successfully added to cart
View Cart

Notifications

Mark all as read
Read More
HPR Drill - new

Perçage à vitesse et avance élevées jusqu'à 8xD, avec arrosage direct standard,

Rayon de pointe breveté assurant une longue tenue de coupe, une excellente qualité de perçage, tout en évitant l'écaillage de la pièce en sortie de trou.

La pointe brevetée amincie du HPR offre d’excellentes propriétés d'auto centrage ainsi qu’une faible poussée pour une rectitude maximale du trou.

4 chanfreins, l’idéal pour les trous sécants et les sorties inclinées, assurant une stabilité maximale.

Les goujures ultrapolies provoquent le minimum de friction améliorant l'évacuation des copeaux et la tenue de coupe.

Paré pour le MQL ! Toutes les queues sont conformes aux spécifications des normes DIN 6535 et 69090-03 en matière de quantité minimum de lubrifiant.

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (460)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (460)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (460)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (460)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (460)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (460)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (460)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (460)
  • K Cast Iron (460)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (460)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (460)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (460)
Applications
Applications
  • Cross Hole Drilling Cross Hole Drilling (460)
  • Drilling Drilling (460)
  • Inclined Exit Drilling Inclined Exit Drilling (460)
  • Stacked Plates Drilling Stacked Plates Drilling (460)
Cutting Diameter
Cutting Diameter
  • 0.1181 in (3)
  • 0.122 in (3)
  • 0.125 in (5)
  • 0.126 in (4)
  • 0.1285 in (4)
  • 0.1299 in (3)
  • 0.1339 in (3)
  • 0.136 in (5)
  • 0.1378 in (4)
  • 0.1417 in (3)
  • 0.144 in (2)
  • 0.1457 in (3)
  • 0.1496 in (4)
  • 0.1535 in (3)
  • 0.1563 in (4)
  • 0.1575 in (4)
  • 0.159 in (2)
  • 0.1614 in (4)
  • 0.1654 in (4)
  • 0.1693 in (3)
  • 0.1772 in (4)
  • 0.1811 in (4)
  • 0.185 in (3)
  • 0.1875 in (6)
  • 0.189 in (4)
  • 0.1929 in (3)
  • 0.1969 in (4)
  • 0.2008 in (4)
  • 0.201 in (3)
  • 0.2047 in (4)
  • 0.2087 in (3)
  • 0.2126 in (3)
  • 0.2165 in (4)
  • 0.2188 in (6)
  • 0.2205 in (3)
  • 0.2244 in (3)
  • 0.2283 in (4)
  • 0.2362 in (4)
  • 0.2402 in (4)
  • 0.2441 in (4)
  • 0.248 in (3)
  • 0.25 in (6)
  • 0.252 in (3)
  • 0.2559 in (4)
  • 0.257 in (3)
  • 0.2598 in (3)
  • 0.2638 in (3)
  • 0.2656 in (4)
  • 0.2677 in (4)
  • 0.2756 in (5)
  • 0.2813 in (5)
  • 0.2913 in (3)
  • 0.2953 in (3)
  • 0.2969 in (3)
  • 0.3071 in (3)
  • 0.3125 in (5)
  • 0.315 in (4)
  • 0.3189 in (3)
  • 0.3228 in (3)
  • 0.3281 in (4)
  • 0.3346 in (3)
  • 0.3438 in (5)
  • 0.3465 in (3)
  • 0.3543 in (4)
  • 0.3583 in (3)
  • 0.3594 in (4)
  • 0.374 in (3)
  • 0.375 in (5)
  • 0.3858 in (3)
  • 0.3906 in (4)
  • 0.3937 in (4)
  • 0.4016 in (3)
  • 0.4055 in (3)
  • 0.4063 in (5)
  • 0.4134 in (4)
  • 0.4219 in (4)
  • 0.4252 in (3)
  • 0.4331 in (3)
  • 0.4375 in (5)
  • 0.4528 in (3)
  • 0.4531 in (4)
  • 0.4646 in (3)
  • 0.4688 in (3)
  • 0.4724 in (4)
  • 0.4844 in (3)
  • 0.4921 in (3)
  • 0.5 in (6)
  • 0.5118 in (3)
  • 0.5315 in (5)
  • 0.5512 in (4)
  • 0.5625 in (5)
  • 0.5709 in (3)
  • 0.5906 in (3)
  • 0.6102 in (3)
  • 0.625 in (3)
  • 0.6299 in (3)
  • 0.6496 in (3)
  • 0.6693 in (3)
  • 0.689 in (3)
  • 0.7087 in (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.0 mm (3)
  • 3.1 mm (3)
  • 3.175 mm (5)
  • 3.2 mm (3)
  • 3.264 mm (3)
  • 3.3 mm (3)
  • 3.4 mm (3)
  • 3.4544 mm (2)
  • 3.455 mm (3)
  • 3.5 mm (3)
  • 3.6 mm (3)
  • 3.7 mm (3)
  • 3.8 mm (3)
  • 3.9 mm (3)
  • 3.97 mm (4)
  • 4.0 mm (4)
  • 4.1 mm (3)
  • 4.2 mm (3)
  • 4.3 mm (3)
  • 4.4 mm (2)
  • 4.5 mm (3)
  • 4.6 mm (3)
  • 4.7 mm (3)
  • 4.7625 mm (3)
  • 4.763 mm (3)
  • 4.8 mm (3)
  • 4.9 mm (3)
  • 5.0 mm (4)
  • 5.055 mm (2)
  • 5.1 mm (3)
  • 5.106 mm (2)
  • 5.2 mm (3)
  • 5.3 mm (3)
  • 5.4 mm (3)
  • 5.5 mm (3)
  • 5.5575 mm (3)
  • 5.558 mm (3)
  • 5.6 mm (3)
  • 5.7 mm (3)
  • 5.8 mm (3)
  • 6.0 mm (4)
  • 6.1 mm (3)
  • 6.2 mm (3)
  • 6.3 mm (3)
  • 6.35 mm (6)
  • 6.4 mm (3)
  • 6.5 mm (3)
  • 6.5278 mm (2)
  • 6.6 mm (3)
  • 6.7 mm (3)
  • 6.746 mm (2)
  • 6.8 mm (3)
  • 7.0 mm (5)
  • 7.145 mm (5)
  • 7.4 mm (3)
  • 7.5 mm (3)
  • 7.8 mm (3)
  • 7.9375 mm (5)
  • 8.0 mm (4)
  • 8.1 mm (3)
  • 8.2 mm (3)
  • 8.3337 mm (3)
  • 8.5 mm (3)
  • 8.7325 mm (3)
  • 8.8 mm (3)
  • 9.0 mm (4)
  • 9.1 mm (3)
  • 9.1288 mm (3)
  • 9.5 mm (3)
  • 9.525 mm (5)
  • 9.8 mm (3)
  • 9.9212 mm (3)
  • 10.0 mm (4)
  • 10.2 mm (3)
  • 10.3 mm (3)
  • 10.32 mm (5)
  • 10.5 mm (3)
  • 10.7163 mm (3)
  • 10.8 mm (3)
  • 11.0 mm (3)
  • 11.1125 mm (3)
  • 11.5 mm (3)
  • 11.5087 mm (3)
  • 11.8 mm (3)
  • 12.0 mm (4)
  • 12.5 mm (3)
  • 12.7 mm (6)
  • 13.0 mm (3)
  • 13.5 mm (3)
  • 14.0 mm (4)
  • 14.2875 mm (3)
  • 14.5 mm (3)
  • 15.0 mm (3)
  • 15.5 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (3)
  • 16.5 mm (3)
  • 17.0 mm (3)
  • 17.5 mm (3)
  • 18.0 mm (3)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 14.0 mm (12)
  • 17.0 mm (11)
  • 17.4 mm (3)
  • 20.0 mm (17)
  • 21.4 mm (8)
  • 22.6 mm (1)
  • 23.0 mm (13)
  • 24.0 mm (11)
  • 25.9 mm (2)
  • 28.3 mm (5)
  • 28.6 mm (9)
  • 29.0 mm (20)
  • 31.75 mm (1)
  • 33.0 mm (10)
  • 34.7 mm (4)
  • 34.9 mm (15)
  • 35.0 mm (33)
  • 38.1 mm (5)
  • 39.6 mm (4)
  • 40.0 mm (10)
  • 40.3 mm (10)
  • 41.0 mm (9)
  • 43.0 mm (34)
  • 45.0 mm (6)
  • 46.5 mm (1)
  • 48.0 mm (14)
  • 48.7 mm (9)
  • 49.0 mm (25)
  • 50.8 mm (2)
  • 51.0 mm (4)
  • 53.1 mm (6)
  • 55.0 mm (3)
  • 55.6 mm (5)
  • 56.0 mm (23)
  • 57.0 mm (10)
  • 60.0 mm (21)
  • 63.0 mm (12)
  • 63.5 mm (3)
  • 64.0 mm (4)
  • 64.5 mm (1)
  • 71.0 mm (8)
  • 73.0 mm (2)
  • 74.5 mm (1)
  • 76.2 mm (4)
  • 77.0 mm (5)
  • 80.0 mm (11)
  • 88.9 mm (4)
  • 96.0 mm (10)
  • 101.6 mm (2)
  • 112.0 mm (7)
  • 114.3 mm (1)
  • 128.0 mm (5)
  • 144.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.5512 in (12)
  • 0.6693 in (11)
  • 0.685 in (3)
  • 0.7874 in (17)
  • 0.8425 in (8)
  • 0.8898 in (1)
  • 0.9055 in (13)
  • 0.9449 in (11)
  • 1.0197 in (2)
  • 1.1142 in (5)
  • 1.126 in (9)
  • 1.1417 in (20)
  • 1.25 in (1)
  • 1.2992 in (10)
  • 1.3661 in (4)
  • 1.374 in (15)
  • 1.378 in (33)
  • 1.5 in (5)
  • 1.5591 in (4)
  • 1.5748 in (10)
  • 1.5866 in (10)
  • 1.6142 in (9)
  • 1.6929 in (34)
  • 1.7717 in (6)
  • 1.8307 in (1)
  • 1.8898 in (14)
  • 1.9173 in (9)
  • 1.9291 in (25)
  • 2.0 in (2)
  • 2.0079 in (4)
  • 2.0906 in (6)
  • 2.1654 in (3)
  • 2.189 in (5)
  • 2.2047 in (23)
  • 2.2441 in (10)
  • 2.3622 in (21)
  • 2.4803 in (12)
  • 2.5 in (3)
  • 2.5197 in (4)
  • 2.5394 in (1)
  • 2.7953 in (8)
  • 2.874 in (2)
  • 2.9331 in (1)
  • 3.0 in (4)
  • 3.0315 in (5)
  • 3.1496 in (11)
  • 3.5 in (4)
  • 3.7795 in (10)
  • 4.0 in (2)
  • 4.4094 in (7)
  • 4.5 in (1)
  • 5.0394 in (5)
  • 5.6693 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.7874 in (12)
  • 0.9055 in (3)
  • 0.9449 in (11)
  • 1.063 in (8)
  • 1.1024 in (30)
  • 1.1417 in (1)
  • 1.3386 in (13)
  • 1.378 in (9)
  • 1.4173 in (12)
  • 1.46 in (1)
  • 1.4961 in (5)
  • 1.5748 in (10)
  • 1.6142 in (8)
  • 1.6929 in (15)
  • 1.7323 in (20)
  • 1.77 in (1)
  • 1.811 in (4)
  • 1.8504 in (13)
  • 1.9291 in (9)
  • 1.9685 in (10)
  • 2.0079 in (4)
  • 2.0866 in (26)
  • 2.126 in (4)
  • 2.1654 in (10)
  • 2.2047 in (14)
  • 2.32 in (2)
  • 2.3228 in (2)
  • 2.3622 in (15)
  • 2.4016 in (25)
  • 2.5197 in (1)
  • 2.5591 in (6)
  • 2.5984 in (6)
  • 2.6378 in (10)
  • 2.7559 in (5)
  • 2.7953 in (23)
  • 2.87 in (3)
  • 2.874 in (4)
  • 2.9134 in (4)
  • 2.9921 in (5)
  • 3.0315 in (16)
  • 3.1102 in (3)
  • 3.2283 in (1)
  • 3.2677 in (12)
  • 3.46 in (4)
  • 3.622 in (13)
  • 3.6614 in (8)
  • 3.7402 in (1)
  • 3.9764 in (5)
  • 4.02 in (4)
  • 4.3307 in (10)
  • 4.57 in (2)
  • 5.0394 in (7)
  • 5.12 in (1)
  • 5.748 in (5)
  • 6.4173 in (4)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (12)
  • 23.0 mm (3)
  • 24.0 mm (11)
  • 27.0 mm (8)
  • 28.0 mm (30)
  • 29.0 mm (1)
  • 34.0 mm (13)
  • 35.0 mm (9)
  • 36.0 mm (12)
  • 37.084 mm (1)
  • 38.0 mm (5)
  • 40.0 mm (10)
  • 41.0 mm (8)
  • 43.0 mm (15)
  • 44.0 mm (20)
  • 44.958 mm (1)
  • 46.0 mm (4)
  • 47.0 mm (13)
  • 49.0 mm (9)
  • 50.0 mm (10)
  • 51.0 mm (4)
  • 53.0 mm (26)
  • 54.0 mm (4)
  • 55.0 mm (10)
  • 56.0 mm (14)
  • 58.928 mm (2)
  • 59.0 mm (2)
  • 60.0 mm (15)
  • 61.0 mm (25)
  • 64.0 mm (1)
  • 65.0 mm (6)
  • 66.0 mm (6)
  • 67.0 mm (10)
  • 70.0 mm (5)
  • 71.0 mm (23)
  • 72.898 mm (3)
  • 73.0 mm (4)
  • 74.0 mm (4)
  • 76.0 mm (5)
  • 77.0 mm (16)
  • 79.0 mm (3)
  • 82.0 mm (1)
  • 83.0 mm (12)
  • 87.884 mm (4)
  • 92.0 mm (13)
  • 93.0 mm (8)
  • 95.0 mm (1)
  • 101.0 mm (5)
  • 102.108 mm (4)
  • 110.0 mm (10)
  • 116.078 mm (2)
  • 128.0 mm (7)
  • 130.048 mm (1)
  • 146.0 mm (5)
  • 163.0 mm (4)
Reach Min to Reach Max
application
Coating
Coating
  • AlTiN (452)
backEnd
Back-End Diameter
Back-End Diameter
  • 4.7625 mm (23)
  • 6.0 mm (118)
  • 6.35 mm (19)
  • 7.9375 mm (18)
  • 8.0 mm (59)
  • 9.525 mm (17)
  • 10.0 mm (49)
  • 11.1125 mm (14)
  • 12.0 mm (43)
  • 12.7 mm (11)
  • 14.0 mm (29)
  • 14.2875 mm (8)
  • 15.875 mm (2)
  • 16.0 mm (23)
  • 17.4625 mm (2)
  • 18.0 mm (16)
  • 19.05 mm (1)
  • 20.0 mm (8)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.1875 in (23)
  • 0.2362 in (118)
  • 0.25 in (19)
  • 0.3125 in (18)
  • 0.315 in (59)
  • 0.375 in (17)
  • 0.3937 in (49)
  • 0.4375 in (14)
  • 0.4724 in (43)
  • 0.5 in (11)
  • 0.5512 in (29)
  • 0.5625 in (8)
  • 0.625 in (2)
  • 0.6299 in (23)
  • 0.6875 in (2)
  • 0.7087 in (16)
  • 0.75 in (1)
  • 0.7874 in (8)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Forets en carbure monobloc

HPR • B256 • 8 x D • Arrosage interne
(84 Products)
  • PerçagePerçage
  • Perçage : Sortie inclinéePerçage : Sortie inclinée
  • Perçage : Tôles empiléesPerçage : Tôles empilées
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Drill Diameter M [D1] Drill Diameter M [D1] Wire Size [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
6783346 B256A03264HPR B256A03264HPR KCK10A 3.2640 .1285 30 78.0000 3.070 40.0000 1.574 33.0000 1.299 0.9600 .0378 36.0 1.417 6.0 .2362
    List price:
    $215.27 /each.
    Your price::
    Qty
    6783348 B256A03400HPR B256A03400HPR KCK10A 3.4000 .1339   78.0000 3.070 40.0000 1.574 33.0000 1.299 1.0000 .0394 36.0 1.417 6.0 .2362
      List price:
      $215.27 /each.
      Your price::
      Qty
      6783369 B256A04300HPR B256A04300HPR KCK10A 4.3000 .1693   87.0000 3.425 49.0000 1.929 41.0000 1.614 1.2600 .0496 36.0 1.417 6.0 .2362
        List price:
        $215.27 /each.
        Your price::
        Qty
        6783372 B256A04700HPR B256A04700HPR KCK10A 4.7000 .1850   87.0000 3.425 49.0000 1.929 41.0000 1.614 1.3800 .0543 36.0 1.417 6.0 .2362
          List price:
          $215.27 /each.
          Your price::
          Qty
          6783373 B256A04763HPR B256A04763HPR KCK10A 4.7630 .1875   94.0000 3.700 56.0000 2.204 48.0000 1.889 1.4000 .0551 36.0 1.417 6.0 .2362
            List price:
            $215.27 /each.
            Your price::
            Qty
            6783387 B256A06000HPR B256A06000HPR KCK10A 6.0000 .2362   94.0000 3.700 56.0000 2.204 48.0000 1.889 1.7600 .0693 36.0 1.417 6.0 .2362
              List price:
              $215.27 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Forets en carbure monobloc

              HPR • B254 • 3 x D • Arrosage interne
              (101 Products)
              • PerçagePerçage
              • Perçage : Sortie inclinéePerçage : Sortie inclinée
              • Perçage : Tôles empiléesPerçage : Tôles empilées
              • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              6783025 B254A07400HPR B254A07400HPR KCK10A 7.4000 .2913 79.0000 3.110 41.0000 1.614 29.0000 1.141 2.1700 .0854 36.0 1.417 8.0 .315
                List price:
                $141.63 /each.
                Your price::
                Qty
                6783053 B254A10000HPR B254A10000HPR KCK10A 10.0000 .3937 89.0000 3.503 47.0000 1.850 35.0000 1.378 2.9300 .1154 40.0 1.574 10.0 .3937
                  List price: