successfully added to cart
View Cart

Notifications

Mark all as read

GOtap

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (781)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (781)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (781)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (738)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (738)
  • M Stainless Steel (792)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (792)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (749)
  • K Cast Iron (753)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (753)
  • N Non-Ferrous Materials (128)
    • N1
      Wrought Aluminum
      (113)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (128)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (113)
Select First Choice
  • BR (16)
  • CN (100)
  • DE (92)
  • GB (45)
  • IN (3)
  • SG (28)
  • US (267)
Applications
Applications
  • Pipe Thread Pipe Thread (43)
  • Tapping Blind Hole Tapping Blind Hole (468)
  • Tapping Through Hole Tapping Through Hole (341)
  • Threading Threading (809)
Cutting Length
Cutting Length
  • 5.0 mm (4)
  • 7.0 mm (20)
  • 8.0 mm (18)
  • 8.2 mm (1)
  • 9.0 mm (4)
  • 9.1 mm (1)
  • 9.5 mm (1)
  • 9.7 mm (47)
  • 9.9 mm (8)
  • 10.0 mm (20)
  • 10.1 mm (1)
  • 11.0 mm (9)
  • 11.5 mm (2)
  • 11.7 mm (1)
  • 12.0 mm (20)
  • 12.1 mm (1)
  • 12.2 mm (3)
  • 12.5 mm (3)
  • 12.7 mm (42)
  • 13.0 mm (35)
  • 13.2 mm (5)
  • 13.4 mm (1)
  • 14.2 mm (2)
  • 14.8 mm (10)
  • 14.9 mm (2)
  • 15.0 mm (58)
  • 15.8 mm (2)
  • 16.0 mm (42)
  • 17.0 mm (5)
  • 17.3 mm (3)
  • 17.48 mm (3)
  • 17.5 mm (42)
  • 18.0 mm (27)
  • 18.7 mm (3)
  • 18.9 mm (2)
  • 19.0 mm (7)
  • 19.05 mm (8)
  • 19.1 mm (34)
  • 20.0 mm (17)
  • 21.0 mm (21)
  • 22.0 mm (8)
  • 22.3 mm (8)
  • 22.4 mm (14)
  • 23.0 mm (4)
  • 23.9 mm (40)
  • 24.0 mm (23)
  • 25.0 mm (21)
  • 25.4 mm (17)
  • 26.19 mm (8)
  • 27.7 mm (41)
  • 28.0 mm (1)
  • 29.0 mm (1)
  • 30.0 mm (18)
  • 31.0 mm (14)
  • 33.0 mm (1)
  • 34.0 mm (5)
  • 34.93 mm (7)
  • 35.0 mm (7)
  • 36.0 mm (4)
  • 38.0 mm (1)
  • 38.1 mm (6)
  • 40.0 mm (8)
  • 42.0 mm (4)
  • 43.5 mm (4)
  • 44.45 mm (2)
  • 48.0 mm (2)
  • 50.0 mm (4)
  • 55.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.2 in (4)
  • 0.28 in (20)
  • 0.31 in (18)
  • 0.32 in (1)
  • 0.35 in (4)
  • 0.36 in (1)
  • 0.37 in (1)
  • 0.38 in (47)
  • 0.39 in (29)
  • 0.43 in (9)
  • 0.45 in (2)
  • 0.46 in (1)
  • 0.47 in (20)
  • 0.48 in (4)
  • 0.49 in (3)
  • 0.5 in (42)
  • 0.51 in (35)
  • 0.52 in (5)
  • 0.53 in (1)
  • 0.56 in (2)
  • 0.58 in (10)
  • 0.59 in (59)
  • 0.6 in (1)
  • 0.62 in (2)
  • 0.63 in (42)
  • 0.67 in (5)
  • 0.68 in (3)
  • 0.688 in (3)
  • 0.69 in (42)
  • 0.71 in (27)
  • 0.74 in (5)
  • 0.75 in (49)
  • 0.79 in (17)
  • 0.83 in (21)
  • 0.866 in (1)
  • 0.87 in (7)
  • 0.88 in (22)
  • 0.91 in (4)
  • 0.94 in (62)
  • 0.98 in (21)
  • 0.994 in (1)
  • 1.0 in (17)
  • 1.031 in (8)
  • 1.09 in (41)
  • 1.1 in (1)
  • 1.14 in (1)
  • 1.18 in (18)
  • 1.22 in (14)
  • 1.3 in (1)
  • 1.34 in (5)
  • 1.375 in (7)
  • 1.38 in (7)
  • 1.42 in (4)
  • 1.5 in (7)
  • 1.57 in (8)
  • 1.65 in (4)
  • 1.71 in (4)
  • 1.75 in (2)
  • 1.89 in (2)
  • 1.97 in (4)
  • 2.17 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • G Internal Thread Parallel (15)
  • M-Metric/ISO (334)
  • National Pipe Thread (16)
  • National Pipe Thread Fuel (12)
  • UNC (245)
  • UNF (169)
  • UNJ (18)
Thread Size
Thread Size
  • 1 - 11 (2)
  • 1 - 11 1/2 (2)
  • 1 - 12 (3)
  • 1 - 8 (7)
  • 1 1/2 - 12 (1)
  • 1 1/2 - 6 (2)
  • 1 1/4 - 12 (1)
  • 1 1/4 - 7 (3)
  • 1 1/8 - 12 (2)
  • 1 1/8 - 7 (4)
  • 1 3/4 - 5 (1)
  • 1 3/8 - 12 (1)
  • 1 3/8 - 6 (1)
  • 1/16 - 27 (3)
  • 1/2 - 13 (18)
  • 1/2 - 14 (6)
  • 1/2 - 20 (17)
  • 1/4 - 18 (4)
  • 1/4 - 19 (2)
  • 1/4 - 20 (23)
  • 1/4 - 28 (23)
  • 1/8 - 27 (8)
  • 1/8 - 28 (3)
  • 10 - 24 (19)
  • 10 - 32 (24)
  • 12 - 24 (2)
  • 12 - 28 (3)
  • 2 - 4 1/2 (1)
  • 2 - 56 (4)
  • 3 - 48 (2)
  • 3/4 - 10 (10)
  • 3/4 - 14 (5)
  • 3/4 - 16 (9)
  • 3/8 - 16 (20)
  • 3/8 - 18 (4)
  • 3/8 - 19 (2)
  • 3/8 - 24 (20)
  • 4 - 40 (22)
  • 4 - 48 (3)
  • 5 - 40 (3)
  • 5/16 - 18 (20)
  • 5/16 - 24 (20)
  • 5/8 - 11 (16)
  • 5/8 - 14 (1)
  • 5/8 - 18 (16)
  • 6 - 32 (23)
  • 6 - 40 (6)
  • 7/16 - 14 (11)
  • 7/16 - 20 (18)
  • 7/8 - 14 (4)
  • 7/8 - 9 (5)
  • 8 - 32 (27)
  • 8 - 36 (2)
  • 9/16 - 12 (8)
  • 9/16 - 18 (8)
  • M10 X 0,75 (2)
  • M10 X 1 (3)
  • M10 X 1,25 (7)
  • M10 X 1,5 (21)
  • M10 X 1,50 (3)
  • M12 X 1 (3)
  • M12 X 1,25 (7)
  • M12 X 1,5 (6)
  • M12 X 1,75 (19)
  • M14 X 1 (3)
  • M14 X 1,25 (3)
  • M14 X 1,5 (7)
  • M14 X 2 (12)
  • M16 X 1,5 (9)
  • M16 X 2 (13)
  • M16 X 2,0 (3)
  • M18 X 1,5 (6)
  • M18 X 2 (3)
  • M18 X 2,5 (7)
  • M2 X 0,4 (7)
  • M2,5 X 0,45 (4)
  • M20 X 1,5 (3)
  • M20 X 2 (3)
  • M20 X 2,5 (8)
  • M22 X 1,5 (3)
  • M22 X 2 (3)
  • M22 X 2,5 (4)
  • M24 X 1,5 (3)
  • M24 X 2 (2)
  • M24 X 3 (4)
  • M27 X 3 (3)
  • M3 X 0,5 (18)
  • M3,5 X 0,6 (4)
  • M30 X 1,5 (2)
  • M30 X 3,5 (4)
  • M33 X 3,5 (3)
  • M36 X 4 (4)
  • M4 X 0,7 (17)
  • M42 X 4,5 (2)
  • M5 X 0,8 (20)
  • M6 X 0,75 (3)
  • M6 X 1 (22)
  • M7 X 1 (7)
  • M8 X 1 (7)
  • M8 X 1,25 (24)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2B (83)
  • 3B (18)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6G-I (23)
  • 6H-I (226)
Tap PD Class
Tap PD Class
  • 0 (36)
  • 6G (8)
  • 6H (17)
  • D3 (7)
  • D4 (16)
  • D5 (26)
  • D6 (26)
  • D7 (10)
  • H2 (31)
  • H3 (162)
  • H4 (23)
  • H5 (66)
  • H6 (20)
  • H7 (29)
Tap Tolerance Class
Tap Tolerance Class
  • ISO 2 (225)
  • ISO 3 (24)
Number of Flutes
Number of Flutes
  • 2 (132)
  • 3 (522)
  • 4 (142)
  • 5 (12)
  • 6 (1)
application
Coating
Coating
  • Oxide (43)
  • TiN (13)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KSMN34 (28)
  • KSP32 (83)
  • KSP39 (565)
  • KSU30 (2)
  • KSU31 (131)
Tap Standard
Tap Standard
  • ANSI (416)
  • DIN 371 (122)
  • DIN 374 (91)
  • DIN 376 (129)
  • JIS (8)
Tap Type
Tap Type
  • 10 (14)
  • 11 (285)
  • 13 (1)
  • 8 (509)
frontEnd
Thread TPI
Thread TPI
  • 4.5 mm (1)
  • 5.0 mm (1)
  • 6.0 mm (3)
  • 7.0 mm (7)
  • 8.0 mm (7)
  • 9.0 mm (5)
  • 10.0 mm (10)
  • 11.0 mm (18)
  • 11.5 mm (2)
  • 12.0 mm (16)
  • 13.0 mm (18)
  • 14.0 mm (27)
  • 16.0 mm (29)
  • 18.0 mm (52)
  • 19.0 mm (4)
  • 20.0 mm (58)
  • 24.0 mm (61)
  • 27.0 mm (11)
  • 28.0 mm (29)
  • 32.0 mm (74)
  • 36.0 mm (2)
  • 40.0 mm (31)
  • 48.0 mm (5)
  • 56.0 mm (4)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 4.5 in (1)
  • 5.0 in (1)
  • 6.0 in (3)
  • 7.0 in (7)
  • 8.0 in (7)
  • 9.0 in (5)
  • 10.0 in (10)
  • 11.0 in (18)
  • 11.5 in (2)
  • 12.0 in (16)
  • 13.0 in (18)
  • 14.0 in (27)
  • 16.0 in (29)
  • 18.0 in (52)
  • 19.0 in (4)
  • 20.0 in (58)
  • 24.0 in (61)
  • 27.0 in (11)
  • 28.0 in (29)
  • 32.0 in (74)
  • 36.0 in (2)
  • 40.0 in (31)
  • 48.0 in (5)
  • 56.0 in (4)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.4 mm (7)
  • 0.45 mm (4)
  • 0.5 mm (21)
  • 0.6 mm (4)
  • 0.7 mm (17)
  • 0.75 mm (6)
  • 0.8 mm (20)
  • 1.0 mm (47)
  • 1.25 mm (41)
  • 1.5 mm (64)
  • 1.75 mm (19)
  • 2.0 mm (41)
  • 2.5 mm (19)
  • 3.0 mm (7)
  • 3.5 mm (7)
  • 4.0 mm (5)
  • 4.5 mm (2)
  • 5.0 mm (3)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.4 in (7)
  • 0.45 in (4)
  • 0.5 in (21)
  • 0.6 in (4)
  • 0.7 in (17)
  • 0.75 in (6)
  • 0.8 in (20)
  • 1.0 in (47)
  • 1.25 in (41)
  • 1.5 in (64)
  • 1.75 in (19)
  • 2.0 in (41)
  • 2.5 in (19)
  • 3.0 in (7)
  • 3.5 in (7)
  • 4.0 in (5)
  • 4.5 in (2)
  • 5.0 in (3)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (133)
  • PC (326)
  • PP (42)
  • SB (307)
  • TC (1)
backEnd
Back-End Diameter
Back-End Diameter
  • 2.8 mm (12)
  • 3.5 mm (16)
  • 3.581 mm (29)
  • 3.582 mm (34)
  • 4.0 mm (8)
  • 4.267 mm (31)
  • 4.5 mm (26)
  • 4.928 mm (42)
  • 5.0 mm (1)
  • 5.5 mm (1)
  • 5.588 mm (3)
  • 6.0 mm (43)
  • 6.2 mm (1)
  • 6.477 mm (43)
  • 7.0 mm (32)
  • 7.938 mm (7)
  • 8.0 mm (25)
  • 8.077 mm (45)
  • 8.204 mm (22)
  • 8.5 mm (1)
  • 9.0 mm (29)
  • 9.322 mm (33)
  • 9.332 mm (7)
  • 9.677 mm (28)
  • 9.678 mm (13)
  • 10.0 mm (17)
  • 10.897 mm (17)
  • 11.0 mm (27)
  • 11.113 mm (4)
  • 12.0 mm (22)
  • 12.192 mm (38)
  • 13.767 mm (3)
  • 14.0 mm (16)
  • 14.288 mm (4)
  • 14.986 mm (14)
  • 16.0 mm (18)
  • 17.463 mm (4)
  • 17.686 mm (1)
  • 17.704 mm (3)
  • 17.78 mm (4)
  • 18.0 mm (28)
  • 20.0 mm (6)
  • 20.32 mm (6)
  • 22.0 mm (14)
  • 22.733 mm (2)
  • 22.758 mm (1)
  • 23.02 mm (3)
  • 25.0 mm (5)
  • 25.926 mm (1)
  • 28.0 mm (9)
  • 28.575 mm (2)
  • 32.0 mm (3)
  • 36.0 mm (3)
  • 40.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.1102 in (12)
  • 0.1378 in (16)
  • 0.141 in (63)
  • 0.157 in (2)
  • 0.1575 in (6)
  • 0.168 in (31)
  • 0.1772 in (26)
  • 0.194 in (42)
  • 0.1969 in (1)
  • 0.2165 in (1)
  • 0.22 in (3)
  • 0.2362 in (43)
  • 0.2441 in (1)
  • 0.255 in (43)
  • 0.2756 in (29)
  • 0.276 in (3)
  • 0.3125 in (7)
  • 0.315 in (25)
  • 0.318 in (45)
  • 0.323 in (22)
  • 0.3346 in (1)
  • 0.3543 in (29)
  • 0.367 in (40)
  • 0.381 in (41)
  • 0.3937 in (17)
  • 0.429 in (17)
  • 0.433 in (2)
  • 0.4331 in (25)
  • 0.4375 in (4)
  • 0.472 in (2)
  • 0.4724 in (20)
  • 0.48 in (38)
  • 0.542 in (3)
  • 0.5512 in (16)
  • 0.5625 in (4)
  • 0.59 in (14)
  • 0.6299 in (16)
  • 0.63 in (2)
  • 0.6875 in (4)
  • 0.6963 in (1)
  • 0.697 in (3)
  • 0.7 in (4)
  • 0.7087 in (27)
  • 0.709 in (1)
  • 0.787 in (2)
  • 0.7874 in (4)
  • 0.8 in (6)
  • 0.866 in (1)
  • 0.8661 in (13)
  • 0.895 in (2)
  • 0.896 in (1)
  • 0.9063 in (3)
  • 0.984 in (2)
  • 0.9843 in (3)
  • 1.0207 in (1)
  • 1.1024 in (9)
  • 1.125 in (2)
  • 1.2598 in (3)
  • 1.4173 in (3)
  • 1.5748 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Tarauds hautes performances

Tarauds à entrée hélicoïdale HSS-E GOtap™ T820 • Trous débouchants
(132 Products)
  • Taraudage : trou débouchantTaraudage : trou débouchant
  • 3861838618
  • Forme de chanfrein : Taraud moyen (3-5)Forme de chanfrein : Taraud moyen (3-5)
  • Arrosage externe : TaraudageArrosage externe : Taraudage
  • Spécifications fabricant : ANSISpécifications fabricant : ANSI
  • Spécifications fabricant : UNCSpécifications fabricant : UNC
  • Spécifications fabricant : UNFSpécifications fabricant : UNF
  • Multipurpose Taps: Spiral PointMultipurpose Taps: Spiral Point
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Tap Pitch Diameter Limit
5455861 T820NC#08-32RH3-A T820NC#08-32RH3-A KSP39 8 - 32 53.8000 2.120 9.7000 .3800 19.3000 .7600 4.267 .168 2 H3  
    List price:
    $22.96 /each.
    Your price::
    Qty
    5455869 T820NC#10-24RH3-A T820NC#10-24RH3-A KSP39   10 - 24 60.2000 2.370 12.7000 .5000 23.2000 .9100 4.928 .194 2 H3
      List price:
      $22.96 /each.
      Your price::
      Qty
      5455867 T820NC#10-24RH3-A T820NC#10-24RH3-A KSP32 10 - 24 60.2000 2.370 12.7000 .5000 23.2000 .9100 4.928 .194 2 H3  
        List price:
        $29.87 /each.
        Your price::
        Qty
        5455846 T820NF#06-40RH2-A T820NF#06-40RH2-A KSP39 6 - 40 50.5000 1.990 9.7000 .3800 18.0000 .7100 3.581 .141 2 H2  
          List price:
          $22.96 /each.
          Your price::
          Qty
          5455866 T820NF#08-36RH2-A T820NF#08-36RH2-A KSP39 8 - 36 53.7000 2.110 9.7000 .3800 19.3000 .7600 4.267 .168 2 H2  
            List price:
            $22.96 /each.
            Your price::
            Qty
            5455883 T820NF#10-32RH3-A T820NF#10-32RH3-A KSP39 10 - 32 60.0000 2.360 12.7000 .5000 23.0000 .9100 4.928 .194 2 H3  
              List price:
              $22.96 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Tarauds polyvalents

              Tarauds HSS-E à goujures hélicoïdales T830 GOtap™ • Trous borgnes
              (49 Products)
              • Taraudage : trou borgneTaraudage : trou borgne
              • 3861838618
              • Chanfrein Forme C (2–3)Chanfrein Forme C (2–3)
              • Angle d'hélice : 45°Angle d'hélice : 45°
              • DIN 371DIN 371
              • DIN 374DIN 374
              • DIN 376DIN 376
              • Arrosage externe : TaraudageArrosage externe : Taraudage
              • Classe de tolérance : 6HClasse de tolérance : 6H
              • Classe de tolérance : 6GClasse de tolérance : 6G
              • Spécifications fabricant : MSpécifications fabricant : M
              • Spécifications fabricant : MFSpécifications fabricant : MF
              • Manufacturer’s Specs: ISO 2Manufacturer’s Specs: ISO 2
              • Manufacturer’s Specs: ISO 3Manufacturer’s Specs: ISO 3
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
              5417283 T830M035X060R6H-D1 T830M035X060R6H-D1 KSP39   M3,5 X 0,6 56.0000 2.200 9.0000 .3500 20.0000 .7900 4.0 .1575 2 DIN 371 6H-I
                List price:
                $57.80 /each.
                Your price::
                Qty
                5417285 T830M040X070R6H-D1 T830M040X070R6H-D1 KSP39 M4 X 0,7 63.0000 2.480 11.0000 .4300 21.0000 .8300 4.5 .1772 3 DIN 371 6H-I  
                  List price:
                  $57.80 /each.
                  Your price::
                  Qty
                  5417294 T830M080X125R6H-D1 T830M080X125R6H-D1 KSP32 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.0 .315 3 DIN 371 6H-I  
                    List price:
                    $71.70 /each.
                    Your price::
                    Qty
                    5417295 T830M080X125R6H-D1 T830M080X125R6H-D1 KSP39 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.0 .315 3 DIN 371 6H-I  
                      List price:
                      $62.64 /each.
                      Your price::
                      Qty
                      5417300 T830M100X150R6H-D1 T830M100X150R6H-D1 KSP39 M10 X 1,5 100.0000 3.940 18.0000 .7100 39.0000 1.540 10.0 .3937 3 DIN 371 6H-I  
                        List price:
                        $88.38 /each.
                        Your price::
                        Qty
                        5417299 T830M100X150R6H-D1 T830M100X150R6H-D1 KSP32 M10 X 1,5 100.0000 3.940 18.0000 .7100 39.0000 1.540 10.0 .3937 3 DIN 371 6H-I  
                          List price:
                          $101.21 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          Tarauds polyvalents

                          Tarauds HSS-E à goujures hélicoïdales T832 GOtap™ • Trous borgnes
                          (8 Products)
                          • Taraudage : trou borgneTaraudage : trou borgne
                          • 3861838618
                          • Chanfrein Forme E (1,5-2)Chanfrein Forme E (1,5-2)
                          • Angle d'hélice : 45°Angle d'hélice : 45°
                          • DIN 371DIN 371
                          • DIN 374DIN 374
                          • DIN 376DIN 376
                          • Arrosage externe : TaraudageArrosage externe : Taraudage
                          • Classe de tolérance : 6HClasse de tolérance : 6H
                          • Spécifications fabricant : MSpécifications fabricant : M
                          • Spécifications fabricant : MFSpécifications fabricant : MF
                          • Manufacturer’s Specs: ISO 2Manufacturer’s Specs: ISO 2
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
                          5417385 T832M080X125R6H-D1 T832M080X125R6H-D1 KSP39 M8 X 1,25 90.0000 3.540 15.0000 .5900 35.0000 1.380 8.0 .315 3 DIN 371 6H-I  
                            List price:
                            $62.64 /each.
                            Your price::
                            Qty
                            5417398 T832M120X175R6H-D6 T832M120X175R6H-D6 KSP39 M12 X 1,75 110.0000 4.330 21.0000 .8300 44.0000 1.730 9.0 .3543 3 DIN 376 6H-I  
                              List price:
                              $106.46 /each.
                              Your price::
                              Qty