For US and Canadian customers, a tariff surcharge will be added to your order for metal cutting products.
Top Notch™ Profiling
Top Notch™ profiling inserts and toolholders stand out as the top choice for high-production profiling applications, catering to the demands of precision machining. Kennametal’s Top Notch system provides consistent tool performance, accurate indexing, and superior clamping to provide excellent surface finishing and superior tool life. The precision-ground inserts guarantee high precision indexing and lower cutting forces. The inserts are stable against alternating cutting force directions, compared with customary clamping methods and the second cutting edge is well protected against chip hammering. Whether you're working with metals, plastics, or composites, these inserts and holders prove to be a versatile solution.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (386)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(386)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(386)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(386)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(386)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(386)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(386)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(386)
- M Stainless Steel (343)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(343)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(343)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(343)
- K Cast Iron (161)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(161)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(161)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(161)
- N Non-Ferrous Materials (164)
- N1Wrought Aluminum (133)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(133)
- N3High-Silicon Aluminum Alloys Si >12.2%(101)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (164)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (147)
- N6Carbon, Graphite Composites, CFRP (122)
- N7MMC's (93)
- S High-Temp Alloys (347)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(347)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(347)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(347)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(330)
Applications
Applications
Face Grooving (63)
Facing (6)
ID Facing (6)
Multiple Direction Cutting (100)
Profiling (6)
TRN Boring (6)
Turning (6)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (87)
- Lightly Interrupted Cut (146)
- Smooth Cut (239)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 62.5 (2)
- 72.5 (2)
- 93.0 (1)
- 95.0 (77)
- 100.0 (1)
- 107.5 (9)
- 117.5 (8)
to
Connection Style
Connection Style
- Bolt-On Head (2)
- Boring Bar Shank (42)
- Toolholder (56)
Over All Length [L]
Over All Length [L]
- 19.05 mm(2)
- 80.0 mm(1)
- 88.9 mm(2)
- 100.0 mm(2)
- 101.6 mm(2)
- 114.3 mm(10)
- 125.0 mm(10)
- 127.0 mm(4)
- 150.0 mm(15)
- 152.4 mm(12)
- 170.0 mm(2)
- 180.0 mm(2)
- 184.45 mm(2)
- 200.0 mm(2)
- 203.2 mm(2)
- 204.591 mm(1)
- 206.553 mm(2)
- 207.01 mm(1)
- 250.0 mm(4)
- 254.0 mm(7)
- 255.588 mm(1)
- 255.59 mm(1)
- 256.389 mm(2)
- 300.0 mm(2)
- 304.8 mm(5)
- 350.0 mm(1)
- 355.6 mm(2)
- 357.38 mm(1)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.125 mm(80)
- 0.2 mm(131)
- 0.4 mm(232)
- 0.5 mm(89)
- 0.8 mm(213)
- 1.0 mm(15)
- 1.2 mm(48)
- 1.6 mm(34)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(365)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K00326 (29)
- K313 (93)
- K68 (116)
- K8735 (29)
- KC5010 (129)
- KC5025 (101)
- KC5410 (61)
- KC730 (113)
- KC850 (113)
- KCK05 (32)
- KCK15B (31)
- KCM15B (59)
- KCM25 (94)
- KCM25B (5)
- KCP10 (106)
- KCP25 (106)
- KCP25B (95)
- KCP25C (132)
- KCS10B (33)
- KCU10 (134)
- KCU10B (144)
- KCU25 (127)
- KCU25B (128)
- KD1425 (101)
- KS15 (29)
- KT315 (99)
Hand Of Tool
Hand Of Tool
- L (41)
- N (4)
- R (55)
F Dimension
F Dimension
- 8.875 mm(2)
- 9.0 mm(2)
- 9.398 mm(2)
- 9.525 mm(4)
- 10.875 mm(1)
- 11.0 mm(2)
- 12.5 mm(1)
- 12.57 mm(1)
- 12.573 mm(3)
- 12.624 mm(1)
- 12.7 mm(3)
- 13.0 mm(2)
- 14.27 mm(4)
- 14.275 mm(2)
- 15.88 mm(2)
- 16.0 mm(3)
- 17.0 mm(1)
- 18.923 mm(2)
- 19.05 mm(7)
- 19.43 mm(1)
- 20.0 mm(2)
- 22.0 mm(4)
- 25.0 mm(8)
- 25.4 mm(8)
- 27.0 mm(1)
- 28.45 mm(1)
- 28.575 mm(2)
- 31.75 mm(9)
- 32.0 mm(14)
- 35.0 mm(1)
- 38.1 mm(2)
- 50.8 mm(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 16.0 mm(4)
- 16.764 mm(2)
- 17.018 mm(2)
- 19.05 mm(1)
- 20.0 mm(3)
- 22.86 mm(4)
- 24.89 mm(4)
- 24.892 mm(2)
- 25.0 mm(2)
- 26.92 mm(1)
- 32.0 mm(3)
- 33.02 mm(5)
- 40.0 mm(4)
- 45.06 mm(1)
- 46.48 mm(1)
- 50.0 mm(1)
- 50.8 mm(2)
- 53.848 mm(1)
- 63.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(4)
- 16.764 mm(2)
- 17.018 mm(2)
- 19.05 mm(1)
- 20.0 mm(3)
- 22.86 mm(4)
- 24.89 mm(4)
- 24.892 mm(2)
- 25.0 mm(2)
- 26.92 mm(1)
- 32.0 mm(3)
- 33.02 mm(5)
- 40.0 mm(4)
- 45.06 mm(1)
- 46.48 mm(1)
- 50.0 mm(1)
- 50.8 mm(2)
- 53.848 mm(1)
- 63.0 mm(1)
to
Cutting Direction
Cutting Direction
- B (73)
- E (17)
- P (4)
- S (6)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (7)
- DOUBLE POSITIVE (5)
- NEGATIVE-ZERO (42)
- NEUTRAL (ZERO) (46)
Maximum Bore Depth
Maximum Bore Depth
- 48.0 mm(2)
- 50.8 mm(2)
- 63.5 mm(2)
- 64.0 mm(2)
- 72.0 mm(2)
- 76.2 mm(8)
- 80.0 mm(2)
- 95.25 mm(2)
- 96.0 mm(1)
- 100.0 mm(3)
- 101.6 mm(5)
- 114.3 mm(2)
- 126.8 mm(1)
- 127.0 mm(1)
- 128.0 mm(4)
- 152.4 mm(3)
- 160.0 mm(1)
- 200.0 mm(1)
to
Boring Bar Material
Boring Bar Material
- C (10)
- S (34)
Front-End
Clamp Style
Clamp Style
- N (100)
Insert Shape
Insert Shape
- D-DIAMOND/RHOMBIC 55 (30)
- K-PARALLELOGRAM 55 (5)
- N/K-PARALLELOGRAM 55 (273)
- V-DIAMOND/RHOMBIC 35 (157)
Maximum Cutting Depth
Maximum Cutting Depth
- 2.953 mm(2)
- 3.08 mm(1)
- 4.7 mm(1)
- 6.2 mm(1)
to
Insert Geometry
Shape
Shape
- D-DIAMOND/RHOMBIC 55 (25)
- K-PARALLELOGRAM 55 (1)
- N/K-PARALLELOGRAM 55 (217)
- V-DIAMOND/RHOMBIC 35 (122)
Insert IC Size
Insert IC Size
- 4.775 mm(2)
- 6.35 mm(12)
- 9.525 mm(110)
- 12.7 mm(25)
to
Cutting Edge Length
Cutting Edge Length
- 11.07 mm(1)
- 11.071 mm(11)
- 11.597 mm(126)
- 11.6 mm(4)
- 11.63 mm(6)
- 15.442 mm(48)
- 15.5 mm(1)
- 15.504 mm(24)
- 16.606 mm(105)
- 16.61 mm(5)
- 17.51 mm(9)
- 22.731 mm(6)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 08 (39)
- 1 (7)
- 15 (104)
- 2 (2)
- 20 (35)
- 25 (13)
- 32 (2)
- FP (73)
- HP (2)
Cutting Tool Material
Cutting Tool Material
- D P (101)
- H T (99)
- H W (440)
Tolerance Class
Tolerance Class
- G (278)
- M (43)
- U (44)
Back-End
Connection Type
Connection Type
- BORING BAR (42)
- BORING BAR HEAD (2)
- SQUARE SHANK (56)
Back-End Diameter
Back-End Diameter
- 12.0 mm(4)
- 12.7 mm(5)
- 15.875 mm(4)
- 16.0 mm(3)
- 19.05 mm(7)
- 20.0 mm(2)
- 25.0 mm(3)
- 25.4 mm(5)
- 31.7 mm(1)
- 31.75 mm(1)
- 32.0 mm(4)
- 38.1 mm(3)
- 40.0 mm(1)
- 50.0 mm(1)
to
Shank Height
Shank Height
- 11.41 mm(2)
- 12.0 mm(1)
- 12.7 mm(4)
- 15.41 mm(1)
- 15.875 mm(3)
- 16.0 mm(2)
- 19.05 mm(9)
- 20.0 mm(10)
- 23.82 mm(3)
- 25.0 mm(11)
- 25.4 mm(10)
- 30.82 mm(4)
- 31.75 mm(2)
- 32.0 mm(2)
- 38.1 mm(2)
- 38.82 mm(1)
- 46.96 mm(1)
to
Shank Width
Shank Width
- 12.0 mm(1)
- 12.7 mm(4)
- 15.875 mm(3)
- 16.0 mm(2)
- 19.05 mm(9)
- 20.0 mm(10)
- 21.96 mm(3)
- 25.0 mm(13)
- 25.4 mm(10)
- 28.96 mm(4)
- 31.75 mm(2)
- 36.96 mm(1)
- 38.1 mm(2)
- 46.96 mm(1)
to
No filters matching ""
