KM4X™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (169)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(169)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(169)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(169)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(169)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(169)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(169)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(169)
- M Stainless Steel (167)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(167)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(167)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(167)
- K Cast Iron (169)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(169)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(169)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(169)
- N Non-Ferrous Materials (157)
- N1Wrought Aluminum (157)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(155)
- N3High-Silicon Aluminum Alloys Si >12.2%(103)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (157)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (155)
- N6Carbon, Graphite Composites, CFRP (155)
- N7MMC's (147)
- S High-Temp Alloys (163)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(163)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(163)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(163)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(163)
- H Hardened Materials (130)
- H1Hardened Materials 44-48 HRC(130)
- H2Hardened Materials 48-55 HRC(130)
- H3Hardened Materials 56-60 HRC(122)
- H4Hardened Materials >60 HRC(111)
- C CFRP Materials (130)
- C1CFRP, CFRP / CFRP (130)
- C2CFRP / Aluminium CFRP / Non-Ferrous (126)
Applications
Applications
- Chamfer Turning (17)
- Cut-Off (4)
- Deep Grooving (20)
- Face Grooving (6)
- Facing (133)
- Grooving (20)
- ID Facing (80)
- ID Grooving (16)
- ID Thread Turning (22)
- Multiple Direction Cutting (99)
- OD Thread Turning (26)
- Plunge Turning (16)
- Profiling (81)
- TRN Boring (122)
- Threading (24)
- Turning (141)
Type of Thread
Type of Thread
- 55 (8)
- 60 (22)
- ACME (24)
- API (20)
- API BUTTRESS (4)
- API RD (14)
- BSPT (4)
- BSW (16)
- BUTTRESS (14)
- M (16)
- NPT (12)
- NPTF (4)
- RD DIN 405 (8)
- STUB ACME (16)
- TR DIN 103 (8)
- UN (18)
- UNJ (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (154)
- Lightly Interrupted Cut (158)
- Smooth Cut (160)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 0.0 (2)
- 45.0 (5)
- 48.0 (5)
- 49.683 (2)
- 50.0 (2)
- 72.5 (1)
- 75.0 (17)
- 90.0 (54)
- 93.0 (35)
- 95.0 (42)
- 107.5 (10)
to
Connection Style
Connection Style
- KM (94)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (6)
- 1.0 (100)
- 2.0 (116)
- 3.0 (34)
- 4.0 (88)
- 6.0 (18)
- 8.0 (54)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.757 in(77)
- 3.938 in(51)
- 4.331 in(1)
- 4.529 in(12)
- 4.921 in(6)
- 5.513 in(22)
- 6.694 in(6)
to
Over All Length [L]
Over All Length [L]
- 70.0 mm(77)
- 100.0 mm(51)
- 110.0 mm(1)
- 115.0 mm(12)
- 125.0 mm(6)
- 140.0 mm(22)
- 170.0 mm(6)
to
Corner Radius
Corner Radius
- 0.001 in(3)
- 0.002 in(26)
- 0.003 in(18)
- 0.004 in(88)
- 0.005 in(9)
- 0.006 in(17)
- 0.007 in(15)
- 0.008 in(85)
- 0.01 in(15)
- 0.011 in(10)
- 0.012 in(11)
- 0.014 in(38)
- 0.015 in(1)
- 0.016 in(117)
- 0.017 in(4)
- 0.019 in(14)
- 0.02 in(9)
- 0.021 in(3)
- 0.023 in(18)
- 0.024 in(10)
- 0.027 in(2)
- 0.028 in(1)
- 0.03 in(1)
- 0.031 in(129)
- 0.033 in(6)
- 0.035 in(14)
- 0.037 in(2)
- 0.038 in(1)
- 0.039 in(10)
- -0.039 in(6)
- 0.047 in(129)
- 0.049 in(8)
- 0.055 in(1)
- 0.06 in(9)
- 0.062 in(26)
- 0.063 in(119)
- 0.069 in(8)
- 0.078 in(8)
- 0.079 in(14)
- 0.089 in(14)
- 0.094 in(23)
- 0.095 in(56)
- 0.098 in(6)
- 0.125 in(12)
- 0.126 in(23)
- 0.157 in(4)
- 0.237 in(1)
- 0.25 in(2)
- 0.315 in(3)
- 0.375 in(2)
- 0.394 in(1)
- 0.492 in(1)
- 0.5 in(2)
- 0.63 in(1)
to
Corner Radius
Corner Radius
- 0.025 mm(3)
- 0.05 mm(26)
- 0.076 mm(18)
- 0.1 mm(88)
- 0.125 mm(9)
- 0.151 mm(17)
- 0.176 mm(15)
- 0.2 mm(85)
- 0.225 mm(9)
- 0.25 mm(15)
- 0.275 mm(10)
- 0.301 mm(11)
- 0.325 mm(19)
- 0.351 mm(33)
- 0.375 mm(1)
- 0.4 mm(117)
- 0.426 mm(4)
- 0.45 mm(14)
- 0.476 mm(4)
- 0.5 mm(9)
- 0.525 mm(3)
- 0.576 mm(18)
- 0.601 mm(10)
- 0.65 mm(2)
- 0.701 mm(1)
- 0.75 mm(1)
- 0.775 mm(8)
- 0.8 mm(121)
- 0.826 mm(6)
- 0.9 mm(14)
- 0.925 mm(2)
- 0.976 mm(1)
- 1.0 mm(10)
- -1.0 mm(6)
- 1.201 mm(129)
- 1.25 mm(8)
- 1.401 mm(1)
- 1.5 mm(8)
- 1.526 mm(1)
- 1.576 mm(26)
- 1.6 mm(119)
- 1.75 mm(8)
- 1.975 mm(8)
- 2.0 mm(14)
- 2.25 mm(14)
- 2.375 mm(23)
- 2.401 mm(56)
- 2.5 mm(6)
- 3.176 mm(12)
- 3.2 mm(23)
- 4.0 mm(4)
- 6.0 mm(1)
- 6.351 mm(2)
- 8.0 mm(3)
- 9.525 mm(2)
- 10.0 mm(1)
- 12.5 mm(1)
- 12.701 mm(2)
- 16.0 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (77)
- 241 (18)
- AC5 (1)
- CG4 (1)
- CL4 (57)
- CM2 (72)
- CM3 (64)
- CM4 (33)
- CM5 (2)
- CPX (80)
- CW2 (37)
- CW2015 (76)
- CW5025 (80)
- GH1 (2)
- GX (44)
- HCK10 (7)
- HCK20 (1)
- HK1500 (76)
- HK35 (7)
- HT2 (58)
- HTX (37)
- HWK15 (7)
- K00326 (8)
- K00331 (2)
- K060 (33)
- K090 (86)
- K1 (39)
- K1010P (2)
- K10M (109)
- K10P (99)
- K10U (84)
- K15 (3)
- K15U (84)
- K20K (105)
- K21 (43)
- K25M (86)
- K25P (90)
- K2885 (8)
- K313 (142)
- K35P (62)
- K420 (90)
- K45 (41)
- K4H (8)
- K68 (139)
- K8735 (8)
- KB1340 (27)
- KB1345 (47)
- KB1610 (53)
- KB1625 (49)
- KB1630 (47)
- KB5610 (52)
- KB5625 (57)
- KB5630 (36)
- KB9610 (78)
- KB9640 (39)
- KBH10 (72)
- KBH10B (47)
- KBH20 (87)
- KBH20B (47)
- KBK35 (18)
- KC210 (70)
- KC250 (77)
- KC5010 (157)
- KC5020P (8)
- KC5025 (152)
- KC5410 (134)
- KC5510 (94)
- KC5525 (65)
- KC710 (38)
- KC720 (110)
- KC722 (34)
- KC730 (130)
- KC7310 (100)
- KC732 (95)
- KC8050 (139)
- KC810 (143)
- KC850 (159)
- KC9010 (95)
- KC9025 (132)
- KC910 (132)
- KC9105 (117)
- KC9110 (151)
- KC9120 (129)
- KC9125 (137)
- KC9125RR (11)
- KC9140 (107)
- KC9145 (103)
- KC9210 (19)
- KC9215 (92)
- KC9225 (121)
- KC9240 (126)
- KC9240NEW (122)
- KC9245 (94)
- KC9315 (132)
- KC9320 (128)
- KC9325 (113)
- KC935 (143)
- KC950 (135)
- KC990 (109)
- KCD25 (35)
- KCK05 (121)
- KCK05B (106)
- KCK15 (116)
- KCK15B (125)
- KCK20 (134)
- KCK20B (138)
- KCM15 (113)
- KCM15B (111)
- KCM25 (129)
- KCM25B (117)
- KCM25S (2)
- KCM35 (111)
- KCM35B (82)
- KCP05 (107)
- KCP05B (81)
- KCP10 (137)
- KCP10B (142)
- KCP15 (6)
- KCP20S (2)
- KCP25 (140)
- KCP25B (149)
- KCP25C (139)
- KCP30 (128)
- KCP30B (103)
- KCP40 (101)
- KCP40B (109)
- KCPK05 (94)
- KCS10 (39)
- KCS10B (116)
- KCS25S (2)
- KCU10 (153)
- KCU10B (146)
- KCU25 (141)
- KCU25B (136)
- KD050 (59)
- KD081 (63)
- KD100 (53)
- KD120 (63)
- KD1400 (52)
- KD1405 (34)
- KD1425 (68)
- KM1 (36)
- KMF (18)
- KN10S (2)
- KS15 (26)
- KT1120 (16)
- KT125 (70)
- KT150 (43)
- KT175 (76)
- KT315 (113)
- KT325 (58)
- KT5020 (2)
- KTP10 (80)
- KTP25S (71)
- KU10 (8)
- KU10T (105)
- KU25T (16)
- KU30T (129)
- KY1310 (51)
- KY1320 (86)
- KY1540 (47)
- KY1615 (82)
- KY2000 (49)
- KY2100 (33)
- KY3000 (96)
- KY3400 (69)
- KY3500 (90)
- KY4000 (35)
- KY4300 (42)
- KY4400 (88)
- KYHK15B (88)
- KYK10 (43)
- KYK25 (65)
- KYK35 (90)
- KYS25 (41)
- KYS30 (51)
- MC2 (2)
- NL200 (37)
- NL250 (94)
- NL300 (85)
- NL400 (47)
- NL920 (76)
- P25 (34)
- PB100 (26)
- PB170 (29)
- PB250 (31)
- PB300 (18)
- PD100 (7)
- PD50 (7)
- PN120 (1)
- PS5 (39)
- SP0819 (73)
- SP0A00 (7)
- SP0PW3 (5)
- SP3019 (61)
- SP4019 (70)
- SP4036 (2)
- SP4066 (1)
- SP4093 (2)
- SP61EJ (7)
- SPADAP (19)
- SPN4W2 (4)
- THM (69)
- THM-X (51)
- THMF-X (25)
- TN10P (120)
- TN10U (89)
- TN15M (109)
- TN15U (84)
- TN2000 (85)
- TN20K (113)
- TN20P (117)
- TN30M (111)
- TN30P (94)
- TN4000 (78)
- TN5015 (100)
- TN5020 (102)
- TN5105 (83)
- TN5120 (110)
- TN6010 (72)
- TN6025 (86)
- TN7005 (71)
- TN7010 (110)
- TN7015 (119)
- TN7025 (119)
- TN7035 (102)
- TN7105 (69)
- TN7110 (118)
- TN7115 (117)
- TN7125 (111)
- TN7135 (102)
- TN8025 (110)
- TTI15 (48)
- TTM (6)
- TTM09 (24)
- TTR (44)
- TTR-X (4)
- TTS (57)
- TTX (51)
- W00342 (13)
- WBH10C (72)
- WBH10P (36)
- WBH10U (53)
- WBH20P (77)
- WBH25P (43)
- WBH25U (66)
- WBH30P (36)
- WBK40U (27)
- WBK45U (58)
- WDN00U (26)
- WDN25U (52)
- WK05CT (107)
- WK15CT (73)
- WK20CT (118)
- WM15CT (113)
- WM25CT (116)
- WM35CT (94)
- WP05CT (28)
- WP15CT (125)
- WP20TT (4)
- WP25CT (125)
- WP35CT (119)
- WS10PT (105)
- WS25PT (102)
- WU05PT (13)
- WU10HT (113)
- WU10PT (83)
- WU25PT (80)
- X00511 (18)
- X00580 (18)
- X00581 (18)
- X00582 (18)
- X00583 (18)
- X00584 (18)
- X00585 (18)
- X00586 (18)
- X00591 (18)
- X00592 (18)
- X00593 (18)
- X00594 (18)
- X00596 (18)
- X00597 (18)
- X00599 (18)
Hand Of Tool
Hand Of Tool
- L (44)
- N (7)
- R (43)
Wiper Insert
Wiper Insert
- N (171)
- Y (59)
F Dimension
F Dimension
- 0.0 mm(3)
- 8.0 mm(1)
- 10.0 mm(1)
- 12.5 mm(1)
- 16.0 mm(1)
- 17.0 mm(6)
- 22.0 mm(12)
- 27.0 mm(10)
- 35.0 mm(6)
- 38.0 mm(4)
- 43.0 mm(35)
- 58.0 mm(8)
- 63.0 mm(6)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.315 in(1)
- 0.394 in(1)
- 0.492 in(1)
- 0.63 in(1)
- 0.669 in(6)
- 0.866 in(12)
- 1.063 in(10)
- 1.379 in(6)
- 1.496 in(4)
- 1.693 in(35)
- 2.283 in(8)
- 2.48 in(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(4)
- -1.0 mm(4)
- 32.0 mm(6)
- 40.0 mm(12)
- 41.301 mm(2)
- 47.6 mm(2)
- 50.0 mm(10)
- 57.2 mm(2)
- 63.0 mm(6)
- 80.0 mm(4)
- 86.0 mm(38)
- 88.9 mm(2)
- 100.0 mm(12)
- 120.0 mm(33)
- 139.701 mm(2)
- 174.601 mm(2)
- 209.601 mm(2)
- 222.3 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(4)
- -0.039 in(4)
- 1.26 in(6)
- 1.575 in(12)
- 1.627 in(2)
- 1.874 in(2)
- 1.969 in(10)
- 2.253 in(2)
- 2.48 in(6)
- 3.15 in(4)
- 3.386 in(38)
- 3.5 in(2)
- 3.938 in(12)
- 4.724 in(33)
- 5.5 in(2)
- 6.875 in(2)
- 8.252 in(2)
- 8.752 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -0.039 in(6)
- 393.661 in(19)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(6)
- 9999.0 mm(19)
to
Cutting Direction
Cutting Direction
- B (22)
- E (24)
- S (48)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (61)
- NEGATIVE-ZERO (13)
- NEUTRAL (ZERO) (15)
Maximum Bore Depth
Maximum Bore Depth
- 2.757 in(42)
- 3.477 in(6)
- 3.938 in(33)
- 4.42 in(12)
- 4.485 in(3)
- 4.49 in(7)
- 4.529 in(12)
- 5.671 in(6)
to
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(42)
- 88.325 mm(6)
- 100.0 mm(33)
- 112.275 mm(12)
- 113.926 mm(3)
- 114.051 mm(7)
- 115.0 mm(12)
- 144.05 mm(6)
to
Boring Bar Material
Boring Bar Material
- S (40)
Front-End
Adapter Front-End
Adapter Front-End
- BOEING TAPER FLANGE (1)
- BORING BAR ADAPTER (2)
- CARTRIDGE MOUNT (12)
- COMBI SHELL ADAPTER (5)
- CUTOFF SUPPORT BLADE (6)
- END MILL ADAPTER (44)
- ER COLLET CHUCK (16)
- FM ADAPTER (1)
- HTS MODULAR ADAPTER (2)
- HYDRAULIC CHUCK (59)
- HYDRAULIC CHUCK-HIGH TORQUE (9)
- HYDRAULIC CHUCK-SLIM LINE (7)
- KM MODULAR ADAPTER (25)
- REDUCER (4)
- SCREW-ON ADAPTER (19)
- SHELL MILL ADAPTER (64)
- SHRINK FIT ADAPTER (93)
- SQUARE SHANK ADAPTER (17)
- TUNABLE SHELL MILL ADAPTER (6)
- WHISTLE DRIVE ADAPTER (1)
- WHISTLE NOTCH ADAPTER (20)
Clamp Style
Clamp Style
- D (41)
- M (33)
- N (28)
- P (35)
- S (35)
- X (3)
Cutting Width
Cutting Width
- 0.039 in(8)
- 0.047 in(8)
- 0.06 in(8)
- 0.062 in(8)
- 0.069 in(8)
- 0.073 in(8)
- 0.078 in(8)
- 0.079 in(8)
- 0.088 in(8)
- 0.089 in(4)
- 0.094 in(4)
- 0.095 in(8)
- 0.097 in(8)
- 0.098 in(8)
- 0.105 in(8)
- 0.108 in(8)
- 0.11 in(8)
- 0.119 in(14)
- 0.122 in(8)
- 0.125 in(14)
- 0.126 in(14)
- 0.128 in(8)
- 0.131 in(4)
- 0.138 in(14)
- 0.143 in(8)
- 0.156 in(8)
- 0.157 in(14)
- 0.167 in(14)
- 0.169 in(8)
- 0.177 in(14)
- 0.178 in(8)
- 0.185 in(11)
- 0.188 in(14)
- 0.189 in(14)
- 0.192 in(4)
- 0.193 in(4)
- 0.195 in(8)
- 0.196 in(8)
- 0.197 in(10)
- 0.202 in(6)
- 0.213 in(6)
- 0.217 in(6)
- 0.218 in(2)
- 0.219 in(6)
- 0.237 in(10)
- 0.25 in(12)
- 0.256 in(6)
- 0.276 in(4)
- 0.281 in(6)
- 0.312 in(6)
- 0.315 in(2)
- 0.345 in(4)
- 0.354 in(4)
- 0.375 in(6)
- 0.381 in(4)
- 0.384 in(2)
to
Cutting Width
Cutting Width
- 1.0 mm(8)
- 1.201 mm(8)
- 1.5 mm(8)
- 1.576 mm(8)
- 1.75 mm(8)
- 1.826 mm(8)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.2 mm(8)
- 2.225 mm(8)
- 2.25 mm(4)
- 2.375 mm(4)
- 2.401 mm(8)
- 2.475 mm(8)
- 2.5 mm(8)
- 2.676 mm(8)
- 2.75 mm(8)
- 2.801 mm(8)
- 3.0 mm(14)
- 3.1 mm(8)
- 3.176 mm(14)
- 3.2 mm(14)
- 3.25 mm(8)
- 3.325 mm(4)
- 3.5 mm(14)
- 3.6 mm(8)
- 3.95 mm(8)
- 3.975 mm(4)
- 4.0 mm(14)
- 4.25 mm(14)
- 4.3 mm(8)
- 4.5 mm(14)
- 4.525 mm(8)
- 4.7 mm(11)
- 4.775 mm(14)
- 4.801 mm(14)
- 4.875 mm(4)
- 4.9 mm(4)
- 4.95 mm(8)
- 4.976 mm(8)
- 5.0 mm(10)
- 5.125 mm(6)
- 5.4 mm(6)
- 5.5 mm(6)
- 5.525 mm(2)
- 5.575 mm(6)
- 6.0 mm(10)
- 6.351 mm(12)
- 6.5 mm(6)
- 7.0 mm(4)
- 7.125 mm(6)
- 7.926 mm(6)
- 8.0 mm(2)
- 8.75 mm(4)
- 9.0 mm(4)
- 9.525 mm(6)
- 9.675 mm(4)
- 9.75 mm(2)
to
Front End Type
Front End Type
- BTF - BTF (1)
- FDA - Milling Cutter Arbor (69)
- FLK - Flange Adapter Kenna (1)
- HTS - Deep Hole Index Drill (2)
- KMS - KM TBD System (2)
- KMT - KM Adapter (27)
- MCS - Modular Cartridge System (12)
- PMK - Prismatic Adapter Kenna (6)
- SPK-Holding Arbor-Spindle Head (6)
- SZK - Collet Taper (16)
- VKT - Square Shank (17)
- ZYL - Cylindrical Adapter (254)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (44)
- D-DIAMOND/RHOMBIC 55 (30)
- LT-TRIANGLE LAY DOWN THREAD 60 (12)
- R-ROUND (13)
- S-SQUARE 90 (14)
- T-TRIANGLE 60 (16)
- TN-TOP NOTCH (20)
- V-DIAMOND/RHOMBIC 35 (16)
- W-TRIGON 80 (10)
Front End Style
Front End Style
- BTF01 Standard BTF (1)
- FDA03 Longit &Transver Drive (5)
- FDA22 Transv Drive & SHCS (64)
- FLK32FlngMt 3&6Bolt 67&97DBC (1)
- HTS01 Standard HTS Shank (2)
- KMS-02 Englarged Flange OnCntr (2)
- KMT00 All KM, except 02,05,09 (23)
- KMT09 KM4X 4 ball connection (4)
- MCS01 Modular Deep Grooving (12)
- PMK02 Cutoff Sup Bld A1-A3 (6)
- SPK02 Bolt Circ Dia 101.6 mm (6)
- SZK02 Collets 8 Degree Taper (16)
- VKT01 Std Design (17)
- ZYL01 Straight Shank (168)
- ZYL03 Attachment Thread (19)
- ZYL10 Weldon Shank (44)
- ZYL13 2Deg-Whistle Notch (20)
- ZYL22 Boring Bar Shank (2)
- ZYL63 2Deg Surf w/Cyl.w/drive (1)
Insert Size
Insert Size
- 3 (8)
- 4 (6)
- 5 (3)
- 6 (3)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.209 in(1)
- 0.21 in(5)
- 0.294 in(4)
- 0.416 in(2)
- 1.299 in(1)
- 1.581 in(1)
- 1.974 in(1)
- 2.368 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 5.301 mm(1)
- 5.325 mm(5)
- 7.476 mm(4)
- 10.55 mm(2)
- 33.0 mm(1)
- 40.151 mm(1)
- 50.151 mm(1)
- 60.151 mm(1)
to
Gage Length
Gage Length
- 4 in(10)
- 6 in(8)
- 3 in(5)
- 2 in(2)
- 5 in(2)
- 13 in(1)
- 1.299 in(2)
- 1.379 in(2)
- 1.772 in(2)
- 1.782 in(2)
- 1.969 in(3)
- 2.071 in(3)
- 2.165 in(4)
- 2.244 in(2)
- 2.25 in(3)
- 2.283 in(2)
- 2.323 in(5)
- 2.362 in(9)
- 2.559 in(7)
- 2.571 in(2)
- 2.598 in(1)
- 2.648 in(1)
- 2.677 in(1)
- 2.697 in(2)
- 2.75 in(3)
- 2.757 in(1)
- 2.894 in(2)
- 2.953 in(3)
- 3.003 in(2)
- 3.15 in(25)
- 3.25 in(2)
- 3.307 in(5)
- 3.337 in(1)
- 3.346 in(12)
- 3.38 in(2)
- 3.426 in(2)
- 3.484 in(2)
- 3.5 in(3)
- 3.543 in(18)
- 3.583 in(1)
- 3.74 in(9)
- 3.75 in(7)
- 3.894 in(1)
- 3.938 in(31)
- 3.95 in(1)
- 4.134 in(5)
- 4.17 in(1)
- 4.25 in(4)
- 4.252 in(1)
- 4.258 in(1)
- 4.291 in(5)
- 4.331 in(5)
- 4.337 in(1)
- 4.5 in(1)
- 4.529 in(5)
- 4.604 in(1)
- 4.626 in(1)
- 4.724 in(31)
- 4.75 in(2)
- 4.882 in(2)
- 4.921 in(1)
- 4.968 in(1)
- 5.037 in(1)