KSEM™ Modular Drill for the Intermediate Diameter Range

The KSEM modular drill covers drilling applications in a diameter range of 12,5-40mm (.4921 – 1.5748”) up to 10 x D. KSEM enables maximum feed rates for highest productivity.

With four large contact surfaces, the insert pocket seat provides maximum stability, even in challenging conditions like stacked plates, cross holes, and inclined exits.

The central locking screw mechanism ensures secure clamping of the insert, resulting in process safety and long tool life for both the drill body and the insert. Material specific point geometries provide versatility in a wide range of materials.

The KSEM carbide inserts can be reconditioned, further extending the tool life, reducing tool inventory and tool cost. 

Browse KSEM Products

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1343)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1343)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1343)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1343)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1343)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1260)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1260)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1231)
  • M Stainless Steel (996)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (996)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (996)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (996)
  • K Cast Iron (1035)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1035)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1035)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1035)
  • N Non-Ferrous Materials (879)
    • N1
      Wrought Aluminum (879)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (879)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (879)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (879)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (796)
    • N6
      Carbon, Graphite Composites, CFRP (796)
    • N7
      MMC's (796)
  • S High-Temp Alloys (879)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (879)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (879)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (879)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (879)
  • H Hardened Materials (29)
    • H1
      Hardened Materials 44-48 HRC (29)
    • H2
      Hardened Materials 48-55 HRC (29)
    • H3
      Hardened Materials 56-60 HRC (29)
    • H4
      Hardened Materials >60 HRC (29)
Select First Choice
  • BR (111)
  • CN (265)
  • DE (245)
  • GB (200)
  • IN (189)
  • SG (161)
  • US (257)
Applications
Applications
  • Countersinking Countersinking (42)
  • Drilling Drilling (595)
  • Inclined Entry Drilling Inclined Entry Drilling (549)
  • Inclined Exit Drilling Inclined Exit Drilling (549)
  • Stacked Plates Drilling Stacked Plates Drilling (549)
Cutting Diameter
Cutting Diameter
  • 0.492 in (15)
  • 0.496 in (8)
  • 0.5 in (21)
  • 0.504 in (19)
  • 0.509 in (24)
  • 0.512 in (17)
  • 0.516 in (9)
  • 0.52 in (11)
  • 0.531 in (18)
  • 0.535 in (10)
  • 0.539 in (9)
  • 0.543 in (11)
  • 0.547 in (10)
  • 0.551 in (18)
  • 0.555 in (9)
  • 0.557 in (5)
  • 0.559 in (7)
  • 0.564 in (11)
  • 0.568 in (12)
  • 0.572 in (12)
  • 0.576 in (10)
  • 0.578 in (12)
  • 0.583 in (17)
  • 0.591 in (24)
  • 0.594 in (9)
  • 0.602 in (12)
  • 0.609 in (18)
  • 0.61 in (12)
  • 0.614 in (8)
  • 0.618 in (6)
  • 0.622 in (8)
  • 0.625 in (14)
  • 0.63 in (22)
  • 0.632 in (7)
  • 0.634 in (12)
  • 0.636 in (13)
  • 0.638 in (17)
  • 0.641 in (17)
  • 0.65 in (12)
  • 0.654 in (5)
  • 0.656 in (14)
  • 0.669 in (22)
  • 0.672 in (12)
  • 0.683 in (8)
  • 0.687 in (13)
  • 0.69 in (12)
  • 0.694 in (5)
  • 0.698 in (5)
  • 0.7 in (5)
  • 0.702 in (5)
  • 0.704 in (11)
  • 0.705 in (7)
  • 0.709 in (12)
  • 0.719 in (14)
  • 0.72 in (10)
  • 0.724 in (9)
  • 0.728 in (12)
  • 0.732 in (6)
  • 0.734 in (11)
  • 0.74 in (8)
  • 0.744 in (8)
  • 0.748 in (34)
  • 0.75 in (25)
  • 0.756 in (20)
  • 0.757 in (22)
  • 0.758 in (22)
  • 0.759 in (23)
  • 0.761 in (24)
  • 0.762 in (25)
  • 0.763 in (23)
  • 0.766 in (28)
  • 0.768 in (12)
  • 0.774 in (5)
  • 0.776 in (5)
  • 0.781 in (11)
  • 0.787 in (18)
  • 0.788 in (7)
  • 0.791 in (8)
  • 0.797 in (13)
  • 0.801 in (11)
  • 0.807 in (12)
  • 0.814 in (15)
  • 0.816 in (12)
  • 0.828 in (16)
  • 0.832 in (5)
  • 0.833 in (5)
  • 0.835 in (5)
  • 0.84 in (6)
  • 0.844 in (8)
  • 0.846 in (12)
  • 0.854 in (5)
  • 0.859 in (11)
  • 0.866 in (12)
  • 0.87 in (7)
  • 0.872 in (6)
  • 0.875 in (24)
  • 0.884 in (23)
  • 0.886 in (12)
  • 0.891 in (5)
  • 0.897 in (5)
  • 0.906 in (20)
  • 0.907 in (10)
  • 0.909 in (10)
  • 0.915 in (10)
  • 0.917 in (10)
  • 0.922 in (17)
  • 0.925 in (12)
  • 0.929 in (4)
  • 0.933 in (6)
  • 0.937 in (10)
  • 0.946 in (12)
  • 0.958 in (5)
  • 0.965 in (13)
  • 0.969 in (16)
  • 0.972 in (12)
  • 0.984 in (36)
  • 0.987 in (12)
  • 0.994 in (12)
  • 0.996 in (12)
  • 1.0 in (31)
  • 1.004 in (36)
  • 1.006 in (17)
  • 1.008 in (5)
  • 1.01 in (4)
  • 1.012 in (6)
  • 1.014 in (7)
  • 1.016 in (9)
  • 1.024 in (12)
  • 1.032 in (14)
  • 1.035 in (11)
  • 1.043 in (12)
  • 1.044 in (5)
  • 1.047 in (7)
  • 1.051 in (9)
  • 1.063 in (19)
  • 1.083 in (11)
  • 1.094 in (8)
  • 1.102 in (12)
  • 1.106 in (6)
  • 1.109 in (12)
  • 1.116 in (9)
  • 1.122 in (15)
  • 1.125 in (17)
  • 1.143 in (17)
  • 1.156 in (14)
  • 1.161 in (12)
  • 1.163 in (4)
  • 1.17 in (5)
  • 1.172 in (10)
  • 1.181 in (12)
  • 1.187 in (10)
  • 1.201 in (13)
  • 1.203 in (6)
  • 1.219 in (12)
  • 1.22 in (12)
  • 1.226 in (5)
  • 1.23 in (4)
  • 1.24 in (8)
  • 1.25 in (24)
  • 1.26 in (12)
  • 1.268 in (7)
  • 1.274 in (7)
  • 1.28 in (6)
  • 1.282 in (8)
  • 1.297 in (8)
  • 1.299 in (15)
  • 1.313 in (9)
  • 1.315 in (9)
  • 1.319 in (2)
  • 1.328 in (3)
  • 1.339 in (15)
  • 1.344 in (8)
  • 1.358 in (3)
  • 1.375 in (8)
  • 1.379 in (12)
  • 1.399 in (3)
  • 1.407 in (6)
  • 1.417 in (12)
  • 1.422 in (11)
  • 1.437 in (5)
  • 1.457 in (13)
  • 1.469 in (7)
  • 1.476 in (6)
  • 1.496 in (20)
  • 1.5 in (12)
  • 1.514 in (15)
  • 1.516 in (3)
  • 1.536 in (12)
  • 1.543 in (5)
  • 1.555 in (3)
  • 1.565 in (1)
  • 1.575 in (11)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (15)
  • 12.601 mm (8)
  • 12.701 mm (21)
  • 12.8 mm (19)
  • 12.925 mm (24)
  • 13.0 mm (17)
  • 13.101 mm (9)
  • 13.201 mm (11)
  • 13.5 mm (18)
  • 13.601 mm (10)
  • 13.701 mm (9)
  • 13.8 mm (11)
  • 13.9 mm (10)
  • 14.0 mm (18)
  • 14.101 mm (9)
  • 14.15 mm (5)
  • 14.201 mm (7)
  • 14.3 mm (11)
  • 14.4 mm (12)
  • 14.5 mm (12)
  • 14.601 mm (10)
  • 14.675 mm (12)
  • 14.8 mm (17)
  • 15.0 mm (24)
  • 15.076 mm (9)
  • 15.3 mm (12)
  • 15.476 mm (18)
  • 15.5 mm (12)
  • 15.601 mm (8)
  • 15.701 mm (6)
  • 15.8 mm (8)
  • 15.875 mm (14)
  • 16.0 mm (22)
  • 16.05 mm (7)
  • 16.1 mm (12)
  • 16.151 mm (13)
  • 16.2 mm (17)
  • 16.276 mm (17)
  • 16.5 mm (12)
  • 16.6 mm (5)
  • 16.675 mm (14)
  • 17.0 mm (22)
  • 17.075 mm (12)
  • 17.35 mm (8)
  • 17.45 mm (13)
  • 17.5 mm (12)
  • 17.6 mm (5)
  • 17.7 mm (5)
  • 17.75 mm (5)
  • 17.8 mm (5)
  • 17.85 mm (11)
  • 17.901 mm (7)
  • 18.0 mm (12)
  • 18.25 mm (14)
  • 18.3 mm (10)
  • 18.401 mm (9)
  • 18.5 mm (12)
  • 18.6 mm (6)
  • 18.651 mm (11)
  • 18.8 mm (8)
  • 18.901 mm (8)
  • 19.0 mm (34)
  • 19.05 mm (25)
  • 19.201 mm (20)
  • 19.225 mm (22)
  • 19.25 mm (22)
  • 19.276 mm (23)
  • 19.326 mm (24)
  • 19.35 mm (25)
  • 19.375 mm (23)
  • 19.451 mm (28)
  • 19.5 mm (12)
  • 19.651 mm (5)
  • 19.701 mm (5)
  • 19.85 mm (11)
  • 20.0 mm (18)
  • 20.026 mm (7)
  • 20.1 mm (8)
  • 20.25 mm (13)
  • 20.35 mm (11)
  • 20.5 mm (12)
  • 20.651 mm (15)
  • 20.701 mm (12)
  • 21.0 mm (16)
  • 21.1 mm (5)
  • 21.151 mm (5)
  • 21.201 mm (5)
  • 21.326 mm (6)
  • 21.425 mm (8)
  • 21.5 mm (12)
  • 21.701 mm (5)
  • 21.826 mm (11)
  • 22.0 mm (12)
  • 22.1 mm (7)
  • 22.151 mm (6)
  • 22.225 mm (24)
  • 22.451 mm (23)
  • 22.5 mm (12)
  • 22.625 mm (5)
  • 22.776 mm (5)
  • 23.0 mm (20)
  • 23.05 mm (10)
  • 23.1 mm (10)
  • 23.25 mm (10)
  • 23.3 mm (10)
  • 23.425 mm (17)
  • 23.5 mm (12)
  • 23.6 mm (4)
  • 23.701 mm (6)
  • 23.8 mm (10)
  • 24.0 mm (12)
  • 24.3 mm (5)
  • 24.5 mm (13)
  • 24.6 mm (16)
  • 24.701 mm (12)
  • 25.0 mm (36)
  • 25.076 mm (12)
  • 25.25 mm (12)
  • 25.3 mm (12)
  • 25.401 mm (31)
  • 25.5 mm (36)
  • 25.55 mm (17)
  • 25.6 mm (5)
  • 25.651 mm (4)
  • 25.675 mm (6)
  • 25.725 mm (6)
  • 25.75 mm (6)
  • 25.8 mm (9)
  • 26.0 mm (12)
  • 26.201 mm (14)
  • 26.3 mm (11)
  • 26.5 mm (12)
  • 26.526 mm (5)
  • 26.6 mm (7)
  • 26.701 mm (9)
  • 27.0 mm (19)
  • 27.5 mm (11)
  • 27.776 mm (8)
  • 28.0 mm (12)
  • 28.1 mm (6)
  • 28.175 mm (12)
  • 28.35 mm (9)
  • 28.5 mm (15)
  • 28.576 mm (17)
  • 29.0 mm (17)
  • 29.375 mm (14)
  • 29.5 mm (12)
  • 29.55 mm (4)
  • 29.725 mm (5)
  • 29.776 mm (10)
  • 30.0 mm (12)
  • 30.151 mm (10)
  • 30.5 mm (13)
  • 30.55 mm (6)
  • 30.951 mm (12)
  • 31.0 mm (12)
  • 31.151 mm (5)
  • 31.25 mm (4)
  • 31.5 mm (8)
  • 31.75 mm (24)
  • 32.0 mm (12)
  • 32.2 mm (7)
  • 32.35 mm (7)
  • 32.5 mm (6)
  • 32.551 mm (8)
  • 32.95 mm (8)
  • 33.0 mm (15)
  • 33.35 mm (9)
  • 33.4 mm (9)
  • 33.5 mm (2)
  • 33.725 mm (3)
  • 34.0 mm (15)
  • 34.125 mm (8)
  • 34.5 mm (3)
  • 34.926 mm (8)
  • 35.0 mm (12)
  • 35.5 mm (3)
  • 35.725 mm (6)
  • 36.0 mm (12)
  • 36.125 mm (11)
  • 36.5 mm (5)
  • 37.0 mm (13)
  • 37.301 mm (7)
  • 37.5 mm (6)
  • 38.0 mm (20)
  • 38.1 mm (12)
  • 38.45 mm (15)
  • 38.5 mm (3)
  • 39.0 mm (12)
  • 39.2 mm (5)
  • 39.5 mm (3)
  • 39.75 mm (1)
  • 40.0 mm (11)
Cutting Diameter Min to Cutting Diameter Max