3)
- 2.7559 in(1)
- 2.7560 in(4)
- 2.7579 in(1)
- 2.9528 in(1)
- 2.9530 in(4)
- 3.0000 in(1)
- 3.1500 in(5)
- 3.3460 in(2)
- 3.5430 in(2)
- 3.7400 in(1)
- 3.9330 in(1)
Gage Length
Gage Length
- 26.0000 mm(4)
- 28.0000 mm(1)
- 32.0000 mm(3)
- 36.0000 mm(1)
- 38.0000 mm(2)
- 40.0000 mm(1)
- 45.0000 mm(3)
- 45.0500 mm(1)
- 50.0000 mm(4)
- 50.3000 mm(2)
- 53.5000 mm(2)
- 55.0000 mm(2)
- 60.0000 mm(6)
- 65.0000 mm(8)
- 70.0000 mm(5)
- 70.0500 mm(1)
- 75.0000 mm(5)
- 76.2000 mm(1)
- 80.0000 mm(5)
- 85.0000 mm(2)
- 90.0000 mm(2)
- 95.0000 mm(1)
- 99.9000 mm(1)
Front End Size
Front End Size
- 0.039 in(1)
- 0.236 in(2)
- 0.2362 in(2)
- 0.315 in(4)
- 0.375 in(2)
- 0.3937 in(2)
- 0.394 in(2)
- 0.472 in(1)
- 0.4724 in(2)
- 0.473 in(1)
- 0.5 in(4)
- 0.551 in(1)
- 0.625 in(2)
- 0.6299 in(1)
- 0.63 in(4)
- 0.709 in(1)
- 0.7491 in(1)
- 0.75 in(5)
- 0.787 in(1)
- 0.7874 in(1)
- 0.788 in(1)
- 0.8661 in(1)
- 0.87 in(1)
- 0.9843 in(1)
- 1.0 in(3)
- 1.063 in(1)
- 1.2215 in(1)
- 1.25 in(1)
- 1.2598 in(1)
- 1.26 in(1)
- 1.5 in(1)
- 1.5748 in(2)
- 1.575 in(1)
to
Front End Size
Front End Size
- 1.0 mm(1)
- 6.0 mm(4)
- 8.0 mm(4)
- 9.525 mm(2)
- 10.0 mm(4)
- 12.0 mm(4)
- 12.7 mm(4)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(5)
- 18.0 mm(1)
- 19.027 mm(1)
- 19.05 mm(5)
- 20.0 mm(3)
- 22.0 mm(2)
- 25.0 mm(1)
- 25.4 mm(3)
- 27.0 mm(1)
- 31.027 mm(1)
- 31.75 mm(1)
- 32.0 mm(2)
- 38.1 mm(1)
- 40.0 mm(3)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (175)
- B L (189)
- C A (148)
- C N (135)
- D P (193)
- H T (246)
- H W (304)
Back-End
Connection Type
Connection Type
- TAPER SHANK (208)
System Size
System Size
- KM40TS (271)
Back-End Diameter
Back-End Diameter
- 40.0 mm(369)
to
Back-End Diameter
Back-End Diameter
- 1.5748 in(63)
to
Shank Height
Shank Height
- 0.0 in(4)
to
Shank Height
Shank Height
- 0.0 mm(4)
to
No filters matching ""
