Counterbore Tools & Drilling Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (105)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (105)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (105)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (105)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (105)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (105)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (105)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (105)
  • M Stainless Steel (101)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (101)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (101)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (101)
  • K Cast Iron (130)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (130)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (130)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (130)
  • N Non-Ferrous Materials (68)
    • N1
      Wrought Aluminum
      (68)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (68)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (68)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (68)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (68)
    • N6
      Carbon, Graphite Composites, CFRP
      (68)
    • N7
      MMC's
      (68)
  • S High-Temp Alloys (100)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (100)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (100)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (100)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (100)
  • H Hardened Materials (55)
    • H1
      Hardened Materials 44-48 HRC
      (55)
    • H2
      Hardened Materials 48-55 HRC
      (55)
    • H3
      Hardened Materials 56-60 HRC
      (55)
    • H4
      Hardened Materials >60 HRC
      (55)
Applications
Applications
  • Counterboring Counterboring (35)
  • Drilling Drilling (35)
  • ID Thread Turning ID Thread Turning (1)
Cutting Diameter
Cutting Diameter
  • 0.595 in (1)
  • 0.635 in (1)
  • 0.674 in (1)
  • 0.714 in (2)
  • 0.794 in (2)
  • 0.812 in (1)
  • 0.834 in (2)
  • 0.873 in (2)
  • 0.912 in (2)
  • 0.953 in (2)
  • 0.991 in (2)
  • 1.0 in (1)
  • 1.031 in (1)
  • 1.07 in (1)
  • 1.109 in (1)
  • 1.187 in (1)
  • 1.188 in (1)
  • 1.268 in (1)
  • 1.307 in (1)
  • 1.346 in (1)
  • 1.375 in (1)
  • 1.387 in (1)
  • 1.425 in (1)
  • 1.504 in (1)
  • 1.583 in (1)
  • 1.625 in (1)
  • 1.661 in (1)
  • 1.819 in (1)
  • 2.0 in (1)
  • 2.375 in (1)
  • 2.75 in (1)
  • 3.125 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.125 mm (1)
  • 16.125 mm (1)
  • 17.125 mm (1)
  • 18.125 mm (2)
  • 20.175 mm (2)
  • 20.625 mm (1)
  • 21.175 mm (2)
  • 22.175 mm (2)
  • 23.175 mm (2)
  • 24.175 mm (2)
  • 25.175 mm (2)
  • 25.401 mm (1)
  • 26.175 mm (1)
  • 27.175 mm (1)
  • 28.175 mm (1)
  • 30.151 mm (1)
  • 30.175 mm (1)
  • 32.2 mm (1)
  • 33.2 mm (1)
  • 34.2 mm (1)
  • 34.926 mm (1)
  • 35.2 mm (1)
  • 36.2 mm (1)
  • 38.2 mm (1)
  • 40.2 mm (1)
  • 41.276 mm (1)
  • 42.2 mm (1)
  • 46.2 mm (1)
  • 50.801 mm (1)
  • 60.325 mm (1)
  • 69.851 mm (1)
  • 79.375 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (13)
  • Stable (68)
  • Unstable (28)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.5 mm (2)
  • 11.0 mm (1)
  • 12.701 mm (1)
  • 13.5 mm (3)
  • 15.875 mm (1)
  • 16.0 mm (7)
  • 18.5 mm (1)
  • 19.05 mm (1)
  • 21.0 mm (3)
  • 22.225 mm (1)
  • 23.0 mm (2)
  • 23.5 mm (3)
  • 25.401 mm (1)
  • 25.5 mm (3)
  • 27.5 mm (1)
  • 30.0 mm (1)
  • 30.5 mm (1)
  • 31.75 mm (1)
  • 33.5 mm (2)
  • 38.1 mm (1)
  • 44.45 mm (1)
  • 50.801 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.335 in (2)
  • 0.433 in (1)
  • 0.5 in (1)
  • 0.531 in (3)
  • 0.625 in (1)
  • 0.63 in (7)
  • 0.728 in (1)
  • 0.75 in (1)
  • 0.828 in (3)
  • 0.875 in (1)
  • 0.906 in (2)
  • 0.925 in (3)
  • 1.0 in (1)
  • 1.004 in (3)
  • 1.083 in (1)
  • 1.181 in (1)
  • 1.201 in (1)
  • 1.25 in (1)
  • 1.319 in (2)
  • 1.5 in (1)
  • 1.75 in (1)
  • 2.0 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.504 in (1)
  • 2.102 in (1)
  • 2.535 in (1)
  • 3.035 in (1)
Reach Min to Reach Max
Reach
Reach
  • 38.2 mm (1)
  • 53.401 mm (1)
  • 64.4 mm (1)
  • 77.101 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • Weldon (5)
  • Whistle Notch 2 (30)
Number of Flutes
Number of Flutes
  • 2 (12)
  • 3 (27)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (139)
  • 4.0 (23)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.008 in (3)
  • 0.016 in (53)
  • 0.024 in (4)
  • 0.031 in (20)
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.063 in (5)
  • 0.079 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (3)
  • 0.4 mm (53)
  • 0.601 mm (4)
  • 0.8 mm (20)
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.6 mm (5)
  • 2.0 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (100)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (100)
Corner Chamfer Min to Corner Chamfer Max
Application
Drilling Condition
Drilling Condition
  • Interrupted (52)
  • Smooth Cut (8)
  • Stable (107)
  • Unstable (67)
  • Varying Depth of Cut (8)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CD4 (43)
  • CM4 (41)
  • CS5 (40)
  • KC7140 (42)
  • KC720 (7)
  • KC7210 (42)
  • KC7215 (79)
  • KC7815 (7)
  • KCPK10 (44)
  • KCS10B (8)
  • KCU25 (52)
  • KCU40 (53)
  • KM1 (48)
Hand Of Tool
Hand Of Tool
  • R (39)
Wiper Insert
Wiper Insert
  • N (100)
Drill Type
Drill Type
  • 86-04 (39)
Insert Geometry
Shape
Shape
  • S-SQUARE 90 (100)
Insert IC Size
Insert IC Size
  • 6.351 mm (18)
  • 7.926 mm (23)
  • 9.525 mm (25)
  • 12.701 mm (24)
  • 15.875 mm (10)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (18)
  • 0.312 in (23)
  • 0.375 in (25)
  • 0.5 in (24)
  • 0.625 in (10)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.351 mm (18)
  • 7.926 mm (23)
  • 9.525 mm (25)
  • 12.701 mm (34)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.25 in (18)
  • 0.312 in (23)
  • 0.375 in (25)
  • 0.5 in (34)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 20 (43)
  • 21 (43)
  • 22 (4)
Cutting Tool Material
Cutting Tool Material
  • H W (100)
Tolerance Class
Tolerance Class
  • H (15)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (35)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 20.0 mm (23)
  • 25.401 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (7)
  • 38.1 mm (1)
  • 50.801 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.787 in (23)
  • 1.0 in (3)
  • 1.25 in (1)
  • 1.26 in (7)
  • 1.5 in (1)
  • 2.0 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Counter BoringCounter Boring
  • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
  • Flood Coolant: DrillingFlood Coolant: Drilling
  • Flute Configuration: 2Flute Configuration: 2
  • Flute Configuration: 3Flute Configuration: 3
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [LS] Shank Length [LS] Shank Length Gage Insert Number of Insert Cutting Diameter 1
1992509 CBT0813RW075N3 CBT0813RW075N3 20.6370 .8125 -0.150000 -0.006 0.150000 .0060 19.05 .75 13.4870 .5312 88.9100 3.500 12.7000 .5000 52.0 2.047 SPHX060204R.. 3
    List price:
    C$364.26 /each
    Your price:
    Qty
    1992511 CBT1000RW075N2 CBT1000RW075N2 25.4000 1.000 -0.150000 -0.006 0.150000 .0060 19.05 .75 16.6620 .6562 88.9100 3.500 15.8750 .6250 52.0 2.047 SPHX090304R.. 2
      List price:
      C$395.38 /each
      Your price:
      Qty
      1992584 CBT1375RW100N3 CBT1375RW100N3 34.9250 1.375 -0.196000 -0.007 0.196000 .0077 25.4 1.0 23.0120 .9062 101.6100 4.000 22.2250 .8750 58.4 2.299 SPHX090304R.. 3
        This item is no longer available
        Please contact customer service for assistance
        Your price:
        Qty
        1992774 CBT2375RW150N3 CBT2375RW150N3 60.3250 2.375 -0.196000 -0.007 0.196000 .0077 38.1 1.5 39.7000 1.562 126.9900 5.000 38.1000 1.500 68.598 2.700 SPHX120404R.. 3
          This item is no longer available
          Please contact customer service for assistance
          Your price:
          Qty
          1992775 CBT2750RW200N3 CBT2750RW200N3 69.8500 2.750 -0.196000 -0.007 0.196000 .0077 50.8 2.0 46.0500 1.812 152.3900 6.000 44.4500 1.750 83.0 3.267 SPHX120404R.. 3
            This item is no longer available
            Please contact customer service for assistance
            Your price:
            Qty
            1992776 CBT3125RW200N3 CBT3125RW200N3 79.3750 3.125 -0.196000 -0.007 0.196000 .0077 50.8 2.0 52.4000 2.062 165.0900 6.500 50.8000 2.000 83.0 3.267 SPHX150504R.. 3
              This item is no longer available
              Please contact customer service for assistance
              Your price:
              Qty
              List price:
              Discount: %
              Your price:
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              CTR Drilling Inserts
              (51 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
              1928669 SPHX060204R20 SPHX060204R20 KC7140 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
                List price:
                C$25.41 /each
                Your price:
                Qty
                1928670 SPHX070304R20 SPHX070304R20 KC7140 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.4000 .0156 12.000 7.000 7.000
                  List price:
                  C$27.23 /each
                  Your price:
                  Qty
                  1928667 SPHX090304R20 SPHX090304R20 KC7215 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 12.000 7.000 7.000
                    List price:
                    C$30.11 /each
                    Your price:
                    Qty
                    1928671 SPHX090304R20 SPHX090304R20 KC7140 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 12.000 7.000 7.000
                      List price:
                      C$29.23 /each
                      Your price:
                      Qty
                      1974209 SPHX090310R20 SPHX090310R20 KC7215 9.5250 .3750 3.5000 .1378 3.1800 .1252 1.0000 .0394 12.000 7.000 7.000
                        List price:
                        C$30.11 /each
                        Your price:
                        Qty
                        1928672 SPHX120404R20 SPHX120404R20 KC7140 12.7000 .5000 4.5000 .1772 4.7600 .1874 0.4000 .0156 12.000 7.000 7.000
                          List price:
                          C$31.39 /each
                          Your price:
                          Qty
                          List price:
                          Discount: %
                          Your price:
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          CTR Drilling Inserts
                          (44 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
                          2245846 SPHX060202R21 SPHX060202R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.2000 .0080 4.000 7.000 7.000
                            List price:
                            C$26.52 /each
                            Your price:
                            Qty
                            2245847 SPHX060206R21 SPHX060206R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.6000 .0236 4.000 7.000 7.000
                              List price:
                              C$26.52 /each
                              Your price:
                              Qty
                              2245848 SPHX060208R21 SPHX060208R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.8000 .0312 4.000 7.000 7.000
                                List price:
                                C$26.52 /each
                                Your price:
                                Qty
                                2245849 SPHX070306R21 SPHX070306R21 KC7215 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.6000 .0236 4.000 7.000 7.000
                                  List price:
                                  C$27.82 /each
                                  Your price:
                                  Qty
                                  2245851 SPHX070310R21 SPHX070310R21 KC7215 7.9370 .3125 2.8500 .1122 3.1800 .1252 1.0000 .0394 4.000 7.000 7.000
                                    List price:
                                    C$27.82 /each
                                    Your price:
                                    Qty
                                    1208830 SPHX150504R-21 SPHX150504R-21 KM1 15.8750 .6250 5.5000 .2165 5.9500 .2343 0.4000 .0156 4.000 7.000 7.000
                                      List price:
                                      C$31.62 /each
                                      Your price:
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price:
                                      Replacement This item is no longer available
                                      Replacement Product Please contact customer service for assistance
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      • Counter BoringCounter Boring
                                      • Shank - Cylindrical Whistle Notch™Shank - Cylindrical Whistle Notch™
                                      • Coolant - Through CoolantCoolant - Through Coolant
                                      • Flute Configuration: 2Flute Configuration: 2
                                      • Flute Configuration: 3Flute Configuration: 3
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth Gage Insert Number of Insert Cutting Diameter 1
                                      1246170 CBTF180R2WD20N3M CBTF180R2WD20N3M 18.1350 .7140 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.4000 .3307 86.0000 3.385 36.0000 1.417 13.5000 .5315 SPHX060204R.. 3
                                        List price:
                                        C$403.35 /each
                                        Your price:
                                        Qty
                                        1191074 CBTF200R2WD20N3M CBTF200R2WD20N3M 20.1650 .7940 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.5000 .3346 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX060204R.. 3
                                          List price:
                                          C$424.68 /each
                                          Your price:
                                          Qty
                                          1191075 CBTF220R2WD20N3M CBTF220R2WD20N3M 22.1650 .8730 -0.120000 -0.004 0.120000 .0047 20.0 .7874 10.5000 .4134 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX060204R.. 3
                                            List price:
                                            C$446.00 /each
                                            Your price:
                                            Qty
                                            1191076 CBTF260R2WD20N2M CBTF260R2WD20N2M 26.1650 1.030 -0.120000 -0.004 0.120000 .0047 20.0 .7874 13.0000 .5118 96.0000 3.779 46.0000 1.811 23.5000 .9252 SPHX090304R.. 2
                                              List price:
                                              C$424.58 /each
                                              Your price:
                                              Qty
                                              1246166 CBTF300R2WD20N3M CBTF300R2WD20N3M 30.1650 1.188 -0.120000 -0.004 0.120000 .0047 20.0 .7874 15.0000 .5906 101.0000 3.976 51.0000 2.007 23.0000 .9055 SPHX090304R.. 3
                                                List price:
                                                C$531.33 /each
                                                Your price:
                                                Qty
                                                1246168 CBTF420R2WD32N3M CBTF420R2WD32N3M 42.1950 1.661 -0.120000 -0.004 0.120000 .0047 32.0 1.259 22.0000 .8661 126.0000 4.960 66.0000 2.598 33.5000 1.318 SPHX120404R.. 3
                                                  List price:
                                                  C$659.32 /each
                                                  Your price:
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price:
                                                  Replacement This item is no longer available
                                                  Replacement Product Please contact customer service for assistance
                                                  Qty

                                                  Sold in pkg. of

                                                  ORIGINAL PRODUCT

                                                  CTR Drilling Inserts
                                                  (5 Products)
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major
                                                  1208764 SPHX060204R-22 SPHX060204R-22 KM1 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 25.000 7.000
                                                    List price:
                                                    C$25.25 /each
                                                    Your price:
                                                    Qty
                                                    1192535 SPHX070304R-22 SPHX070304R-22 KM1 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.4000 .0156 25.000 7.000
                                                      List price:
                                                      C$26.02 /each
                                                      Your price:
                                                      Qty
                                                      1192539 SPHX090304R-22 SPHX090304R-22 KM1 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 25.000 7.000
                                                        List price:
                                                        C$26.46 /each
                                                        Your price:
                                                        Qty