Suggestions

Product Suggestions

Product Categories

Resources

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

GOtap

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (781)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (781)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (781)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (738)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (738)
  • M Stainless Steel (792)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (792)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (749)
  • K Cast Iron (753)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (753)
  • N Non-Ferrous Materials (128)
    • N1
      Wrought Aluminum
      (113)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (128)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (113)
Select First Choice
  • BR (16)
  • CN (100)
  • DE (92)
  • GB (45)
  • IN (3)
  • SG (28)
  • US (267)
Applications
Applications
  • Pipe Thread Pipe Thread (43)
  • Tapping Blind Hole Tapping Blind Hole (468)
  • Tapping Through Hole Tapping Through Hole (341)
  • Threading Threading (809)
Cutting Length
Cutting Length
  • 5.0 mm (4)
  • 7.0 mm (20)
  • 8.0 mm (18)
  • 8.2 mm (1)
  • 9.0 mm (4)
  • 9.1 mm (1)
  • 9.5 mm (1)
  • 9.7 mm (47)
  • 9.9 mm (8)
  • 10.0 mm (20)
  • 10.1 mm (1)
  • 11.0 mm (9)
  • 11.5 mm (2)
  • 11.7 mm (1)
  • 12.0 mm (20)
  • 12.1 mm (1)
  • 12.2 mm (3)
  • 12.5 mm (3)
  • 12.7 mm (42)
  • 13.0 mm (35)
  • 13.2 mm (5)
  • 13.4 mm (1)
  • 14.2 mm (2)
  • 14.8 mm (10)
  • 14.9 mm (2)
  • 15.0 mm (58)
  • 15.8 mm (2)
  • 16.0 mm (42)
  • 17.0 mm (5)
  • 17.3 mm (3)
  • 17.48 mm (3)
  • 17.5 mm (42)
  • 18.0 mm (27)
  • 18.7 mm (3)
  • 18.9 mm (2)
  • 19.0 mm (7)
  • 19.05 mm (8)
  • 19.1 mm (34)
  • 20.0 mm (17)
  • 21.0 mm (21)
  • 22.0 mm (8)
  • 22.3 mm (8)
  • 22.4 mm (14)
  • 23.0 mm (4)
  • 23.9 mm (40)
  • 24.0 mm (23)
  • 25.0 mm (21)
  • 25.4 mm (17)
  • 26.19 mm (8)
  • 27.7 mm (41)
  • 28.0 mm (1)
  • 29.0 mm (1)
  • 30.0 mm (18)
  • 31.0 mm (14)
  • 33.0 mm (1)
  • 34.0 mm (5)
  • 34.93 mm (7)
  • 35.0 mm (7)
  • 36.0 mm (4)
  • 38.0 mm (1)
  • 38.1 mm (6)
  • 40.0 mm (8)
  • 42.0 mm (4)
  • 43.5 mm (4)
  • 44.45 mm (2)
  • 48.0 mm (2)
  • 50.0 mm (4)
  • 55.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.2 in (4)
  • 0.28 in (20)
  • 0.31 in (18)
  • 0.32 in (1)
  • 0.35 in (4)
  • 0.36 in (1)
  • 0.37 in (1)
  • 0.38 in (47)
  • 0.39 in (29)
  • 0.43 in (9)
  • 0.45 in (2)
  • 0.46 in (1)
  • 0.47 in (20)
  • 0.48 in (4)
  • 0.49 in (3)
  • 0.5 in (42)
  • 0.51 in (35)
  • 0.52 in (5)
  • 0.53 in (1)
  • 0.56 in (2)
  • 0.58 in (10)
  • 0.59 in (59)
  • 0.6 in (1)
  • 0.62 in (2)
  • 0.63 in (42)
  • 0.67 in (5)
  • 0.68 in (3)
  • 0.688 in (3)
  • 0.69 in (42)
  • 0.71 in (27)
  • 0.74 in (5)
  • 0.75 in (49)
  • 0.79 in (17)
  • 0.83 in (21)
  • 0.866 in (1)
  • 0.87 in (7)
  • 0.88 in (22)
  • 0.91 in (4)
  • 0.94 in (62)
  • 0.98 in (21)
  • 0.994 in (1)
  • 1.0 in (17)
  • 1.031 in (8)
  • 1.09 in (41)
  • 1.1 in (1)
  • 1.14 in (1)
  • 1.18 in (18)
  • 1.22 in (14)
  • 1.3 in (1)
  • 1.34 in (5)
  • 1.375 in (7)
  • 1.38 in (7)
  • 1.42 in (4)
  • 1.5 in (7)
  • 1.57 in (8)
  • 1.65 in (4)
  • 1.71 in (4)
  • 1.75 in (2)
  • 1.89 in (2)
  • 1.97 in (4)
  • 2.17 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • G Internal Thread Parallel (15)
  • M-Metric/ISO (334)
  • National Pipe Thread (16)
  • National Pipe Thread Fuel (12)
  • UNC (245)
  • UNF (169)
  • UNJ (18)
Thread Size
Thread Size
  • 1 - 11 (2)
  • 1 - 11 1/2 (2)
  • 1 - 12 (3)
  • 1 - 8 (7)
  • 1 1/2 - 12 (1)
  • 1 1/2 - 6 (2)
  • 1 1/4 - 12 (1)
  • 1 1/4 - 7 (3)
  • 1 1/8 - 12 (2)
  • 1 1/8 - 7 (4)
  • 1 3/4 - 5 (1)
  • 1 3/8 - 12 (1)
  • 1 3/8 - 6 (1)
  • 1/16 - 27 (3)
  • 1/2 - 13 (18)
  • 1/2 - 14 (6)
  • 1/2 - 20 (17)
  • 1/4 - 18 (4)
  • 1/4 - 19 (2)
  • 1/4 - 20 (23)
  • 1/4 - 28 (23)
  • 1/8 - 27 (8)
  • 1/8 - 28 (3)
  • 10 - 24 (19)
  • 10 - 32 (24)
  • 12 - 24 (2)
  • 12 - 28 (3)
  • 2 - 4 1/2 (1)
  • 2 - 56 (4)
  • 3 - 48 (2)
  • 3/4 - 10 (10)
  • 3/4 - 14 (5)
  • 3/4 - 16 (9)
  • 3/8 - 16 (20)
  • 3/8 - 18 (4)
  • 3/8 - 19 (2)
  • 3/8 - 24 (20)
  • 4 - 40 (22)
  • 4 - 48 (3)
  • 5 - 40 (3)
  • 5/16 - 18 (20)
  • 5/16 - 24 (20)
  • 5/8 - 11 (16)
  • 5/8 - 14 (1)
  • 5/8 - 18 (16)
  • 6 - 32 (23)
  • 6 - 40 (6)
  • 7/16 - 14 (11)
  • 7/16 - 20 (18)
  • 7/8 - 14 (4)
  • 7/8 - 9 (5)
  • 8 - 32 (27)
  • 8 - 36 (2)
  • 9/16 - 12 (8)
  • 9/16 - 18 (8)
  • M10 X 0,75 (2)
  • M10 X 1 (3)
  • M10 X 1,25 (7)
  • M10 X 1,5 (21)
  • M10 X 1,50 (3)
  • M12 X 1 (3)
  • M12 X 1,25 (7)
  • M12 X 1,5 (6)
  • M12 X 1,75 (19)
  • M14 X 1 (3)
  • M14 X 1,25 (3)
  • M14 X 1,5 (7)
  • M14 X 2 (12)
  • M16 X 1,5 (9)
  • M16 X 2 (13)
  • M16 X 2,0 (3)
  • M18 X 1,5 (6)
  • M18 X 2 (3)
  • M18 X 2,5 (7)
  • M2 X 0,4 (7)
  • M2,5 X 0,45 (4)
  • M20 X 1,5 (3)
  • M20 X 2 (3)
  • M20 X 2,5 (8)
  • M22 X 1,5 (3)
  • M22 X 2 (3)
  • M22 X 2,5 (4)
  • M24 X 1,5 (3)
  • M24 X 2 (2)
  • M24 X 3 (4)
  • M27 X 3 (3)
  • M3 X 0,5 (18)
  • M3,5 X 0,6 (4)
  • M30 X 1,5 (2)
  • M30 X 3,5 (4)
  • M33 X 3,5 (3)
  • M36 X 4 (4)
  • M4 X 0,7 (17)
  • M42 X 4,5 (2)
  • M5 X 0,8 (20)
  • M6 X 0,75 (3)
  • M6 X 1 (22)
  • M7 X 1 (7)
  • M8 X 1 (7)
  • M8 X 1,25 (24)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2B (83)
  • 3B (18)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6G-I (23)
  • 6H-I (226)
Tap PD Class
Tap PD Class
  • 0 (36)
  • 6G (8)
  • 6H (17)
  • D3 (7)
  • D4 (16)
  • D5 (26)
  • D6 (26)
  • D7 (10)
  • H2 (31)
  • H3 (162)
  • H4 (23)
  • H5 (66)
  • H6 (20)
  • H7 (29)
Tap Tolerance Class
Tap Tolerance Class
  • ISO 2 (225)
  • ISO 3 (24)
Number of Flutes
Number of Flutes
  • 2 (132)
  • 3 (522)
  • 4 (142)
  • 5 (12)
  • 6 (1)
Application
Coating
Coating
  • Oxide (43)
  • TiN (13)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KSMN34 (28)
  • KSP32 (83)
  • KSP39 (565)
  • KSU30 (2)
  • KSU31 (131)
Tap Standard
Tap Standard
  • ANSI (416)
  • DIN 371 (122)
  • DIN 374 (91)
  • DIN 376 (129)
  • JIS (8)
Tap Type
Tap Type
  • 10 (14)
  • 11 (285)
  • 13 (1)
  • 8 (509)
Front-End
Thread TPI
Thread TPI
  • 4.5 mm (1)
  • 5.0 mm (1)
  • 6.0 mm (3)
  • 7.0 mm (7)
  • 8.0 mm (7)
  • 9.0 mm (5)
  • 10.0 mm (10)
  • 11.0 mm (18)
  • 11.5 mm (2)
  • 12.0 mm (16)
  • 13.0 mm (18)
  • 14.0 mm (27)
  • 16.0 mm (29)
  • 18.0 mm (52)
  • 19.0 mm (4)
  • 20.0 mm (58)
  • 24.0 mm (61)
  • 27.0 mm (11)
  • 28.0 mm (29)
  • 32.0 mm (74)
  • 36.0 mm (2)
  • 40.0 mm (31)
  • 48.0 mm (5)
  • 56.0 mm (4)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 4.5 in (1)
  • 5.0 in (1)
  • 6.0 in (3)
  • 7.0 in (7)
  • 8.0 in (7)
  • 9.0 in (5)
  • 10.0 in (10)
  • 11.0 in (18)
  • 11.5 in (2)
  • 12.0 in (16)
  • 13.0 in (18)
  • 14.0 in (27)
  • 16.0 in (29)
  • 18.0 in (52)
  • 19.0 in (4)
  • 20.0 in (58)
  • 24.0 in (61)
  • 27.0 in (11)
  • 28.0 in (29)
  • 32.0 in (74)
  • 36.0 in (2)
  • 40.0 in (31)
  • 48.0 in (5)
  • 56.0 in (4)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.4 mm (7)
  • 0.45 mm (4)
  • 0.5 mm (21)
  • 0.6 mm (4)
  • 0.7 mm (17)
  • 0.75 mm (6)
  • 0.8 mm (20)
  • 1.0 mm (47)
  • 1.25 mm (41)
  • 1.5 mm (64)
  • 1.75 mm (19)
  • 2.0 mm (41)
  • 2.5 mm (19)
  • 3.0 mm (7)
  • 3.5 mm (7)
  • 4.0 mm (5)
  • 4.5 mm (2)
  • 5.0 mm (3)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.4 in (7)
  • 0.45 in (4)
  • 0.5 in (21)
  • 0.6 in (4)
  • 0.7 in (17)
  • 0.75 in (6)
  • 0.8 in (20)
  • 1.0 in (47)
  • 1.25 in (41)
  • 1.5 in (64)
  • 1.75 in (19)
  • 2.0 in (41)
  • 2.5 in (19)
  • 3.0 in (7)
  • 3.5 in (7)
  • 4.0 in (5)
  • 4.5 in (2)
  • 5.0 in (3)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (133)
  • PC (326)
  • PP (42)
  • SB (307)
  • TC (1)
Back-End
Back-End Diameter
Back-End Diameter
  • 2.8 mm (12)
  • 3.5 mm (16)
  • 3.581 mm (29)
  • 3.582 mm (34)
  • 4.0 mm (8)
  • 4.267 mm (31)
  • 4.5 mm (26)
  • 4.928 mm (42)
  • 5.0 mm (1)
  • 5.5 mm (1)
  • 5.588 mm (3)
  • 6.0 mm (43)
  • 6.2 mm (1)
  • 6.477 mm (43)
  • 7.0 mm (32)
  • 7.938 mm (7)
  • 8.0 mm (25)
  • 8.077 mm (45)
  • 8.204 mm (22)
  • 8.5 mm (1)
  • 9.0 mm (29)
  • 9.322 mm (33)
  • 9.332 mm (7)
  • 9.677 mm (28)
  • 9.678 mm (13)
  • 10.0 mm (17)
  • 10.897 mm (17)
  • 11.0 mm (27)
  • 11.113 mm (4)
  • 12.0 mm (22)
  • 12.192 mm (38)
  • 13.767 mm (3)
  • 14.0 mm (16)
  • 14.288 mm (4)
  • 14.986 mm (14)
  • 16.0 mm (18)
  • 17.463 mm (4)
  • 17.686 mm (1)
  • 17.704 mm (3)
  • 17.78 mm (4)
  • 18.0 mm (28)
  • 20.0 mm (6)
  • 20.32 mm (6)
  • 22.0 mm (14)
  • 22.733 mm (2)
  • 22.758 mm (1)
  • 23.02 mm (3)
  • 25.0 mm (5)
  • 25.926 mm (1)
  • 28.0 mm (9)
  • 28.575 mm (2)
  • 32.0 mm (3)
  • 36.0 mm (3)
  • 40.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.1102 in (12)
  • 0.1378 in (16)
  • 0.141 in (63)
  • 0.157 in (2)
  • 0.1575 in (6)
  • 0.168 in (31)
  • 0.1772 in (26)
  • 0.194 in (42)
  • 0.1969 in (1)
  • 0.2165 in (1)
  • 0.22 in (3)
  • 0.2362 in (43)
  • 0.2441 in (1)
  • 0.255 in (43)
  • 0.2756 in (29)
  • 0.276 in (3)
  • 0.3125 in (7)
  • 0.315 in (25)
  • 0.318 in (45)
  • 0.323 in (22)
  • 0.3346 in (1)
  • 0.3543 in (29)
  • 0.367 in (40)
  • 0.381 in (41)
  • 0.3937 in (17)
  • 0.429 in (17)
  • 0.433 in (2)
  • 0.4331 in (25)
  • 0.4375 in (4)
  • 0.472 in (2)
  • 0.4724 in (20)
  • 0.48 in (38)
  • 0.542 in (3)
  • 0.5512 in (16)
  • 0.5625 in (4)
  • 0.59 in (14)
  • 0.6299 in (16)
  • 0.63 in (2)
  • 0.6875 in (4)
  • 0.6963 in (1)
  • 0.697 in (3)
  • 0.7 in (4)
  • 0.7087 in (27)
  • 0.709 in (1)
  • 0.787 in (2)
  • 0.7874 in (4)
  • 0.8 in (6)
  • 0.866 in (1)
  • 0.8661 in (13)
  • 0.895 in (2)
  • 0.896 in (1)
  • 0.9063 in (3)
  • 0.984 in (2)
  • 0.9843 in (3)
  • 1.0207 in (1)
  • 1.1024 in (9)
  • 1.125 in (2)
  • 1.2598 in (3)
  • 1.4173 in (3)
  • 1.5748 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Multipurpose Taps

GOtap™ T820 Spiral-Point HSS-E Taps • Through Holes
(132 Products)
  • Tapping: Through HoleTapping: Through Hole
  • 3861838618
  • Chamfer Form: Plug Chamfer (3–5)Chamfer Form: Plug Chamfer (3–5)
  • Flood Coolant: TappingFlood Coolant: Tapping
  • Manufacturer’s Specs: ANSIManufacturer’s Specs: ANSI
  • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
  • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
  • Multipurpose Taps: Spiral PointMultipurpose Taps: Spiral Point
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Tap Pitch Diameter Limit
5455861 T820NC#08-32RH3-A T820NC#08-32RH3-A KSP39 8 - 32 53.8000 2.120 9.7000 .3800 19.3000 .7600 4.267 .168 2 H3  
    List price:
    $22.96 /each.
    Your price::
    5455869 T820NC#10-24RH3-A T820NC#10-24RH3-A KSP39   10 - 24 60.2000 2.370 12.7000 .5000 23.2000 .9100 4.928 .194 2 H3
      List price:
      $22.96 /each.
      Your price::
      5455867 T820NC#10-24RH3-A T820NC#10-24RH3-A KSP32 10 - 24 60.2000 2.370 12.7000 .5000 23.2000 .9100 4.928 .194 2 H3  
        List price:
        $29.87 /each.
        Your price::
        5455846 T820NF#06-40RH2-A T820NF#06-40RH2-A KSP39 6 - 40 50.5000 1.990 9.7000 .3800 18.0000 .7100 3.581 .141 2 H2  
          List price:
          $22.96 /each.
          Your price::
          5455866 T820NF#08-36RH2-A T820NF#08-36RH2-A KSP39 8 - 36 53.7000 2.110 9.7000 .3800 19.3000 .7600 4.267 .168 2 H2  
            List price:
            $22.96 /each.
            Your price::
            5455883 T820NF#10-32RH3-A T820NF#10-32RH3-A KSP39 10 - 32 60.0000 2.360 12.7000 .5000 23.0000 .9100 4.928 .194 2 H3  
              List price:
              $22.96 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Multipurpose Taps

              GOtap™ T830 Spiral-Flute HSS-E Taps • Blind Holes
              (49 Products)
              • Tapping: Blind HoleTapping: Blind Hole
              • 3861838618
              • Chamfer Form C (2–3)Chamfer Form C (2–3)
              • Tapping Helix Angle: 45°Tapping Helix Angle: 45°
              • DIN number 371DIN number 371
              • DIN number 374DIN number 374
              • DIN number 376DIN number 376
              • Flood Coolant: TappingFlood Coolant: Tapping
              • Class of Fit: 6HClass of Fit: 6H
              • Class of Fit: 6GClass of Fit: 6G
              • Manufacturer’s Specs: MManufacturer’s Specs: M
              • Manufacturer’s Specs: MFManufacturer’s Specs: MF
              • Manufacturer’s Specs: ISO 2Manufacturer’s Specs: ISO 2
              • Manufacturer’s Specs: ISO 3Manufacturer’s Specs: ISO 3
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
              5417283 T830M035X060R6H-D1 T830M035X060R6H-D1 KSP39   M3,5 X 0,6 56.0000 2.200 9.0000 .3500 20.0000 .7900 4.0 .1575 2 DIN 371 6H-I
                List price:
                $57.80 /each.
                Your price::
                5417285 T830M040X070R6H-D1 T830M040X070R6H-D1 KSP39 M4 X 0,7 63.0000 2.480 11.0000 .4300 21.0000 .8300 4.5 .1772 3 DIN 371 6H-I  
                  List price:
                  $57.80 /each.
                  Your price::
                  5417294 T830M080X125R6H-D1 T830M080X125R6H-D1 KSP32 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.0 .315 3 DIN 371 6H-I  
                    List price:
                    $71.70 /each.
                    Your price::
                    5417295 T830M080X125R6H-D1 T830M080X125R6H-D1 KSP39 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.0 .315 3 DIN 371 6H-I  
                      List price:
                      $62.64 /each.
                      Your price::
                      5417300 T830M100X150R6H-D1 T830M100X150R6H-D1 KSP39 M10 X 1,5 100.0000 3.940 18.0000 .7100 39.0000 1.540 10.0 .3937 3 DIN 371 6H-I  
                        List price:
                        $88.38 /each.
                        Your price::
                        5417299 T830M100X150R6H-D1 T830M100X150R6H-D1 KSP32 M10 X 1,5 100.0000 3.940 18.0000 .7100 39.0000 1.540 10.0 .3937 3 DIN 371 6H-I  
                          List price:
                          $101.21 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Multipurpose Taps

                          GOtap™ T832 Spiral-Flute HSS-E Taps • Blind Holes
                          (8 Products)
                          • Tapping: Blind HoleTapping: Blind Hole
                          • 3861838618
                          • Chamfer Form E (1.5–2)Chamfer Form E (1.5–2)
                          • Tapping Helix Angle: 45°Tapping Helix Angle: 45°
                          • DIN number 371DIN number 371
                          • DIN number 374DIN number 374
                          • DIN number 376DIN number 376
                          • Flood Coolant: TappingFlood Coolant: Tapping
                          • Class of Fit: 6HClass of Fit: 6H
                          • Manufacturer’s Specs: MManufacturer’s Specs: M
                          • Manufacturer’s Specs: MFManufacturer’s Specs: MF
                          • Manufacturer’s Specs: ISO 2Manufacturer’s Specs: ISO 2
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
                          5417385 T832M080X125R6H-D1 T832M080X125R6H-D1 KSP39 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.0 .315 3 DIN 371 6H-I  
                            List price:
                            $62.64 /each.
                            Your price::
                            5417398 T832M120X175R6H-D6 T832M120X175R6H-D6 KSP39 M12 X 1,75