successfully added to cart
View Cart

Notifications

Mark all as read

PSC 50

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (119)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (119)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (119)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (119)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (119)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (119)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (119)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (119)
  • M Stainless Steel (119)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (119)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (119)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (119)
  • K Cast Iron (119)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (119)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (119)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (119)
  • N Non-Ferrous Materials (117)
    • N1
      Wrought Aluminum
      (115)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (115)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (77)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (116)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (115)
    • N6
      Carbon, Graphite Composites, CFRP
      (103)
    • N7
      MMC's
      (110)
  • S High-Temp Alloys (119)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (119)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (119)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (119)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (119)
  • H Hardened Materials (104)
    • H1
      Hardened Materials 44-48 HRC
      (104)
    • H2
      Hardened Materials 48-55 HRC
      (95)
    • H3
      Hardened Materials 56-60 HRC
      (89)
    • H4
      Hardened Materials >60 HRC
      (87)
Applications
Applications
  • Facing Facing (94)
  • Grooving Grooving (8)
  • ID Facing ID Facing (88)
  • ID Grooving ID Grooving (12)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (94)
  • OD Thread Turning OD Thread Turning (4)
  • Plunge Turning Plunge Turning (42)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (88)
  • Turning Turning (94)
Type of Thread
Type of Thread
  • 55 (10)
  • 60 (25)
  • ACME (23)
  • API (16)
  • API BUTTRESS (3)
  • API RD (17)
  • BSPT (7)
  • BSW (20)
  • BUTTRESS (15)
  • M (22)
  • NPT (17)
  • NPTF (7)
  • RD DIN 405 (10)
  • STUB ACME (20)
  • TR DIN 103 (10)
  • UN (22)
  • UNJ (17)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (105)
  • Interrupted (55)
  • Lightly Interrupted Cut (105)
  • Smooth Cut (105)
  • Varying Depth of Cut (105)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (4)
  • 62.5 (1)
  • 72.5 (1)
  • 75.0 (8)
  • 90.0 (25)
  • 93.0 (32)
  • 95.0 (37)
  • 107.5 (11)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (75)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (82)
  • 2.0 (97)
  • 3.0 (13)
  • 4.0 (69)
  • 6.0 (5)
  • 8.0 (37)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (3)
  • 0.0012 in (3)
  • 0.0015 in (25)
  • 0.002 in (11)
  • 0.0023 in (6)
  • 0.0026 in (10)
  • 0.0028 in (6)
  • 0.003 in (20)
  • 0.0031 in (13)
  • 0.0032 in (4)
  • 0.0033 in (1)
  • 0.0034 in (1)
  • 0.0035 in (2)
  • 0.0037 in (10)
  • 0.0038 in (9)
  • 0.0039 in (1)
  • 0.004 in (87)
  • 0.0043 in (3)
  • 0.0046 in (10)
  • 0.005 in (10)
  • 0.0052 in (10)
  • 0.0053 in (11)
  • 0.0059 in (10)
  • 0.006 in (15)
  • 0.0062 in (10)
  • 0.0063 in (4)
  • 0.0065 in (13)
  • 0.0068 in (10)
  • 0.007 in (11)
  • 0.0075 in (15)
  • 0.0078 in (13)
  • 0.0079 in (7)
  • 0.008 in (78)
  • 0.0083 in (23)
  • 0.0088 in (11)
  • 0.0093 in (10)
  • 0.0094 in (1)
  • 0.0096 in (4)
  • 0.0099 in (10)
  • 0.01 in (15)
  • 0.0106 in (11)
  • 0.011 in (2)
  • 0.0111 in (10)
  • 0.0112 in (10)
  • 0.0118 in (10)
  • 0.012 in (1)
  • 0.0122 in (1)
  • 0.0124 in (10)
  • 0.0125 in (14)
  • 0.013 in (24)
  • 0.0135 in (13)
  • 0.014 in (10)
  • 0.015 in (1)
  • 0.0156 in (85)
  • 0.0158 in (1)
  • 0.0159 in (10)
  • 0.016 in (55)
  • 0.017 in (13)
  • 0.0175 in (13)
  • 0.0186 in (4)
  • 0.0193 in (10)
  • 0.0197 in (2)
  • 0.02 in (10)
  • 0.021 in (2)
  • 0.022 in (2)
  • 0.0225 in (13)
  • 0.0276 in (3)
  • 0.0295 in (2)
  • 0.0298 in (1)
  • 0.031 in (76)
  • 0.0311 in (8)
  • 0.0312 in (78)
  • 0.0313 in (92)
  • 0.0315 in (31)
  • 0.0355 in (13)
  • 0.0369 in (3)
  • 0.0394 in (12)
  • 0.0468 in (14)
  • 0.0469 in (91)
  • 0.047 in (65)
  • 0.0472 in (21)
  • 0.0492 in (12)
  • 0.0516 in (3)
  • 0.0591 in (12)
  • 0.0623 in (4)
  • 0.0625 in (78)
  • 0.063 in (49)
  • 0.0689 in (12)
  • 0.078 in (10)
  • 0.0787 in (13)
  • 0.0886 in (13)
  • 0.0938 in (16)
  • 0.094 in (24)
  • 0.0984 in (3)
  • 0.106 in (6)
  • 0.125 in (3)
  • 0.126 in (4)
  • 0.1563 in (18)
  • 0.25 in (2)
  • 0.312 in (14)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.03 mm (6)
  • 0.038 mm (25)
  • 0.051 mm (11)
  • 0.056 mm (2)
  • 0.057 mm (6)
  • 0.066 mm (10)
  • 0.07 mm (5)
  • 0.076 mm (20)
  • 0.08 mm (16)
  • 0.081 mm (3)
  • 0.089 mm (2)
  • 0.094 mm (10)
  • 0.097 mm (9)
  • 0.1 mm (71)
  • 0.102 mm (49)
  • 0.108 mm (3)
  • 0.116 mm (4)
  • 0.117 mm (6)
  • 0.127 mm (10)
  • 0.131 mm (10)
  • 0.132 mm (10)
  • 0.133 mm (10)
  • 0.15 mm (10)
  • 0.152 mm (15)
  • 0.157 mm (10)
  • 0.16 mm (6)
  • 0.165 mm (13)
  • 0.173 mm (10)
  • 0.178 mm (11)
  • 0.19 mm (15)
  • 0.191 mm (15)
  • 0.198 mm (10)
  • 0.2 mm (74)
  • 0.202 mm (12)
  • 0.203 mm (41)
  • 0.21 mm (5)
  • 0.224 mm (10)
  • 0.235 mm (10)
  • 0.244 mm (4)
  • 0.25 mm (12)
  • 0.251 mm (10)
  • 0.254 mm (15)
  • 0.269 mm (11)
  • 0.282 mm (10)
  • 0.284 mm (10)
  • 0.3 mm (10)
  • 0.315 mm (10)
  • 0.318 mm (14)
  • 0.33 mm (10)
  • 0.34 mm (24)
  • 0.343 mm (3)
  • 0.356 mm (10)
  • 0.397 mm (77)
  • 0.4 mm (85)
  • 0.404 mm (10)
  • 0.406 mm (10)
  • 0.43 mm (10)
  • 0.432 mm (3)
  • 0.445 mm (13)
  • 0.472 mm (4)
  • 0.49 mm (10)
  • 0.508 mm (10)
  • 0.57 mm (6)
  • 0.572 mm (13)
  • 0.575 mm (7)
  • 0.6 mm (3)
  • 0.7 mm (3)
  • 0.787 mm (12)
  • 0.79 mm (3)
  • 0.791 mm (8)
  • 0.792 mm (32)
  • 0.794 mm (70)
  • 0.8 mm (92)
  • 0.902 mm (13)
  • 0.936 mm (3)
  • 1.0 mm (12)
  • 1.188 mm (14)
  • 1.19 mm (18)
  • 1.191 mm (56)
  • 1.194 mm (12)
  • 1.195 mm (6)
  • 1.2 mm (91)
  • 1.25 mm (12)
  • 1.5 mm (12)
  • 1.585 mm (10)
  • 1.587 mm (18)
  • 1.588 mm (50)
  • 1.6 mm (63)
  • 1.75 mm (12)
  • 1.98 mm (6)
  • 1.981 mm (10)
  • 2.0 mm (13)
  • 2.25 mm (13)
  • 2.38 mm (4)
  • 2.388 mm (13)
  • 2.39 mm (3)
  • 2.4 mm (14)
  • 2.5 mm (3)
  • 3.175 mm (3)
  • 3.2 mm (4)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HK1500 (66)
  • K10M (68)
  • K10U (65)
  • K15U (65)
  • K25M (69)
  • K313 (105)
  • K68 (98)
  • KB9610 (65)
  • KBH10 (65)
  • KBH20 (69)
  • KC5010 (115)
  • KC5025 (115)
  • KC5410 (93)
  • KC720 (83)
  • KC730 (100)
  • KC7310 (70)
  • KC732 (69)
  • KC8050 (94)
  • KC810 (105)
  • KC850 (107)
  • KC9010 (78)
  • KC9025 (94)
  • KC910 (92)
  • KC9105 (90)
  • KC9110 (109)
  • KC9120 (91)
  • KC9125 (94)
  • KC9140 (68)
  • KC9215 (66)
  • KC9225 (92)
  • KC9240 (88)
  • KC9240NEW (88)
  • KC9245 (66)
  • KC9315 (94)
  • KC9320 (103)
  • KC9325 (77)
  • KC935 (109)
  • KC950 (97)
  • KC990 (80)
  • KCK05 (94)
  • KCK05B (81)
  • KCK15 (87)
  • KCK15B (94)
  • KCK20 (101)
  • KCK20B (103)
  • KCM15 (88)
  • KCM15B (92)
  • KCM25 (92)
  • KCM25B (86)
  • KCM35 (78)
  • KCP05 (83)
  • KCP05B (71)
  • KCP10 (94)
  • KCP10B (109)
  • KCP25 (94)
  • KCP25B (109)
  • KCP30 (90)
  • KCP40B (67)
  • KCS10B (88)
  • KCU10 (109)
  • KCU25 (105)
  • KT175 (74)
  • KT315 (96)
  • KU10T (90)
  • KU30T (103)
  • THM (74)
  • TN10P (96)
  • TN10U (65)
  • TN15M (78)
  • TN2000 (66)
  • TN20K (80)
  • TN20P (90)
  • TN30M (86)
  • TN5015 (70)
  • TN5020 (77)
  • TN5120 (79)
  • TN6025 (74)
  • TN7005 (68)
  • TN7010 (83)
  • TN7015 (83)
  • TN7025 (83)
  • TN7035 (71)
  • TN7105 (67)
  • TN7110 (94)
  • TN7115 (79)
  • TN7125 (79)
  • TN7135 (71)
  • TN8025 (71)
  • WK05CT (78)
  • WK20CT (88)
  • WM15CT (86)
  • WM25CT (86)
  • WP15CT (88)
  • WP25CT (88)
  • WP35CT (88)
  • WS10PT (73)
  • WS25PT (75)
  • WU10HT (90)
  • WU10PT (75)
  • WU25PT (79)
Hand Of Tool
Hand Of Tool
  • L (34)
  • N (2)
  • R (39)
Wiper Insert
Wiper Insert
  • N (119)
  • Y (66)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 20.0 mm (6)
  • 24.0 mm (1)
  • 25.0 mm (5)
  • 32.0 mm (14)
  • 33.0 mm (3)
  • 33.5 mm (1)
  • 38.5 mm (2)
  • 40.0 mm (6)
  • 41.3 mm (2)
  • 47.6 mm (2)
  • 48.5 mm (1)
  • 50.0 mm (7)
  • 52.5 mm (1)
  • 57.2 mm (1)
  • 62.0 mm (3)
  • 63.0 mm (7)
  • 64.0 mm (2)
  • 65.0 mm (6)
  • 65.5 mm (1)
  • 66.0 mm (1)
  • 80.0 mm (2)
  • 88.9 mm (2)
  • 110.0 mm (27)
  • 125.0 mm (7)
  • 139.7 mm (2)
  • 165.0 mm (1)
  • 174.6 mm (2)
  • 209.6 mm (1)
  • 222.3 mm (1)
  • 223.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 0.7874 in (6)
  • 0.9449 in (1)
  • 0.9843 in (5)
  • 1.2598 in (14)
  • 1.2992 in (3)
  • 1.3189 in (1)
  • 1.5157 in (2)
  • 1.5748 in (6)
  • 1.626 in (2)
  • 1.874 in (2)
  • 1.9094 in (1)
  • 1.9685 in (7)
  • 2.0669 in (1)
  • 2.252 in (1)
  • 2.4409 in (3)
  • 2.4803 in (7)
  • 2.5197 in (2)
  • 2.5591 in (6)
  • 2.5787 in (1)
  • 2.5984 in (1)
  • 3.1496 in (2)
  • 3.5 in (2)
  • 4.3307 in (27)
  • 4.9213 in (7)
  • 5.5 in (2)
  • 6.4961 in (1)
  • 6.874 in (2)
  • 8.252 in (1)
  • 8.752 in (1)
  • 8.7795 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (15)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (15)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (23)
  • E (27)
  • S (25)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (42)
  • NEGATIVE-ZERO (15)
  • NEUTRAL (ZERO) (8)
Maximum Bore Depth
Maximum Bore Depth
  • 1.4173 in (3)
  • 1.811 in (3)
  • 1.8504 in (2)
  • 1.9685 in (1)
  • 2.0079 in (1)
  • 2.0472 in (8)
  • 2.2047 in (4)
  • 2.3622 in (34)
  • 2.4409 in (2)
  • 2.5197 in (3)
  • 2.5591 in (2)
  • 2.5984 in (5)
  • 2.6378 in (10)
  • 3.1496 in (1)
  • 3.4646 in (6)
  • 3.4803 in (1)
  • 3.937 in (2)
  • 4.4488 in (2)
  • 4.6457 in (2)
  • 4.685 in (4)
  • 5.9055 in (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 36.0 mm (3)
  • 46.0 mm (3)
  • 47.0 mm (2)
  • 50.0 mm (1)
  • 51.0 mm (1)
  • 52.0 mm (8)
  • 56.0 mm (4)
  • 60.0 mm (34)
  • 62.0 mm (2)
  • 64.0 mm (3)
  • 65.0 mm (2)
  • 66.0 mm (5)
  • 67.0 mm (10)
  • 80.0 mm (1)
  • 88.0 mm (6)
  • 88.4 mm (1)
  • 100.0 mm (2)
  • 113.0 mm (2)
  • 118.0 mm (2)
  • 119.0 mm (4)
  • 150.0 mm (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (62)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (8)
  • END MILL ADAPTER (8)
  • ER COLLET CHUCK (8)
  • EXTENSION (2)
  • HYDRAULIC CHUCK (18)
  • MODULAR ADAPTER (5)
  • RC TAP CHUCK ADAPTER-T & C (1)
  • SHELL MILL ADAPTER (5)
  • SQUARE SHANK ADAPTER (7)
Clamp Style
Clamp Style
  • D (41)
  • N (19)
  • P (27)
  • S (32)
Cutting Width
Cutting Width
  • 0.0197 in (2)
  • 0.031 in (2)
  • 0.0315 in (2)
  • 0.035 in (2)
  • 0.039 in (2)
  • 0.0394 in (12)
  • 0.041 in (2)
  • 0.047 in (12)
  • 0.0472 in (12)
  • 0.055 in (2)
  • 0.0551 in (2)
  • 0.058 in (2)
  • 0.0591 in (12)
  • 0.062 in (12)
  • 0.0669 in (2)
  • 0.067 in (2)
  • 0.0689 in (12)
  • 0.072 in (10)
  • 0.076 in (2)
  • 0.0768 in (2)
  • 0.077 in (2)
  • 0.078 in (10)
  • 0.0787 in (12)
  • 0.079 in (6)
  • 0.0866 in (12)
  • 0.088 in (12)
  • 0.0886 in (8)
  • 0.094 in (12)
  • 0.097 in (10)
  • 0.0984 in (12)
  • 0.105 in (10)
  • 0.108 in (12)
  • 0.1083 in (12)
  • 0.11 in (10)
  • 0.118 in (12)
  • 0.1181 in (15)
  • 0.122 in (10)
  • 0.125 in (15)
  • 0.126 in (15)
  • 0.1278 in (2)
  • 0.128 in (12)
  • 0.129 in (2)
  • 0.131 in (4)
  • 0.1378 in (15)
  • 0.142 in (10)
  • 0.147 in (2)
  • 0.15 in (2)
  • 0.151 in (2)
  • 0.156 in (10)
  • 0.157 in (10)
  • 0.1574 in (13)
  • 0.1575 in (13)
  • 0.167 in (13)
  • 0.1673 in (10)
  • 0.169 in (10)
  • 0.1771 in (13)
  • 0.1772 in (13)
  • 0.178 in (10)
  • 0.185 in (13)
  • 0.188 in (13)
  • 0.189 in (13)
  • 0.192 in (4)
  • 0.193 in (4)
  • 0.195 in (10)
  • 0.1969 in (3)
  • 0.197 in (3)
  • 0.202 in (3)
  • 0.213 in (3)
  • 0.2165 in (3)
  • 0.219 in (3)
  • 0.2362 in (3)
  • 0.25 in (3)
  • 0.255 in (3)
  • 1.93 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (2)
  • 0.787 mm (2)
  • 0.8 mm (2)
  • 0.889 mm (2)
  • 0.991 mm (2)
  • 1.0 mm (12)
  • 1.041 mm (2)
  • 1.19 mm (8)
  • 1.194 mm (12)
  • 1.199 mm (2)
  • 1.2 mm (12)
  • 1.39 mm (2)
  • 1.397 mm (2)
  • 1.4 mm (2)
  • 1.473 mm (2)
  • 1.5 mm (12)
  • 1.56 mm (2)
  • 1.57 mm (10)
  • 1.575 mm (12)
  • 1.69 mm (2)
  • 1.7 mm (2)
  • 1.702 mm (2)
  • 1.75 mm (12)
  • 1.829 mm (10)
  • 1.94 mm (2)
  • 1.95 mm (2)
  • 1.956 mm (2)
  • 1.981 mm (10)
  • 2.0 mm (12)
  • 2.007 mm (2)
  • 2.2 mm (12)
  • 2.235 mm (12)
  • 2.24 mm (6)
  • 2.25 mm (8)
  • 2.388 mm (12)
  • 2.39 mm (6)
  • 2.464 mm (10)
  • 2.5 mm (12)
  • 2.667 mm (10)
  • 2.74 mm (2)
  • 2.743 mm (12)
  • 2.75 mm (12)
  • 2.794 mm (10)
  • 2.997 mm (12)
  • 3.0 mm (15)
  • 3.099 mm (10)
  • 3.17 mm (10)
  • 3.175 mm (15)
  • 3.2 mm (15)
  • 3.245 mm (2)
  • 3.25 mm (10)
  • 3.251 mm (12)
  • 3.27 mm (2)
  • 3.32 mm (4)
  • 3.329 mm (4)
  • 3.5 mm (15)
  • 3.607 mm (10)
  • 3.73 mm (2)
  • 3.81 mm (2)
  • 3.84 mm (2)
  • 3.96 mm (10)
  • 3.962 mm (10)
  • 3.974 mm (4)
  • 3.988 mm (10)
  • 4.0 mm (13)
  • 4.242 mm (13)
  • 4.25 mm (10)
  • 4.3 mm (10)
  • 4.5 mm (13)
  • 4.521 mm (10)
  • 4.6 mm (4)
  • 4.699 mm (13)
  • 4.775 mm (13)