PSC

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (264)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(264)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(264)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(264)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(264)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(264)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(264)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(264)
    • M Stainless Steel (264)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(264)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(264)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(264)
    • K Cast Iron (264)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(264)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(264)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(264)
    • N Non-Ferrous Materials (260)
      • N1
        Wrought Aluminum (260)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(260)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(183)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (260)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (260)
      • N6
        Carbon, Graphite Composites, CFRP (260)
      • N7
        MMC's (240)
    • S High-Temp Alloys (264)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(264)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(264)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(264)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(264)
    • H Hardened Materials (226)
      • H1
        Hardened Materials 44-48 HRC(226)
      • H2
        Hardened Materials 48-55 HRC(226)
      • H3
        Hardened Materials 56-60 HRC(200)
      • H4
        Hardened Materials >60 HRC(185)
    • C CFRP Materials (200)
      • C1
        CFRP, CFRP / CFRP (200)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (180)
    Applications
    Applications
    • Back BoringBack Boring (1)
    • FacingFacing (196)
    • GroovingGrooving (17)
    • ID FacingID Facing (174)
    • ID GroovingID Grooving (21)
    • ID Thread TurningID Thread Turning (25)
    • Multiple Direction CuttingMultiple Direction Cutting (212)
    • OD Thread TurningOD Thread Turning (7)
    • Plunge TurningPlunge Turning (57)
    • ProfilingProfiling (24)
    • TRN BoringTRN Boring (174)
    • TurningTurning (203)
    Type of Thread
    Type of Thread
    • 55 (26)
    • 60 (62)
    • ACME (58)
    • API (39)
    • API BUTTRESS (7)
    • API RD (41)
    • BSPT (19)
    • BSW (48)
    • BUTTRESS (36)
    • M (51)
    • NPT (41)
    • NPTF (19)
    • RD DIN 405 (26)
    • STUB ACME (48)
    • TR DIN 103 (26)
    • UN (55)
    • UNJ (41)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (237)
    • Lightly Interrupted Cut (238)
    • Smooth Cut (238)
    • Varying Depth of Cut (237)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (10)
    • 49.683 (1)
    • 62.233 (1)
    • 62.5 (3)
    • 72.5 (3)
    • 75.0 (18)
    • 90.0 (71)
    • 93.0 (65)
    • 95.0 (73)
    • 107.5 (21)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • PSC (171)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (178)
    • 2.0 (205)
    • 3.0 (33)
    • 4.0 (149)
    • 6.0 (9)
    • 8.0 (84)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(1)
    • 2.047 in(12)
    • 2.126 in(1)
    • 2.205 in(1)
    • 2.362 in(53)
    • 2.441 in(3)
    • 2.559 in(86)
    • 2.757 in(8)
    • 2.953 in(2)
    • 3.15 in(5)
    • 3.543 in(22)
    • 3.938 in(10)
    • 4.134 in(5)
    • 4.331 in(14)
    • 4.724 in(2)
    • 4.921 in(2)
    • 5.513 in(28)
    • 5.71 in(1)
    • 5.906 in(5)
    • 6.891 in(5)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(1)
    • 52.0 mm(12)
    • 54.0 mm(1)
    • 56.0 mm(1)
    • 60.0 mm(53)
    • 62.0 mm(3)
    • 65.0 mm(86)
    • 70.0 mm(8)
    • 75.0 mm(2)
    • 80.0 mm(5)
    • 90.0 mm(22)
    • 100.0 mm(10)
    • 105.0 mm(5)
    • 110.0 mm(14)
    • 120.0 mm(2)
    • 125.0 mm(2)
    • 140.0 mm(28)
    • 145.0 mm(1)
    • 150.0 mm(5)
    • 175.0 mm(5)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.0 in(10)
    • 0.001 in(24)
    • 0.002 in(76)
    • 0.003 in(55)
    • 0.004 in(176)
    • 0.005 in(25)
    • 0.006 in(49)
    • 0.007 in(37)
    • 0.008 in(171)
    • 0.01 in(37)
    • 0.011 in(26)
    • 0.012 in(27)
    • 0.014 in(66)
    • 0.015 in(2)
    • 0.016 in(193)
    • 0.017 in(7)
    • 0.019 in(32)
    • 0.02 in(27)
    • 0.021 in(4)
    • 0.023 in(32)
    • 0.024 in(7)
    • 0.028 in(8)
    • 0.03 in(6)
    • 0.031 in(219)
    • 0.035 in(32)
    • 0.037 in(10)
    • 0.039 in(29)
    • 0.047 in(215)
    • 0.049 in(26)
    • 0.055 in(2)
    • 0.06 in(28)
    • 0.062 in(55)
    • 0.063 in(177)
    • 0.069 in(26)
    • 0.078 in(22)
    • 0.079 in(32)
    • 0.089 in(32)
    • 0.094 in(28)
    • 0.095 in(75)
    • 0.098 in(10)
    • 0.125 in(10)
    • 0.126 in(25)
    • 0.157 in(8)
    • 0.197 in(1)
    • 0.237 in(2)
    • 0.25 in(2)
    • 0.313 in(2)
    • 0.315 in(2)
    • 0.394 in(2)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(10)
    • 0.025 mm(24)
    • 0.05 mm(76)
    • 0.076 mm(55)
    • 0.1 mm(176)
    • 0.125 mm(25)
    • 0.151 mm(49)
    • 0.176 mm(37)
    • 0.2 mm(171)
    • 0.225 mm(24)
    • 0.25 mm(37)
    • 0.275 mm(26)
    • 0.301 mm(27)
    • 0.325 mm(34)
    • 0.351 mm(64)
    • 0.375 mm(2)
    • 0.4 mm(193)
    • 0.426 mm(7)
    • 0.45 mm(32)
    • 0.476 mm(10)
    • 0.5 mm(27)
    • 0.525 mm(4)
    • 0.576 mm(32)
    • 0.601 mm(7)
    • 0.701 mm(8)
    • 0.75 mm(6)
    • 0.775 mm(26)
    • 0.8 mm(193)
    • 0.9 mm(32)
    • 0.925 mm(10)
    • 1.0 mm(29)
    • 1.201 mm(215)
    • 1.25 mm(26)
    • 1.401 mm(2)
    • 1.5 mm(26)
    • 1.526 mm(2)
    • 1.576 mm(55)
    • 1.6 mm(177)
    • 1.75 mm(26)
    • 1.975 mm(22)
    • 2.0 mm(32)
    • 2.25 mm(32)
    • 2.375 mm(28)
    • 2.401 mm(75)
    • 2.5 mm(10)
    • 3.176 mm(10)
    • 3.2 mm(25)
    • 4.0 mm(8)
    • 5.0 mm(1)
    • 6.0 mm(2)
    • 6.351 mm(2)
    • 7.95 mm(2)
    • 8.0 mm(2)
    • 10.0 mm(2)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (118)
    • 241 (33)
    • AC5 (4)
    • CG4 (2)
    • CL4 (90)
    • CM2 (111)
    • CM3 (94)
    • CM4 (54)
    • CM5 (6)
    • CPX (120)
    • CW2 (65)
    • CW2015 (114)
    • CW5025 (124)
    • GH1 (5)
    • GX (58)
    • HCK10 (18)
    • HCK20 (8)
    • HK1500 (121)
    • HK35 (10)
    • HT2 (114)
    • HTX (72)
    • HWK15 (18)
    • K00326 (7)
    • K00331 (10)
    • K060 (48)
    • K090 (127)
    • K1 (52)
    • K1010P (5)
    • K10M (162)
    • K10P (131)
    • K10U (128)
    • K15 (17)
    • K15U (128)
    • K20K (147)
    • K21 (56)
    • K25M (145)
    • K25P (139)
    • K2885 (26)
    • K313 (232)
    • K35P (79)
    • K420 (137)
    • K45 (54)
    • K4H (23)
    • K6 (1)
    • K68 (224)
    • K8735 (7)
    • KB1340 (47)
    • KB1345 (93)
    • KB1610 (94)
    • KB1625 (78)
    • KB1630 (94)
    • KB5610 (90)
    • KB5625 (109)
    • KB5630 (83)
    • KB9610 (126)
    • KB9640 (56)
    • KBH10 (128)
    • KBH10B (82)
    • KBH20 (142)
    • KBH20B (82)
    • KBK35 (33)
    • KC210 (99)
    • KC250 (117)
    • KC5010 (252)
    • KC5020P (27)
    • KC5025 (258)
    • KC5410 (214)
    • KC5510 (144)
    • KC5525 (95)
    • KC710 (85)
    • KC720 (191)
    • KC722 (79)
    • KC730 (223)
    • KC7310 (153)
    • KC732 (150)
    • KC8050 (202)
    • KC810 (228)
    • KC850 (234)
    • KC9010 (160)
    • KC9025 (195)
    • KC910 (207)
    • KC9105 (182)
    • KC9110 (237)
    • KC9120 (188)
    • KC9125 (201)
    • KC9125RR (4)
    • KC9140 (148)
    • KC9145 (134)
    • KC9210 (32)
    • KC9215 (146)
    • KC9225 (193)
    • KC9240 (190)
    • KC9240NEW (190)
    • KC9245 (146)
    • KC9315 (202)
    • KC9320 (224)
    • KC9325 (163)
    • KC935 (231)
    • KC950 (211)
    • KC990 (162)
    • KCD25 (57)
    • KCK05 (194)
    • KCK05B (173)
    • KCK15 (186)
    • KCK15B (199)
    • KCK20 (223)
    • KCK20B (226)
    • KCM15 (185)
    • KCM15B (182)
    • KCM25 (197)
    • KCM25B (185)
    • KCM25S (14)
    • KCM35 (171)
    • KCM35B (130)
    • KCP05 (168)
    • KCP05B (132)
    • KCP10 (200)
    • KCP10B (237)
    • KCP15 (19)
    • KCP20S (14)
    • KCP25 (201)
    • KCP25B (237)
    • KCP25C (202)
    • KCP30 (192)
    • KCP30B (144)
    • KCP40 (126)
    • KCP40B (157)
    • KCPK05 (148)
    • KCS10 (79)
    • KCS10B (193)
    • KCS25S (14)
    • KCU10 (238)
    • KCU10B (236)
    • KCU25 (234)
    • KCU25B (230)
    • KD050 (99)
    • KD081 (111)
    • KD100 (103)
    • KD120 (94)
    • KD1400 (92)
    • KD1405 (69)
    • KD1425 (121)
    • KM1 (47)
    • KMF (33)
    • KN10S (16)
    • KS15 (40)
    • KT1120 (32)
    • KT125 (98)
    • KT150 (61)
    • KT175 (147)
    • KT315 (190)
    • KT325 (114)
    • KT5020 (6)
    • KTP10 (140)
    • KTP25S (124)
    • KU10 (35)
    • KU10T (180)
    • KU25T (46)
    • KU30T (221)
    • KY1310 (75)
    • KY1320 (124)
    • KY1540 (59)
    • KY1615 (122)
    • KY2000 (76)
    • KY2100 (48)
    • KY3000 (157)
    • KY3400 (94)
    • KY3500 (132)
    • KY4000 (60)
    • KY4300 (72)
    • KY4400 (123)
    • KYHK15B (123)
    • KYK10 (55)
    • KYK25 (86)
    • KYK35 (132)
    • KYS25 (59)
    • KYS30 (66)
    • MC2 (4)
    • NL200 (65)
    • NL250 (142)
    • NL300 (114)
    • NL400 (68)
    • NL920 (106)
    • P25 (54)
    • PB100 (38)
    • PB170 (37)
    • PB250 (42)
    • PB300 (33)
    • PD100 (18)
    • PD50 (10)
    • PN120 (2)
    • PS5 (75)
    • SP0819 (111)
    • SP0A00 (4)
    • SP0PW3 (4)
    • SP3019 (80)
    • SP4019 (89)
    • SP4036 (6)
    • SP4066 (7)
    • SP4093 (6)
    • SP61EJ (4)
    • SPADAP (19)
    • SPN3W1 (8)
    • SPN4W2 (8)
    • SPSREJ (3)
    • THM (122)
    • THM-X (86)
    • THMF-X (37)
    • TN10P (201)
    • TN10U (132)
    • TN15M (172)
    • TN15U (128)
    • TN2000 (133)
    • TN20K (175)
    • TN20P (187)
    • TN30M (182)
    • TN30P (126)
    • TN4000 (124)
    • TN5015 (152)
    • TN5020 (162)
    • TN5105 (114)
    • TN5120 (175)
    • TN6010 (135)
    • TN6025 (151)
    • TN7005 (127)
    • TN7010 (178)
    • TN7015 (178)
    • TN7025 (178)
    • TN7035 (155)
    • TN7105 (124)
    • TN7110 (203)
    • TN7115 (175)
    • TN7125 (167)
    • TN7135 (157)
    • TN8025 (153)
    • TTI15 (109)
    • TTM (8)
    • TTM09 (15)
    • TTR (55)
    • TTR-X (8)
    • TTS (98)
    • TTX (98)
    • W00342 (18)
    • WBH10C (125)
    • WBH10P (83)
    • WBH10U (94)
    • WBH20P (111)
    • WBH25P (87)
    • WBH25U (105)
    • WBH30P (83)
    • WBK40U (47)
    • WBK45U (93)
    • WDN00U (52)
    • WDN25U (92)
    • WK05CT (164)
    • WK15CT (117)
    • WK20CT (188)
    • WM15CT (183)
    • WM25CT (183)
    • WM35CT (144)
    • WP05CT (40)
    • WP15CT (190)
    • WP20TT (15)
    • WP25CT (190)
    • WP35CT (188)
    • WS10PT (158)
    • WS25PT (157)
    • WU05PT (18)
    • WU10HT (185)
    • WU10PT (143)
    • WU25PT (143)
    • X00511 (33)
    • X00580 (33)
    • X00581 (33)
    • X00582 (33)
    • X00583 (33)
    • X00584 (33)
    • X00585 (33)
    • X00586 (33)
    • X00591 (33)
    • X00592 (33)
    • X00593 (33)
    • X00594 (33)
    • X00596 (33)
    • X00597 (33)
    • X00599 (33)
    Hand Of Tool
    Hand Of Tool
    • L (75)
    • N (12)
    • R (84)
    Wiper Insert
    Wiper Insert
    • N (264)
    • Y (105)
    F Dimension
    F Dimension
    • 0.0 mm(10)
    • 5.0 mm(1)
    • 6.0 mm(1)
    • 11.0 mm(4)
    • 12.0 mm(2)
    • 13.0 mm(7)
    • 14.0 mm(3)
    • 17.0 mm(25)
    • 18.0 mm(2)
    • 22.0 mm(23)
    • 27.0 mm(34)
    • 32.0 mm(1)
    • 35.0 mm(35)
    • 43.0 mm(2)
    • 45.0 mm(21)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(10)
    • 0.197 in(1)
    • 0.237 in(1)
    • 0.433 in(4)
    • 0.473 in(2)
    • 0.512 in(7)
    • 0.551 in(3)
    • 0.669 in(25)
    • 0.709 in(2)
    • 0.866 in(23)
    • 1.063 in(34)
    • 1.26 in(1)
    • 1.379 in(35)
    • 1.693 in(2)
    • 1.772 in(21)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(7)
    • 20.0 mm(6)
    • 24.0 mm(2)
    • 24.5 mm(1)
    • 25.0 mm(7)
    • 32.0 mm(21)
    • 33.0 mm(3)
    • 33.5 mm(1)
    • 34.0 mm(2)
    • 38.5 mm(4)
    • 40.0 mm(19)
    • 41.301 mm(4)
    • 47.6 mm(4)
    • 48.0 mm(3)
    • 48.5 mm(3)
    • 50.0 mm(23)
    • 52.5 mm(1)
    • 53.0 mm(1)
    • 57.2 mm(3)
    • 62.0 mm(3)
    • 63.0 mm(12)
    • 64.0 mm(2)
    • 65.0 mm(6)
    • 65.5 mm(1)
    • 66.0 mm(1)
    • 80.0 mm(2)
    • 81.0 mm(3)
    • 88.9 mm(4)
    • 90.0 mm(7)
    • 100.0 mm(2)
    • 110.0 mm(58)
    • 125.0 mm(21)
    • 139.701 mm(4)
    • 165.0 mm(1)
    • 174.601 mm(4)
    • 209.601 mm(3)
    • 215.0 mm(2)
    • 222.3 mm(3)
    • 223.0 mm(2)
    • 510.0 mm(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(7)
    • 0.787 in(6)
    • 0.946 in(2)
    • 0.965 in(1)
    • 0.984 in(7)
    • 1.26 in(21)
    • 1.299 in(3)
    • 1.319 in(1)
    • 1.339 in(2)
    • 1.516 in(4)
    • 1.575 in(19)
    • 1.627 in(4)
    • 1.874 in(4)
    • 1.891 in(3)
    • 1.909 in(3)
    • 1.969 in(23)
    • 2.067 in(1)
    • 2.087 in(1)
    • 2.253 in(3)
    • 2.441 in(3)
    • 2.48 in(12)
    • 2.52 in(2)
    • 2.559 in(6)
    • 2.579 in(1)
    • 2.598 in(1)
    • 3.15 in(2)
    • 3.189 in(3)
    • 3.5 in(4)
    • 3.543 in(7)
    • 3.938 in(2)
    • 4.331 in(58)
    • 4.921 in(21)
    • 5.5 in(4)
    • 6.496 in(1)
    • 6.875 in(4)
    • 8.252 in(3)
    • 8.465 in(2)
    • 8.752 in(3)
    • 8.78 in(2)
    • 20.079 in(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(36)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(36)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (47)
    • E (51)
    • P (1)
    • S (72)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (87)
    • NEGATIVE-ZERO (31)
    • NEUTRAL (ZERO) (30)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.417 in(3)
    • 1.655 in(2)
    • 1.811 in(3)
    • 1.85 in(2)
    • 1.891 in(2)
    • 1.969 in(1)
    • 2.008 in(1)
    • 2.047 in(10)
    • 2.126 in(1)
    • 2.205 in(5)
    • 2.362 in(34)
    • 2.441 in(4)
    • 2.512 in(2)
    • 2.52 in(5)
    • 2.525 in(1)
    • 2.559 in(50)
    • 2.598 in(5)
    • 2.638 in(10)
    • 2.835 in(2)
    • 2.914 in(3)
    • 3.15 in(6)
    • 3.281 in(2)
    • 3.307 in(4)
    • 3.465 in(6)
    • 3.48 in(1)
    • 3.701 in(2)
    • 3.91 in(2)
    • 3.938 in(2)
    • 4.158 in(2)
    • 4.339 in(1)
    • 4.37 in(1)
    • 4.371 in(1)
    • 4.449 in(3)
    • 4.488 in(4)
    • 4.493 in(2)
    • 4.529 in(4)
    • 4.532 in(2)
    • 4.646 in(2)
    • 4.686 in(4)
    • 4.724 in(1)
    • 5.906 in(5)
    • 5.984 in(5)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 36.0 mm(3)
    • 42.0 mm(2)
    • 46.0 mm(3)
    • 47.0 mm(2)
    • 48.0 mm(2)
    • 50.0 mm(1)
    • 51.0 mm(1)
    • 52.0 mm(10)
    • 54.0 mm(1)
    • 56.0 mm(5)
    • 60.0 mm(34)
    • 62.0 mm(4)
    • 63.801 mm(2)
    • 64.0 mm(5)
    • 64.125 mm(1)
    • 65.0 mm(50)
    • 66.0 mm(5)
    • 67.0 mm(10)
    • 72.0 mm(2)
    • 74.0 mm(3)
    • 80.0 mm(6)
    • 83.301 mm(2)
    • 84.0 mm(4)
    • 88.0 mm(6)
    • 88.4 mm(1)
    • 94.0 mm(2)
    • 99.325 mm(2)
    • 100.0 mm(2)
    • 105.601 mm(2)
    • 110.2 mm(1)
    • 111.0 mm(1)
    • 111.025 mm(1)
    • 113.0 mm(3)
    • 114.0 mm(4)
    • 114.125 mm(2)
    • 115.0 mm(4)
    • 115.101 mm(2)
    • 118.0 mm(2)
    • 119.0 mm(4)
    • 120.0 mm(1)
    • 150.0 mm(5)
    • 152.0 mm(5)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (123)
    Front-End
    Adapter Front-End
    Adapter Front-End
    • BORING BAR ADAPTER (4)
    • CARTRIDGE MOUNT (8)
    • END MILL ADAPTER (16)
    • ER COLLET CHUCK (14)
    • EXTENSION (5)
    • HYDRAULIC CHUCK (18)
    • HYDRAULIC CHUCK-HIGH TORQUE (4)
    • KM MODULAR ADAPTER (12)
    • MODULAR ADAPTER (6)
    • RC TAP CHUCK ADAPTER-T & C (4)
    • REDUCER (2)
    • SHELL MILL ADAPTER (12)
    • SHRINK FIT ADAPTER (16)
    • SQUARE SHANK ADAPTER (19)
    • WHISTLE DRIVE ADAPTER (1)
    • WHISTLE NOTCH ADAPTER (11)
    Clamp Style
    Clamp Style
    • D (97)
    • N (44)
    • P (65)
    • S (60)
    Cutting Width
    Cutting Width
    • 0.02 in(4)
    • 0.031 in(4)
    • 0.035 in(4)
    • 0.039 in(26)
    • 0.041 in(4)
    • 0.047 in(26)
    • 0.055 in(4)
    • 0.058 in(4)
    • 0.06 in(26)
    • 0.062 in(26)
    • 0.067 in(4)
    • 0.069 in(26)
    • 0.073 in(22)
    • 0.077 in(4)
    • 0.078 in(22)
    • 0.079 in(26)
    • 0.088 in(26)
    • 0.089 in(16)
    • 0.094 in(10)
    • 0.095 in(26)
    • 0.097 in(22)
    • 0.098 in(26)
    • 0.105 in(22)
    • 0.108 in(26)
    • 0.11 in(22)
    • 0.119 in(36)
    • 0.122 in(22)
    • 0.125 in(36)
    • 0.126 in(36)
    • 0.128 in(26)
    • 0.129 in(4)
    • 0.131 in(10)
    • 0.138 in(36)
    • 0.143 in(22)
    • 0.147 in(3)
    • 0.15 in(1)
    • 0.151 in(3)
    • 0.152 in(4)
    • 0.156 in(22)
    • 0.157 in(32)
    • 0.167 in(32)
    • 0.169 in(22)
    • 0.177 in(32)
    • 0.178 in(22)
    • 0.185 in(28)
    • 0.188 in(32)
    • 0.189 in(32)
    • 0.192 in(10)
    • 0.193 in(10)
    • 0.195 in(22)
    • 0.196 in(22)
    • 0.197 in(10)
    • 0.202 in(10)
    • 0.213 in(10)
    • 0.217 in(10)
    • 0.219 in(10)
    • 0.237 in(10)
    • 0.25 in(10)
    • 0.256 in(10)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(4)
    • 0.775 mm(4)
    • 0.8 mm(4)
    • 0.9 mm(4)
    • 1.0 mm(26)
    • 1.05 mm(4)
    • 1.201 mm(26)
    • 1.401 mm(4)
    • 1.475 mm(4)
    • 1.5 mm(26)
    • 1.576 mm(26)
    • 1.701 mm(4)
    • 1.75 mm(26)
    • 1.826 mm(22)
    • 1.951 mm(4)
    • 1.975 mm(22)
    • 2.0 mm(26)
    • 2.2 mm(26)
    • 2.225 mm(26)
    • 2.25 mm(16)
    • 2.375 mm(10)
    • 2.401 mm(26)
    • 2.475 mm(22)