Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Highly Flexible Modular Boring System

One system includes highly flexible roughing and fine-boring heads to large bridge tooling with optimum amount of tooling components. 

This premium boring line enables roughing to fine-boring operations using one system with a large diameter range from 9,75–2,205mm (.384–86.8"). The ModBORE system can be used in most workpiece materials in metalcutting applications along with the latest Kennametal standard ISO turning inserts. 

Based on KM™, HSK, and inch SSF couplings, match all spindle specifications direct or indirect via adaptors. The ModBORE fine-boring system uses standard ISO/ANSI turning inserts for maximum performance and flexibility.

RBHT • Twin Cutters for Rough and Semi-Finish Boring 

  • Diameters 23,5–153mm (.925–6.024").
  • KM, HSK, and inch straight shank back end versions available.
  • Preloaded serration and ground support face for stable connection, minimal vibration, and maximum accuracy, with easy diameter adjustment.
  • Large selection of blades sets:
    -Staggered - efficient machining of large depths of cut.
    -70° - for challenging applications requiring stable corner radii and full use of inserts.
    -90° - most precise machining results.
  • Generous clearance and through coolant enable free chip flow and improved tool life.
  • All toolholders accept positive standard inserts. Toolholders in diameter 65,5mm (2.58") and greater for negative standard inserts.

FBHM • Offset Boring Bar and Cartridge Heads for Fine Finishing 

  • Diameters 9,75–320mm (.384–12.59"). 
  • KM-TS™, HSK, CV, DV, and BT steep taper back end styles available.
  • Precision-ground micrometric screw enables fi ne adjustment of 2 μm (.00008"). Large TiN-coated dial is easy to adjust and read.
  • Standard steel and carbide boring bars adjust in length for maximum stability.
  • Aluminium diameter extender with insert cartridges and counterweight used for diameters starting at 86mm (3.38") for maximum fl exibility.
  • Through coolant at the cutting edge improves tool life, surface fi nish, and chip evacuation.

FBHO • Offset Boring Bar Heads for Fine Finishing 

  • Diameters 9,75–88,1mm (.384–3.46").
  • KM™, HSK, and inch straight shank back end styles available.
  • Precision-ground micrometric screw enables fi ne adjustment of 2 μm (.00008") via easy-to-read vernier scale.
  • Standard steel and carbide boring bars can be adjusted in length for maximum stability.
  • Through coolant at the cutting edge improves tool life, surface fi nish, and chip evacuation.

FBHS • Cartridge Boring Heads for Fine Finishing 

  • Diameters 23,5–153mm (.925–6.024").
  • KM, HSK, and inch straight shank back end styles available.
  • Precision-ground micrometric screw enables fi ne adjustment of 2 μm (.00008") via easy-to-read vernier scale.
  • Large selection of insert holders:
    -95° - for use with wiper turning inserts.
    -90° regular diameter - for efficient machining in large depths of cut.
    -90° oversized diameter - for enhanced boring head diameter capabilities.
  •   Generous clearance and through coolant at the cutting edge improve tool life, surface fi nish, and chip evacuation.

BT • Bridge Tools for Rough and Finish Boring 

  • Diameters 150–2,205mm (5.91–86.81"). 
  • Sophisticated ground serration and T-style bolt clamping provide high cutting forces, and prevent diameter changes when heads are clamped.
  • Only 10 bridge consoles are needed for diameters up to 655mm (25.7").
  • KM, HSK, and some steep taper adaptors with ground serration available as standard. Through coolant at the cutting edge improves tool life and surface fi nish.
  • Diameters 650–2,205mm (25.5–86.81") covered by three aluminium-based consoles and two sets of steel slides for mounting rough and fi nish boring heads.
  • 90° roughing head sets ensure precise height alignment, and negative standard inserts enable high metal removal rates.
  • Counterweight for better balancing and fi ne-boring head with precision-ground micrometric screw for adjustments of 2 μm (.00008").

Browse ModBORE Products

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (76)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (76)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (76)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (76)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (76)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (76)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (76)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (76)
  • M Stainless Steel (76)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (76)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (76)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (76)
  • K Cast Iron (76)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (76)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (76)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (76)
  • N Non-Ferrous Materials (76)
    • N1
      Wrought Aluminum
      (76)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (76)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (62)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (76)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (76)
    • N6
      Carbon, Graphite Composites, CFRP
      (76)
    • N7
      MMC's
      (76)
  • S High-Temp Alloys (76)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (76)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (76)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (76)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (76)
  • H Hardened Materials (76)
    • H1
      Hardened Materials 44-48 HRC
      (76)
    • H2
      Hardened Materials 48-55 HRC
      (76)
    • H3
      Hardened Materials 56-60 HRC
      (76)
    • H4
      Hardened Materials >60 HRC
      (70)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (57)
  • Blind Hole Finishing Blind Hole Finishing (61)
  • Multiple Direction Cutting Multiple Direction Cutting (14)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (57)
  • Through Hole Finishing Through Hole Finishing (61)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (39)
  • Interrupted (8)
  • Lightly Interrupted Cut (39)
  • Smooth Cut (39)
  • Varying Depth of Cut (39)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 70.0 (6)
  • 90.0 (32)
  • 95.0 (1)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (1)
  • MODBORE Boring Bar (10)
  • MODBORE Screw-On Head (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (14)
  • 4.0 (14)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (57)
  • 0.004 in (70)
  • 0.008 in (70)
  • 0.016 in (76)
  • 0.031 in (76)
  • 0.047 in (43)
  • 0.062 in (5)
  • 0.063 in (37)
  • 0.094 in (8)
  • 0.095 in (8)
  • 0.126 in (8)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (57)
  • 0.1 mm (70)
  • 0.2 mm (70)
  • 0.4 mm (76)
  • 0.8 mm (76)
  • 1.201 mm (43)
  • 1.576 mm (5)
  • 1.6 mm (37)
  • 2.375 mm (8)
  • 2.401 mm (8)
  • 3.2 mm (8)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (20)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (20)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (13)
  • 241 (5)
  • CL4 (5)
  • CM2 (13)
  • CM3 (5)
  • CM4 (13)
  • CPX (13)
  • CW2 (5)
  • GX (5)
  • HT2 (70)
  • HTX (70)
  • K060 (5)
  • K090 (13)
  • K1 (5)
  • K10M (61)
  • K10P (61)
  • K10U (62)
  • K110M (42)
  • K15U (62)
  • K20K (61)
  • K21 (5)
  • K25M (55)
  • K25P (5)
  • K313 (76)
  • K35P (8)
  • K420 (13)
  • K45 (5)
  • K68 (76)
  • KB1340 (5)
  • KB1345 (37)
  • KB1610 (62)
  • KB1625 (5)
  • KB1630 (70)
  • KB5610 (62)
  • KB5625 (62)
  • KB5630 (62)
  • KB9610 (62)
  • KB9640 (5)
  • KBH10 (62)
  • KBH10B (5)
  • KBH20 (70)
  • KBH20B (5)
  • KBK35 (5)
  • KC210 (5)
  • KC250 (13)
  • KC5010 (76)
  • KC5025 (76)
  • KC5410 (76)
  • KC5510 (13)
  • KC5525 (5)
  • KC710 (5)
  • KC720 (76)
  • KC722 (5)
  • KC725M (13)
  • KC730 (76)
  • KC7310 (13)
  • KC732 (76)
  • KC8050 (76)
  • KC810 (76)
  • KC850 (76)
  • KC9010 (70)
  • KC9025 (76)
  • KC910 (76)
  • KC9105 (76)
  • KC9110 (76)
  • KC9120 (70)
  • KC9125 (76)
  • KC9140 (13)
  • KC9145 (13)
  • KC915M (24)
  • KC9215 (13)
  • KC9225 (76)
  • KC9240 (76)
  • KC9240NEW (76)
  • KC9245 (13)
  • KC9315 (76)
  • KC9320 (76)
  • KC9325 (76)
  • KC935 (76)
  • KC950 (70)
  • KC990 (70)
  • KCD25 (68)
  • KCK05 (76)
  • KCK05B (70)
  • KCK15 (76)
  • KCK15B (76)
  • KCK20 (76)
  • KCK20B (76)
  • KCM15 (76)
  • KCM15B (76)
  • KCM25 (76)
  • KCM25B (76)
  • KCM35 (76)
  • KCM35B (37)
  • KCP05 (76)
  • KCP05B (29)
  • KCP10 (76)
  • KCP10B (76)
  • KCP25 (76)
  • KCP25B (76)
  • KCP25C (76)
  • KCP30 (76)
  • KCP30B (43)
  • KCP40 (13)
  • KCP40B (13)
  • KCPK05 (13)
  • KCS10 (70)
  • KCS10B (76)
  • KCU10 (76)
  • KCU25 (76)
  • KD050 (62)
  • KD081 (62)
  • KD100 (5)
  • KD120 (5)
  • KD1400 (62)
  • KD1405 (5)
  • KD1425 (62)
  • KM1 (5)
  • KMF (5)
  • KS15 (5)
  • KT1120 (5)
  • KT125 (5)
  • KT150 (5)
  • KT175 (62)
  • KT315 (70)
  • KT325 (70)
  • KTP10 (57)
  • KU10 (57)
  • KU10T (70)
  • KU30T (76)
  • KY1310 (13)
  • KY1320 (13)
  • KY1540 (5)
  • KY1615 (13)
  • KY2000 (13)
  • KY2100 (5)
  • KY3000 (13)
  • KY3400 (13)
  • KY3500 (13)
  • KY4000 (13)
  • KY4300 (13)
  • KY4400 (13)
  • KYHK15B (13)
  • KYK10 (5)
  • KYK25 (13)
  • KYK35 (13)
  • KYS25 (5)
  • KYS30 (5)
  • NL200 (5)
  • NL250 (13)
  • NL300 (19)
  • NL400 (13)
  • NL920 (19)
  • P25 (5)
  • PS5 (5)
  • SP0819 (13)
  • SP3019 (13)
  • SP4019 (19)
  • X00511 (5)
  • X00580 (5)
  • X00581 (5)
  • X00582 (5)
  • X00583 (5)
  • X00584 (5)
  • X00585 (5)
  • X00586 (5)
  • X00591 (5)
  • X00592 (5)
  • X00593 (5)
  • X00594 (5)
  • X00596 (5)
  • X00597 (5)
  • X00599 (5)
Hand Of Tool
Hand Of Tool
  • R (15)
Wiper Insert
Wiper Insert
  • N (14)
  • Y (14)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 5.801 mm (1)
  • 9.75 mm (1)
  • 10.75 mm (1)
  • 12.75 mm (1)
  • 13.75 mm (1)
  • 16.75 mm (1)
  • 17.75 mm (1)
  • 21.75 mm (2)
  • 23.5 mm (2)
  • 24.75 mm (1)
  • 27.75 mm (1)
  • 29.5 mm (2)
  • 29.75 mm (1)
  • 31.75 mm (1)
  • 34.75 mm (1)
  • 38.75 mm (1)
  • 39.5 mm (1)
  • 39.901 mm (2)
  • 42.75 mm (1)
  • 49.5 mm (2)
  • 65.5 mm (3)
  • 86.5 mm (7)
  • 114.5 mm (4)
  • 124.9 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.228 in (1)
  • 0.384 in (1)
  • 0.423 in (1)
  • 0.502 in (1)
  • 0.541 in (1)
  • 0.659 in (1)
  • 0.7 in (1)
  • 0.856 in (2)
  • 0.925 in (2)
  • 0.974 in (1)
  • 1.093 in (1)
  • 1.161 in (2)
  • 1.171 in (1)
  • 1.25 in (1)
  • 1.368 in (1)
  • 1.526 in (1)
  • 1.555 in (1)
  • 1.571 in (2)
  • 1.683 in (1)
  • 1.949 in (2)
  • 2.579 in (3)
  • 3.406 in (7)
  • 4.508 in (4)
  • 4.917 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.441 in (1)
  • 0.581 in (1)
  • 0.634 in (1)
  • 0.713 in (1)
  • 0.738 in (1)
  • 0.87 in (1)
  • 0.896 in (1)
  • 1.053 in (1)
  • 1.067 in (1)
  • 1.171 in (1)
  • 1.201 in (2)
  • 1.289 in (1)
  • 1.447 in (1)
  • 1.565 in (1)
  • 1.575 in (1)
  • 1.579 in (1)
  • 1.736 in (1)
  • 1.895 in (2)
  • 1.988 in (1)
  • 2.012 in (2)
  • 2.618 in (2)
  • 3.446 in (3)
  • 4.547 in (7)
  • 6.024 in (4)
  • 7.524 in (1)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 11.201 mm (1)
  • 14.75 mm (1)
  • 16.1 mm (1)
  • 18.1 mm (1)
  • 18.75 mm (1)
  • 22.1 mm (1)
  • 22.75 mm (1)
  • 26.75 mm (1)
  • 27.1 mm (1)
  • 29.75 mm (1)
  • 30.5 mm (2)
  • 32.75 mm (1)
  • 36.75 mm (1)
  • 39.75 mm (1)
  • 40.0 mm (1)
  • 40.1 mm (1)
  • 44.1 mm (1)
  • 48.1 mm (2)
  • 50.5 mm (1)
  • 51.1 mm (2)
  • 66.5 mm (2)
  • 87.5 mm (3)
  • 115.5 mm (7)
  • 153.0 mm (4)
  • 191.101 mm (1)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (15)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (15)
Maximum Bore Depth
Maximum Bore Depth
  • 1.181 in (1)
  • 1.575 in (2)
  • 1.772 in (1)
  • 1.891 in (1)
  • 2.165 in (1)
  • 2.362 in (1)
  • 2.52 in (2)
  • 2.559 in (1)
  • 2.757 in (3)
  • 3.346 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 30.0 mm (1)
  • 40.0 mm (2)
  • 45.0 mm (1)
  • 48.0 mm (1)
  • 55.0 mm (1)
  • 60.0 mm (1)
  • 64.0 mm (2)
  • 65.0 mm (1)
  • 70.0 mm (3)
  • 85.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • H (1)
  • S (14)
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (39)
  • W-TRIGON 80 (1)
Cartridge Size
Cartridge Size
  • 17 (2)
  • 30 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.221 in (1)
  • 0.29 in (1)
  • 0.317 in (1)
  • 0.356 in (1)
  • 0.369 in (1)
  • 0.435 in (1)
  • 0.448 in (1)
  • 0.527 in (1)
  • 0.533 in (1)
  • 0.586 in (1)
  • 0.645 in (1)
  • 0.723 in (1)
  • 0.782 in (1)
  • 0.868 in (1)
  • 0.948 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.601 mm (1)
  • 7.375 mm (1)
  • 8.05 mm (1)
  • 9.05 mm (1)
  • 9.375 mm (1)
  • 11.05 mm (1)
  • 11.375 mm (1)
  • 13.375 mm (1)
  • 13.55 mm (1)
  • 14.875 mm (1)
  • 16.375 mm (1)
  • 18.375 mm (1)
  • 19.875 mm (1)
  • 22.05 mm (1)
  • 24.05 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.379 in (1)
  • 2.449 in (1)
  • 2.48 in (1)
  • 2.709 in (1)
  • 2.777 in (2)
  • 2.969 in (1)
  • 3.016 in (1)
  • 3.228 in (1)
  • 3.253 in (1)
  • 3.277 in (1)
  • 3.299 in (1)
  • 3.386 in (5)
  • 3.465 in (1)
  • 3.496 in (1)
  • 3.543 in (2)
  • 3.59 in (1)
  • 3.63 in (1)
  • 3.74 in (1)
  • 3.781 in (3)
  • 3.976 in (1)
  • 4.331 in (1)
  • 4.562 in (1)
  • 4.567 in (2)
  • 4.65 in (1)
  • 4.724 in (2)
  • 4.764 in (1)
  • 4.87 in (1)
  • 5.182 in (1)
  • 5.594 in (1)
  • 5.748 in (3)
  • 5.906 in (1)
  • 6.055 in (1)
  • 6.646 in (1)
  • 7.323 in (1)
  • 9.685 in (1)
  • 11.89 in (1)
Gage Length
Gage Length
  • 86 mm (5)
  • 146 mm (3)
  • 96 mm (3)
  • 116 mm (2)
  • 120 mm (2)
  • 90 mm (2)
  • 101 mm (1)
  • 110 mm (1)
  • 121 mm (1)
  • 150 mm (1)
  • 186 mm (1)
  • 246 mm (1)
  • 302 mm (1)
  • 35 mm (1)
  • 63 mm (1)
  • 82 mm (1)
  • 88 mm (1)
  • 95 mm (1)
  • 62.2 mm (1)
  • 68.8 mm (1)
  • 70.5 mm (2)
  • 75.4 mm (1)
  • 76.601 mm (1)
  • 82.601 mm (1)
  • 83.2 mm (1)
  • 83.801 mm (1)
  • 88.801 mm (1)
  • 91.176 mm (1)
  • 92.2 mm (1)
  • 115.875 mm (1)
  • 118.101 mm (1)
  • 123.7 mm (1)
  • 131.625 mm (1)
  • 142.1 mm (1)
  • 153.8 mm (1)
  • 168.8 mm (1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (33)
  • B L (33)
  • C A (8)
  • C N (8)
  • D P (27)
  • H T (33)
  • H W (39)
Back-End
Connection Type
Connection Type
  • BORING BAR (1)
  • BORING BAR HEAD (4)
  • KMTL MODBORE SYSTEM (10)
System Size
System Size
  • BT40 (1)
  • CV40 (1)
  • HSK63A (7)
  • KM32 (3)
  • KM40 (3)
  • KM50 (6)
  • KM50TS (1)
  • KM63UT (5)
Back-End Diameter
Back-End Diameter
  • 5.0 mm (1)
  • 10.0 mm (2)
  • 12.0 mm (1)
  • 14.0 mm (1)
  • 16.0 mm (13)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.197 in (1)
  • 0.394 in (2)
  • 0.473 in (1)
  • 0.551 in (1)
  • 0.63 in (13)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

90° Lead Split Depth of Cut Blades 90° Lead Split Depth of Cut Blades

ModBORE™ Twin Cutters
(6 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter Gage Insert Insert Screw ID Drive Size
4063996 SDB24RBHT06F SDB24RBHT06F 23.5000 .9252 30.5000 1.200 CC..0602../CC..215.. T7
    This item is no longer available
    Please contact customer service for assistance
    Your price:
    4063997 SDB30RBHT06F SDB30RBHT06F 29.5000 1.161 40.1000 1.578 CC..0602../CC..215.. T7
      List price:
      C$396.95 /each
      Your price:
      4063999 SDB50RBHT09F SDB50RBHT09F 49.5000 1.948 66.5000 2.618 CC..09T3../CC..325.. T15
        List price:
        C$437.16 /each
        Your price:
        4064000 SDB66RBHT12F SDB66RBHT12F 65.5000 2.578 87.5000 3.444 CC..1204../CC..43.. T20
          List price:
          C$623.49 /each
          Your price:
          4064002 SDB87RBHT12F SDB87RBHT12F 86.5000 3.405 115.5000 4.547 CC..1204../CC..43.. T20
            List price:
            C$3,343.12 /each
            Your price:
            4064203 SDB87RBHT16LF SDB87RBHT16LF 86.5000 3.405 115.5000 4.547 CN..1606../CN..54..  
              List price:
              C$1,092.36 /each
              Your price:
              List price:
              Discount: %
              Your price:
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              70° Lead Blade Sets 70° Lead Blade Sets

              ModBORE™ Twin Cutters
              (1 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter Gage Insert
              3556405 MB115RBHT16LK MB115RBHT16LK 114.5000 4.507 153.0000 6.023 CN..1606../CN..54..
                List price:
                C$1,021.69 /each
                Your price:
                List price:
                Discount: %
                Your price:
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance

                ORIGINAL PRODUCT

                90° Lead Simultaneous Adjusting Blade Sets 90° Lead Simultaneous Adjusting Blade Sets

                ModBORE™ Twin Cutters
                (4 Products)
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter Gage Insert
                2652984 SYB115RBHT16LF SYB115RBHT16LF 114.5000 4.507 153.0000 6.023 CNMG543
                  List price:
                  C$1,270.37 /each
                  Your price:
                  2652971 SYB66RBHT12LF SYB66RBHT12LF 65.5000 2.578 87.5000 3.444 CN..1204../CN..43..
                    List price:
                    C$683.38 /each
                    Your price:
                    2652972 SYB87RBHT12F SYB87RBHT12F 86.5000 3.405 115.5000 4.547 CC..1204../CC..43..
                      List price:
                      C$933.84 /each
                      Your price:
                      2652983 SYB87RBHT16LF SYB87RBHT16LF 86.5000 3.405 115.5000 4.547 CNMG543
                        List price:
                        C$1,032.62 /each
                        Your price:
                        List price:
                        Discount: %
                        Your price:
                        Replacement This item is no longer available
                        Replacement Product Please contact customer service for assistance

                        ORIGINAL PRODUCT

                        Insert Holders for FBHS 95° Lead • metric Insert Holders for FBHS 95° Lead • metric

                        ModBORE™ Boring Systems
                        (1 Products)
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter Gage Insert Insert Screw ID Drive Size
                        2649557 R40FBHS06LF R40FBHS06LF 39.9000 1.570 51.1000 2.011 CC..0602../CC..215.. T7