Axial-Einstechdrehen
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (3409)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(3409)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(3409)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3409)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3409)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3409)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3409)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3409)
- M Rostfreier Stahl (3389)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(3389)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3389)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3389)
- K Gusseisen (3051)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3051)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3042)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3030)
- N Buntmetalle (3055)
- N1Geschmiedetes Aluminium (3047)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(2863)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(156)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (3055)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (2871)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (2863)
- N7MMCs (69)
- S Hochwarmfeste Legierungen (3406)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3406)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3406)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3406)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3393)
- H Gehärtete Werkstoffe (1646)
- H1Gehärtete Werkstoffe 44-48 HRC(1646)
- H2Gehärtete Werkstoffe 48-55 HRC(1115)
- H3Gehärtete Werkstoffe 56-60 HRC(221)
- H4Gehärtete Werkstoffe >60 HRC(221)
Erste Wahl auswählen
- BR (46)
- CN (229)
- DE (227)
- GB (149)
- IN (126)
- SG (155)
- US (230)
Anwendungen
Anwendungen
Back Boring (1118)
Boring (2581)
Cut-Off (652)
Deep Grooving (34)
Drilling (1)
Face Grooving (3964)
Facing (1122)
Grooving (3750)
ID Facing (1133)
ID Grooving (3061)
ID Thread Turning (69)
Multiple Direction Cutting (239)
OD Thread Turning (128)
Plunge Turning (2290)
Profiling (1151)
Turning (2241)
Schnittlänge
Schnittlänge
- 26.0 mm(1)
- 32.0 mm(3)
bis
Gewindeart
Gewindeart
- 60 (188)
- ACME (123)
- API (115)
- API RD (82)
- BSW (79)
- BUTTRESS (183)
- M (41)
- NPT (79)
- STUB ACME (79)
- UN (183)
- UNJ (79)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (2958)
- Lightly Interrupted Cut (3445)
- Smooth Cut (3904)
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 45.0 (13)
- 90.0 (791)
bis
Anschlussart
Anschlussart
- Bolt-On Head (6)
- Boring Bar Shank (90)
- Toolholder (365)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 1.0 (1404)
- 2.0 (2788)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 41.275 mm(6)
- 47.75 mm(36)
- 51.75 mm(32)
- 52.746 mm(11)
- 52.75 mm(20)
- 53.62 mm(32)
- 54.75 mm(43)
- 55.0 mm(1)
- 55.67 mm(1)
- 55.75 mm(50)
- 57.6129 mm(2)
- 57.6229 mm(19)
- 59.75 mm(14)
- 61.746 mm(6)
- 61.75 mm(18)
- 63.5 mm(4)
- 65.62 mm(1)
- 67.746 mm(7)
- 67.75 mm(11)
- 70.0 mm(2)
- 80.0 mm(2)
- 88.9 mm(4)
- 100.0 mm(4)
- 101.6 mm(3)
- 114.3 mm(36)
- 125.0 mm(34)
- 125.3 mm(7)
- 127.0 mm(18)
- 138.75 mm(4)
- 139.9 mm(11)
- 139.903 mm(1)
- 150.0 mm(121)
- 150.25 mm(4)
- 150.3 mm(1)
- 151.4 mm(10)
- 152.4 mm(166)
- 158.75 mm(4)
- 170.0 mm(32)
- 170.25 mm(4)
- 177.8 mm(8)
- 179.8 mm(2)
- 200.0 mm(12)
- 201.45 mm(7)
- 202.591 mm(1)
- 203.2 mm(5)
- 203.5 mm(4)
- 250.0 mm(6)
- 250.927 mm(1)
- 254.0 mm(8)
- 300.0 mm(8)
- 304.8 mm(8)
- 350.0 mm(1)
- 355.6 mm(10)
- 406.4 mm(10)
bis
Eckenradius
Eckenradius
- 0.0 mm(132)
- 0.025 mm(42)
- 0.05 mm(41)
- 0.075 mm(198)
- 0.1 mm(361)
- 0.125 mm(79)
- 0.15 mm(126)
- 0.175 mm(204)
- 0.2 mm(1781)
- 0.225 mm(79)
- 0.25 mm(155)
- 0.275 mm(41)
- 0.3 mm(290)
- 0.325 mm(233)
- 0.35 mm(165)
- 0.4 mm(993)
- 0.45 mm(96)
- 0.475 mm(41)
- 0.5 mm(164)
- 0.575 mm(380)
- 0.75 mm(39)
- 0.775 mm(228)
- 0.8 mm(686)
- 0.825 mm(9)
- 0.9 mm(115)
- 1.0 mm(212)
- 1.05 mm(15)
- 1.075 mm(26)
- 1.175 mm(12)
- 1.2 mm(343)
- 1.225 mm(10)
- 1.25 mm(38)
- 1.5 mm(351)
- 1.55 mm(173)
- 1.575 mm(242)
- 1.6 mm(458)
- 1.65 mm(143)
- 1.75 mm(38)
- 1.975 mm(98)
- 2.0 mm(228)
- 2.05 mm(30)
- 2.075 mm(120)
- 2.375 mm(145)
- 2.4 mm(173)
- 2.45 mm(119)
- 2.5 mm(180)
- 2.525 mm(17)
- 2.55 mm(123)
- 2.575 mm(161)
- 3.0 mm(122)
- 3.025 mm(16)
- 3.05 mm(90)
- 3.075 mm(125)
- 3.175 mm(205)
- 3.25 mm(97)
- 3.95 mm(19)
- 3.975 mm(8)
- 4.0 mm(27)
- 4.025 mm(24)
- 4.075 mm(36)
- 4.775 mm(6)
- 5.0 mm(8)
- 5.025 mm(5)
- 5.075 mm(10)
bis
Eckenfasen
Eckenfasen
- 0.0 mm(3810)
bis
application
Minimale Schnitttiefe
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- K313 (823)
- K420 (207)
- K68 (304)
- KB1630 (215)
- KBH20 (127)
- KC5010 (538)
- KC5025 (571)
- KC5410 (113)
- KC720 (214)
- KC730 (410)
- KC850 (329)
- KC9110 (19)
- KCK20 (249)
- KCK20B (703)
- KCM35B (365)
- KCP10 (143)
- KCP10B (763)
- KCP25 (144)
- KCP25B (819)
- KCP25C (755)
- KCS10B (365)
- KCU10 (1197)
- KCU10B (1229)
- KCU25 (1323)
- KCU25B (1355)
- KD1405 (69)
- KD1425 (87)
- KMS (29)
- KT315 (234)
- KY3500 (98)
- KYS30 (41)
Schneidrichtung
Schneidrichtung
- L (208)
- N (10)
- R (243)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (4002)
F Abmessung
F Abmessung
- 6.553 mm(2)
- 7.0 mm(2)
- 8.17 mm(1)
- 8.23 mm(2)
- 9.52 mm(2)
- 9.76 mm(1)
- 10.0 mm(1)
- 10.23 mm(1)
- 10.24 mm(1)
- 10.312 mm(1)
- 10.785 mm(1)
- 10.973 mm(2)
- 11.0 mm(4)
- 11.1 mm(2)
- 12.0 mm(1)
- 12.573 mm(2)
- 12.7 mm(6)
- 12.73 mm(3)
- 12.75 mm(4)
- 12.95 mm(4)
- 13.0 mm(2)
- 13.03 mm(2)
- 14.0 mm(2)
- 14.148 mm(2)
- 14.27 mm(1)
- 14.275 mm(3)
- 15.875 mm(2)
- 15.88 mm(2)
- 16.0 mm(4)
- 16.125 mm(2)
- 16.25 mm(2)
- 16.256 mm(2)
- 17.0 mm(4)
- 17.348 mm(2)
- 17.475 mm(2)
- 17.48 mm(2)
- 19.05 mm(2)
- 19.2 mm(5)
- 19.203 mm(1)
- 19.205 mm(1)
- 19.207 mm(1)
- 19.21 mm(11)
- 19.2106 mm(1)
- 19.253 mm(2)
- 19.3 mm(2)
- 19.431 mm(1)
- 20.0 mm(2)
- 20.178 mm(2)
- 20.179 mm(1)
- 20.18 mm(5)
- 20.181 mm(7)
- 20.182 mm(3)
- 20.183 mm(2)
- 20.19 mm(7)
- 20.25 mm(2)
- 22.0 mm(2)
- 22.225 mm(3)
- 22.61 mm(2)
- 25.0 mm(6)
- 25.18 mm(26)
- 25.182 mm(2)
- 25.183 mm(3)
- 25.184 mm(5)
- 25.185 mm(12)
- 25.19 mm(18)
- 25.2 mm(2)
- 25.204 mm(2)
- 25.206 mm(1)
- 25.21 mm(18)
- 25.2106 mm(1)
- 25.4 mm(12)
- 25.54 mm(1)
- 25.55 mm(8)
- 25.557 mm(1)
- 25.558 mm(2)
- 25.559 mm(5)
- 25.56 mm(52)
- 25.578 mm(2)
- 25.58 mm(19)
- 25.581 mm(2)
- 25.585 mm(1)
- 27.0 mm(4)
- 27.9 mm(1)
- 28.575 mm(1)
- 30.4 mm(1)
- 30.8 mm(1)
- 31.75 mm(23)
- 31.91 mm(8)
- 31.93 mm(4)
- 31.933 mm(1)
- 31.934 mm(1)
- 31.935 mm(2)
- 32.0 mm(12)
- 32.15 mm(4)
- 32.16 mm(4)
- 32.18 mm(8)
- 32.537 mm(2)
- 33.1 mm(1)
- 34.925 mm(4)
- 35.0 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.1 mm(16)
- 38.9 mm(1)
- 39.1 mm(2)
- 40.0 mm(4)
- 41.275 mm(4)
- 50.8 mm(4)
bis
Minimaler Bohrungsdurchmesser
Minimaler Bohrungsdurchmesser
- 11.176 mm(1)
- 11.18 mm(1)
- 11.5 mm(2)
- 17.0 mm(3)
- 18.5 mm(2)
- 18.542 mm(4)
- 20.32 mm(1)
- 21.0 mm(3)
- 22.0 mm(3)
- 25.4 mm(4)
- 26.0 mm(11)
- 28.575 mm(3)
- 28.58 mm(1)
- 30.0 mm(4)
- 33.0 mm(4)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 41.0 mm(4)
- 44.0 mm(2)
- 44.45 mm(2)
- 50.8 mm(2)
- 54.0 mm(4)
- 57.15 mm(6)
- 60.325 mm(2)
- 63.5 mm(4)
- 69.85 mm(4)
- 70.0 mm(1)
- 76.2 mm(4)
- 82.55 mm(4)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(152)
- 11.176 mm(1)
- 11.18 mm(1)
- 11.5 mm(2)
- 16.0 mm(4)
- 17.0 mm(3)
- 18.5 mm(2)
- 18.542 mm(4)
- 19.99 mm(1)
- 20.0 mm(5)
- 20.32 mm(1)
- 21.0 mm(3)
- 22.0 mm(3)
- 24.994 mm(1)
- 25.0 mm(9)
- 25.4 mm(4)
- 26.0 mm(11)
- 28.0 mm(1)
- 28.575 mm(3)
- 28.58 mm(1)
- 30.0 mm(8)
- 33.0 mm(4)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 35.0 mm(8)
- 36.0 mm(5)
- 37.998 mm(1)
- 38.1 mm(4)
- 40.0 mm(17)
- 41.0 mm(4)
- 41.3 mm(58)
- 42.0 mm(5)
- 44.0 mm(2)
- 44.45 mm(2)
- 47.6 mm(57)
- 48.0 mm(3)
- 50.0 mm(34)
- 50.8 mm(2)
- 52.0 mm(3)
- 54.0 mm(4)
- 55.88 mm(3)
- 56.625 mm(49)
- 57.15 mm(6)
- 57.2 mm(29)
- 58.0 mm(4)
- 60.0 mm(56)
- 60.325 mm(4)
- 63.5 mm(22)
- 64.0 mm(4)
- 68.0 mm(4)
- 69.85 mm(4)
- 70.0 mm(8)
- 75.0 mm(59)
- 76.2 mm(8)
- 80.0 mm(11)
- 82.55 mm(4)
- 88.9 mm(565)
- 90.0 mm(8)
- 92.0 mm(3)
- 100.0 mm(73)
- 120.0 mm(13)
- 127.0 mm(1)
- 130.0 mm(4)
- 132.0 mm(4)
- 139.7 mm(785)
- 146.05 mm(3)
- 174.6 mm(141)
- 180.0 mm(72)
- 184.0 mm(3)
- 200.0 mm(8)
- 209.6 mm(256)
- 222.3 mm(66)
- 250.0 mm(72)
- 290.0 mm(8)
- 333.0 mm(4)
- 350.0 mm(66)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- 20.0 mm(4)
- 21.0 mm(3)
- 23.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(5)
- 26.0 mm(2)
- 30.0 mm(4)
- 35.0 mm(10)
- 35.992 mm(1)
- 36.0 mm(12)
- 38.0 mm(1)
- 40.0 mm(8)
- 42.0 mm(4)
- 46.0 mm(1)
- 48.0 mm(4)
- 50.0 mm(21)
- 54.0 mm(2)
- 58.0 mm(3)
- 58.001 mm(1)
- 60.0 mm(31)
- 64.0 mm(3)
- 72.0 mm(3)
- 74.0 mm(3)
- 75.0 mm(50)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(67)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 180.0 mm(73)
- 200.0 mm(2)
- 212.0 mm(4)
- 250.0 mm(68)
- 254.0 mm(4)
- 300.0 mm(12)
- 350.0 mm(66)
- 999.0 mm(81)
- 9999.0 mm(1957)
bis
Senkwinkel
Senkwinkel
- 20.0 (6)
- 45.0 (12)
bis
Schneidrichtung
Schneidrichtung
- E (379)
- S (82)
Spanwinkelausführung
Spanwinkelausführung
- NEGATIVE-ZERO (236)
- NEUTRAL (ZERO) (170)
Bohrungstiefe min.
Bohrungstiefe min.
- 25.4 mm(10)
- 31.26 mm(1)
- 31.3 mm(1)
- 32.8 mm(1)
- 38.1 mm(1)
- 48.0 mm(2)
- 50.8 mm(25)
- 63.48 mm(1)
- 63.5 mm(3)
- 64.0 mm(4)
- 76.2 mm(5)
- 80.0 mm(4)
- 95.25 mm(2)
- 96.0 mm(1)
- 100.0 mm(11)
- 101.6 mm(12)
- 114.3 mm(2)
- 127.0 mm(5)
- 128.0 mm(4)
- 152.4 mm(8)
- 160.0 mm(6)
- 177.8 mm(3)
- 200.0 mm(1)
- 203.2 mm(8)
- 228.6 mm(1)
- 254.0 mm(7)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- C (9)
- S (87)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- CARTRIDGE MOUNT (78)
- SQUARE SHANK ADAPTER (20)
Spannsystem
Spannsystem
- N (198)
- Y (441)
Schnittbreite
Schnittbreite
- 0.5 mm(80)
- 0.787 mm(127)
- 0.8 mm(84)
- 0.889 mm(37)
- 0.991 mm(70)
- 1.0 mm(187)
- 1.041 mm(87)
- 1.19 mm(125)
- 1.194 mm(216)
- 1.2 mm(179)
- 1.39 mm(72)
- 1.397 mm(37)
- 1.4 mm(86)
- 1.473 mm(77)
- 1.49 mm(2)
- 1.5 mm(190)
- 1.57 mm(156)
- 1.575 mm(321)
- 1.6 mm(12)
- 1.69 mm(36)
- 1.7 mm(86)
- 1.702 mm(70)
- 1.75 mm(165)
- 1.829 mm(108)
- 1.94 mm(34)
- 1.95 mm(83)
- 1.956 mm(33)
- 1.981 mm(111)
- 1.99 mm(24)
- 2.0 mm(298)
- 2.007 mm(70)
- 2.12 mm(15)
- 2.125 mm(43)
- 2.13 mm(63)
- 2.2 mm(163)
- 2.235 mm(142)
- 2.236 mm(50)
- 2.24 mm(72)
- 2.25 mm(127)
- 2.38 mm(2)
- 2.387 mm(57)
- 2.388 mm(331)
- 2.39 mm(49)
- 2.464 mm(92)
- 2.49 mm(2)
- 2.5 mm(194)
- 2.51 mm(10)
- 2.511 mm(10)
- 2.62 mm(5)
- 2.667 mm(96)
- 2.74 mm(32)
- 2.743 mm(37)
- 2.75 mm(178)
- 2.794 mm(88)
- 2.997 mm(119)
- 3.0 mm(494)
- 3.05 mm(31)
- 3.099 mm(84)
- 3.1 mm(43)
- 3.11 mm(40)
- 3.12 mm(78)
- 3.125 mm(170)
- 3.13 mm(63)
- 3.17 mm(97)
- 3.175 mm(689)
- 3.177 mm(133)
- 3.18 mm(95)
- 3.2 mm(142)
- 3.245 mm(77)
- 3.25 mm(89)
- 3.251 mm(42)
- 3.27 mm(32)
- 3.3 mm(137)
- 3.301 mm(144)
- 3.302 mm(152)
- 3.32 mm(43)
- 3.5 mm(169)
- 3.607 mm(92)
- 3.81 mm(44)
- 3.82 mm(43)
- 3.835 mm(37)
- 3.84 mm(74)
- 3.96 mm(96)
- 3.962 mm(125)
- 3.974 mm(42)
- 3.988 mm(81)
- 4.0 mm(357)
- 4.094 mm(132)
- 4.1 mm(40)
- 4.11 mm(24)
- 4.12 mm(75)
- 4.125 mm(146)
- 4.242 mm(37)
- 4.25 mm(92)
- 4.5 mm(128)
- 4.521 mm(83)
- 4.699 mm(86)
- 4.75 mm(125)
- 4.76 mm(142)
- 4.762 mm(142)
- 4.763 mm(112)
- 4.775 mm(160)
- 4.78 mm(21)
- 4.785 mm(23)
- 4.788 mm(26)
- 4.8 mm(95)
- 4.801 mm(238)
- 4.873 mm(108)
- 4.877 mm(136)
- 4.878 mm(114)
- 4.88 mm(47)
- 4.95 mm(90)
- 4.953 mm(45)
- 4.978 mm(85)
- 5.0 mm(253)
- 5.004 mm(19)
- 5.1 mm(29)
- 5.12 mm(42)
- 5.125 mm(188)
- 5.13 mm(36)
- 5.41 mm(40)
- 5.5 mm(40)
- 6.0 mm(199)
- 6.12 mm(34)
- 6.125 mm(150)
- 6.13 mm(49)
- 6.346 mm(90)
- 6.35 mm(312)
- 6.36 mm(24)
- 6.477 mm(104)
- 6.478 mm(100)
- 6.502 mm(42)
- 7.0 mm(94)
- 7.125 mm(95)
- 7.137 mm(2)
- 7.317 mm(89)
- 7.92 mm(15)
- 7.925 mm(25)
- 7.937 mm(10)
- 7.938 mm(8)
- 7.94 mm(8)
- 8.0 mm(53)
- 8.051 mm(13)
- 8.052 mm(23)
- 8.125 mm(60)
- 8.13 mm(36)
- 9.525 mm(24)
- 9.53 mm(6)
- 9.677 mm(5)
- 9.754 mm(9)
- 10.0 mm(21)
- 10.125 mm(22)
- 10.13 mm(26)
bis
Stirnseitentyp
Stirnseitentyp
- MCS - Modular Cartridge System (78)
- VKT - Square Shank (20)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- PRISMATIC (1986)
- TN-TOP NOTCH (2250)
Kurzklemmhalter-Größe
Kurzklemmhalter-Größe
- 50 (331)
- 65 (122)
Stirnseitenausführung
Stirnseitenausführung
- MCS01 Modular Deep Grooving (78)
- VKT01 Std Design (20)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 1 (5)
- 2 (45)
- 2S (11)
- 3 (123)
- 3S (8)
- 4 (71)
- 4S (1)
- 5 (73)
- 5S (2)
- 6 (69)
- 8 (1)
Maximale Stechtiefe
Maximale Stechtiefe
- 1.016 mm(1)
- 1.6 mm(2)
- 1.69 mm(1)
- 1.78 mm(2)
- 1.9 mm(1)
- 3.3 mm(1)
- 3.505 mm(21)
- 3.51 mm(19)
- 5.0 mm(3)
- 5.33 mm(16)
- 5.334 mm(23)
- 6.35 mm(2)
- 7.0 mm(2)
- 7.46 mm(8)
- 7.468 mm(9)
- 7.47 mm(6)
- 7.62 mm(1)
- 8.484 mm(4)
- 9.0 mm(1)
- 10.54 mm(1)
- 10.541 mm(1)
- 10.543 mm(1)
- 11.0 mm(4)
- 12.0 mm(129)
- 13.995 mm(2)
- 14.0 mm(56)
- 16.0 mm(113)
- 18.999 mm(1)
- 19.0 mm(16)
- 20.0 mm(106)
- 24.0 mm(21)
- 26.0 mm(100)
- 31.996 mm(2)
- 32.0 mm(49)
bis
Messlänge
Messlänge
- 22.0000 mm(12)
- 28.0000 mm(2)
- 33.0000 mm(2)
- 38.0000 mm(2)
- 43.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(6)
- 49.0000 mm(4)
- 53.5000 mm(4)
- 55.5000 mm(2)
- 57.0000 mm(6)
- 58.0000 mm(5)
- 58.5000 mm(7)
- 60.5000 mm(2)
- 63.5000 mm(14)
- 65.5000 mm(2)
- 66.5000 mm(4)
- 68.5000 mm(4)
- 73.5000 mm(4)
- 138.1500 mm(3)
- 138.7500 mm(4)
- 139.2500 mm(4)
- 139.9000 mm(11)
- 139.9030 mm(1)
- 140.4000 mm(10)
- 140.5500 mm(7)
- 150.0000 mm(4)
- 152.4000 mm(8)
- 158.1500 mm(2)
- 158.7500 mm(4)
- 159.2500 mm(4)
- 165.9500 mm(2)
- 170.0000 mm(3)
- 177.8000 mm(4)
Maximale Stechtiefe der Wendeschneidplatte
Maximale Stechtiefe der Wendeschneidplatte
- 0.64 mm(12)
- 0.76 mm(19)
- 0.762 mm(138)
- 1.0 mm(8)
- 1.015 mm(8)
- 1.016 mm(266)
- 1.02 mm(8)
- 1.063 mm(6)
- 1.09 mm(47)
- 1.092 mm(163)
- 1.335 mm(15)
- 1.5 mm(13)
- 1.56 mm(12)
- 1.588 mm(6)
- 1.59 mm(4)
- 1.9 mm(13)
- 1.905 mm(1)
- 1.97 mm(6)
- 1.981 mm(6)
- 2.0 mm(49)
- 2.06 mm(10)
- 2.38 mm(8)
- 2.5 mm(13)
- 2.54 mm(11)
- 2.563 mm(11)
- 2.75 mm(7)
- 2.777 mm(3)
- 2.9 mm(18)
- 2.92 mm(53)
- 2.921 mm(121)
- 3.0 mm(32)
- 3.063 mm(9)
- 3.175 mm(11)
- 3.3 mm(12)
- 3.4 mm(56)
- 3.41 mm(12)
- 3.5 mm(40)
- 3.51 mm(5)
- 3.52 mm(6)
- 3.6 mm(6)
- 3.81 mm(70)
- 3.84 mm(6)
- 3.86 mm(4)
- 3.969 mm(2)
- 4.0 mm(8)
- 4.063 mm(9)
- 4.1 mm(12)
- 4.15 mm(1)
- 4.2 mm(54)
- 4.4 mm(10)
- 4.5 mm(18)
- 4.6 mm(1)
- 4.74 mm(10)
- 4.763 mm(2)
- 4.9 mm(47)
- 5.0 mm(4)
- 5.063 mm(6)
- 5.9 mm(12)
- 6.0 mm(22)
- 6.1 mm(6)
- 6.24 mm(4)
- 6.35 mm(1)
- 6.4 mm(20)
- 7.94 mm(5)
- 8.1 mm(13)
- 8.2 mm(1)
bis
Minimaler Einstechdurchmesser
Minimaler Einstechdurchmesser
- 26.0 mm(4)
- 28.0 mm(1)
- 30.0 mm(8)
- 33.0 mm(4)
- 35.0 mm(4)
- 40.0 mm(8)
- 41.0 mm(4)
- 50.0 mm(16)
- 60.0 mm(32)
- 70.0 mm(3)
- 75.0 mm(32)
- 90.0 mm(2)
- 100.0 mm(40)
- 120.0 mm(5)
- 180.0 mm(40)
- 250.0 mm(38)
- 350.0 mm(39)
bis
Maximaler Einstechdurchmesser
Maximaler Einstechdurchmesser
- 30.0 mm(4)
- 35.0 mm(8)
- 38.0 mm(1)
- 40.0 mm(4)
- 42.0 mm(4)
- 50.0 mm(12)
- 60.0 mm(18)
- 75.0 mm(30)
- 100.0 mm(32)
- 180.0 mm(40)
- 250.0 mm(40)
- 350.0 mm(38)
- 999.0 mm(39)
bis
insertGeometry
Form
Form
- PRISMATIC (1381)
- TN-TOP NOTCH (2051)
Plattensitzgröße
Plattensitzgröße
- 1 (27)
- 10 (74)
- 1F (12)
- 2 (747)
- 2B (18)
- 2S (14)
- 3 (1360)
- 3S (24)
- 4 (632)
- 4S (14)
- 5 (152)
- 5S (16)
- 6 (251)
- 8 (163)
Schneidstoff
Schneidstoff
- B H (215)
- B L (589)
- C N (102)
- D P (156)
- H T (234)
- H W (4166)
backEnd
Aufnahmeart
Aufnahmeart
- BORING BAR (90)
- BORING BAR HEAD (6)
- SQUARE SHANK (365)
Systemgröße
Systemgröße
- KM40TS (4)
- KM4X63 (4)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (11)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (7)
- VDI30 (10)
- VDI40 (10)
Hinterer Durchmesser
Hinterer Durchmesser
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(3)
- 12.7 mm(5)
- 15.87 mm(1)
- 15.875 mm(5)
- 16.0 mm(5)
- 19.05 mm(5)
- 20.0 mm(4)
- 25.0 mm(11)
- 25.4 mm(14)
- 30.0 mm(10)
- 31.75 mm(5)
- 32.0 mm(4)
- 38.1 mm(6)
- 40.0 mm(24)
- 44.45 mm(3)
- 50.0 mm(17)
- 50.8 mm(8)
- 57.15 mm(1)
- 63.0 mm(31)
- 63.5 mm(7)
- 80.0 mm(23)
bis
Schafthöhe
Schafthöhe
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(6)
- 15.41 mm(1)
- 15.875 mm(3)
- 15.88 mm(2)
- 16.0 mm(4)
- 19.05 mm(32)
- 20.0 mm(36)
- 23.82 mm(1)
- 25.0 mm(117)
- 25.4 mm(130)
- 30.82 mm(2)
- 31.75 mm(43)
- 32.0 mm(37)
- 38.1 mm(16)
- 38.82 mm(4)
- 46.96 mm(1)
bis
Schaftbreite
Schaftbreite
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(6)
- 15.875 mm(3)
- 15.88 mm(2)
- 16.0 mm(4)
- 19.05 mm(32)
- 20.0 mm(36)
- 21.96 mm(1)
- 25.0 mm(120)
- 25.01 mm(1)
- 25.4 mm(130)
- 28.96 mm(2)
- 31.75 mm(43)
- 32.0 mm(33)
- 36.96 mm(4)
- 38.1 mm(16)
- 46.96 mm(1)
bis
No filters matching ""
