DAL Drills • CFRP-Ti-Stacks
Double Angle (DAL) KenDrill™ solid carbide drills are tailored for machining Carbon Fiber Reinforced Plastics (CFRP) and Titanium Alloy (Ti) metal stacks. They are ideally designed for drilling holes through thin plates. The solid carbide drill’s double-angle point design ensures smooth, bur-free exits when penetrating the metal side of the stack. The HiPACS drills are also engineered for CFRP-Ti drilling and chamfering metal stacks. These drills ensure high-precision machining and are commonly used for rivet hole machining in aerospace applications. Both DAL KenDrill and HiPACS drills are designed for lightweight and high strength holemaking of composite materials.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- N Non-Ferrous Materials (5)
- N1Wrought Aluminum (5)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(5)
- N3High-Silicon Aluminum Alloys Si >12.2%(5)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (5)
- S High-Temp Alloys (5)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(5)
- C CFRP Materials (21)
- C2CFRP / Aluminium CFRP / Non-Ferrous (21)
- C3CFRP / Titanium CFRP / High Temp (21)
- C4CFRP / Stainless Steel (21)
Applications
Applications
Convex Drilling (11)
Drilling (21)
Stacked Plates Drilling (21)
Cutting Diameter
Cutting Diameter
- 4.763 mm(2)
- 4.826 mm(1)
- 4.828 mm(2)
- 5.558 mm(2)
- 6.35 mm(4)
- 7.938 mm(4)
- 9.525 mm(4)
- 14.288 mm(2)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 20.0 mm(3)
- 24.0 mm(2)
- 27.0 mm(2)
- 29.0 mm(2)
- 30.0 mm(8)
- 35.0 mm(2)
- 45.0 mm(2)
to
Reach
Reach
- 28.0 mm(3)
- 34.0 mm(2)
- 38.0 mm(10)
- 41.0 mm(2)
- 47.0 mm(2)
- 65.0 mm(2)
to
Connection Style
Connection Style
- HC Drill Sleeve with Pocket (10)
- Straight-Cylindrical (11)
Over All Length [L]
Over All Length [L]
- 66.0 mm(3)
- 79.0 mm(4)
- 80.0 mm(10)
- 89.0 mm(2)
- 115.0 mm(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KCC05 (5)
- KDC15 (5)
- KN15 (11)
Front-End
Point Angle
Point Angle
- 128.0 (10)
- 155.0 (11)
to
Back-End
Back-End Diameter
Back-End Diameter
- 6.0 mm(7)
- 8.0 mm(8)
- 10.0 mm(4)
- 16.0 mm(2)
to
No filters matching ""
