Ferramenta de troca rápida KM™: Flexibilidade sem modificações dispendiosas!

A Ferramenta de Troca Rápida KM™ é a primeira opção para operações estáticas (torno) e rotativas.
O KM™ é a solução perfeita quando você deseja melhorar a produtividade do seu equipamento atual sem investimentos e modificações dispendiosos. O KM™ é um produto ISO padrão da indústria que fornece estabilidade, confiabilidade e flexibilidade em suas operações.

  • Seja mais eficiente e maximize sua MRR
  • Mantenha seu processo de produção flexível e estável
  • Mantenha suas máquinas funcionando com a menor quantidade de tempo de inatividade para retirar as peças da porta
Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1353)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1349)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1349)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1349)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1349)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1349)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1353)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1353)
  • M Stainless Steel (1338)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (1338)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1338)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (1338)
  • K Cast Iron (1378)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1378)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1378)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1378)
  • N Non-Ferrous Materials (1318)
    • N1
      Wrought Aluminum (1315)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1314)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (977)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1318)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1314)
    • N6
      Carbon, Graphite Composites, CFRP (1310)
    • N7
      MMC's (1149)
  • S High-Temp Alloys (1358)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1356)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1358)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1356)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1335)
  • H Hardened Materials (1211)
    • H1
      Hardened Materials 44-48 HRC (1211)
    • H2
      Hardened Materials 48-55 HRC (1206)
    • H3
      Hardened Materials 56-60 HRC (1032)
    • H4
      Hardened Materials >60 HRC (967)
  • C CFRP Materials (1068)
    • C1
      CFRP, CFRP / CFRP (1064)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (949)
Applications
Applications
  • Chamfer Turning Chamfer Turning (44)
  • Convex Drilling Convex Drilling (7)
  • Cut-Off Cut-Off (41)
  • Deep Grooving Deep Grooving (41)
  • Drilling Drilling (7)
  • Face Grooving Face Grooving (41)
  • Facing Facing (752)
  • Grooving Grooving (163)
  • ID Facing ID Facing (6)
  • ID Grooving ID Grooving (74)
  • ID Thread Turning ID Thread Turning (128)
  • Inclined Entry Drilling Inclined Entry Drilling (7)
  • Inclined Exit Drilling Inclined Exit Drilling (7)
  • Multiple Direction Cutting Multiple Direction Cutting (899)
  • OD Thread Turning OD Thread Turning (158)
  • Plunge Turning Plunge Turning (50)
  • Profiling Profiling (746)
  • TRN Boring TRN Boring (712)
  • Threading Threading (179)
  • Turning Turning (994)
  • X-Offset Drilling X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.687 in (1)
  • 0.75 in (1)
  • 0.814 in (1)
  • 0.875 in (1)
  • 0.937 in (1)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.125 in (1)
  • 1.143 in (1)
  • 1.22 in (1)
  • 1.25 in (1)
  • 1.375 in (1)
  • 1.5 in (1)
  • 1.625 in (1)
  • 1.75 in (1)
  • 1.875 in (1)
  • 2.0 in (1)
Cutting Diameter Min a Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 17.45 mm (1)
  • 19.05 mm (1)
  • 20.651 mm (1)
  • 22.225 mm (1)
  • 23.8 mm (1)
  • 25.401 mm (1)
  • 27.0 mm (1)
  • 28.576 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (1)
  • 34.926 mm (1)
  • 38.1 mm (1)
  • 41.276 mm (1)
  • 44.45 mm (1)
  • 47.625 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min a Cutting Diameter Max
Type of Thread
Type of Thread
  • 55 (71)
  • 60 (196)
  • ACME (148)
  • API (99)
  • API BUTTRESS (16)
  • API RD (106)
  • BSPT (55)
  • BSW (125)
  • BUTTRESS (125)
  • M (147)
  • NPT (109)
  • NPTF (55)
  • RD DIN 405 (66)
  • STUB ACME (120)
  • TR DIN 103 (66)
  • UN (180)
  • UNJ (109)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1260)
  • Lightly Interrupted Cut (1281)
  • Smooth Cut (1282)
  • Varying Depth of Cut (1280)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 47.625 mm (1)
  • 52.401 mm (1)
  • 57.151 mm (1)
  • 61.901 mm (1)
  • 66.675 mm (1)
  • 71.45 mm (1)
  • 76.2 mm (1)
  • 81.0 mm (1)
  • 85.726 mm (1)
  • 87.0 mm (1)
  • 93.0 mm (1)
  • 95.25 mm (1)
  • 104.775 mm (1)
  • 114.301 mm (1)
  • 123.825 mm (1)
  • 133.35 mm (1)
  • 142.875 mm (1)
  • 152.4 mm (1)
Maximum Hole Depth [L4] Min a Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.875 in (1)
  • 2.063 in (1)
  • 2.25 in (1)
  • 2.437 in (1)
  • 2.625 in (1)
  • 2.813 in (1)
  • 3.0 in (1)
  • 3.189 in (1)
  • 3.375 in (1)
  • 3.426 in (1)
  • 3.661 in (1)
  • 3.75 in (1)
  • 4.125 in (1)
  • 4.5 in (1)
  • 4.875 in (1)
  • 5.25 in (1)
  • 5.625 in (1)
  • 6.0 in (1)
Maximum Hole Depth [L4] Min a Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.52 in (1)
  • 2.835 in (1)
  • 2.992 in (1)
  • 3.189 in (1)
  • 3.386 in (1)
  • 3.543 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 4.055 in (1)
  • 4.213 in (1)
  • 4.331 in (1)
  • 4.606 in (1)
  • 5.079 in (1)
  • 5.472 in (1)
  • 6.22 in (1)
  • 6.575 in (1)
  • 7.165 in (1)
  • 7.521 in (1)
Reach Min a Reach Max
Reach
Reach
  • 64.0 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 81.0 mm (1)
  • 86.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 103.0 mm (1)
  • 107.0 mm (1)
  • 110.0 mm (1)
  • 117.0 mm (1)
  • 129.0 mm (1)
  • 139.0 mm (1)
  • 158.0 mm (1)
  • 167.0 mm (1)
  • 182.0 mm (1)
  • 191.0 mm (1)
Reach Min a Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (65)
  • 48.0 (14)
  • 49.783 (3)
  • 50.0 (3)
  • 61.0 (2)
  • 62.5 (20)
  • 63.0 (8)
  • 72.5 (3)
  • 75.0 (143)
  • 85.0 (4)
  • 90.0 (359)
  • 93.0 (354)
  • 95.0 (338)
  • 107.5 (82)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (973)
Number of Flutes
Number of Flutes
  • 2 (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (29)
  • 1.0 (875)
  • 2.0 (912)
  • 3.0 (263)
  • 4.0 (757)
  • 6.0 (130)
  • 8.0 (429)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.046 in (1)
  • 0.591 in (7)
  • 0.787 in (88)
  • 0.797 in (1)
  • 0.984 in (35)
  • 0.992 in (2)
  • 1.181 in (143)
  • 1.379 in (50)
  • 1.575 in (137)
  • 1.772 in (40)
  • 1.811 in (6)
  • 1.85 in (8)
  • 1.969 in (194)
  • 2.165 in (1)
  • 2.283 in (3)
  • 2.362 in (252)
  • 2.757 in (162)
  • 2.926 in (2)
  • 3.122 in (1)
  • 3.15 in (32)
  • 3.426 in (2)
  • 3.516 in (1)
  • 3.543 in (51)
  • 3.622 in (2)
  • 3.819 in (2)
  • 3.938 in (39)
  • 4.0 in (5)
  • 4.331 in (45)
  • 4.392 in (4)
  • 4.425 in (4)
  • 4.488 in (4)
  • 4.529 in (17)
  • 4.724 in (1)
  • 4.819 in (2)
  • 4.906 in (1)
  • 4.921 in (29)
  • 5.0 in (4)
  • 5.094 in (1)
  • 5.118 in (1)
  • 5.281 in (1)
  • 5.307 in (2)
  • 5.469 in (1)
  • 5.513 in (56)
  • 5.656 in (1)
  • 5.844 in (1)
  • 5.906 in (3)
  • 5.944 in (1)
  • 6.0 in (3)
  • 6.008 in (1)
  • 6.219 in (1)
  • 6.494 in (1)
  • 6.508 in (1)
  • 6.694 in (9)
  • 6.883 in (1)
  • 7.37 in (1)
  • 7.758 in (1)
  • 8.496 in (1)
  • 8.871 in (1)
  • 9.443 in (1)
  • 9.818 in (1)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.175 mm (1)
  • 15.0 mm (7)
  • 20.0 mm (88)
  • 20.25 mm (1)
  • 25.0 mm (35)
  • 25.201 mm (2)
  • 30.0 mm (143)
  • 35.0 mm (50)
  • 40.0 mm (137)
  • 45.0 mm (40)
  • 46.0 mm (6)
  • 47.0 mm (8)
  • 50.0 mm (194)
  • 55.0 mm (1)
  • 58.0 mm (3)
  • 60.0 mm (252)
  • 70.0 mm (162)
  • 74.3 mm (2)
  • 79.301 mm (1)
  • 80.0 mm (32)
  • 87.0 mm (2)
  • 89.301 mm (1)
  • 90.0 mm (51)
  • 92.0 mm (2)
  • 97.0 mm (2)
  • 100.0 mm (39)
  • 101.601 mm (5)
  • 110.0 mm (45)
  • 111.551 mm (4)
  • 112.4 mm (4)
  • 114.0 mm (4)
  • 115.0 mm (17)
  • 120.0 mm (1)
  • 122.4 mm (2)
  • 124.625 mm (1)
  • 125.0 mm (29)
  • 127.0 mm (4)
  • 129.4 mm (1)
  • 130.0 mm (1)
  • 134.15 mm (1)
  • 134.8 mm (2)
  • 138.925 mm (1)
  • 140.0 mm (56)
  • 143.675 mm (1)
  • 148.425 mm (1)
  • 150.0 mm (3)
  • 150.951 mm (1)
  • 152.4 mm (3)
  • 152.6 mm (1)
  • 157.951 mm (1)
  • 164.951 mm (1)
  • 165.3 mm (1)
  • 170.0 mm (9)
  • 174.826 mm (1)
  • 187.201 mm (1)
  • 197.05 mm (1)
  • 215.8 mm (1)
  • 225.326 mm (1)
  • 239.851 mm (1)
  • 249.375 mm (1)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (35)
  • 0.001 in (88)
  • 0.002 in (227)
  • 0.003 in (175)
  • 0.004 in (846)
  • 0.005 in (71)
  • 0.006 in (123)
  • 0.007 in (121)
  • 0.008 in (887)
  • 0.01 in (118)
  • 0.011 in (79)
  • 0.012 in (77)
  • 0.014 in (204)
  • 0.015 in (19)
  • 0.016 in (1042)
  • 0.017 in (16)
  • 0.019 in (80)
  • 0.02 in (106)
  • 0.021 in (7)
  • 0.023 in (83)
  • 0.024 in (58)
  • 0.027 in (3)
  • 0.028 in (14)
  • 0.03 in (58)
  • 0.031 in (1177)
  • 0.033 in (5)
  • 0.034 in (4)
  • 0.035 in (80)
  • 0.037 in (19)
  • 0.038 in (3)
  • 0.039 in (115)
  • -0.039 in (29)
  • 0.041 in (8)
  • 0.047 in (1082)
  • 0.049 in (99)
  • 0.055 in (5)
  • 0.06 in (112)
  • 0.062 in (195)
  • 0.063 in (901)
  • 0.069 in (99)
  • 0.078 in (54)
  • 0.079 in (84)
  • 0.08 in (4)
  • 0.089 in (80)
  • 0.094 in (179)
  • 0.095 in (352)
  • 0.098 in (28)
  • 0.099 in (2)
  • 0.125 in (55)
  • 0.126 in (117)
  • 0.157 in (29)
  • 0.188 in (2)
  • 0.197 in (3)
  • 0.237 in (4)
  • 0.25 in (11)
  • 0.315 in (1)
  • 0.394 in (3)
  • 0.492 in (5)
  • 0.63 in (4)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (35)
  • 0.025 mm (88)
  • 0.05 mm (227)
  • 0.076 mm (175)
  • 0.1 mm (846)
  • 0.125 mm (71)
  • 0.151 mm (123)
  • 0.176 mm (121)
  • 0.2 mm (887)
  • 0.225 mm (70)
  • 0.25 mm (115)
  • 0.275 mm (79)
  • 0.301 mm (77)
  • 0.325 mm (96)
  • 0.351 mm (188)
  • 0.375 mm (19)
  • 0.4 mm (1042)
  • 0.426 mm (16)
  • 0.45 mm (80)
  • 0.476 mm (26)
  • 0.5 mm (106)
  • 0.525 mm (7)
  • 0.576 mm (83)
  • 0.601 mm (58)
  • 0.65 mm (3)
  • 0.701 mm (14)
  • 0.75 mm (58)
  • 0.775 mm (99)
  • 0.8 mm (1078)
  • 0.826 mm (5)
  • 0.851 mm (4)
  • 0.9 mm (80)
  • 0.925 mm (19)
  • 0.976 mm (3)
  • 1.0 mm (115)
  • -1.0 mm (29)
  • 1.05 mm (8)
  • 1.201 mm (1082)
  • 1.25 mm (99)
  • 1.401 mm (5)
  • 1.5 mm (108)
  • 1.526 mm (13)
  • 1.576 mm (195)
  • 1.6 mm (901)
  • 1.75 mm (99)
  • 1.975 mm (54)
  • 2.0 mm (84)
  • 2.025 mm (4)
  • 2.25 mm (80)
  • 2.375 mm (179)
  • 2.401 mm (352)
  • 2.5 mm (28)
  • 2.526 mm (2)
  • 3.176 mm (55)
  • 3.2 mm (117)
  • 4.0 mm (29)
  • 4.775 mm (2)
  • 5.0 mm (3)
  • 6.0 mm (4)
  • 6.351 mm (11)
  • 8.0 mm (1)
  • 10.0 mm (3)
  • 12.5 mm (5)