Combination Tools
Combination drilling tools integrate centering, drilling, and countersinking all into a single operation, increasing productivity by reducing cycle time and tool changes. The BF and SEFAS™ systems adapt to various hole geometries with full through-coolant capabilities. The HiPACS system achieves precise countersinking for aerospace applications. KenShape MaPACS and MaxPACS countersinks excel in manual CFRP countersinking for aerospace rivet hole drilling, offering minimal operator effort, superior hole quality, and competitive cost per hole. These tools set new benchmarks in cost-effectiveness and flexibility.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (224)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(224)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(224)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(224)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(224)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(224)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(224)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(180)
- M Stainless Steel (115)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(115)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(115)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(112)
- K Cast Iron (225)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(225)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(225)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(225)
- N Non-Ferrous Materials (126)
- N1Wrought Aluminum (126)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(126)
- N3High-Silicon Aluminum Alloys Si >12.2%(126)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (126)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (116)
- N6Carbon, Graphite Composites, CFRP (116)
- N7MMC's (113)
- S High-Temp Alloys (122)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(112)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(112)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(112)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(122)
- H Hardened Materials (45)
- H1Hardened Materials 44-48 HRC(45)
- H2Hardened Materials 48-55 HRC(45)
- H3Hardened Materials 56-60 HRC(45)
- H4Hardened Materials >60 HRC(45)
- C CFRP Materials (28)
- C1CFRP, CFRP / CFRP (18)
- C2CFRP / Aluminium CFRP / Non-Ferrous (18)
- C3CFRP / Titanium CFRP / High Temp (18)
- C4CFRP / Stainless Steel (18)
Select First Choice
- IN (3)
Applications
Applications
Counterboring (11)
Countersinking (103)
Drilling (213)
Inclined Exit Drilling (57)
Stacked Plates Drilling (154)
Cutting Diameter
Cutting Diameter
- 0.125 in(1)
- 0.1339 in(1)
- 0.134 in(1)
- 0.1378 in(1)
- 0.1417 in(1)
- 0.1496 in(2)
- 0.1535 in(1)
- 0.1563 in(2)
- 0.157 in(1)
- 0.1575 in(3)
- 0.161 in(2)
- 0.1614 in(1)
- 0.1654 in(1)
- 0.1693 in(1)
- 0.1772 in(1)
- 0.181 in(2)
- 0.1811 in(1)
- 0.182 in(2)
- 0.1875 in(2)
- 0.1896 in(2)
- 0.1901 in(5)
- 0.1969 in(1)
- 0.2008 in(1)
- 0.201 in(2)
- 0.2047 in(1)
- 0.2087 in(1)
- 0.2126 in(1)
- 0.213 in(1)
- 0.2165 in(1)
- 0.218 in(2)
- 0.2185 in(1)
- 0.2187 in(1)
- 0.2188 in(4)
- 0.2205 in(1)
- 0.2283 in(1)
- 0.236 in(3)
- 0.2362 in(1)
- 0.24 in(2)
- 0.2402 in(1)
- 0.2441 in(1)
- 0.2496 in(4)
- 0.25 in(8)
- 0.252 in(1)
- 0.2559 in(1)
- 0.257 in(1)
- 0.2598 in(1)
- 0.2638 in(1)
- 0.2656 in(1)
- 0.2677 in(1)
- 0.2717 in(1)
- 0.2756 in(1)
- 0.2813 in(1)
- 0.287 in(2)
- 0.2874 in(1)
- 0.2913 in(1)
- 0.2953 in(1)
- 0.2969 in(1)
- 0.3071 in(1)
- 0.311 in(1)
- 0.3121 in(2)
- 0.3125 in(6)
- 0.313 in(1)
- 0.315 in(5)
- 0.3189 in(2)
- 0.319 in(3)
- 0.3228 in(1)
- 0.323 in(1)
- 0.3268 in(1)
- 0.3281 in(2)
- 0.3307 in(2)
- 0.332 in(1)
- 0.3346 in(1)
- 0.3386 in(1)
- 0.3425 in(1)
- 0.3438 in(3)
- 0.3465 in(1)
- 0.3543 in(1)
- 0.358 in(2)
- 0.3583 in(1)
- 0.3594 in(1)
- 0.368 in(1)
- 0.3701 in(1)
- 0.374 in(1)
- 0.375 in(6)
- 0.3858 in(1)
- 0.3906 in(1)
- 0.3937 in(3)
- 0.394 in(3)
- 0.3976 in(2)
- 0.398 in(2)
- 0.4016 in(1)
- 0.404 in(2)
- 0.4055 in(1)
- 0.4063 in(4)
- 0.4094 in(1)
- 0.4134 in(1)
- 0.4173 in(1)
- 0.4219 in(1)
- 0.4252 in(1)
- 0.4331 in(1)
- 0.437 in(3)
- 0.4375 in(2)
- 0.438 in(1)
- 0.4409 in(1)
- 0.4528 in(1)
- 0.4531 in(1)
- 0.4606 in(1)
- 0.4646 in(1)
- 0.4685 in(1)
- 0.472 in(3)
- 0.4724 in(2)
- 0.4764 in(1)
- 0.48 in(2)
- 0.4803 in(2)
- 0.4844 in(2)
- 0.4921 in(2)
- 0.5 in(1)
- 0.5118 in(1)
- 0.5156 in(1)
- 0.516 in(2)
- 0.5197 in(1)
- 0.5315 in(1)
- 0.551 in(3)
- 0.5512 in(4)
- 0.555 in(2)
- 0.5551 in(3)
- 0.5591 in(1)
- 0.5625 in(5)
- 0.563 in(4)
- 0.5669 in(3)
- 0.5709 in(1)
- 0.5827 in(1)
- 0.5906 in(3)
- 0.5945 in(2)
- 0.5984 in(2)
- 0.6055 in(2)
- 0.6094 in(2)
- 0.61 in(2)
- 0.6102 in(1)
- 0.6142 in(2)
- 0.622 in(2)
- 0.625 in(4)
- 0.6299 in(2)
- 0.63 in(3)
- 0.631 in(1)
- 0.6339 in(1)
- 0.6417 in(1)
- 0.6457 in(1)
- 0.6496 in(2)
- 0.65 in(1)
- 0.6535 in(1)
- 0.6563 in(1)
- 0.6575 in(1)
- 0.6693 in(1)
- 0.688 in(1)
- 0.689 in(3)
- 0.7087 in(1)
- 0.709 in(2)
- 0.75 in(1)
- 0.813 in(1)
- 0.938 in(1)
- -1.0 in(4)
to
Cutting Diameter
Cutting Diameter
- -1.0 mm(4)
- 3.175 mm(1)
- 3.4 mm(2)
- 3.5 mm(1)
- 3.6 mm(1)
- 3.8 mm(2)
- 3.9 mm(1)
- 3.9688 mm(1)
- 3.97 mm(1)
- 4.0 mm(4)
- 4.1 mm(3)
- 4.2 mm(1)
- 4.3 mm(1)
- 4.5 mm(1)
- 4.6 mm(3)
- 4.623 mm(2)
- 4.7625 mm(1)
- 4.763 mm(1)
- 4.816 mm(2)
- 4.828 mm(5)
- 5.0 mm(1)
- 5.1 mm(3)
- 5.2 mm(1)
- 5.3 mm(1)
- 5.4 mm(1)
- 5.41 mm(1)
- 5.5 mm(1)
- 5.55 mm(3)
- 5.558 mm(5)
- 5.6 mm(1)
- 5.8 mm(1)
- 6.0 mm(4)
- 6.1 mm(3)
- 6.2 mm(1)
- 6.34 mm(4)
- 6.35 mm(8)
- 6.4 mm(1)
- 6.5 mm(1)
- 6.528 mm(1)
- 6.6 mm(1)
- 6.7 mm(1)
- 6.746 mm(1)
- 6.8 mm(1)
- 6.9 mm(1)
- 7.0 mm(1)
- 7.145 mm(1)
- 7.3 mm(3)
- 7.4 mm(1)
- 7.5 mm(1)
- 7.5406 mm(1)
- 7.8 mm(1)
- 7.9 mm(1)
- 7.927 mm(2)
- 7.938 mm(6)
- 7.95 mm(1)
- 8.0 mm(5)
- 8.1 mm(5)
- 8.2 mm(1)
- 8.204 mm(1)
- 8.3 mm(1)
- 8.334 mm(1)
- 8.3344 mm(1)
- 8.4 mm(2)
- 8.433 mm(1)
- 8.5 mm(1)
- 8.6 mm(1)
- 8.7 mm(1)
- 8.733 mm(3)
- 8.8 mm(1)
- 9.0 mm(1)
- 9.1 mm(3)
- 9.129 mm(1)
- 9.347 mm(1)
- 9.4 mm(1)
- 9.5 mm(1)
- 9.525 mm(6)
- 9.8 mm(1)
- 9.921 mm(1)
- 10.0 mm(6)
- 10.1 mm(4)
- 10.2 mm(1)
- 10.262 mm(2)
- 10.3 mm(1)
- 10.32 mm(4)
- 10.4 mm(1)
- 10.5 mm(1)
- 10.6 mm(1)
- 10.7156 mm(1)
- 10.8 mm(1)
- 11.0 mm(1)
- 11.1 mm(3)
- 11.112 mm(1)
- 11.113 mm(1)
- 11.125 mm(1)
- 11.2 mm(1)
- 11.5 mm(1)
- 11.508 mm(1)
- 11.7 mm(1)
- 11.8 mm(1)
- 11.9 mm(1)
- 12.0 mm(5)
- 12.1 mm(1)
- 12.2 mm(4)
- 12.304 mm(2)
- 12.5 mm(2)
- 12.7 mm(1)
- 13.0 mm(1)
- 13.096 mm(1)
- 13.1 mm(2)
- 13.2 mm(1)
- 13.5 mm(1)
- 14.0 mm(7)
- 14.1 mm(5)
- 14.2 mm(1)
- 14.288 mm(5)
- 14.3 mm(4)
- 14.4 mm(3)
- 14.5 mm(1)
- 14.8 mm(1)
- 15.0 mm(3)
- 15.1 mm(2)
- 15.2 mm(2)
- 15.38 mm(2)
- 15.479 mm(2)
- 15.5 mm(3)
- 15.6 mm(2)
- 15.8 mm(2)
- 15.875 mm(4)
- 16.0 mm(5)
- 16.027 mm(1)
- 16.1 mm(1)
- 16.3 mm(1)
- 16.4 mm(1)
- 16.5 mm(3)
- 16.6 mm(1)
- 16.67 mm(1)
- 16.7 mm(1)
- 17.0 mm(1)
- 17.475 mm(1)
- 17.5 mm(3)
- 18.0 mm(3)
- 19.05 mm(1)
- 20.65 mm(1)
- 23.825 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 10.0 mm(1)
- 10.6 mm(1)
- 11.2 mm(1)
- 12.3 mm(2)
- 12.9 mm(1)
- 13.3 mm(1)
- 13.4 mm(1)
- 13.7 mm(1)
- 14.2 mm(1)
- 14.7 mm(1)
- 15.6 mm(1)
- 15.8 mm(1)
- 15.9 mm(1)
- 16.6 mm(1)
- 17.6 mm(1)
- 17.8 mm(1)
- 18.2 mm(1)
- 18.6 mm(1)
- 19.0 mm(1)
- 19.3 mm(1)
- 19.4 mm(2)
- 19.5 mm(1)
- 20.3 mm(1)
- 21.0 mm(1)
- 21.1 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.2 mm(1)
- 22.5 mm(1)
- 22.6 mm(1)
- 22.9 mm(1)
- 23.2 mm(1)
- 23.4 mm(1)
- 23.5 mm(1)
- 23.9 mm(1)
- 24.2 mm(1)
- 24.6 mm(1)
- 24.9 mm(1)
- 25.0 mm(10)
- 25.3 mm(1)
- 25.4 mm(1)
- 25.5 mm(1)
- 26.2 mm(1)
- 26.5 mm(1)
- 26.6 mm(2)
- 26.8 mm(2)
- 27.0 mm(3)
- 27.2 mm(1)
- 27.4 mm(1)
- 27.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.3 mm(1)
- 28.4 mm(1)
- 28.5 mm(1)
- 28.8 mm(1)
- 29.1 mm(1)
- 29.5 mm(1)
- 29.6 mm(1)
- 29.9 mm(1)
- 30.0 mm(8)
- 30.7 mm(1)
- 31.0 mm(1)
- 31.2 mm(2)
- 31.4 mm(1)
- 31.5 mm(2)
- 31.7 mm(1)
- 31.9 mm(1)
- 32.2 mm(1)
- 32.4 mm(1)
- 32.7 mm(1)
- 32.9 mm(2)
- 33.1 mm(2)
- 33.8 mm(2)
- 34.3 mm(1)
- 34.5 mm(1)
- 34.8 mm(1)
- 34.9 mm(1)
- 35.0 mm(1)
- 35.56 mm(1)
- 35.6 mm(1)
- 36.0 mm(1)
- 36.7 mm(1)
- 36.9 mm(1)
- 37.6 mm(1)
- 38.5 mm(1)
- 38.6 mm(1)
- 38.7 mm(1)
- 40.2 mm(1)
- 40.7 mm(1)
- 41.5 mm(1)
- 41.7 mm(1)
- 42.0 mm(1)
- 42.2 mm(1)
- 43.1 mm(1)
- 43.5 mm(2)
- 43.6 mm(1)
- 44.5 mm(1)
- 45.0 mm(1)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 58.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.3937 in(1)
- 0.4173 in(1)
- 0.4409 in(1)
- 0.4843 in(2)
- 0.5079 in(1)
- 0.5236 in(1)
- 0.5276 in(1)
- 0.5394 in(1)
- 0.5591 in(1)
- 0.5787 in(1)
- 0.61 in(1)
- 0.622 in(1)
- 0.626 in(1)
- 0.6535 in(1)
- 0.6929 in(1)
- 0.7008 in(1)
- 0.7165 in(1)
- 0.7323 in(1)
- 0.748 in(1)
- 0.76 in(1)
- 0.7638 in(2)
- 0.7677 in(1)
- 0.7992 in(1)
- 0.8268 in(1)
- 0.8307 in(1)
- 0.8465 in(1)
- 0.8661 in(1)
- 0.874 in(1)
- 0.8858 in(1)
- 0.8898 in(1)
- 0.9016 in(1)
- 0.91 in(1)
- 0.9213 in(1)
- 0.9252 in(1)
- 0.9409 in(1)
- 0.9528 in(1)
- 0.9685 in(1)
- 0.9803 in(1)
- 0.9843 in(10)
- 0.9961 in(1)
- 1.0 in(2)
- 1.0315 in(1)
- 1.0433 in(1)
- 1.0472 in(1)
- 1.05 in(1)
- 1.0551 in(2)
- 1.06 in(1)
- 1.063 in(2)
- 1.0709 in(1)
- 1.0787 in(1)
- 1.08 in(1)
- 1.0906 in(1)
- 1.1024 in(1)
- 1.1142 in(1)
- 1.1181 in(1)
- 1.122 in(1)
- 1.1339 in(1)
- 1.1457 in(1)
- 1.1614 in(1)
- 1.1654 in(1)
- 1.1772 in(1)
- 1.1811 in(8)
- 1.2087 in(1)
- 1.2205 in(1)
- 1.2283 in(2)
- 1.2362 in(1)
- 1.24 in(1)
- 1.2402 in(1)
- 1.248 in(1)
- 1.2559 in(1)
- 1.2677 in(1)
- 1.2756 in(1)
- 1.2874 in(1)
- 1.2953 in(2)
- 1.3031 in(2)
- 1.3307 in(2)
- 1.3504 in(1)
- 1.3583 in(1)
- 1.3701 in(1)
- 1.374 in(1)
- 1.378 in(1)
- 1.4 in(1)
- 1.4016 in(1)
- 1.42 in(1)
- 1.4449 in(1)
- 1.4528 in(1)
- 1.4803 in(1)
- 1.5157 in(1)
- 1.5197 in(1)
- 1.5236 in(1)
- 1.5827 in(1)
- 1.6024 in(1)
- 1.6339 in(1)
- 1.6417 in(1)
- 1.65 in(1)
- 1.6614 in(1)
- 1.6969 in(1)
- 1.71 in(2)
- 1.7165 in(1)
- 1.752 in(1)
- 1.77 in(1)
- 1.89 in(2)
- 1.9685 in(1)
- 2.01 in(1)
- 2.2834 in(1)
to
Reach
Reach
- 0.7165 in(1)
- 0.7441 in(1)
- 0.7717 in(1)
- 0.8228 in(2)
- 0.8504 in(1)
- 0.8701 in(1)
- 0.878 in(1)
- 0.8937 in(1)
- 0.9173 in(1)
- 0.9409 in(1)
- 0.98 in(1)
- 1.0039 in(1)
- 1.0079 in(1)
- 1.0433 in(1)
- 1.0906 in(1)
- 1.1024 in(1)
- 1.122 in(1)
- 1.1417 in(1)
- 1.1614 in(1)
- 1.1811 in(1)
- 1.19 in(1)
- 1.1929 in(1)
- 1.2008 in(1)
- 1.2402 in(1)
- 1.2756 in(1)
- 1.2835 in(1)
- 1.2992 in(10)
- 1.3031 in(1)
- 1.3268 in(1)
- 1.3386 in(1)
- 1.3543 in(1)
- 1.3583 in(1)
- 1.374 in(1)
- 1.39 in(1)
- 1.3976 in(1)
- 1.4055 in(1)
- 1.4252 in(1)
- 1.437 in(1)
- 1.4764 in(1)
- 1.4786 in(2)
- 1.4797 in(1)
- 1.4921 in(1)
- 1.4961 in(5)
- 1.4972 in(1)
- 1.5118 in(1)
- 1.5156 in(1)
- 1.5157 in(1)
- 1.5591 in(1)
- 1.5748 in(1)
- 1.58 in(1)
- 1.5906 in(1)
- 1.5984 in(1)
- 1.6063 in(2)
- 1.6299 in(1)
- 1.6378 in(1)
- 1.65 in(1)
- 1.6535 in(1)
- 1.6693 in(1)
- 1.685 in(1)
- 1.689 in(1)
- 1.6929 in(1)
- 1.6969 in(1)
- 1.7283 in(1)
- 1.7323 in(1)
- 1.7677 in(1)
- 1.7756 in(1)
- 1.7913 in(1)
- 1.8307 in(1)
- 1.8465 in(1)
- 1.8583 in(1)
- 1.878 in(1)
- 1.8898 in(1)
- 1.8937 in(1)
- 1.9055 in(1)
- 1.9134 in(1)
- 1.9291 in(1)
- 1.9409 in(1)
- 1.9449 in(1)
- 1.9567 in(1)
- 1.9803 in(1)
- 1.9882 in(2)
- 2.0 in(1)
- 2.0354 in(2)
- 2.063 in(1)
- 2.0748 in(1)
- 2.0906 in(1)
- 2.0984 in(1)
- 2.1142 in(1)
- 2.1496 in(1)
- 2.1535 in(1)
- 2.2126 in(1)
- 2.2323 in(1)
- 2.2677 in(1)
- 2.3228 in(1)
- 2.3386 in(1)
- 2.3504 in(1)
- 2.4291 in(1)
- 2.4803 in(1)
- 2.5236 in(1)
- 2.5354 in(1)
- 2.5827 in(1)
- 2.6063 in(2)
- 2.6339 in(1)
- 2.685 in(2)
- 2.7362 in(1)
- 2.8504 in(2)
- 3.0118 in(1)
to
Reach
Reach
- 18.2 mm(1)
- 18.9 mm(1)
- 19.6 mm(1)
- 20.9 mm(2)
- 21.6 mm(1)
- 22.1 mm(1)
- 22.3 mm(1)
- 22.7 mm(1)
- 23.3 mm(1)
- 23.9 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 25.6 mm(1)
- 26.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.5 mm(1)
- 29.0 mm(1)
- 29.5 mm(1)
- 30.0 mm(1)
- 30.2 mm(1)
- 30.3 mm(1)
- 30.5 mm(1)
- 31.5 mm(1)
- 32.4 mm(1)
- 32.6 mm(1)
- 33.0 mm(10)
- 33.1 mm(1)
- 33.7 mm(1)
- 34.0 mm(1)
- 34.4 mm(1)
- 34.5 mm(1)
- 34.9 mm(1)
- 35.3 mm(1)
- 35.5 mm(1)
- 35.7 mm(1)
- 36.2 mm(1)
- 36.5 mm(1)
- 37.5 mm(1)
- 37.9 mm(1)
- 38.0 mm(10)
- 38.4 mm(1)
- 38.5 mm(1)
- 39.6 mm(1)
- 40.0 mm(1)
- 40.1 mm(1)
- 40.4 mm(1)
- 40.6 mm(1)
- 40.8 mm(2)
- 41.4 mm(1)
- 41.6 mm(1)
- 41.8 mm(1)
- 42.0 mm(1)
- 42.4 mm(1)
- 42.8 mm(1)
- 42.9 mm(1)
- 43.0 mm(1)
- 43.1 mm(1)
- 43.9 mm(1)
- 44.0 mm(1)
- 44.9 mm(1)
- 45.1 mm(1)
- 45.5 mm(1)
- 46.5 mm(1)
- 46.9 mm(1)
- 47.2 mm(1)
- 47.7 mm(1)
- 48.0 mm(1)
- 48.1 mm(1)
- 48.4 mm(1)
- 48.6 mm(1)
- 49.0 mm(1)
- 49.3 mm(1)
- 49.4 mm(1)
- 49.7 mm(1)
- 50.3 mm(1)
- 50.5 mm(2)
- 50.8 mm(1)
- 51.7 mm(2)
- 52.4 mm(1)
- 52.7 mm(1)
- 53.1 mm(1)
- 53.3 mm(1)
- 53.7 mm(1)
- 54.6 mm(1)
- 54.7 mm(1)
- 56.2 mm(1)
- 56.7 mm(1)
- 57.6 mm(1)
- 59.0 mm(1)
- 59.4 mm(1)
- 59.7 mm(1)
- 61.7 mm(1)
- 63.0 mm(1)
- 64.1 mm(1)
- 64.4 mm(1)
- 65.6 mm(1)
- 66.2 mm(2)
- 66.9 mm(1)
- 68.2 mm(2)
- 69.5 mm(1)
- 72.4 mm(2)
- 76.5 mm(1)
to
Connection Style
Connection Style
- BF Drill Shank (112)
- HC Drill Sleeve with Pocket (20)
- Straight-Cylindrical (60)
- Whistle Notch 2 (24)
Number of Flutes
Number of Flutes
- 1 (32)
- 2 (192)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (65)
- 1.0 (75)
to
Over All Length [L]
Over All Length [L]
- 1.3075 in(2)
- 1.3311 in(4)
- 1.3508 in(2)
- 1.949 in(1)
- 1.968 in(1)
- 2.1654 in(8)
- 2.224 in(1)
- 2.2835 in(3)
- 2.4409 in(7)
- 2.441 in(1)
- 2.598 in(1)
- 2.5984 in(9)
- 2.677 in(1)
- 2.775 in(1)
- 2.913 in(1)
- 2.9134 in(11)
- 2.9528 in(5)
- 3.071 in(1)
- 3.11 in(1)
- 3.1102 in(7)
- 3.1496 in(11)
- 3.169 in(1)
- 3.2283 in(1)
- 3.248 in(2)
- 3.307 in(1)
- 3.3071 in(10)
- 3.4449 in(12)
- 3.5039 in(7)
- 3.5827 in(1)
- 3.6023 in(4)
- 3.7008 in(1)
- 3.7402 in(9)
- 3.8307 in(8)
- 3.831 in(1)
- 4.0157 in(13)
- 4.016 in(1)
- 4.06 in(2)
- 4.1142 in(1)
- 4.13 in(1)
- 4.2126 in(3)
- 4.252 in(1)
- 4.31 in(1)
- 4.311 in(1)
- 4.3125 in(1)
- 4.3701 in(3)
- 4.4488 in(1)
- 4.5276 in(5)
- 4.6063 in(2)
- 4.622 in(6)
- 4.63 in(1)
- 4.6457 in(2)
- 4.7441 in(1)
- 4.7638 in(2)
- 4.803 in(1)
- 4.8425 in(1)
- 5.0039 in(9)
- 5.0157 in(8)
- 5.1417 in(1)
- 5.2165 in(1)
- 5.236 in(1)
- 5.394 in(1)
- 5.551 in(1)
- 5.63 in(1)
- 5.669 in(1)
- 5.75 in(1)
- 5.88 in(1)
- 6.06 in(1)
- 6.13 in(1)
- 6.31 in(1)
- 6.44 in(2)
- 6.56 in(2)
- 6.625 in(1)
- 6.6875 in(1)
- 7.25 in(1)
- 7.5 in(1)
to
Over All Length [L]
Over All Length [L]
- 33.21 mm(2)
- 33.81 mm(4)
- 34.31 mm(2)
- 49.5 mm(1)
- 50.0 mm(1)
- 55.0 mm(8)
- 56.5 mm(1)
- 58.0 mm(3)
- 62.0 mm(8)
- 66.0 mm(10)
- 68.0 mm(1)
- 70.5 mm(1)
- 74.0 mm(12)
- 75.0 mm(10)
- 78.0 mm(1)
- 79.0 mm(8)
- 80.0 mm(11)
- 80.5 mm(1)
- 82.0 mm(1)
- 82.5 mm(1)
- 84.0 mm(11)
- 87.5 mm(12)
- 89.0 mm(7)
- 91.0 mm(1)
- 94.0 mm(1)
- 95.0 mm(9)
- 97.3 mm(9)
- 102.0 mm(14)
- 103.12 mm(1)
- 103.124 mm(1)
- 104.5 mm(1)
- 104.902 mm(1)
- 107.0 mm(3)
- 108.0 mm(1)
- 109.474 mm(1)
- 109.5 mm(1)
- 109.538 mm(1)
- 111.0 mm(3)
- 113.0 mm(1)
- 115.0 mm(5)
- 117.0 mm(2)
- 117.4 mm(6)
- 117.6 mm(1)
- 118.0 mm(2)
- 120.5 mm(1)
- 121.0 mm(2)
- 122.0 mm(1)
- 123.0 mm(1)
- 127.1 mm(9)
- 127.4 mm(8)
- 130.6 mm(1)
- 132.5 mm(1)
- 133.0 mm(1)
- 137.0 mm(1)
- 141.0 mm(1)
- 143.0 mm(1)
- 144.0 mm(1)
- 146.05 mm(1)
- 149.352 mm(1)
- 153.924 mm(1)
- 155.7 mm(1)
- 160.27 mm(1)
- 163.576 mm(1)
- 163.58 mm(1)
- 166.37 mm(1)
- 166.624 mm(1)
- 168.275 mm(1)
- 169.99 mm(1)
- 184.15 mm(1)
- 190.5 mm(1)
to
Corner Radius
Corner Radius
- 0.036 in(3)
- 0.046 in(1)
to
Corner Radius
Corner Radius
- 0.925 mm(3)
- 1.175 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(38)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(38)
to
Application
Coating
Coating
- TiN (11)
- TiN/TiAlN (78)
- Uncoated (24)
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (91)
- KC7015 (37)
- KC7215 (39)
- KC7315 (102)
- KC7325 (3)
- KC7410 (13)
- KCC05 (10)
- KCC10 (3)
- KCMS15 (3)
- KCP15 (21)
- KCP15A (3)
- KCPM45 (10)
- KCU15 (88)
- KD1415 (8)
- KD1425 (5)
- KDC05 (5)
- KDC15 (5)
- KM1 (25)
- KMF (86)
- KN15 (3)
Hand Of Tool
Hand Of Tool
- R (224)
Wiper Insert
Wiper Insert
- N (38)
Drill Type
Drill Type
- 81-01 (116)
- 81-05 (4)
- 86-01 (13)
- 86-04 (8)
- 86-05 (4)
- 86-09 (79)
Countersunk Angle
Countersunk Angle
- 30.0 (50)
- 41.0 (85)
- 45.0 (99)
- 50.0 (8)
- 65.0 (1)
to
Front-End
Adapter Front-End
Adapter Front-End
- HYDRAULIC CHUCK (33)
- HYDRAULIC CHUCK-SLIM LINE (10)
Cutting Width
Cutting Width
- 0.2283 in(1)
- 0.2402 in(1)
- 0.3858 in(2)
to
Cutting Width
Cutting Width
- 5.8 mm(1)
- 6.1 mm(1)
- 9.8 mm(2)
to
Front End Type
Front End Type
- ZYL - Cylindrical Adapter (43)
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (122)
- KENTIP DRILL (21)
- KENTIP FUSION DRILL (3)
Front End Style
Front End Style
- ZYL01 Straight Shank (43)
Gage Length
Gage Length
- 70.0000 in(2)
- 75.0000 in(5)
- 77.0000 in(2)
- 80.0000 in(2)
- 85.0000 in(1)
- 90.0000 in(5)
- 95.0000 in(3)
- 95.2500 in(2)
- 100.0000 in(1)
- 150.0000 in(7)
- 152.4000 in(2)
- 170.0000 in(7)
- 200.0000 in(4)
Gage Length
Gage Length
- 70.0000 mm(2)
- 75.0000 mm(5)
- 77.0000 mm(2)
- 80.0000 mm(2)
- 85.0000 mm(1)
- 90.0000 mm(5)
- 95.0000 mm(3)
- 95.2500 mm(2)
- 100.0000 mm(1)
- 150.0000 mm(7)
- 152.4000 mm(2)
- 170.0000 mm(7)
- 200.0000 mm(4)
Point Angle
Point Angle
- -1.0 (4)
- 90.0 (5)
- 120.0 (5)
- 128.0 (10)
- 135.0 (99)
- 140.0 (13)
- 180.0 (6)
to
Front End Size
Front End Size
- 12.0 in(42)
- 12.7 in(1)
to
Front End Size
Front End Size
- 12.0 mm(42)
- 12.7 mm(1)
to
Insert Geometry
Shape
Shape
- COUNTERBORE/COUNTERSINK MISC (38)
Cutting Tool Material
Cutting Tool Material
- D P (6)
- H W (32)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (216)
System Size
System Size
- BT30 (1)
- BT40 (2)
- BT50 (2)
- CV40 (3)
- CV50 (3)
- DV40 (2)
- DV50 (2)
- HSK100A (3)
- HSK32C (1)
- HSK40A (2)
- HSK40C (1)
- HSK50A (1)
- HSK50C (1)
- HSK63A (3)
- HSK63C (1)
- HSK80A (1)
- KM40TS (1)
- KM4X100 (2)
- KM4X63 (3)
- KM50TS (1)
- KM63TS (2)
- KM63XMZ (1)
- PSC50 (1)
- PSC63 (1)
Back-End Diameter
Back-End Diameter
- 4.0 mm(8)
- 5.0 mm(8)
- 6.0 mm(18)
- 7.0 mm(12)
- 8.0 mm(17)
- 9.0 mm(13)
- 10.0 mm(11)
- 11.0 mm(11)
- 12.0 mm(12)
- 13.0 mm(5)
- 14.0 mm(5)
- 15.0 mm(7)
- 15.5 mm(2)
- 15.875 mm(1)
- 16.0 mm(5)
- 17.0 mm(2)
- 18.0 mm(2)
- 19.05 mm(16)
- 20.0 mm(20)
- 25.4 mm(9)
- 25.7 mm(1)
- 27.7 mm(1)
- 29.7 mm(1)
- 31.6 mm(1)
- 31.75 mm(12)
- 32.0 mm(22)
- 33.6 mm(1)
- 37.6 mm(1)
- 38.1 mm(2)
- 39.6 mm(1)
- 40.0 mm(4)
- 41.6 mm(1)
- 44.45 mm(7)
- 50.0 mm(4)
- 63.0 mm(11)
- 69.85 mm(7)
- 80.0 mm(1)
- 100.0 mm(5)
to
Back-End Diameter
Back-End Diameter
- 0.1575 in(8)
- 0.1969 in(8)
- 0.2362 in(16)
- 0.2392 in(2)
- 0.2756 in(12)
- 0.315 in(17)
- 0.3543 in(13)
- 0.3937 in(11)
- 0.4331 in(11)
- 0.4724 in(12)
- 0.5118 in(5)
- 0.5512 in(5)
- 0.5906 in(7)
- 0.6102 in(2)
- 0.625 in(1)
- 0.6299 in(5)
- 0.6693 in(2)
- 0.7087 in(2)
- 0.75 in(16)
- 0.787 in(1)
- 0.7874 in(19)
- 1.0 in(9)
- 1.0118 in(1)
- 1.0906 in(1)
- 1.1693 in(1)
- 1.2441 in(1)
- 1.25 in(12)
- 1.258 in(1)
- 1.2598 in(21)
- 1.3228 in(1)
- 1.4803 in(1)
- 1.5 in(2)
- 1.5591 in(1)
- 1.573 in(2)
- 1.5748 in(2)
- 1.6378 in(1)
- 1.75 in(7)
- 1.9685 in(2)
- 1.969 in(1)
- 1.97 in(1)
- 2.478 in(7)
- 2.4803 in(4)
- 2.75 in(7)
- 3.1496 in(1)
- 3.934 in(3)
- 3.937 in(2)
to
No filters matching ""
