Kenlever™ • P-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (271)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(271)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(271)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(271)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(271)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(271)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(271)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(271)
- M Stainless Steel (266)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(266)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(266)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(266)
- K Cast Iron (271)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(271)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(271)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(271)
- N Non-Ferrous Materials (240)
- N1Wrought Aluminum (240)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(240)
- N3High-Silicon Aluminum Alloys Si >12.2%(60)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (240)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (201)
- N6Carbon, Graphite Composites, CFRP (200)
- N7MMC's (201)
- S High-Temp Alloys (262)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(262)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(262)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(262)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(258)
- H Hardened Materials (182)
- H1Hardened Materials 44-48 HRC(182)
- H2Hardened Materials 48-55 HRC(182)
- H3Hardened Materials 56-60 HRC(182)
- H4Hardened Materials >60 HRC(146)
Applications
Applications
Facing (232)
Multiple Direction Cutting (180)
Profiling (101)
TRN Boring (99)
Turning (271)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (266)
- Lightly Interrupted Cut (271)
- Smooth Cut (271)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (41)
- 63.0 (13)
- 75.0 (73)
- 90.0 (18)
- 93.0 (51)
- 95.0 (67)
- 107.5 (8)
to
Connection Style
Connection Style
- KM (50)
- Toolholder (122)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (91)
- 2.0 (147)
- 3.0 (28)
- 4.0 (223)
- 6.0 (38)
- 8.0 (159)
to
Over All Length [L]
Over All Length [L]
- 35.0 mm(9)
- 40.0 mm(33)
- 45.0 mm(2)
- 50.0 mm(32)
- 60.0 mm(57)
- 70.0 mm(14)
- 80.0 mm(2)
- 100.0 mm(9)
- 124.99 mm(2)
- 125.0 mm(22)
- 149.99 mm(1)
- 150.0 mm(34)
- 169.99 mm(2)
- 170.0 mm(37)
- 170.03 mm(2)
- 200.0 mm(2)
- 250.0 mm(11)
to
Corner Radius
Corner Radius
- 0.1 mm(87)
- 0.2 mm(89)
- 0.35 mm(39)
- 0.4 mm(201)
- 0.6 mm(12)
- 0.8 mm(260)
- 1.2 mm(260)
- 1.6 mm(219)
- 2.375 mm(22)
- 2.4 mm(71)
- 3.175 mm(3)
- 3.2 mm(8)
- 4.0 mm(20)
- 10.0 mm(1)
- 12.5 mm(3)
- 16.0 mm(2)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (79)
- CW5025 (64)
- K060 (36)
- K090 (55)
- K1 (20)
- K313 (201)
- K68 (188)
- KB1340 (100)
- KB1345 (48)
- KB1610 (95)
- KB1630 (48)
- KB5610 (36)
- KB5630 (36)
- KBH10 (134)
- KBH10B (134)
- KBH20 (134)
- KBH20B (134)
- KC5010 (260)
- KC5025 (238)
- KC5410 (164)
- KC730 (140)
- KC850 (222)
- KC9125 (16)
- KCK05 (198)
- KCK05B (95)
- KCK15 (237)
- KCK15B (240)
- KCK20 (246)
- KCK20B (219)
- KCM15 (236)
- KCM15B (236)
- KCM25 (244)
- KCM25B (257)
- KCM35 (218)
- KCM35B (166)
- KCP05 (163)
- KCP05B (176)
- KCP10 (266)
- KCP10B (264)
- KCP25 (234)
- KCP25B (266)
- KCP25C (271)
- KCP30 (247)
- KCP30B (190)
- KCP40 (222)
- KCP40B (222)
- KCPK05 (244)
- KCS10 (37)
- KCS10B (244)
- KCU10 (260)
- KCU10B (261)
- KCU25 (257)
- KCU25B (257)
- KD1400 (48)
- KD1405 (36)
- KD1425 (60)
- KS15 (36)
- KT315 (176)
- KT325 (36)
- KTP10 (176)
- KTP25S (99)
- KY1540 (36)
- KY1615 (4)
- KY3500 (214)
- KY4300 (78)
- KY4400 (157)
- KYHK15B (179)
- KYK10 (83)
- KYK25 (143)
- KYS25 (71)
- KYS30 (83)
- PB100 (17)
- SP4019 (36)
- THM (59)
- THM-X (62)
- THMF-X (42)
- TN10P (89)
- TN10U (54)
- TN15M (56)
- TN15U (42)
- TN2000 (96)
- TN20K (100)
- TN20P (131)
- TN30M (68)
- TN30P (104)
- TN4000 (97)
- TN6010 (42)
- TTR (1)
- TTR-X (9)
- TTS (51)
- WBH10P (17)
- WBH10U (17)
- WBH20P (73)
- WBH30P (17)
- WBK40U (19)
- WDN00U (17)
- WDN25U (29)
- WK05CT (139)
- WK15CT (90)
- WK20CT (141)
- WM15CT (128)
- WM25CT (141)
- WM35CT (140)
- WP05CT (23)
- WP15CT (143)
- WP25CT (143)
- WP35CT (114)
- WS10PT (128)
- WS25PT (140)
- WU10HT (131)
- WU10PT (101)
- WU25PT (101)
- X00580 (36)
- X00581 (36)
- X00582 (36)
- X00583 (36)
- X00584 (36)
- X00585 (36)
- X00586 (36)
- X00591 (36)
- X00592 (36)
- X00593 (36)
- X00594 (36)
- X00596 (36)
- X00597 (36)
- X00599 (36)
Hand Of Tool
Hand Of Tool
- L (75)
- N (16)
- R (81)
Wiper Insert
Wiper Insert
- N (271)
- Y (121)
F Dimension
F Dimension
- 0.0 mm(16)
- 8.0 mm(1)
- 10.0 mm(4)
- 12.5 mm(6)
- 16.0 mm(1)
- 17.0 mm(2)
- 17.25 mm(1)
- 20.0 mm(9)
- 22.0 mm(8)
- 24.0 mm(2)
- 25.0 mm(18)
- 27.0 mm(16)
- 30.0 mm(4)
- 32.0 mm(41)
- 35.0 mm(9)
- 35.25 mm(1)
- 40.0 mm(15)
- 43.0 mm(7)
- 48.0 mm(1)
- 50.0 mm(4)
- 53.0 mm(4)
- 59.0 mm(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 118.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 40.0 mm(4)
- 44.0 mm(3)
- 50.0 mm(18)
- 60.0 mm(2)
- 63.0 mm(16)
- 74.0 mm(4)
- 80.0 mm(34)
- 90.0 mm(2)
- 94.0 mm(2)
- 100.0 mm(10)
- 104.0 mm(2)
- 118.0 mm(2)
to
Cutting Direction
Cutting Direction
- B (32)
- E (16)
- P (2)
- S (122)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (113)
- NEGATIVE-ZERO (28)
- NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(9)
- 40.0 mm(25)
- 50.0 mm(20)
- 60.0 mm(38)
- 70.0 mm(7)
to
Boring Bar Material
Boring Bar Material
- S (2)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (79)
- D-DIAMOND/RHOMBIC 55 (70)
- R-ROUND (6)
- S-SQUARE 90 (78)
- T-TRIANGLE 60 (16)
- W-TRIGON 80 (22)
Maximum Cutting Depth
Maximum Cutting Depth
- 40.15 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (124)
- B L (134)
- C A (201)
- C N (214)
- D P (99)
- H T (176)
- H W (271)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (122)
- TAPER SHANK (50)
System Size
System Size
- KM40TS (8)
- KM50TS (12)
- KM63TS (21)
- KM80TS (9)
Back-End Diameter
Back-End Diameter
- 32.0 mm(9)
- 40.0 mm(35)
- 50.0 mm(32)
- 63.0 mm(57)
- 80.0 mm(16)
to
Shank Height
Shank Height
- 16.0 mm(9)
- 20.0 mm(24)
- 25.0 mm(35)
- 32.0 mm(41)
- 40.0 mm(13)
to
Shank Width
Shank Width
- 16.0 mm(9)
- 20.0 mm(24)
- 25.0 mm(54)
- 32.0 mm(24)
- 40.0 mm(11)
to
No filters matching ""
