Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Thread Milling

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (389)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (389)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (389)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (389)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (389)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (370)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (389)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (354)
  • M Stainless Steel (389)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (389)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (389)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (354)
  • K Cast Iron (396)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (396)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (389)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (389)
  • N Non-Ferrous Materials (42)
    • N1
      Wrought Aluminum
      (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (42)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (42)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (42)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (42)
    • N6
      Carbon, Graphite Composites, CFRP
      (35)
  • S High-Temp Alloys (268)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (268)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (268)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (268)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (268)
  • H Hardened Materials (254)
    • H1
      Hardened Materials 44-48 HRC
      (254)
Applications
Applications
  • Countersinking Countersinking (23)
  • Drilling Drilling (7)
  • ID Thread Turning ID Thread Turning (209)
  • OD Thread Turning OD Thread Turning (58)
  • Pipe Thread Pipe Thread (45)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Roughing Shoulder Roughing (33)
  • Shoulder Square End Shoulder Square End (33)
  • Thread Milling Thread Milling (181)
  • Threading Threading (181)
Cutting Diameter
Cutting Diameter
  • 0.095 in (1)
  • 0.124 in (2)
  • 0.157 in (1)
  • 0.159 in (1)
  • 0.185 in (1)
  • 0.189 in (3)
  • 0.232 in (1)
  • 0.237 in (2)
  • 0.242 in (1)
  • 0.256 in (2)
  • 0.264 in (1)
  • 0.301 in (1)
  • 0.315 in (2)
  • 0.323 in (2)
  • 0.354 in (5)
  • 0.39 in (3)
  • 0.394 in (4)
  • 0.399 in (1)
  • 0.409 in (1)
  • 0.41 in (1)
  • 0.449 in (1)
  • 0.45 in (2)
  • 0.453 in (3)
  • 0.457 in (2)
  • 0.465 in (1)
  • 0.473 in (2)
  • 0.477 in (1)
  • 0.516 in (1)
  • 0.531 in (1)
  • 0.535 in (3)
  • 0.551 in (3)
  • 0.579 in (1)
  • 0.58 in (1)
  • 0.581 in (1)
  • 0.591 in (2)
  • 0.595 in (1)
  • 0.608 in (2)
  • 0.61 in (3)
  • 0.63 in (4)
  • 0.669 in (5)
  • 0.67 in (2)
  • 0.677 in (1)
  • 0.681 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (3)
  • 0.79 in (1)
  • 0.799 in (1)
  • 0.802 in (1)
  • 0.807 in (2)
  • 0.811 in (4)
  • 0.835 in (2)
  • 0.866 in (5)
  • 0.87 in (5)
  • 0.906 in (1)
  • 0.909 in (2)
  • 0.917 in (1)
  • 0.965 in (1)
  • 0.969 in (1)
  • 0.984 in (1)
  • 1.02 in (2)
  • 1.024 in (4)
  • 1.039 in (2)
  • 1.18 in (3)
  • 1.181 in (13)
  • 1.22 in (4)
  • 1.358 in (1)
  • 1.379 in (1)
  • 1.417 in (4)
  • 1.421 in (2)
  • 1.437 in (1)
  • 1.441 in (2)
  • 1.457 in (2)
  • 1.46 in (1)
  • 1.478 in (1)
  • 1.539 in (1)
  • 1.651 in (1)
  • 1.655 in (4)
  • 1.69 in (1)
  • 1.732 in (2)
  • 1.811 in (1)
  • 1.891 in (2)
  • 1.929 in (2)
  • 2.047 in (2)
  • 2.09 in (1)
  • 2.091 in (1)
  • 2.205 in (1)
  • 2.283 in (1)
  • 2.319 in (2)
  • 2.48 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.401 mm (1)
  • 3.151 mm (2)
  • 4.0 mm (1)
  • 4.05 mm (1)
  • 4.7 mm (1)
  • 4.801 mm (3)
  • 5.9 mm (1)
  • 6.0 mm (2)
  • 6.15 mm (1)
  • 6.5 mm (2)
  • 6.7 mm (1)
  • 7.65 mm (1)
  • 8.0 mm (2)
  • 8.201 mm (2)
  • 9.0 mm (5)
  • 9.9 mm (3)
  • 10.0 mm (4)
  • 10.125 mm (1)
  • 10.351 mm (1)
  • 10.4 mm (1)
  • 11.4 mm (1)
  • 11.425 mm (2)
  • 11.5 mm (3)
  • 11.601 mm (2)
  • 11.8 mm (1)
  • 12.0 mm (2)
  • 12.101 mm (1)
  • 13.101 mm (1)
  • 13.5 mm (1)
  • 13.601 mm (3)
  • 14.0 mm (3)
  • 14.701 mm (1)
  • 14.726 mm (1)
  • 14.75 mm (1)
  • 15.0 mm (2)
  • 15.101 mm (1)
  • 15.451 mm (2)
  • 15.5 mm (3)
  • 16.0 mm (4)
  • 17.0 mm (5)
  • 17.026 mm (2)
  • 17.2 mm (1)
  • 17.3 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 20.076 mm (1)
  • 20.3 mm (1)
  • 20.375 mm (1)
  • 20.5 mm (2)
  • 20.6 mm (4)
  • 21.201 mm (2)
  • 22.0 mm (5)
  • 22.1 mm (5)
  • 23.0 mm (1)
  • 23.1 mm (2)
  • 23.3 mm (1)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 25.0 mm (1)
  • 25.901 mm (2)
  • 26.0 mm (4)
  • 26.401 mm (2)
  • 29.975 mm (3)
  • 30.0 mm (13)
  • 31.0 mm (4)
  • 34.5 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (4)
  • 36.1 mm (2)
  • 36.5 mm (1)
  • 36.6 mm (2)
  • 37.0 mm (2)
  • 37.075 mm (1)
  • 37.551 mm (1)
  • 39.1 mm (1)
  • 41.901 mm (1)
  • 42.0 mm (4)
  • 42.926 mm (1)
  • 44.0 mm (2)
  • 46.0 mm (1)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 52.0 mm (2)
  • 53.075 mm (1)
  • 53.1 mm (1)
  • 56.0 mm (1)
  • 58.0 mm (1)
  • 58.901 mm (2)
  • 63.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 13.9 mm (1)
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 17.026 mm (1)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 27.951 mm (1)
  • 28.0 mm (1)
  • 36.1 mm (1)
  • 39.075 mm (1)
  • 45.0 mm (1)
  • 49.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.547 in (1)
  • 0.551 in (1)
  • 0.669 in (1)
  • 0.67 in (1)
  • 0.866 in (1)
  • 0.87 in (1)
  • 1.1 in (1)
  • 1.102 in (1)
  • 1.421 in (1)
  • 1.538 in (1)
  • 1.772 in (1)
  • 1.929 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.25 mm (1)
  • 8.725 mm (1)
  • 10.4 mm (4)
  • 10.775 mm (1)
  • 10.925 mm (4)
  • 11.0 mm (3)
  • 12.351 mm (1)
  • 16.0 mm (13)
  • 16.45 mm (1)
  • 16.825 mm (2)
  • 20.25 mm (1)
  • 20.451 mm (1)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.35 mm (1)
  • 26.925 mm (5)
  • 27.0 mm (6)
  • 28.0 mm (1)
  • 29.151 mm (1)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 36.7 mm (1)
  • 38.5 mm (2)
  • 41.151 mm (2)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.246 in (1)
  • 0.345 in (1)
  • 0.41 in (4)
  • 0.424 in (1)
  • 0.43 in (4)
  • 0.433 in (3)
  • 0.486 in (1)
  • 0.63 in (13)
  • 0.648 in (1)
  • 0.662 in (2)
  • 0.797 in (1)
  • 0.805 in (1)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.998 in (1)
  • 1.06 in (5)
  • 1.063 in (6)
  • 1.102 in (1)
  • 1.149 in (1)
  • 1.266 in (1)
  • 1.296 in (1)
  • 1.445 in (1)
  • 1.516 in (2)
  • 1.62 in (2)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • BSPT (18)
  • BSW (99)
  • M (182)
  • MF (12)
  • NC/UNC (7)
  • NPS (15)
  • NPT (46)
  • NPTF (32)
  • UN (156)
Thread Size
Thread Size
  • 1/2-13 (1)
  • 1/4-20 (1)
  • 3/8-16 (1)
  • 5/16-18 (1)
  • 5/8-11 (1)
  • 7/16-14 (1)
  • 9/16-12 (1)
  • M10 X 1.0 (1)
  • M10 X 1.5 (1)
  • M10X1.5 (2)
  • M12 X 1.0 (1)
  • M12 X 1.5 (1)
  • M12 X 1.75 (1)
  • M12X1.25 (1)
  • M12X1.75 (2)
  • M14 X 1.5 (1)
  • M14 X 2.0 (1)
  • M14X1.5 (1)
  • M14X2 (1)
  • M16 X 1.5 (1)
  • M16 X 2.0 (1)
  • M16X2 (2)
  • M18 X 1.5 (1)
  • M20 X 1.5 (1)
  • M20 X 2.5 (1)
  • M3 X 0.5 (1)
  • M4 X 0.7 (1)
  • M4X0.7 (1)
  • M5 X 0.8 (1)
  • M5X0.8 (1)
  • M6 X 1 (1)
  • M6X1 (2)
  • M8 X 0.75 (1)
  • M8 X 1.0 (1)
  • M8 X 1.25 (1)
  • M8X1 (1)
  • M8X1.25 (2)
Reach
Reach
  • 0.378 in (1)
  • 0.466 in (1)
  • 0.472 in (1)
  • 0.473 in (3)
  • 0.52 in (1)
  • 0.579 in (1)
  • 0.61 in (2)
  • 0.648 in (1)
  • 0.662 in (1)
  • 0.669 in (2)
  • 0.678 in (1)
  • 0.698 in (1)
  • 0.725 in (1)
  • 0.787 in (1)
  • 0.79 in (1)
  • 0.797 in (1)
  • 0.805 in (1)
  • 0.807 in (1)
  • 0.836 in (1)
  • 0.866 in (2)
  • 0.87 in (2)
  • 0.906 in (1)
  • 0.909 in (1)
  • 0.931 in (1)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.984 in (1)
  • 0.994 in (1)
  • 0.998 in (1)
  • 1.0 in (1)
  • 1.02 in (2)
  • 1.024 in (4)
  • 1.042 in (1)
  • 1.088 in (1)
  • 1.098 in (1)
  • 1.102 in (3)
  • 1.149 in (1)
  • 1.181 in (2)
  • 1.191 in (2)
  • 1.26 in (2)
  • 1.266 in (1)
  • 1.296 in (1)
  • 1.319 in (2)
  • 1.341 in (1)
  • 1.348 in (1)
  • 1.379 in (1)
  • 1.417 in (2)
  • 1.421 in (1)
  • 1.445 in (1)
  • 1.449 in (1)
  • 1.457 in (1)
  • 1.496 in (2)
  • 1.5 in (1)
  • 1.567 in (1)
  • 1.575 in (4)
  • 1.579 in (3)
  • 1.62 in (2)
  • 1.68 in (1)
  • 1.689 in (2)
  • 1.69 in (1)
  • 1.693 in (10)
  • 1.701 in (3)
  • 1.732 in (1)
  • 1.752 in (1)
  • 1.77 in (1)
  • 1.772 in (3)
  • 1.78 in (1)
  • 1.788 in (1)
  • 1.891 in (2)
  • 1.969 in (5)
  • 2.0 in (3)
  • 2.031 in (2)
  • 2.047 in (1)
  • 2.15 in (1)
  • 2.165 in (4)
  • 2.201 in (2)
  • 2.283 in (1)
  • 2.559 in (7)
  • 2.561 in (1)
  • 2.567 in (1)
  • 2.575 in (2)
  • 2.693 in (1)
  • 2.961 in (1)
  • 2.969 in (1)
  • 3.15 in (4)
  • 3.209 in (1)
  • 3.358 in (2)
  • 3.362 in (2)
  • 3.531 in (1)
  • 3.598 in (1)
  • 3.622 in (1)
  • 3.858 in (1)
  • 3.938 in (1)
  • 3.95 in (1)
  • 3.954 in (1)
  • 4.0 in (1)
  • 4.055 in (1)
  • 4.059 in (1)
  • 4.346 in (1)
  • 5.039 in (2)
Reach Min to Reach Max
Reach
Reach
  • 9.601 mm (1)
  • 11.826 mm (1)
  • 11.951 mm (1)
  • 12.0 mm (3)
  • 13.201 mm (1)
  • 14.701 mm (1)
  • 15.5 mm (2)
  • 16.45 mm (1)
  • 16.825 mm (1)
  • 17.0 mm (2)
  • 17.225 mm (1)
  • 17.7 mm (1)
  • 18.425 mm (1)
  • 20.0 mm (1)
  • 20.076 mm (1)
  • 20.25 mm (1)
  • 20.451 mm (1)
  • 20.5 mm (1)
  • 21.225 mm (1)
  • 22.0 mm (2)
  • 22.1 mm (2)
  • 23.0 mm (1)
  • 23.1 mm (1)
  • 23.651 mm (1)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.0 mm (1)
  • 25.25 mm (1)
  • 25.35 mm (1)
  • 25.401 mm (1)
  • 25.901 mm (2)
  • 26.0 mm (4)
  • 26.475 mm (1)
  • 27.625 mm (1)
  • 27.901 mm (1)
  • 28.0 mm (3)
  • 29.151 mm (1)
  • 30.0 mm (2)
  • 30.25 mm (2)
  • 32.0 mm (2)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 33.5 mm (2)
  • 34.051 mm (1)
  • 34.25 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (2)
  • 36.1 mm (1)
  • 36.7 mm (1)
  • 36.801 mm (1)
  • 37.0 mm (1)
  • 38.0 mm (2)
  • 38.1 mm (1)
  • 39.801 mm (1)
  • 40.0 mm (4)
  • 40.1 mm (3)
  • 41.151 mm (2)
  • 42.676 mm (1)
  • 42.901 mm (2)
  • 42.926 mm (1)
  • 43.0 mm (10)
  • 43.2 mm (3)
  • 44.0 mm (1)
  • 44.5 mm (1)
  • 44.95 mm (1)
  • 45.0 mm (3)
  • 45.2 mm (1)
  • 45.401 mm (1)
  • 48.0 mm (2)
  • 50.0 mm (5)
  • 50.801 mm (3)
  • 51.551 mm (2)
  • 52.0 mm (1)
  • 54.6 mm (1)
  • 55.0 mm (4)
  • 55.901 mm (2)
  • 58.0 mm (1)
  • 65.0 mm (7)
  • 65.05 mm (1)
  • 65.2 mm (1)
  • 65.4 mm (2)
  • 68.4 mm (1)
  • 75.2 mm (1)
  • 75.4 mm (1)
  • 80.0 mm (4)
  • 81.5 mm (1)
  • 85.301 mm (2)
  • 85.4 mm (2)
  • 89.65 mm (1)
  • 91.4 mm (1)
  • 92.0 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 100.301 mm (1)
  • 100.4 mm (1)
  • 101.601 mm (1)
  • 103.0 mm (1)
  • 103.101 mm (1)
  • 110.4 mm (1)
  • 128.0 mm (2)
Reach Min to Reach Max