Specialty Turning • Tangentially Mounted Inserts • Fix-Perfect™
The Kennametal Fix Perfect line of specialty turning tools allows you to realize consistent and accurate cuts regardless of cutting edge length, insert thickness, or corning radius. When you use innovative tangentially mounted inserts from Kennametal, you end up with quality results on every cutting application. Fix-Perfect specialty inserts are available for all workpiece materials across multiple applications. By opting for Fix-Perfect tools, you’ll reduce your downtime by minimizing wear and tear.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (185)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(185)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(185)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(185)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(185)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(185)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(185)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(185)
- M Stainless Steel (111)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(111)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(111)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(111)
- K Cast Iron (100)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(100)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(100)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(100)
- N Non-Ferrous Materials (29)
- N1Wrought Aluminum (29)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(29)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (29)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (29)
- N6Carbon, Graphite Composites, CFRP (29)
- S High-Temp Alloys (110)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(110)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(110)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(110)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(110)
Applications
Applications
Multiple Direction Cutting (18)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (116)
- Lightly Interrupted Cut (122)
- Smooth Cut (175)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 75.0 (5)
- 90.0 (12)
- 92.0 (4)
- 93.0 (12)
to
Connection Style
Connection Style
- Toolholder (34)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (94)
- 4.0 (18)
- 8.0 (73)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 80.0 mm(1)
- 100.0 mm(1)
- 125.0 mm(8)
- 150.0 mm(16)
- 152.4 mm(3)
- 170.0 mm(4)
- 177.8 mm(1)
to
Corner Radius
Corner Radius
- 0.3 mm(63)
- 0.4 mm(38)
- 0.5 mm(79)
- 0.8 mm(64)
- 1.0 mm(7)
- 1.2 mm(19)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(153)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- KCM15 (4)
- KCP10 (28)
- KCP25 (77)
- KCP25C (32)
- KCP40 (51)
- KCU10 (53)
- KCU10B (48)
- KCU25 (44)
- KCU25B (29)
Hand Of Tool
Hand Of Tool
- L (11)
- R (23)
Wiper Insert
Wiper Insert
- N (185)
F Dimension
F Dimension
- 14.0 mm(1)
- 17.0 mm(3)
- 21.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(5)
- 26.0 mm(1)
- 27.0 mm(1)
- 31.75 mm(3)
- 32.0 mm(16)
- 38.1 mm(1)
- 40.0 mm(1)
to
Cutting Direction
Cutting Direction
- E (1)
- S (33)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (7)
- DOUBLE POSITIVE (3)
- POSITIVE-NEGATIVE (8)
- POSITIVE-ZERO (14)
Front-End
Clamp Style
Clamp Style
- X (34)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (9)
- D-DIAMOND/RHOMBIC 55 (13)
- FIX-PERFECT 2 CUT EDGES (80)
- FIX-PERFECT 4 CUT EDGES (16)
- FIX-PERFECT 8 CUT EDGES (69)
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (9)
- D-DIAMOND/RHOMBIC 55 (13)
- FIX-PERFECT 2 CUT EDGES (66)
- FIX-PERFECT 4 CUT EDGES (12)
- FIX-PERFECT 8 CUT EDGES (53)
Cutting Edge Length
Cutting Edge Length
- 6.7 mm(7)
- 6.9 mm(4)
- 7.0 mm(2)
- 7.1 mm(3)
- 7.2 mm(4)
- 7.3 mm(10)
- 7.5 mm(3)
- 7.8 mm(1)
- 8.6 mm(2)
- 8.8 mm(2)
- 8.9 mm(7)
- 9.3 mm(8)
- 10.0 mm(13)
- 10.1 mm(5)
- 10.5 mm(8)
- 10.6 mm(4)
- 10.7 mm(10)
- 10.9 mm(2)
- 11.1 mm(1)
- 13.6 mm(5)
- 13.9 mm(7)
- 14.0 mm(3)
- 14.1 mm(9)
- 14.2 mm(2)
- 14.5 mm(12)
- 14.6 mm(6)
- 14.7 mm(9)
- 17.5 mm(4)
to
Chip Breaker CBMD
Chip Breaker CBMD
- FN (3)
- HP (24)
- MN (57)
- MP (17)
- MS (8)
- RN (29)
- RP (14)
Cutting Tool Material
Cutting Tool Material
- H W (185)
Tolerance Class
Tolerance Class
- M (153)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (34)
Shank Height
Shank Height
- 12.0 mm(1)
- 16.0 mm(1)
- 20.0 mm(8)
- 25.0 mm(16)
- 25.4 mm(3)
- 31.75 mm(1)
- 32.0 mm(4)
to
Shank Width
Shank Width
- 12.0 mm(1)
- 16.0 mm(1)
- 20.0 mm(8)
- 25.0 mm(18)
- 25.4 mm(3)
- 31.75 mm(1)
- 32.0 mm(2)
to
No filters matching ""
