Face Milling
Helical Milling
Ramping: Blank
Slotting: Ball Nose
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 4109178 |
| ISO Catalog ID | KSRM125B07RC20BB |
| ANSI Catalog ID | KSRM125B07RC20BB |
| [D1MAX] Maximum Cutting Diameter | 125 mm |
| [D1MAX] Maximum Cutting Diameter | 4.921 in |
| [D1] Effective Cutting Diameter | 105 mm |
| [D1] Effective Cutting Diameter | 4.134 in |
| [D] Adapter / Shank / Bore Diameter | 40 mm |
| [D] Adapter / Shank / Bore Diameter | 1.5748 in |
| [D6] Hub Diameter | 90 mm |
| [D6] Hub Diameter | 3.543 in |
| [L] Overall Length | 63 mm |
| [L] Overall Length | 2.48 in |
| [AP1MAX] 1st Maximum Cutting Depth | 10.01 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 0.394 in |
| Number of Inserts | 7 |
| Max RPM | 14000 |
| Gage Insert | RCGX2006M0__ |
| Weight Pounds | 6.39 |
Face MillingHelical MillingRamping: BlankSlotting: Ball NoseSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Through CoolantMilling - Side and FacePocketingCreate Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .007 | .014 | .020 | .005 | .010 | .015 | .004 | .009 | .013 | .004 | .008 | .012 | .004 | .008 | .012 | .E..LF |
| .S..GF | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..GF |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .008 | .016 | .024 | .006 | .012 | .017 | .005 | .010 | .015 | .005 | .010 | .014 | .005 | .009 | .014 | .E..LF |
| .S..GF | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..GF |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .014 | .029 | .043 | .010 | .021 | .031 | .009 | .018 | .027 | .008 | .017 | .025 | .008 | .017 | .025 | .E..LF |
| .S..GF | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..GF |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .010 | .021 | .031 | .008 | .015 | .023 | .007 | .013 | .020 | .006 | .013 | .019 | .006 | .012 | .018 | .E..LF |
| .S..GF | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..GF |
| Material Group | KC725M | |||
| P | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | – | – | – | |
| 5 | – | – | – | |
| 6 | – | – | – | |
| M | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| K | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| N | 1 | – | – | – |
| 2 | – | – | – | |
| S | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | 240 | 180 | 120 | |
| H | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| insert IC | catalog number | max ramp angle | max ramp depth | max plunging depth | min hole diameter (DH min) | max flat-bottom hole diameter (DH1 max) | max diameter (no flat bottom) |
| RCGX64 | KSRM200R64BB03W150L200 | 1.27° | 0.025 | 0.045 | 2.989 | 3.253 | 4.000 |
| RCGX64 | KSRM250R64BB04S075L200 | 1.27° | 0.035 | 0.058 | 3.939 | 4.253 | 5.000 |
| RCGX64 | KSRM300R64BB05S100L200 | 1.22° | 0.044 | 0.068 | 4.904 | 5.253 | 6.000 |
| RCGX64 | KSRM400R64BB05S125L200 | 1.12° | 0.060 | 0.084 | 6.850 | 7.253 | 8.000 |
| RCGX64 | KSRM400R64BB06S125L200 | 0.73° | 0.039 | 0.083 | 6.921 | 7.253 | 8.000 |
| RCGX64 | KSRM500R64BB06S150L250 | 1.00° | 0.071 | 0.094 | 8.818 | 9.253 | 10.000 |
| RCGX64 | KSRM500R64BB08S150L250 | 0.98° | 0.069 | 0.092 | 8.823 | 9.253 | 10.000 |
| RCGX64 | KSRM600R64BB07S150L250 | 0.90° | 0.079 | 0.101 | 10.795 | 11.253 | 12.000 |
| RCGX64 | KSRM600R64BB08S150L250 | 0.90° | 0.079 | 0.100 | 10.796 | 11.253 | 12.000 |
| RCGX64 | KSRM800R64BB09S250L250 | 0.74° | 0.091 | 0.111 | 14.766 | 15.253 | 16.000 |
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | – | – | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | .E..LF | KC725M | .S..GF | KC725M | .S..GF | KC725M |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?