Modular Drilling with Solid Carbide Performance

The KenTIP FS modular drill covers more applications and provides better performance than any other modular system, delivering substantial cost savings and process simplifications on your shop floor.

Carbide where it matters – KenTIP FS inserts cover the entire front part of the drill. The coupling is completely protected from chip flow and contact with the workpiece.

  • Straight fluted drills for static drilling applications
  • Straight fluted drills for combined drilling and countersinking applications

Features & Benefits

  • This modular drilling system covers a 6–26mm diameter range.
  • Up to 12xD drilling depths.
  • Applicable in steels, stainless steels, and cast iron.
  • Large, ultra-high polished chip flutes guarantee hassle-free chip evacuation, enhancing tool life and performance.
  • Taper interface uniquely designed for highest rigidity clamping.
  • Retention lock prevents insert pullout.
  • Large bearing surface positioned for transmission of highest torsional loads without pocket deformation.
  • Large face contact surface.
  • Coolant delivery to the drill point and to the rake for guaranteed coolant delivery where it is needed.

KenTIP FS Modular Drill Inserts

GTP Inserts

  • KenTIP FS GTP insert with the GOdrill™ point design.
  • GTP insert for universal applications
  • For steel, stainless steel and cast iron.
  • GOdrill geometry with 140° point angle.
  • Excellent centering capabilities and low axial forces.
  • Through coolant.

DAV Insert for Vibration Assisted Drilling of CFRP Stacks

  • For CFRP stacks with metal exit, non-ferrous materials, and high temperature alloys
  • Double angle geometry with 128º and 155º point angle to minimize exit burrs
  • Through coolant
  • Uncoated for cost-efficient drilling
  • Diamond coating for extended tool life optional

FEG Insert

  • FEG inserts with 180° point geometry for holes that require a flat bottom, performing two operations in one.
  • In conjunction with the other KenTIP™ FS inserts (HPG, HPC, HPL geometries), the FEG insert can be utilized as pilot drill point for deep-hole applications.
  • 180° point geometry for holes that require a flat bottom.
  • Corner chamfer to reduce burr formation.
  • Four margin lands for hole straightness and stability on inclined exits.

HPG Inserts

  • HPG-point geometry for steels.
  • Great positioning and centering capabilities for drilling without precentering, even in deeper holes.
  • KCP15A™ is an AlTiN PVD monolayer coating.
  • Enhanced thermal stability.

HPC Inserts

  • HPC-point geometry for all cast irons.
  • 4-margin lands ensure hole straightness.
  • Large corner radius prevents chipping and reduces exit burs when drilling through holes.
  • KC7410™ is an AlCr PVD multilayer coating.

SPF Insert for CFRP

  • Double angle geometry with 128° and 90° point angle to avoid delamination
  • Through coolant
  • Diamond coating for best tool life

HPL Inserts

  • HPL-point geometry for stainless steels.
  • Forms 2 chips per cutting edge for an uninterrupted and smooth chip flow.
  • KCMS15™ is an AlTiN PVD monolayer coating.
  • Prevents edge build-up, which delivers superior hole quality.
Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (901)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (901)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (901)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (901)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (901)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (901)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (901)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (901)
  • M Stainless Steel (782)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (782)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (782)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (721)
  • K Cast Iron (1029)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1029)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1029)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1029)
  • N Non-Ferrous Materials (177)
    • N1
      Wrought Aluminum (177)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (177)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (177)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (177)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
    • N6
      Carbon, Graphite Composites, CFRP (1)
    • N7
      MMC's (1)
  • S High-Temp Alloys (610)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (594)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (594)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (594)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (610)
  • C CFRP Materials (186)
    • C1
      CFRP, CFRP / CFRP (72)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (181)
    • C3
      CFRP / Titanium CFRP / High Temp (181)
    • C4
      CFRP / Stainless Steel (181)
Select First Choice
  • BR (15)
  • CN (166)
  • DE (238)
  • GB (129)
  • IN (21)
  • SG (73)
  • US (288)
Applications
Applications
  • Counterboring Counterboring (40)
  • Countersinking Countersinking (40)
  • Drilling Drilling (354)
  • Stacked Plates Drilling Stacked Plates Drilling (297)
Cutting Diameter
Cutting Diameter
  • 0.237 in (13)
  • 0.24 in (9)
  • 0.244 in (10)
  • 0.248 in (9)
  • 0.25 in (16)
  • 0.252 in (9)
  • 0.256 in (13)
  • 0.257 in (10)
  • 0.26 in (9)
  • 0.261 in (10)
  • 0.264 in (9)
  • 0.266 in (11)
  • 0.268 in (14)
  • 0.272 in (10)
  • 0.276 in (13)
  • 0.28 in (9)
  • 0.281 in (10)
  • 0.284 in (9)
  • 0.288 in (9)
  • 0.29 in (9)
  • 0.291 in (9)
  • 0.295 in (13)
  • 0.297 in (9)
  • 0.299 in (10)
  • 0.303 in (9)
  • 0.307 in (10)
  • 0.311 in (9)
  • 0.313 in (17)
  • 0.315 in (22)
  • 0.319 in (20)
  • 0.322 in (17)
  • 0.323 in (20)
  • 0.327 in (18)
  • 0.328 in (19)
  • 0.331 in (18)
  • 0.332 in (17)
  • 0.335 in (22)
  • 0.336 in (17)
  • 0.339 in (21)
  • 0.343 in (20)
  • 0.345 in (19)
  • 0.347 in (19)
  • 0.349 in (17)
  • 0.351 in (19)
  • 0.354 in (22)
  • 0.358 in (20)
  • 0.359 in (17)
  • 0.362 in (18)
  • 0.366 in (18)
  • 0.368 in (18)
  • 0.37 in (19)
  • 0.374 in (21)
  • 0.375 in (24)
  • 0.376 in (19)
  • 0.378 in (20)
  • 0.382 in (20)
  • 0.386 in (20)
  • 0.39 in (19)
  • 0.391 in (19)
  • 0.394 in (23)
  • 0.395 in (18)
  • 0.397 in (18)
  • 0.398 in (20)
  • 0.402 in (22)
  • 0.404 in (18)
  • 0.406 in (21)
  • 0.408 in (21)
  • 0.41 in (20)
  • 0.414 in (39)
  • 0.417 in (20)
  • 0.421 in (20)
  • 0.422 in (19)
  • 0.425 in (21)
  • 0.429 in (19)
  • 0.433 in (21)
  • 0.437 in (22)
  • 0.438 in (23)
  • 0.441 in (19)
  • 0.445 in (18)
  • 0.449 in (18)
  • 0.453 in (24)
  • 0.457 in (19)
  • 0.461 in (18)
  • 0.465 in (21)
  • 0.47 in (22)
  • 0.473 in (22)
  • 0.477 in (19)
  • 0.48 in (20)
  • 0.484 in (22)
  • 0.488 in (19)
  • 0.491 in (19)
  • 0.492 in (21)
  • 0.496 in (18)
  • 0.5 in (25)
  • 0.504 in (19)
  • 0.508 in (19)
  • 0.512 in (21)
  • 0.516 in (20)
  • 0.52 in (20)
  • 0.523 in (17)
  • 0.524 in (19)
  • 0.527 in (17)
  • 0.528 in (18)
  • 0.531 in (41)
  • 0.535 in (19)
  • 0.539 in (18)
  • 0.543 in (20)
  • 0.547 in (22)
  • 0.549 in (18)
  • 0.551 in (22)
  • 0.555 in (21)
  • 0.559 in (20)
  • 0.564 in (25)
  • 0.568 in (20)
  • 0.572 in (21)
  • 0.576 in (19)
  • 0.578 in (21)
  • 0.579 in (17)
  • 0.583 in (20)
  • 0.587 in (17)
  • 0.591 in (22)
  • 0.594 in (20)
  • 0.595 in (21)
  • 0.598 in (21)
  • 0.602 in (21)
  • 0.605 in (18)
  • 0.606 in (18)
  • 0.609 in (19)
  • 0.61 in (22)
  • 0.614 in (20)
  • 0.618 in (19)
  • 0.622 in (20)
  • 0.625 in (22)
  • 0.626 in (18)
  • 0.63 in (21)
  • 0.631 in (17)
  • 0.633 in (17)
  • 0.634 in (23)
  • 0.636 in (17)
  • 0.638 in (19)
  • 0.641 in (19)
  • 0.642 in (19)
  • 0.646 in (18)
  • 0.65 in (21)
  • 0.652 in (17)
  • 0.654 in (19)
  • 0.656 in (21)
  • 0.657 in (18)
  • 0.661 in (18)
  • 0.665 in (18)
  • 0.669 in (21)
  • 0.672 in (19)
  • 0.673 in (19)
  • 0.677 in (19)
  • 0.681 in (19)
  • 0.685 in (18)
  • 0.687 in (20)
  • 0.689 in (19)
  • 0.69 in (21)
  • 0.692 in (16)
  • 0.694 in (19)
  • 0.698 in (21)
  • 0.702 in (19)
  • 0.704 in (18)
  • 0.705 in (18)
  • 0.709 in (21)
  • 0.713 in (19)
  • 0.717 in (17)
  • 0.719 in (20)
  • 0.72 in (18)
  • 0.724 in (18)
  • 0.728 in (21)
  • 0.732 in (19)
  • 0.734 in (18)
  • 0.736 in (19)
  • 0.74 in (18)
  • 0.744 in (18)
  • 0.748 in (19)
  • 0.75 in (19)
  • 0.752 in (16)
  • 0.756 in (18)
  • 0.757 in (16)
  • 0.758 in (17)
  • 0.759 in (18)
  • 0.76 in (16)
  • 0.762 in (16)
  • 0.764 in (15)
  • 0.766 in (18)
  • 0.768 in (19)
  • 0.772 in (15)
  • 0.776 in (16)
  • 0.78 in (17)
  • 0.781 in (18)
  • 0.784 in (16)
  • 0.787 in (13)
  • 0.791 in (10)
  • 0.795 in (10)
  • 0.797 in (10)
  • 0.799 in (10)
  • 0.807 in (13)
  • 0.811 in (10)
  • 0.814 in (13)
  • 0.816 in (9)
  • 0.82 in (9)
  • 0.824 in (9)
  • 0.828 in (22)
  • 0.832 in (10)
  • 0.833 in (9)
  • 0.835 in (10)
  • 0.839 in (9)
  • 0.843 in (9)
  • 0.844 in (10)
  • 0.846 in (13)
  • 0.854 in (9)
  • 0.858 in (10)
  • 0.859 in (9)
  • 0.862 in (9)
  • 0.866 in (13)
  • 0.87 in (9)
  • 0.874 in (10)
  • 0.875 in (13)
  • 0.882 in (9)
  • 0.884 in (9)
  • 0.886 in (13)
  • 0.89 in (9)
  • 0.894 in (9)
  • 0.898 in (10)
  • 0.902 in (9)
  • 0.906 in (13)
  • 0.909 in (9)
  • 0.913 in (10)
  • 0.917 in (9)
  • 0.921 in (9)
  • 0.922 in (10)
  • 0.925 in (13)
  • 0.929 in (9)
  • 0.933 in (9)
  • 0.937 in (13)
  • 0.942 in (9)
  • 0.946 in (13)
  • 0.95 in (9)
  • 0.954 in (9)
  • 0.958 in (9)
  • 0.961 in (9)
  • 0.965 in (13)
  • 0.969 in (11)
  • 0.972 in (10)
  • 0.976 in (9)
  • 0.98 in (9)
  • 0.984 in (13)
  • 0.987 in (9)
  • 0.988 in (9)
  • 0.992 in (9)
  • 0.994 in (9)
  • 0.996 in (9)
  • 1.0 in (13)
  • 1.004 in (12)
  • 1.006 in (9)
  • 1.008 in (10)
  • 1.01 in (9)
  • 1.012 in (13)
  • 1.016 in (11)
  • 1.02 in (9)
  • 1.024 in (13)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.0 mm (13)
  • 6.101 mm (9)
  • 6.2 mm (10)
  • 6.301 mm (9)
  • 6.351 mm (16)
  • 6.4 mm (9)
  • 6.5 mm (13)
  • 6.525 mm (10)
  • 6.601 mm (9)
  • 6.625 mm (10)
  • 6.7 mm (9)
  • 6.75 mm (11)
  • 6.801 mm (14)
  • 6.9 mm (10)
  • 7.0 mm (13)
  • 7.101 mm (9)
  • 7.15 mm (10)
  • 7.2 mm (9)
  • 7.301 mm (9)
  • 7.375 mm (9)
  • 7.4 mm (9)
  • 7.5 mm (13)
  • 7.551 mm (9)
  • 7.601 mm (10)
  • 7.7 mm (9)
  • 7.801 mm (10)
  • 7.9 mm (9)
  • 7.95 mm (17)
  • 8.0 mm (22)
  • 8.1 mm (20)
  • 8.175 mm (17)
  • 8.201 mm (20)
  • 8.3 mm (18)
  • 8.326 mm (19)
  • 8.4 mm (18)
  • 8.425 mm (17)
  • 8.5 mm (22)
  • 8.525 mm (17)
  • 8.6 mm (21)
  • 8.701 mm (20)
  • 8.725 mm (19)
  • 8.8 mm (19)
  • 8.85 mm (17)
  • 8.9 mm (19)
  • 9.0 mm (22)
  • 9.1 mm (20)
  • 9.125 mm (17)
  • 9.201 mm (18)
  • 9.3 mm (18)
  • 9.35 mm (18)
  • 9.4 mm (19)
  • 9.5 mm (21)
  • 9.525 mm (24)
  • 9.55 mm (19)
  • 9.601 mm (20)
  • 9.701 mm (20)
  • 9.8 mm (20)
  • 9.9 mm (19)
  • 9.925 mm (19)
  • 10.0 mm (23)
  • 10.025 mm (18)
  • 10.076 mm (18)
  • 10.101 mm (20)
  • 10.201 mm (22)
  • 10.25 mm (18)
  • 10.3 mm (21)
  • 10.326 mm (21)
  • 10.4 mm (20)
  • 10.5 mm (39)
  • 10.601 mm (20)
  • 10.701 mm (20)
  • 10.726 mm (19)
  • 10.8 mm (21)
  • 10.9 mm (19)
  • 11.0 mm (21)
  • 11.101 mm (22)
  • 11.125 mm (23)
  • 11.201 mm (19)
  • 11.3 mm (18)
  • 11.4 mm (18)
  • 11.5 mm (24)
  • 11.601 mm (19)
  • 11.701 mm (18)
  • 11.8 mm (21)
  • 11.9 mm (22)
  • 12.0 mm (22)
  • 12.101 mm (19)
  • 12.201 mm (20)
  • 12.3 mm (22)
  • 12.4 mm (19)
  • 12.476 mm (19)
  • 12.5 mm (21)
  • 12.601 mm (18)
  • 12.701 mm (25)
  • 12.8 mm (19)
  • 12.9 mm (19)
  • 13.0 mm (21)
  • 13.101 mm (20)
  • 13.201 mm (20)
  • 13.275 mm (17)
  • 13.3 mm (19)
  • 13.375 mm (17)
  • 13.4 mm (18)
  • 13.5 mm (41)
  • 13.601 mm (19)
  • 13.701 mm (18)
  • 13.8 mm (20)
  • 13.9 mm (22)
  • 13.951 mm (18)
  • 14.0 mm (22)
  • 14.101 mm (21)
  • 14.201 mm (20)
  • 14.3 mm (25)
  • 14.4 mm (20)
  • 14.5 mm (21)
  • 14.601 mm (19)
  • 14.675 mm (21)
  • 14.701 mm (17)
  • 14.8 mm (20)
  • 14.9 mm (17)
  • 15.0 mm (22)
  • 15.076 mm (20)
  • 15.101 mm (21)
  • 15.201 mm (21)
  • 15.3 mm (21)
  • 15.375 mm (18)
  • 15.4 mm (18)
  • 15.476 mm (19)
  • 15.5 mm (22)
  • 15.601 mm (20)
  • 15.701 mm (19)
  • 15.8 mm (20)
  • 15.875 mm (22)
  • 15.9 mm (18)
  • 16.0 mm (21)
  • 16.026 mm (17)
  • 16.075 mm (17)
  • 16.1 mm (23)
  • 16.151 mm (17)
  • 16.2 mm (19)
  • 16.276 mm (19)
  • 16.3 mm (19)
  • 16.401 mm (18)
  • 16.5 mm (21)