Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

Fraisage

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (7468)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6186)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6295)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6332)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6542)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7042)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6535)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (5978)
  • M Stainless Steel (6960)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6960)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6958)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6241)
  • K Cast Iron (6283)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6282)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6277)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5574)
  • N Non-Ferrous Materials (2823)
    • N1
      Wrought Aluminum
      (2792)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2761)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2529)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (716)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (292)
    • N6
      Carbon, Graphite Composites, CFRP
      (96)
    • N7
      MMC's
      (78)
  • S High-Temp Alloys (5815)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5373)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5328)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5426)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5599)
  • H Hardened Materials (5041)
    • H1
      Hardened Materials 44-48 HRC
      (5010)
    • H2
      Hardened Materials 48-55 HRC
      (1675)
    • H3
      Hardened Materials 56-60 HRC
      (449)
    • H4
      Hardened Materials >60 HRC
      (191)
  • C CFRP Materials (31)
    • C1
      CFRP, CFRP / CFRP
      (31)
Select First Choice
  • BR (194)
  • CN (898)
  • DE (1272)
  • GB (686)
  • IN (212)
  • SG (405)
  • US (1557)
Applications
Applications
  • Chamfer Milling Chamfer Milling (447)
  • Concave Radius Milling Concave Radius Milling (14)
  • Countersinking Countersinking (14)
  • Drilling Drilling (297)
  • Face Milling Face Milling (3592)
  • Flat Bottom Drilling Flat Bottom Drilling (14)
  • ID Thread Turning ID Thread Turning (104)
  • Pocket Pocket (4653)
  • Pocket Helical Pocket Helical (4645)
  • Pocket Milling Pocket Milling (4897)
  • Pocket Plunge Milling Pocket Plunge Milling (1601)
  • Profile Milling Profile Milling (1299)
  • Ramping Ramping (4639)
  • Shoulder Ball Nose Shoulder Ball Nose (1159)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (263)
  • Shoulder Milling Shoulder Milling (5378)
  • Shoulder Roughing Shoulder Roughing (2513)
  • Shoulder Square End Shoulder Square End (4285)
  • Slot Ball Nose Slot Ball Nose (503)
  • Slot Milling Slot Milling (4069)
  • Slot Side Slot Side (444)
  • Slot Square End Slot Square End (3195)
  • Slot T Slot T (30)
  • Trochoidal Milling Trochoidal Milling (897)
Cutting Diameter
Cutting Diameter
  • 0.016 in (4)
  • 0.02 in (5)
  • 0.024 in (5)
  • 0.031 in (10)
  • 0.039 in (11)
  • 0.047 in (7)
  • 0.06 in (9)
  • 0.063 in (12)
  • 0.072 in (4)
  • 0.078 in (8)
  • 0.079 in (41)
  • 0.094 in (14)
  • 0.098 in (23)
  • 0.109 in (6)
  • 0.119 in (53)
  • 0.125 in (53)
  • 0.138 in (18)
  • 0.142 in (4)
  • 0.156 in (15)
  • 0.157 in (88)
  • 0.177 in (8)
  • 0.188 in (69)
  • 0.197 in (71)
  • 0.217 in (6)
  • 0.219 in (14)
  • 0.237 in (144)
  • 0.25 in (170)
  • 0.276 in (18)
  • 0.281 in (12)
  • 0.313 in (84)
  • 0.315 in (162)
  • 0.345 in (5)
  • 0.347 in (4)
  • 0.351 in (4)
  • 0.354 in (11)
  • 0.375 in (266)
  • 0.382 in (6)
  • 0.394 in (259)
  • 0.408 in (4)
  • 0.437 in (4)
  • 0.438 in (34)
  • 0.461 in (5)
  • 0.473 in (283)
  • 0.5 in (427)
  • 0.512 in (4)
  • 0.528 in (4)
  • 0.539 in (4)
  • 0.551 in (67)
  • 0.564 in (17)
  • 0.591 in (13)
  • 0.606 in (7)
  • 0.618 in (4)
  • 0.625 in (261)
  • 0.629 in (4)
  • 0.63 in (298)
  • 0.709 in (44)
  • 0.75 in (412)
  • 0.778 in (9)
  • 0.787 in (300)
  • 0.866 in (10)
  • 0.875 in (15)
  • 0.984 in (228)
  • 1.0 in (408)
  • 1.028 in (11)
  • 1.102 in (11)
  • 1.181 in (9)
  • 1.25 in (151)
  • 1.252 in (9)
  • 1.26 in (110)
  • 1.379 in (5)
  • 1.496 in (9)
  • 1.5 in (69)
  • 1.528 in (8)
  • 1.575 in (86)
  • 1.655 in (7)
  • 1.85 in (5)
  • 1.969 in (76)
  • 2.0 in (92)
  • 2.008 in (8)
  • 2.126 in (5)
  • 2.48 in (86)
  • 2.5 in (65)
  • 2.52 in (5)
  • 2.528 in (5)
  • 2.677 in (7)
  • 3.0 in (104)
  • 3.15 in (99)
  • 3.307 in (5)
  • 3.938 in (92)
  • 4.0 in (92)
  • 4.921 in (100)
  • 5.0 in (74)
  • 6.0 in (63)
  • 6.299 in (86)
  • 7.875 in (52)
  • 8.0 in (38)
  • 9.843 in (36)
  • 10.0 in (28)
  • 12.0 in (18)
  • 12.403 in (19)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.4 mm (4)
  • 0.5 mm (5)
  • 0.601 mm (5)
  • 0.8 mm (10)
  • 1.0 mm (11)
  • 1.201 mm (7)
  • 1.5 mm (9)
  • 1.6 mm (12)
  • 1.8 mm (4)
  • 1.975 mm (8)
  • 2.0 mm (41)
  • 2.375 mm (14)
  • 2.5 mm (23)
  • 2.776 mm (6)
  • 3.0 mm (53)
  • 3.176 mm (53)
  • 3.5 mm (18)
  • 3.575 mm (4)
  • 3.975 mm (13)
  • 4.0 mm (88)
  • 4.5 mm (8)
  • 4.775 mm (69)
  • 5.0 mm (71)
  • 5.5 mm (6)
  • 5.551 mm (14)
  • 6.0 mm (144)
  • 6.351 mm (170)
  • 7.0 mm (18)
  • 7.15 mm (12)
  • 7.95 mm (84)
  • 8.0 mm (162)
  • 8.725 mm (5)
  • 8.8 mm (4)
  • 8.9 mm (4)
  • 9.0 mm (11)
  • 9.525 mm (266)
  • 9.701 mm (6)
  • 10.0 mm (259)
  • 10.326 mm (4)
  • 11.101 mm (4)
  • 11.125 mm (34)
  • 11.701 mm (5)
  • 12.0 mm (283)
  • 12.701 mm (427)
  • 13.0 mm (4)
  • 13.4 mm (4)
  • 13.701 mm (4)
  • 14.0 mm (67)
  • 14.3 mm (17)
  • 15.0 mm (13)
  • 15.4 mm (7)
  • 15.701 mm (4)
  • 15.875 mm (261)
  • 15.976 mm (4)
  • 16.0 mm (298)
  • 18.0 mm (44)
  • 19.05 mm (412)
  • 19.75 mm (9)
  • 20.0 mm (300)
  • 22.0 mm (10)
  • 22.225 mm (15)
  • 25.0 mm (228)
  • 25.401 mm (408)
  • 26.1 mm (11)
  • 28.0 mm (11)
  • 30.0 mm (9)
  • 31.75 mm (151)
  • 31.8 mm (9)
  • 32.0 mm (110)
  • 35.0 mm (5)
  • 38.0 mm (9)
  • 38.1 mm (69)
  • 38.801 mm (8)
  • 40.0 mm (86)
  • 42.0 mm (7)
  • 47.0 mm (5)
  • 50.0 mm (76)
  • 50.801 mm (92)
  • 51.0 mm (8)
  • 54.0 mm (5)
  • 63.0 mm (86)
  • 63.5 mm (65)
  • 64.0 mm (5)
  • 64.2 mm (5)
  • 68.0 mm (7)
  • 76.2 mm (104)
  • 80.0 mm (99)
  • 84.0 mm (5)
  • 100.0 mm (92)
  • 101.601 mm (92)
  • 125.0 mm (100)
  • 127.0 mm (74)
  • 152.4 mm (63)
  • 160.0 mm (86)
  • 200.0 mm (52)
  • 203.201 mm (38)
  • 250.0 mm (36)
  • 254.0 mm (28)
  • 304.8 mm (18)
  • 315.0 mm (19)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 12.0 mm (3)
  • 12.701 mm (2)
  • 15.0 mm (6)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 19.05 mm (12)
  • 20.0 mm (20)
  • 24.0 mm (2)
  • 25.0 mm (30)
  • 25.201 mm (2)
  • 25.401 mm (25)
  • 28.0 mm (2)
  • 30.0 mm (2)
  • 31.55 mm (3)
  • 31.75 mm (25)
  • 31.8 mm (3)
  • 32.0 mm (37)
  • 33.176 mm (5)
  • 33.575 mm (5)
  • 35.0 mm (13)
  • 37.9 mm (2)
  • 38.1 mm (34)
  • 38.15 mm (2)
  • 38.551 mm (2)
  • 39.926 mm (6)
  • 40.0 mm (26)
  • 40.176 mm (7)
  • 40.901 mm (2)
  • 41.1 mm (7)
  • 42.0 mm (8)
  • 44.45 mm (2)
  • 45.151 mm (2)
  • 45.975 mm (2)
  • 46.276 mm (2)
  • 46.35 mm (2)
  • 47.1 mm (2)
  • 48.0 mm (2)
  • 48.176 mm (2)
  • 48.95 mm (2)
  • 49.0 mm (6)
  • 50.0 mm (33)
  • 50.6 mm (2)
  • 50.651 mm (2)
  • 50.801 mm (32)
  • 51.0 mm (5)
  • 51.45 mm (2)
  • 51.801 mm (4)
  • 52.0 mm (17)
  • 53.95 mm (3)
  • 56.35 mm (2)
  • 58.151 mm (3)
  • 58.95 mm (3)
  • 63.0 mm (34)
  • 63.5 mm (20)
  • 63.875 mm (6)
  • 66.0 mm (19)
  • 71.15 mm (3)
  • 71.65 mm (3)
  • 74.0 mm (3)
  • 74.3 mm (3)
  • 74.5 mm (3)
  • 76.2 mm (26)
  • 76.801 mm (6)
  • 80.0 mm (26)
  • 84.351 mm (3)
  • 87.2 mm (3)
  • 88.15 mm (3)
  • 88.65 mm (5)
  • 88.7 mm (4)
  • 91.0 mm (3)
  • 91.2 mm (3)
  • 93.75 mm (6)
  • 100.0 mm (19)
  • 101.601 mm (19)
  • 108.15 mm (3)
  • 109.75 mm (3)
  • 110.226 mm (4)
  • 110.976 mm (3)
  • 112.7 mm (3)
  • 113.7 mm (4)
  • 125.0 mm (15)
  • 127.0 mm (11)
  • 133.15 mm (3)
  • 135.15 mm (3)
  • 135.625 mm (5)
  • 136.0 mm (3)
  • 137.951 mm (3)
  • 138.675 mm (4)
  • 152.4 mm (9)
  • 160.0 mm (11)
  • 161.025 mm (5)
  • 163.375 mm (3)
  • 170.976 mm (3)
  • 173.65 mm (4)
  • 200.0 mm (4)
  • 203.201 mm (3)
  • 211.826 mm (3)
  • 262.625 mm (4)
  • 289.35 mm (3)
  • 313.425 mm (5)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.473 in (3)
  • 0.5 in (2)
  • 0.591 in (6)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (12)
  • 0.787 in (20)
  • 0.946 in (2)
  • 0.984 in (30)
  • 0.992 in (2)
  • 1.0 in (25)
  • 1.102 in (2)
  • 1.181 in (2)
  • 1.242 in (3)
  • 1.25 in (25)
  • 1.252 in (4)
  • 1.26 in (37)
  • 1.306 in (5)
  • 1.322 in (5)
  • 1.379 in (13)
  • 1.492 in (2)
  • 1.5 in (34)
  • 1.502 in (2)
  • 1.518 in (2)
  • 1.572 in (6)
  • 1.575 in (26)
  • 1.582 in (7)
  • 1.61 in (2)
  • 1.618 in (7)
  • 1.655 in (8)
  • 1.75 in (2)
  • 1.778 in (2)
  • 1.81 in (2)
  • 1.822 in (2)
  • 1.825 in (2)
  • 1.854 in (2)
  • 1.891 in (2)
  • 1.897 in (2)
  • 1.927 in (2)
  • 1.929 in (6)
  • 1.969 in (33)
  • 1.992 in (2)
  • 1.994 in (2)
  • 2.0 in (32)
  • 2.008 in (5)
  • 2.027 in (2)
  • 2.039 in (4)
  • 2.047 in (17)
  • 2.124 in (3)
  • 2.219 in (2)
  • 2.289 in (3)
  • 2.321 in (3)
  • 2.48 in (34)
  • 2.5 in (20)
  • 2.515 in (6)
  • 2.598 in (19)
  • 2.801 in (3)
  • 2.821 in (3)
  • 2.914 in (3)
  • 2.926 in (3)
  • 2.934 in (3)
  • 3.0 in (26)
  • 3.024 in (6)
  • 3.15 in (26)
  • 3.321 in (3)
  • 3.434 in (3)
  • 3.47 in (3)
  • 3.49 in (5)
  • 3.492 in (4)
  • 3.583 in (3)
  • 3.591 in (3)
  • 3.692 in (6)
  • 3.938 in (19)
  • 4.0 in (19)
  • 4.258 in (3)
  • 4.321 in (3)
  • 4.34 in (4)
  • 4.369 in (3)
  • 4.437 in (3)
  • 4.476 in (4)
  • 4.921 in (15)
  • 5.0 in (11)
  • 5.242 in (3)
  • 5.321 in (3)
  • 5.34 in (5)
  • 5.354 in (3)
  • 5.431 in (3)
  • 5.46 in (4)
  • 6.0 in (9)
  • 6.299 in (11)
  • 6.34 in (5)
  • 6.432 in (3)
  • 6.731 in (3)
  • 6.837 in (4)
  • 7.875 in (4)
  • 8.0 in (3)
  • 8.34 in (3)
  • 10.34 in (4)
  • 11.392 in (3)
  • 12.34 in (5)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.851 mm (11)
  • 0.9 mm (23)
  • 1.0 mm (37)
  • 1.026 mm (17)
  • 1.1 mm (17)
  • 1.5 mm (104)
  • 1.6 mm (12)
  • 2.0 mm (16)
  • 2.2 mm (20)
  • 2.5 mm (78)
  • 3.0 mm (76)
  • 3.176 mm (15)
  • 3.2 mm (15)
  • 3.225 mm (44)
  • 3.5 mm (103)
  • 3.95 mm (20)
  • 4.0 mm (65)
  • 4.3 mm (22)
  • 4.5 mm (46)
  • 4.75 mm (21)
  • 5.0 mm (171)
  • 5.5 mm (61)
  • 5.9 mm (29)
  • 6.0 mm (208)
  • 6.325 mm (15)
  • 6.351 mm (64)
  • 6.5 mm (14)
  • 6.575 mm (13)
  • 6.601 mm (40)
  • 7.0 mm (31)
  • 7.95 mm (17)
  • 8.0 mm (165)
  • 9.0 mm (45)
  • 9.1 mm (12)
  • 9.125 mm (16)
  • 9.15 mm (41)
  • 9.175 mm (14)
  • 9.5 mm (40)
  • 9.525 mm (89)
  • 9.875 mm (15)
  • 9.951 mm (18)
  • 10.0 mm (77)
  • 10.025 mm (18)
  • 10.05 mm (12)
  • 11.0 mm (135)
  • 11.701 mm (22)
  • 12.0 mm (72)
  • 12.15 mm (24)
  • 12.701 mm (116)
  • 13.0 mm (79)
  • 14.0 mm (49)
  • 14.3 mm (61)
  • 14.601 mm (16)
  • 15.0 mm (86)
  • 15.5 mm (73)
  • 15.875 mm (148)
  • 16.0 mm (115)
  • 17.151 mm (15)
  • 17.401 mm (20)
  • 18.0 mm (141)
  • 19.0 mm (61)
  • 19.05 mm (194)
  • 20.0 mm (31)
  • 20.651 mm (24)
  • 22.0 mm (99)
  • 22.225 mm (76)
  • 23.8 mm (20)
  • 23.826 mm (15)
  • 24.0 mm (107)
  • 25.0 mm (30)
  • 25.401 mm (212)
  • 25.451 mm (13)
  • 26.0 mm (124)
  • 28.0 mm (15)
  • 28.576 mm (84)
  • 30.0 mm (104)
  • 31.75 mm (204)
  • 32.0 mm (142)
  • 36.0 mm (35)
  • 37.5 mm (53)
  • 38.0 mm (96)
  • 38.1 mm (277)
  • 40.0 mm (19)
  • 41.276 mm (63)
  • 44.45 mm (39)
  • 45.0 mm (76)
  • 47.625 mm (36)
  • 48.0 mm (32)
  • 50.0 mm (13)
  • 50.801 mm (90)
  • 57.151 mm (123)
  • 60.0 mm (28)
  • 63.5 mm (35)
  • 75.0 mm (30)
  • 76.2 mm (103)
  • 80.0 mm (11)
  • 82.551 mm (15)
  • 88.9 mm (14)
  • 101.601 mm (52)
  • 127.0 mm (24)
Cutting Length Min