Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Tournage dans le ferroviaire

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (166)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (165)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (165)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (165)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (166)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (166)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (165)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (165)
  • M Stainless Steel (26)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (26)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (26)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (26)
  • K Cast Iron (160)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (155)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (160)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (160)
  • N Non-Ferrous Materials (19)
    • N1
      Wrought Aluminum
      (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (18)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (19)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (25)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (25)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (25)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (25)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (23)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
    • H2
      Hardened Materials 48-55 HRC
      (20)
    • H3
      Hardened Materials 56-60 HRC
      (20)
Select First Choice
  • IN (3)
Applications
Applications
  • CRT Profiling CRT Profiling (6)
  • Facing Facing (29)
  • ID Facing ID Facing (10)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (31)
  • Profiling Profiling (14)
  • Turning Turning (29)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (26)
  • Interrupted (10)
  • Lightly Interrupted Cut (42)
  • Smooth Cut (53)
  • Varying Depth of Cut (35)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 75.0 (4)
  • 90.0 (24)
  • 93.0 (4)
  • 95.0 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (2)
  • Toolholder (28)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (137)
  • 1.0 (25)
  • 2.0 (8)
  • 4.0 (13)
  • 8.0 (12)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (13)
  • 0.047 in (21)
  • 0.063 in (17)
  • 0.094 in (18)
  • 0.125 in (1)
  • 0.126 in (1)
  • 0.156 in (1)
  • 0.157 in (16)
  • 0.188 in (4)
  • 0.197 in (4)
  • 0.237 in (5)
  • 0.311 in (2)
  • 0.315 in (4)
  • 0.375 in (2)
  • 0.394 in (6)
  • 0.492 in (11)
  • 0.5 in (2)
  • 0.63 in (8)
  • 0.8 in (10)
  • 1.191 in (2)
  • 1.2 in (10)
  • 1.588 in (10)
  • 1.6 in (10)
  • 2.4 in (12)
  • 3.2 in (4)
  • 4.0 in (11)
  • 4.763 in (1)
  • 5.0 in (8)
  • 6.0 in (5)
  • 7.94 in (3)
  • 8.0 in (3)
  • 10.0 in (4)
  • 12.5 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (23)
  • 1.191 mm (2)
  • 1.2 mm (10)
  • 1.201 mm (21)
  • 1.588 mm (10)
  • 1.6 mm (27)
  • 2.4 mm (12)
  • 2.401 mm (18)
  • 3.176 mm (1)
  • 3.2 mm (5)
  • 3.975 mm (1)
  • 4.0 mm (27)
  • 4.763 mm (1)
  • 4.775 mm (4)
  • 5.0 mm (12)
  • 6.0 mm (10)
  • 7.9 mm (2)
  • 7.94 mm (3)
  • 8.0 mm (7)
  • 9.525 mm (2)
  • 10.0 mm (10)
  • 12.5 mm (15)
  • 12.701 mm (2)
  • 16.0 mm (8)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (145)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (145)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (3)
  • Lightly Interrupted Cut (19)
  • Smooth Cut (30)
  • Varying Depth of Cut (12)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (16)
  • AC5 (6)
  • CG4 (4)
  • CL4 (16)
  • CM2 (2)
  • CM3 (23)
  • CM5 (12)
  • CPX (17)
  • GX (14)
  • K090 (10)
  • K1 (10)
  • K10M (10)
  • K10P (8)
  • K20K (10)
  • K21 (10)
  • K25P (10)
  • K313 (18)
  • K35P (2)
  • K40 (11)
  • K420 (16)
  • K68 (19)
  • KC210 (10)
  • KC250 (10)
  • KC5010 (21)
  • KC5025 (17)
  • KC5115RR (2)
  • KC5125RR (2)
  • KC5410 (14)
  • KC5510 (10)
  • KC720 (2)
  • KC730 (18)
  • KC7310 (10)
  • KC732 (4)
  • KC8050 (25)
  • KC810 (11)
  • KC850 (22)
  • KC9010 (12)
  • KC9025 (12)
  • KC910 (14)
  • KC9105 (8)
  • KC9110 (37)
  • KC9110RR (1)
  • KC9115RR (2)
  • KC9120 (10)
  • KC9125 (38)
  • KC9125RR (2)
  • KC9140 (12)
  • KC9145 (10)
  • KC9215 (10)
  • KC9225 (10)
  • KC9240 (22)
  • KC9240NEW (22)
  • KC9245 (10)
  • KC9315 (31)
  • KC9320 (13)
  • KC9325 (10)
  • KC935 (10)
  • KC950 (11)
  • KC990 (10)
  • KCD25 (1)
  • KCK05 (10)
  • KCK05B (10)
  • KCK15 (16)
  • KCK15B (22)
  • KCK20 (23)
  • KCK20B (18)
  • KCM15 (10)
  • KCM15B (8)
  • KCM25 (20)
  • KCM25B (15)
  • KCM35 (10)
  • KCM35B (10)
  • KCP10 (62)
  • KCP10B (48)
  • KCP25 (83)
  • KCP25B (56)
  • KCP30 (27)
  • KCP30B (19)
  • KCP40 (12)
  • KCP40B (12)
  • KCPK05 (25)
  • KCS10 (12)
  • KCS10B (17)
  • KCU10 (21)
  • KCU25 (21)
  • KM1 (6)
  • KU30T (10)
  • KY1320 (8)
  • KY1540 (8)
  • KY1615 (20)
  • KY2000 (8)
  • KY3000 (10)
  • KY3400 (10)
  • KY3500 (10)
  • KY4300 (8)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK25 (8)
  • KYK35 (10)
  • KYS25 (8)
  • KYS30 (8)
  • MC2 (7)
  • NL250 (10)
  • NL300 (13)
  • NL400 (8)
  • NL920 (4)
  • SP0819 (10)
  • SP3019 (10)
  • SP4019 (8)
  • SPADAP (10)
  • TN7035 (3)
Hand Of Tool
Hand Of Tool
  • L (10)
  • N (9)
  • R (11)
Wiper Insert
Wiper Insert
  • N (166)
  • Y (9)
Cutting Direction
Cutting Direction
  • B (8)
  • E (8)
  • S (14)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (13)
  • NEUTRAL (ZERO) (15)
frontEnd
Adapter Front-End
Adapter Front-End
  • KM MODULAR ADAPTER (5)
Clamp Style
Clamp Style
  • M (6)
  • P (9)
  • X (25)
Front End Type
Front End Type
  • KMT - KM Adapter (5)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (26)
  • L-RECTANGLE 90 (16)
  • L-RECTANGLE ON EDGE 90 (17)
  • O-OCTOGON 135 (1)
  • R-ROUND (55)
  • S-SQUARE 90 (37)
  • T-TRIANGLE 60 (23)
Cartridge Size
Cartridge Size
  • 0 (10)
Front End Style
Front End Style
  • KMT00 All KM, except 02,05,09 (5)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.63 in (1)
  • 0.946 in (2)
  • 1.26 in (1)
  • 1.299 in (1)
  • 1.581 in (2)
  • 3.071 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 16.0 mm (1)
  • 24.0 mm (2)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 40.151 mm (2)
  • 78.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 0.787 in (1)
  • 1.181 in (1)
  • 1.575 in (1)
  • 1.969 in (1)
  • 2.205 in (1)
Gage Length
Gage Length
  • 20 mm (1)
  • 30 mm (1)
  • 40 mm (1)
  • 50 mm (1)
  • 56 mm (1)
Front End Size
Front End Size
  • 0.049 in (1)
  • 0.078 in (1)
  • 0.097 in (1)
  • 0.124 in (1)
  • 0.155 in (1)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 32.0 mm (1)
  • 50.0 mm (1)
  • 63.0 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
Front End Size Min to Front End Size Max
insertGeometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (18)
  • L-RECTANGLE 90 (7)
  • L-RECTANGLE ON EDGE 90 (17)
  • O-OCTOGON 135 (1)
  • R-ROUND (38)
  • S-SQUARE 90 (33)
  • T-TRIANGLE 60 (23)
Insert IC Size
Insert IC Size
  • 9.525 mm (11)
  • 12.0 mm (3)
  • 12.701 mm (18)
  • 15.826 mm (2)
  • 15.875 mm (14)
  • 16.0 mm (4)
  • 19.05 mm (20)
  • 20.0 mm (6)
  • 25.0 mm (11)
  • 25.401 mm (16)
  • 32.0 mm (8)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (11)
  • 0.473 in (3)
  • 0.5 in (18)
  • 0.623 in (2)
  • 0.625 in (14)
  • 0.63 in (4)
  • 0.75 in (20)
  • 0.787 in (6)
  • 0.984 in (11)
  • 1.0 in (16)
  • 1.26 in (8)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.575 mm (1)
  • 9.525 mm (1)
  • 12.701 mm (6)
  • 12.9 mm (4)
  • 13.65 mm (2)
  • 13.726 mm (2)
  • 15.875 mm (5)
  • 16.125 mm (3)
  • 16.5 mm (10)
  • 19.0 mm (9)
  • 19.05 mm (12)
  • 19.35 mm (7)
  • 22.0 mm (8)
  • 22.901 mm (2)
  • 25.401 mm (10)
  • 25.8 mm (4)
  • 27.5 mm (5)
  • 30.0 mm (4)
  • 31.75 mm (4)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.01 in (1)
  • 0.015 in (1)
  • 0.02 in (10)
  • 0.022 in (4)
  • 0.025 in (8)
  • 0.027 in (10)
  • 0.03 in (28)
  • 0.034 in (8)
  • 0.035 in (2)
  • 0.039 in (10)
  • 0.04 in (4)
  • 0.042 in (5)
  • 0.046 in (4)
  • 0.049 in (4)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 0 (6)
  • RH (12)
  • RM (35)
  • RN (16)
  • RP (14)
  • RRF (4)
  • RRH (5)
  • RRP (8)
  • RRSM (3)
  • RU (2)
  • S-WT5 (2)
  • UP (6)
  • UPG (18)
Cutting Tool Material
Cutting Tool Material
  • C A (22)
  • C N (10)
  • H T (12)
  • H W (175)
Tolerance Class
Tolerance Class
  • G (1)
  • M (108)
  • U (20)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (28)
  • TAPER SHANK (2)
System Size
System Size
  • KM80TS (2)
Back-End Diameter
Back-End Diameter
  • 80.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 3.15 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Plaquettes de tournage ISO

Plaquettes Kenloc™
(13 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
3751687 TNMG160408RP TNMG332RP KCP25   9.5250 .3750 16.5000 .6500 4.7630 .1875 0.7940 .0312 3.8100 .1500
    List price:
    $15.72 /each.
    Your price::
    3753898 TNMG160408RP TNMG332RP KCK20 9.5250 .3750 16.5000 .6500 4.7630 .1875 0.7940 .0312 3.8100 .1500  
      List price:
      $15.72 /each.
      Your price::
      3749284 TNMG160408RP TNMG332RP KCP10 9.5250 .3750 16.5000 .6500 4.7630 .1875 0.7940 .0312 3.8100 .1500  
        List price:
        $15.72 /each.
        Your price::
        3751688 TNMG160412RP TNMG333RP KCP25 9.5250 .3750 16.5000 .6496 4.7600 .1875 1.2000 .0468 3.8100 .1500  
          List price:
          $15.72 /each.
          Your price::
          3751689 TNMG220408RP TNMG432RP KCP25 12.7000 .5000 22.0000 .8660 4.7600 .1875 0.7940 .0312 5.1600 .2030  
            List price:
            $20.76 /each.
            Your price::
            3751692 TNMG270612RP TNMG543RP KCP25 15.8750 .6250 27.5000 1.083 6.3500 .2500 1.1910 .0468 6.3500 .2500  
              List price:
              $37.38 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Unités de serrage manuelles KM™

              Tour
              (5 Products)
              • Arrosage — interneArrosage — interne
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [CSWS] System Size Workpiece Side [D1] Adapter / Shank / Bore Diameter [D1] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [B2] Overall Width [B2] Overall Width [L1] Gage Length [L1] Gage Length [LS] Shank Length [LS] Shank Length Actuation Screw ID Drive Size Torque Catalog Newton Meters Weight Kilograms
              2420366 KM100NCMEF KM100NCMEF KM100 100.0000 3.937 100.0 3.937 167.0000 6.575 112.0000 4.409 56.0000 2.205 32.0 1.259 17 mm 100-120 7.95
                List price:
                $4,116.65 /each.
                Your price::
                1021576 KM32NCMEF KM32NCMEF KM32 32.0000 1.259 32.0 1.259 54.0000 2.126 36.0000 1.417 20.0000 .7874 12.0 .4724 5 mm 8-11 0.24
                  List price:
                  $816.28 /each.
                  Your price::
                  1021749 KM50NCMEF KM50NCMEF KM50 50.0000 1.968 50.0 1.968 84.0000 3.307 55.0000 2.165 30.0000 1.181 20.0 .7874 10 mm 27-34 0.88
                    List price:
                    $962.38 /each.
                    Your price::
                    1021753 KM63NCMEF KM63NCMEF KM63 63.0000 2.480 63.0 2.480 102.0000 4.016 72.0000 2.835 40.0000 1.575 20.0 .7874 12 mm 47-54 1.79
                      List price:
                      $962.38 /each.
                      Your price::
                      1144799 KM80NCMEF KM80NCMEF KM80 80.0000 3.149 80.0 3.149 132.0000 5.196 90.0000 3.543 50.0000 1.968 25.0 .9843 14 mm 79-85 3.79
                        List price:
                        $1,334.95 /each.
                        Your price::
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor

                        ORIGINAL PRODUCT

                        Géométries Beyond™ RU et UP

                        Serrage par levier
                        (2 Products)
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness
                        5696593 RCMX2507M0TUP RCMX2507M0TUP KCP10B 25.0000 .9840 7.1900 .2830 7.9380 .3125
                          List price:
                          $48.38 /each.
                          Your price::
                          4033280 RCMX3209M0TUP RCMX3209M0TUP KCP25 32.0000 1.260 9.7800 .3850 9.5210 .3750
                            List price:
                            $86.34 /each.
                            Your price::
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor

                            ORIGINAL PRODUCT

                            Reprofilage de roues et d'essieux montés

                            Plaquettes
                            (2 Products)
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [D1] Insert Hole Size [D1] Insert Hole Size
                            3386186 WTS10P WTS10P KC5125RR 15.8240 .6230 9.5250 .3750 4.4320  
                              List price:
                              $25.44 /each.
                              Your price::
                              1157405 WTS10P WTS10P K40 15.8240 .6230 9.5250 .3750    
                                List price:
                                $22.59 /each.
                                Your price::
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor

                                ORIGINAL PRODUCT

                                Outils pour roues et essieux

                                Plaquettes
                                (1 Products)
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
                                1157412 OPGN060316 OPG524 K68 15.8750 .6250 6.5790 .2590 3.1750 .1250 1.6000 .0625
                                  List price:
                                  $36.91 /each.
                                  Your price::
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor

                                  ORIGINAL PRODUCT

                                  Reprofilage de roues et d'essieux montés

                                  Outils • Tours à essieux montés
                                  (1 Products)
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert
                                  1015684 NUWTC NUWTC 76.2000 3.000 57.1500 2.250 57.1500 2.250 412.7500 16.250 95.2500 3.750 KRR6586__
                                    List price:
                                    $2,091.81 /each.
                                    Your price::
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor

                                    ORIGINAL PRODUCT

                                    Porte-outils KENLOC

                                    Plaquettes KENLOC
                                    (4 Products)
                                    • TurningTurning
                                    • ProfilingProfiling
                                    • FacingFacing
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                                    1096104 MCLNL246E MCLNL246E 38.1000 1.500 38.1000 1.500 50.8000 2.000 177.8000 7.000 37.8000 1.490 CN..643 9/64 5/32
                                      List price:
                                      $144.86 /each.
                                      Your price::
                                      1808147 MCLNL326F MCLNL326F 50.8000 2.000 50.8000 2.000 63.5000 2.500 203.2000 8.000 37.8460 1.490 CN..643 9/64 5/32
                                        List price:
                                        $218.71 /each.
                                        Your price::
                                        1096082 MCLNR246E MCLNR246E 38.1000 1.500 38.1000 1.500 50.8000 2.000 177.8000 7.000 37.8000 1.490 CN..643 9/64 5/32
                                          List price:
                                          $144.86 /each.
                                          Your price::
                                          1808153 MCLNR326F MCLNR326F 50.8000 2.000 50.8000 2.000 63.5000 2.500 203.2000 8.000 37.8460 1.490 CN..643 9/64 5/32
                                            List price:
                                            $218.71 /each.
                                            Your price::
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor

                                            ORIGINAL PRODUCT

                                            Beyond™ RU & UPG Geometries

                                            Pin Clamping
                                            (8 Products)
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness
                                            6320355 RCMT1606M0UPG RCMT1606M0UPG KCP10B 16.0000 .6300 5.5000 .2170 6.3500 .2500
                                              List price:
                                              $30.37 /each.
                                              Your price::
                                              6320356 RCMT1606M0UPG RCMT1606M0UPG KCP25B 16.0000 .6300 5.5000 .2170 6.3500 .2500
                                                List price:
                                                $30.37 /each.
                                                Your price::
                                                6320357 RCMT1606M0UPG RCMT1606M0UPG KCK15B 16.0000 .6300 5.5000 .2170 6.3500 .2500
                                                  List price:
                                                  $30.37 /each.
                                                  Your price::
                                                  6320354 RCMT1606M0UPG RCMT1606M0UPG KCPK05 16.0000 .6300 5.5000 .2170 6.3500 .2500
                                                    List price:
                                                    $30.37 /each.
                                                    Your price::
                                                    6320361 RCMT2006M0UPG RCMT2006M0UPG KCK15B 20.0000 .7870 6.5000 .2560 6.3500 .2500
                                                      List price:
                                                      $34.48 /each.
                                                      Your price::
                                                      6320360 RCMT2006M0UPG RCMT2006M0UPG KCP25B 20.0000 .7870 6.5000 .2560 6.3500 .2500
                                                        List price:
                                                        $34.48 /each.
                                                        Your price::
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor

                                                        ORIGINAL PRODUCT

                                                        Reprofilage de roues et d'essieux montés

                                                        Plaquettes
                                                        (5 Products)
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size B Gamma [BGAMMA] B Gamma [BGAMMA]
                                                        2487879 KRR658652 KRR658652 KC9125RR 19.0500 .7500 31.7500 1.250 12.7000 .5000 4.7630 .1875 7.8740 .3100 0.5080 .0200
                                                          List price:
                                                          $65.54 /each.
                                                          Your price::
                                                          2487881 KRR658652 KRR658652 KC9115RR 19.0500 .7500 31.7500 1.250 12.7000 .5000 4.7630 .1875 7.8740 .3100 0.5080 .0200
                                                            List price:
                                                            $48.99 /each.
                                                            Your price::