successfully added to cart
View Cart

Notifications

Mark all as read

External Machining

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1826)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1815)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1815)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1815)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1815)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1815)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1826)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1826)
  • M Stainless Steel (1821)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1821)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1821)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1821)
  • K Cast Iron (1891)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1891)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1885)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1867)
  • N Non-Ferrous Materials (1773)
    • N1
      Wrought Aluminum
      (1712)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1701)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (873)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1757)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1695)
    • N6
      Carbon, Graphite Composites, CFRP
      (1454)
    • N7
      MMC's
      (1695)
  • S High-Temp Alloys (1894)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1883)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1889)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1886)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1810)
  • H Hardened Materials (1566)
    • H1
      Hardened Materials 44-48 HRC
      (1566)
    • H2
      Hardened Materials 48-55 HRC
      (1557)
    • H3
      Hardened Materials 56-60 HRC
      (1557)
    • H4
      Hardened Materials >60 HRC
      (1170)
Select First Choice
  • CN (110)
  • DE (108)
  • GB (54)
  • IN (2)
  • SG (15)
  • US (136)
Applications
Applications
  • Chamfer Turning Chamfer Turning (49)
  • Facing Facing (1223)
  • ID Facing ID Facing (2)
  • Multiple Direction Cutting Multiple Direction Cutting (1288)
  • Plunge Turning Plunge Turning (55)
  • Profiling Profiling (1168)
  • TRN Boring TRN Boring (342)
  • Turning Turning (1781)
Type of Thread
Type of Thread
  • 60 (1)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1827)
  • Interrupted (1015)
  • Lightly Interrupted Cut (1856)
  • Smooth Cut (1871)
  • Varying Depth of Cut (1847)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (198)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (16)
  • 62.5 (27)
  • 63.0 (19)
  • 72.5 (25)
  • 75.0 (291)
  • 85.0 (7)
  • 90.0 (351)
  • 91.0 (1)
  • 93.0 (448)
  • 95.0 (392)
  • 97.5 (1)
  • 105.0 (1)
  • 107.5 (90)
  • 117.5 (14)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (264)
  • Toolholder (1323)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (1079)
  • 2.0 (1077)
  • 3.0 (306)
  • 4.0 (1171)
  • 6.0 (270)
  • 8.0 (738)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (55)
  • 0.001 in (59)
  • 0.0011 in (43)
  • 0.0015 in (272)
  • 0.004 in (985)
  • 0.0078 in (13)
  • 0.0079 in (34)
  • 0.008 in (938)
  • 0.0083 in (165)
  • 0.013 in (123)
  • 0.0155 in (20)
  • 0.0156 in (1464)
  • 0.0158 in (14)
  • 0.016 in (881)
  • 0.031 in (1137)
  • 0.0311 in (46)
  • 0.0312 in (1190)
  • 0.0313 in (1722)
  • 0.0315 in (72)
  • 0.0468 in (122)
  • 0.0469 in (1579)
  • 0.047 in (1043)
  • 0.0472 in (52)
  • 0.0487 in (12)
  • 0.0516 in (52)
  • 0.0623 in (84)
  • 0.0625 in (1209)
  • 0.063 in (905)
  • 0.0781 in (7)
  • 0.0787 in (7)
  • 0.0928 in (7)
  • 0.0938 in (665)
  • 0.094 in (288)
  • 0.1181 in (13)
  • 0.125 in (165)
  • 0.126 in (142)
  • 0.1563 in (183)
  • 0.157 in (3)
  • 0.1575 in (68)
  • 0.1875 in (48)
  • 0.189 in (3)
  • 0.1969 in (77)
  • 0.197 in (9)
  • 0.236 in (80)
  • 0.2362 in (27)
  • 0.25 in (92)
  • 0.312 in (123)
  • 0.3125 in (18)
  • 0.315 in (5)
  • 0.375 in (20)
  • 0.3935 in (4)
  • 0.3937 in (4)
  • 0.492 in (2)
  • 0.4922 in (6)
  • 0.5 in (15)
  • 0.6299 in (2)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (55)
  • 0.03 mm (102)
  • 0.038 mm (272)
  • 0.1 mm (862)
  • 0.102 mm (377)
  • 0.2 mm (938)
  • 0.203 mm (600)
  • 0.34 mm (123)
  • 0.394 mm (20)
  • 0.397 mm (1198)
  • 0.4 mm (1462)
  • 0.406 mm (74)
  • 0.6 mm (63)
  • 0.703 mm (19)
  • 0.79 mm (132)
  • 0.791 mm (46)
  • 0.792 mm (288)
  • 0.794 mm (1192)
  • 0.795 mm (19)
  • 0.8 mm (1722)
  • 1.188 mm (122)
  • 1.19 mm (165)
  • 1.191 mm (1153)
  • 1.194 mm (7)
  • 1.2 mm (1579)
  • 1.587 mm (165)
  • 1.588 mm (777)
  • 1.6 mm (1214)
  • 1.984 mm (7)
  • 2.0 mm (7)
  • 2.38 mm (84)
  • 2.381 mm (112)
  • 2.4 mm (598)
  • 3.0 mm (13)
  • 3.175 mm (44)
  • 3.18 mm (66)
  • 3.2 mm (263)
  • 4.0 mm (71)
  • 4.76 mm (13)
  • 4.7625 mm (48)
  • 4.8 mm (3)
  • 5.0 mm (77)
  • 6.0 mm (80)
  • 6.35 mm (92)
  • 7.9375 mm (13)
  • 7.94 mm (3)
  • 8.0 mm (5)
  • 9.525 mm (20)
  • 10.0 mm (4)
  • 12.5 mm (6)
  • 12.7 mm (15)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (953)
  • CM2 (907)
  • CM3 (798)
  • CPX (890)
  • K090 (1229)
  • K10M (1310)
  • K10P (1156)
  • K10U (1116)
  • K15U (1091)
  • K20K (1313)
  • K25M (1111)
  • K25P (1140)
  • K313 (1706)
  • K420 (994)
  • K68 (1580)
  • KB1610 (848)
  • KB9610 (998)
  • KBH10 (987)
  • KBH20 (1006)
  • KC5010 (1765)
  • KC5025 (1568)
  • KC5410 (1418)
  • KC5510 (1174)
  • KC720 (1248)
  • KC730 (1547)
  • KC7310 (1259)
  • KC732 (1210)
  • KC8050 (1769)
  • KC810 (1662)
  • KC850 (1756)
  • KC9010 (1401)
  • KC9025 (1696)
  • KC910 (1620)
  • KC9105 (1445)
  • KC9110 (1738)
  • KC9120 (1517)
  • KC9125 (1673)
  • KC9140 (1267)
  • KC9145 (1065)
  • KC9215 (1178)
  • KC9225 (1541)
  • KC9240 (1622)
  • KC9240NEW (1615)
  • KC9245 (1181)
  • KC9315 (1705)
  • KC9320 (1563)
  • KC9325 (1423)
  • KC935 (1675)
  • KC950 (1529)
  • KC990 (1572)
  • KCK05 (1543)
  • KCK05B (1337)
  • KCK15 (1492)
  • KCK15B (1573)
  • KCK20 (1601)
  • KCK20B (1605)
  • KCM15 (1507)
  • KCM15B (1377)
  • KCM25 (1602)
  • KCM25B (1531)
  • KCM35 (1380)
  • KCM35B (1001)
  • KCP05 (1324)
  • KCP05B (918)
  • KCP10 (1646)
  • KCP10B (1648)
  • KCP25 (1692)
  • KCP25B (1717)
  • KCP30 (1649)
  • KCP30B (1136)
  • KCP40 (1033)
  • KCP40B (1118)
  • KCPK05 (1088)
  • KCS10B (1396)
  • KCU10 (1736)
  • KCU25 (1560)
  • KD050 (815)
  • KD081 (786)
  • KD1425 (830)
  • KT125 (880)
  • KT175 (1107)
  • KT315 (1276)
  • KU10T (1233)
  • KU30T (1564)
  • KY1310 (788)
  • KY1320 (1099)
  • KY1615 (1180)
  • KY3000 (1150)
  • KY3400 (968)
  • KY3500 (1229)
  • KY4400 (1110)
  • KYHK15B (1151)
  • KYK25 (896)
  • KYK35 (1189)
  • NL250 (1159)
  • NL300 (877)
  • NL920 (987)
  • SP0819 (839)
  • SP3019 (926)
  • SP4019 (816)
Hand Of Tool
Hand Of Tool
  • L (638)
  • N (209)
  • R (741)
Wiper Insert
Wiper Insert
  • N (1903)
  • Y (1024)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 16.0 mm (1)
  • 40.0 mm (4)
  • 44.0 mm (12)
  • 50.0 mm (32)
  • 54.0 mm (30)
  • 60.0 mm (2)
  • 63.0 mm (16)
  • 70.0 mm (38)
  • 74.0 mm (4)
  • 80.0 mm (51)
  • 86.0 mm (68)
  • 90.0 mm (6)
  • 94.0 mm (2)
  • 100.0 mm (37)
  • 104.0 mm (2)
  • 106.0 mm (31)
  • 118.0 mm (2)
  • 120.0 mm (2)
  • 130.0 mm (2)
  • 150.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.63 in (1)
  • 1.575 in (4)
  • 1.732 in (11)
  • 1.7323 in (1)
  • 1.969 in (32)
  • 2.126 in (30)
  • 2.362 in (2)
  • 2.48 in (16)
  • 2.756 in (38)
  • 2.913 in (4)
  • 3.15 in (51)
  • 3.386 in (68)
  • 3.543 in (6)
  • 3.701 in (2)
  • 3.937 in (37)
  • 4.094 in (2)
  • 4.173 in (31)
  • 4.6457 in (1)
  • 4.646 in (1)
  • 4.724 in (2)
  • 5.118 in (2)
  • 5.906 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (293)
  • E (233)
  • S (1062)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (867)
  • DOUBLE POSITIVE (36)
  • NEGATIVE-ZERO (156)
  • NEUTRAL (ZERO) (397)
  • POSITIVE-ZERO (65)
Maximum Bore Depth
Maximum Bore Depth
  • 1.378 in (20)
  • 1.575 in (65)
  • 1.772 in (16)
  • 1.88 in (1)
  • 1.969 in (90)
  • 2.165 in (1)
  • 2.362 in (102)
  • 2.3622 in (1)
  • 2.756 in (39)
  • 4.528 in (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (20)
  • 40.0 mm (65)
  • 45.0 mm (16)
  • 48.0 mm (1)
  • 50.0 mm (90)
  • 55.0 mm (1)
  • 60.0 mm (103)
  • 70.0 mm (39)
  • 115.0 mm (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (13)
Front-End
Clamp Style
Clamp Style
  • C (166)
  • D (264)
  • M (712)
  • N (35)
  • P (307)
  • S (408)
  • W (8)
  • X (15)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (495)
  • D-DIAMOND/RHOMBIC 55 (385)
  • E-DIAMOND/RHOMBIC 75 (1)
  • R-ROUND (161)
  • S-SQUARE 90 (321)
  • T-TRIANGLE 60 (261)
  • V-DIAMOND/RHOMBIC 35 (192)
  • W-TRIGON 80 (99)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.25 in (3)
  • 0.2756 in (3)
  • 0.3091 in (2)
  • 0.315 in (2)
  • 0.4 in (2)
  • 0.41 in (1)
  • 0.43 in (2)
  • 0.4646 in (2)
  • 0.4724 in (1)
  • 0.4776 in (2)
  • 0.5008 in (2)
  • 0.62 in (1)
  • 0.6299 in (5)
  • 0.748 in (1)
  • 0.75 in (4)
  • 0.7874 in (4)
  • 0.81 in (3)
  • 0.9449 in (2)
  • 0.9843 in (4)
  • 1.0 in (15)
  • 1.02 in (4)
  • 1.13 in (1)
  • 1.1417 in (1)
  • 1.25 in (3)
  • 1.2598 in (1)
  • 1.2992 in (2)
  • 1.38 in (5)
  • 1.4961 in (2)
  • 1.5 in (4)
  • 1.5807 in (2)
  • 1.863 in (1)
  • 1.875 in (2)
  • 2.323 in (1)
  • 2.364 in (1)
  • 2.374 in (1)
  • 3.0709 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 6.35 mm (3)
  • 7.0 mm (3)
  • 7.85 mm (2)
  • 8.0 mm (2)
  • 10.16 mm (2)
  • 10.414 mm (1)
  • 10.922 mm (2)
  • 11.8 mm (2)
  • 12.0 mm (1)
  • 12.13 mm (2)
  • 12.72 mm (2)
  • 15.88 mm (1)
  • 16.0 mm (5)
  • 19.0 mm (1)
  • 19.05 mm (4)
  • 20.0 mm (4)
  • 20.574 mm (3)
  • 24.0 mm (2)
  • 25.0 mm (4)
  • 25.4 mm (15)
  • 25.908 mm (4)
  • 28.702 mm (1)
  • 29.0 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (1)
  • 33.0 mm (2)
  • 35.051 mm (1)
  • 35.052 mm (4)
  • 38.0 mm (2)
  • 38.1 mm (4)
  • 40.15 mm (2)
  • 47.32 mm (1)
  • 47.625 mm (2)
  • 59.004 mm (1)
  • 60.046 mm (1)
  • 60.3 mm (1)
  • 78.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (1211)
  • B L (1144)
  • C A (1354)
  • C N (1302)
  • D P (998)
  • H T (1396)
  • H W (1843)
Back-End
Connection Type
Connection Type
  • SQUARE SHANK (1323)
  • TAPER SHANK (264)
System Size
System Size
  • KM32 (15)
  • KM32TS (6)
  • KM40TS (67)
  • KM50TS (57)
  • KM63TS (79)
  • KM63UT (1)
  • KM80TS (39)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (1)
  • 32.0 mm (41)
  • 40.0 mm (148)
  • 50.0 mm (150)
  • 63.0 mm (186)
  • 80.0 mm (66)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.47 in (1)
  • 1.2598 in (40)
  • 1.26 in (1)
  • 1.5748 in (146)
  • 1.575 in (2)
  • 1.9685 in (149)
  • 1.969 in (1)
  • 2.48 in (6)
  • 2.4803 in (180)
  • 3.1496 in (66)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Screw-On Toolholders

Screw-On Inserts
(1 Products)
  • TurningTurning
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert Shim Screw ID Drive Size Insert Screw ID Drive Size
1097867 SSBCR2525M12 SSBCR2525M12   25.0000 .9843 25.0000 .9843 22.0000 .8661 150.0000 5.905 21.0000 .8268 3.0610 .1205 SC..120408 4 mm T15
    List price:
    $102.10 /each.
    Your price::
    Qty
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor
    Qty

    Sold in pkg. of

    ORIGINAL PRODUCT

    Screw-On Toolholders

    Screw-On Inserts
    (3 Products)
    • TurningTurning
    • ProfilingProfiling
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Shim Screw ID Drive Size Insert Screw ID Drive Size
    1098005 SSDCN1212N09 SSDCN1212N09   12.0000 .4724 12.0000 .4724 6.0000 .2362 160.0000 6.299 18.0000 .7087 SC..09T308   T15
      List price:
      $86.67 /each.
      Your price::
      Qty
      1098006 SSDCN1616H09 SSDCN1616H09 16.0000 .6299 16.0000 .6299 8.0000 .3150 100.0000 3.937 18.0000 .7087 SC..09T308 3.5 mm T15  
        List price:
        $93.49 /each.
        Your price::
        Qty
        1098007 SSDCN2020K09 SSDCN2020K09 20.0000 .7874 20.0000 .7874 10.0000 .3937 125.0000 4.921 18.0000 .7087 SC..09T308 3.5 mm T15  
          List price:
          $97.91 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Kenclamp™ Toolholders

          Kenloc™ Inserts
          (23 Products)
          • TurningTurning
          • ProfilingProfiling
          • FacingFacing
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B3] Head Back Offset [B3] Head Back Offset Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
          1875135 DCLNL164CKC3 DCLNL164CKC3 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP  
            List price:
            $106.16 /each.
            Your price::
            Qty
            1875133 DCLNL164DKC3 DCLNL164DKC3 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP  
              List price:
              $107.38 /each.
              Your price::
              Qty
              1875137 DCLNR124BKC3 DCLNR124BKC3 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 31.7500 1.250 3.8100 .1500 CN..432 15 IP 15 IP 15 IP  
                List price:
                $101.12 /each.
                Your price::
                Qty
                1875134 DCLNR164CKC3 DCLNR164CKC3 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP  
                  List price:
                  $106.99 /each.
                  Your price::
                  Qty
                  1874862 DCLNR164DKC3 DCLNR164DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP
                    List price:
                    $107.19 /each.
                    Your price::
                    Qty
                    1875141 DCLNR204DKC3 DCLNR204DKC3 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP  
                      List price:
                      $121.66 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      Kenclamp™ Toolholders

                      Kenloc™ Inserts
                      (14 Products)
                      • TurningTurning
                      • ProfilingProfiling
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
                      1875149 DDJNL164CKC3 DDJNL164CKC3 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250 DN..432 15 IP 15 IP 15 IP  
                        List price:
                        $156.71 /each.
                        Your price::
                        Qty