successfully added to cart
View Cart

Notifications

Mark all as read

HP Drills • Steel • Stainless Steel • Cast Iron • Aluminum • High-Temperature Alloys

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Convex Drilling Convex Drilling (13)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (754)
  • Countersinking Countersinking (42)
  • Cross Hole Drilling Cross Hole Drilling (494)
  • Drilling Drilling (2189)
  • Inclined Exit Drilling Inclined Exit Drilling (479)
  • Stacked Plates Drilling Stacked Plates Drilling (2050)
Workpiece Material
  • P Steel (1835)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1835)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1835)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1835)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1835)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1835)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1808)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1808)
  • M Stainless Steel (459)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (459)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (459)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (459)
  • K Cast Iron (792)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (792)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (792)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (792)
  • N Non-Ferrous Materials (352)
    • N1
      Wrought Aluminum
      (352)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (352)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (352)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (352)
  • S High-Temp Alloys (459)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (459)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (459)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (459)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (459)
Cutting Diameter
  • 0.0 (1)
  • 2.5 (1)
  • 3.0 (14)
  • 3.048 (8)
  • 3.1 (12)
  • 3.175 (18)
  • 3.2 (14)
  • 3.2004 (2)
  • 3.2639 (3)
  • 3.264 (13)
  • 3.3 (14)
  • 3.4 (10)
  • 3.4544 (4)
  • 3.455 (14)
  • 3.5 (14)
  • 3.5001 (2)
  • 3.571 (11)
  • 3.5712 (1)
  • 3.6 (9)
  • 3.6576 (1)
  • 3.658 (4)
  • 3.7 (14)
  • 3.734 (6)
  • 3.7998 (2)
  • 3.8 (11)
  • 3.861 (1)
  • 3.9 (12)
  • 3.97 (20)
  • 4.0 (17)
  • 4.0386 (2)
  • 4.039 (8)
  • 4.0894 (1)
  • 4.0996 (2)
  • 4.1 (15)
  • 4.1554 (1)
  • 4.156 (1)
  • 4.2 (17)
  • 4.2012 (2)
  • 4.2164 (2)
  • 4.217 (3)
  • 4.3 (12)
  • 4.305 (3)
  • 4.3656 (5)
  • 4.366 (1)
  • 4.3663 (1)
  • 4.3993 (1)
  • 4.4 (9)
  • 4.496 (2)
  • 4.5 (15)
  • 4.5009 (2)
  • 4.572 (1)
  • 4.5796 (1)
  • 4.5999 (2)
  • 4.6 (12)
  • 4.6228 (1)
  • 4.623 (2)
  • 4.7 (15)
  • 4.7625 (8)
  • 4.763 (14)
  • 4.8 (15)
  • 4.8006 (2)
  • 4.8514 (1)
  • 4.852 (5)
  • 4.9 (14)
  • 5.0 (20)
  • 5.055 (2)
  • 5.1 (16)
  • 5.1003 (2)
  • 5.1054 (3)
  • 5.106 (14)
  • 5.1587 (4)
  • 5.159 (3)
  • 5.1594 (8)
  • 5.1994 (2)
  • 5.2 (15)
  • 5.26 (1)
  • 5.2603 (1)
  • 5.3 (13)
  • 5.4 (12)
  • 5.41 (11)
  • 5.4102 (4)
  • 5.4991 (2)
  • 5.5 (16)
  • 5.5575 (8)
  • 5.558 (14)
  • 5.6 (13)
  • 5.6159 (1)
  • 5.616 (1)
  • 5.7 (10)
  • 5.791 (7)
  • 5.7988 (1)
  • 5.8 (14)
  • 5.9 (8)
  • 5.9538 (2)
  • 5.954 (6)
  • 6.0 (18)
  • 6.1 (11)
  • 6.1011 (1)
  • 6.2 (14)
  • 6.2001 (2)
  • 6.3 (13)
  • 6.35 (22)
  • 6.4 (14)
  • 6.4999 (2)
  • 6.5 (16)
  • 6.5278 (6)
  • 6.528 (10)
  • 6.6 (13)
  • 6.6294 (1)
  • 6.63 (5)
  • 6.7 (13)
  • 6.7285 (1)
  • 6.746 (13)
  • 6.7462 (7)
  • 6.7996 (2)
  • 6.8 (18)
  • 6.9 (11)
  • 6.9088 (3)
  • 6.909 (3)
  • 7.0 (19)
  • 7.0358 (1)
  • 7.036 (1)
  • 7.1 (10)
  • 7.145 (21)
  • 7.2 (8)
  • 7.3 (10)
  • 7.4 (14)
  • 7.5 (13)
  • 7.5406 (8)
  • 7.541 (4)
  • 7.5413 (7)
  • 7.6 (8)
  • 7.7 (8)
  • 7.8 (14)
  • 7.9 (5)
  • 7.9375 (18)
  • 7.938 (5)
  • 8.0 (18)
  • 8.1 (11)
  • 8.2 (11)
  • 8.2042 (1)
  • 8.3 (4)
  • 8.3337 (8)
  • 8.334 (3)
  • 8.3344 (9)
  • 8.3998 (1)
  • 8.4 (9)
  • 8.4328 (3)
  • 8.433 (7)
  • 8.4988 (1)
  • 8.5 (18)
  • 8.6 (6)
  • 8.6106 (1)
  • 8.611 (1)
  • 8.7 (12)
  • 8.7325 (8)
  • 8.733 (13)
  • 8.8 (16)
  • 8.9 (7)
  • 9.0 (18)
  • 9.093 (1)
  • 9.1 (11)
  • 9.1288 (8)
  • 9.129 (11)
  • 9.2 (6)
  • 9.3 (9)
  • 9.347 (3)
  • 9.3472 (3)
  • 9.4 (10)
  • 9.5 (16)
  • 9.525 (21)
  • 9.6 (5)
  • 9.7 (7)
  • 9.7028 (1)
  • 9.8 (11)
  • 9.9 (7)
  • 9.921 (11)
  • 9.9212 (8)
  • 10.0 (18)
  • 10.1 (8)
  • 10.2 (18)
  • 10.3 (13)
  • 10.32 (21)
  • 10.4 (7)
  • 10.5 (18)
  • 10.5004 (2)
  • 10.6 (6)
  • 10.7 (6)
  • 10.7156 (9)
  • 10.716 (5)
  • 10.7163 (8)
  • 10.8 (13)
  • 11.0 (16)
  • 11.0261 (1)
  • 11.1 (8)
  • 11.1125 (8)
  • 11.113 (13)
  • 11.2 (9)
  • 11.3 (6)
  • 11.4 (6)
  • 11.5 (14)
  • 11.5087 (8)
  • 11.509 (1)
  • 11.5094 (9)
  • 11.6 (3)
  • 11.7 (5)
  • 11.8 (12)
  • 11.9 (4)
  • 11.9075 (7)
  • 11.908 (9)
  • 12.0 (20)
  • 12.1 (5)
  • 12.2 (6)
  • 12.3 (5)
  • 12.3038 (7)
  • 12.304 (9)
  • 12.4 (3)
  • 12.5 (18)
  • 12.6 (5)
  • 12.7 (22)
  • 12.8 (6)
  • 12.9 (4)
  • 13.0 (16)
  • 13.0785 (1)
  • 13.096 (5)
  • 13.0962 (3)
  • 13.1 (8)
  • 13.2 (1)
  • 13.3 (4)
  • 13.495 (4)
  • 13.5 (16)
  • 13.5001 (2)
  • 13.7 (4)
  • 13.8 (5)
  • 13.8906 (1)
  • 13.8913 (1)
  • 13.8963 (1)
  • 14.0 (20)
  • 14.1 (6)
  • 14.2 (6)
  • 14.2875 (8)
  • 14.288 (13)
  • 14.3 (4)
  • 14.4 (2)
  • 14.5 (14)
  • 14.6 (4)
  • 14.666 (1)
  • 14.684 (2)
  • 14.7 (4)
  • 14.8 (1)
  • 15.0 (15)
  • 15.1 (6)
  • 15.3 (6)
  • 15.4 (4)
  • 15.5 (11)
  • 15.6 (2)
  • 15.7 (4)
  • 15.8 (4)
  • 15.875 (18)
  • 16.0 (15)
  • 16.0782 (1)
  • 16.1 (2)
  • 16.129 (1)
  • 16.3 (1)
  • 16.5 (13)
  • 16.67 (8)
  • 16.9 (1)
  • 17.0 (14)
  • 17.4625 (4)
  • 17.463 (8)
  • 17.5 (14)
  • 17.7 (4)
  • 18.0 (14)
  • 18.5 (8)
  • 19.0 (11)
  • 19.05 (10)
  • 19.159 (1)
  • 19.3 (1)
  • 19.4462 (1)
  • 19.5 (5)
  • 20.0 (9)
  • 20.5 (2)
to
Cutting Diameter
  • 0.0984 (1)
  • 0.1181 (14)
  • 0.12 (8)
  • 0.122 (12)
  • 0.125 (18)
  • 0.126 (16)
  • 0.1285 (16)
  • 0.1299 (14)
  • 0.1339 (10)
  • 0.136 (18)
  • 0.1378 (16)
  • 0.1406 (12)
  • 0.1417 (9)
  • 0.144 (6)
  • 0.1457 (14)
  • 0.147 (6)
  • 0.1496 (13)
  • 0.152 (1)
  • 0.1535 (12)
  • 0.1563 (20)
  • 0.1575 (17)
  • 0.159 (10)
  • 0.161 (1)
  • 0.1614 (17)
  • 0.1636 (2)
  • 0.1654 (19)
  • 0.166 (5)
  • 0.1693 (12)
  • 0.1695 (3)
  • 0.1719 (7)
  • 0.1732 (10)
  • 0.177 (2)
  • 0.1772 (17)
  • 0.18 (1)
  • 0.1803 (1)
  • 0.1811 (14)
  • 0.182 (3)
  • 0.185 (15)
  • 0.1875 (22)
  • 0.189 (17)
  • 0.191 (6)
  • 0.1929 (14)
  • 0.1969 (20)
  • 0.199 (2)
  • 0.2008 (18)
  • 0.201 (17)
  • 0.2031 (15)
  • 0.2047 (17)
  • 0.2071 (2)
  • 0.2087 (13)
  • 0.2126 (12)
  • 0.213 (15)
  • 0.2165 (18)
  • 0.2188 (22)
  • 0.2205 (13)
  • 0.2211 (2)
  • 0.2244 (10)
  • 0.228 (7)
  • 0.2283 (15)
  • 0.2323 (8)
  • 0.2344 (8)
  • 0.2362 (18)
  • 0.2402 (12)
  • 0.2441 (16)
  • 0.248 (13)
  • 0.25 (22)
  • 0.252 (14)
  • 0.2559 (18)
  • 0.257 (16)
  • 0.2598 (13)
  • 0.261 (6)
  • 0.2638 (13)
  • 0.2649 (1)
  • 0.2656 (20)
  • 0.2677 (20)
  • 0.2717 (11)
  • 0.272 (6)
  • 0.2756 (19)
  • 0.277 (2)
  • 0.2795 (10)
  • 0.2813 (21)
  • 0.2835 (8)
  • 0.2874 (10)
  • 0.2913 (14)
  • 0.2953 (13)
  • 0.2969 (19)
  • 0.2992 (8)
  • 0.3031 (8)
  • 0.3071 (14)
  • 0.311 (5)
  • 0.3125 (23)
  • 0.315 (18)
  • 0.3189 (11)
  • 0.3228 (11)
  • 0.323 (1)
  • 0.3268 (4)
  • 0.3281 (20)
  • 0.3307 (10)
  • 0.332 (10)
  • 0.3346 (19)
  • 0.3386 (6)
  • 0.339 (2)
  • 0.3425 (12)
  • 0.3438 (21)
  • 0.3465 (16)
  • 0.3504 (7)
  • 0.3543 (18)
  • 0.358 (1)
  • 0.3583 (11)
  • 0.3594 (19)
  • 0.3622 (6)
  • 0.3661 (9)
  • 0.368 (6)
  • 0.3701 (10)
  • 0.374 (16)
  • 0.375 (21)
  • 0.378 (5)
  • 0.3819 (7)
  • 0.382 (1)
  • 0.3858 (11)
  • 0.3898 (7)
  • 0.3906 (19)
  • 0.3937 (18)
  • 0.3976 (8)
  • 0.4016 (18)
  • 0.4055 (13)
  • 0.4063 (21)
  • 0.4094 (7)
  • 0.4134 (20)
  • 0.4173 (6)
  • 0.4213 (6)
  • 0.4219 (22)
  • 0.4252 (13)
  • 0.4331 (16)
  • 0.4341 (1)
  • 0.437 (8)
  • 0.4375 (21)
  • 0.4409 (9)
  • 0.4449 (6)
  • 0.4488 (6)
  • 0.4528 (14)
  • 0.4531 (18)
  • 0.4567 (3)
  • 0.4606 (5)
  • 0.4646 (12)
  • 0.4685 (4)
  • 0.4688 (16)
  • 0.4724 (20)
  • 0.4764 (5)
  • 0.4803 (6)
  • 0.4843 (5)
  • 0.4844 (16)
  • 0.4882 (3)
  • 0.4921 (18)
  • 0.4961 (5)
  • 0.5 (22)
  • 0.5039 (6)
  • 0.5079 (4)
  • 0.5118 (16)
  • 0.5149 (1)
  • 0.5156 (8)
  • 0.5157 (8)
  • 0.5197 (1)
  • 0.5236 (4)
  • 0.5313 (4)
  • 0.5315 (18)
  • 0.5394 (4)
  • 0.5433 (5)
  • 0.5469 (2)
  • 0.5471 (1)
  • 0.5512 (20)
  • 0.5551 (6)
  • 0.5591 (6)
  • 0.5625 (21)
  • 0.563 (4)
  • 0.5669 (2)
  • 0.5709 (14)
  • 0.5748 (4)
  • 0.5774 (1)
  • 0.5781 (2)
  • 0.5787 (4)
  • 0.5827 (1)
  • 0.5906 (15)
  • 0.5945 (6)
  • 0.6024 (6)
  • 0.6063 (4)
  • 0.6102 (11)
  • 0.6142 (2)
  • 0.6181 (4)
  • 0.622 (4)
  • 0.625 (18)
  • 0.6299 (15)
  • 0.633 (1)
  • 0.6339 (2)
  • 0.635 (1)
  • 0.6417 (1)
  • 0.6496 (13)
  • 0.6563 (8)
  • 0.6654 (1)
  • 0.6693 (14)
  • 0.6875 (12)
  • 0.689 (14)
  • 0.6969 (4)
  • 0.7087 (14)
  • 0.7283 (8)
  • 0.748 (11)
  • 0.75 (10)
  • 0.7543 (1)
  • 0.7598 (1)
  • 0.7656 (1)
  • 0.7677 (5)
  • 0.7874 (9)
  • 0.8071 (2)
to
Maximum Hole Depth [L4]
  • 0.4134 (1)
  • 0.4331 (1)
  • 0.5197 (1)
  • 0.5512 (61)
  • 0.5906 (1)
  • 0.622 (1)