Profiling
Kennametal is a leading manufacturer of profiling tools that deliver unparalleled performance and accuracy. A wide range of tools includes single- and double-end grooving tools for efficient and accurate grooving operations, Beyond™ Evolution™ multi-directional turning tools for high-performance turning and facing, and Top Notch™ profiling inserts for quality surface finishes. These tools are designed to meet the demands of modern machining operations and provide excellent performance, accuracy, and longevity. Experience the difference with Kennametal profiling tools and see why they are the top choice for metalworkers and machinists worldwide.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1842)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1842)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1842)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1842)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1842)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1842)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1842)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1842)
- M Stainless Steel (1834)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1834)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1834)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1834)
- K Cast Iron (1514)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1514)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1510)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1505)
- N Non-Ferrous Materials (1539)
- N1Wrought Aluminum (1508)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1461)
- N3High-Silicon Aluminum Alloys Si >12.2%(364)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1539)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1475)
- N6Carbon, Graphite Composites, CFRP (1433)
- N7MMC's (333)
- S High-Temp Alloys (1867)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1867)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1867)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1867)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1844)
- H Hardened Materials (1016)
- H1Hardened Materials 44-48 HRC(1016)
- H2Hardened Materials 48-55 HRC(844)
- H3Hardened Materials 56-60 HRC(354)
- H4Hardened Materials >60 HRC(354)
Select First Choice
- BR (23)
- CN (190)
- DE (190)
- GB (108)
- IN (33)
- SG (67)
- US (278)
Applications
Applications
Back Boring (291)
Boring (389)
CRT Profiling (20)
Chamfer Turning (69)
Cut-Off (316)
Deep Grooving (123)
Face Grooving (1097)
Facing (368)
Grooving (1333)
ID Facing (304)
ID Grooving (787)
ID Thread Turning (69)
Multiple Direction Cutting (579)
OD Thread Turning (114)
Plunge Turning (530)
Turning (538)
Type of Thread
Type of Thread
- 60 (174)
- ACME (117)
- API (109)
- API RD (76)
- BSW (73)
- BUTTRESS (169)
- M (38)
- NPT (73)
- STUB ACME (73)
- UN (169)
- UNJ (73)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1379)
- Lightly Interrupted Cut (1621)
- Smooth Cut (1822)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (13)
- 60.0 (4)
- 62.5 (2)
- 72.5 (2)
- 90.0 (843)
- 92.25 (2)
- 93.0 (1)
- 95.0 (77)
- 100.0 (1)
- 107.5 (9)
- 117.5 (8)
to
Connection Style
Connection Style
- Bolt-On Head (8)
- Boring Bar Shank (212)
- Toolholder (474)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (872)
- 2.0 (1447)
to
Over All Length [L]
Over All Length [L]
- 19.05 mm(2)
- 41.275 mm(6)
- 47.75 mm(10)
- 49.62 mm(4)
- 51.75 mm(8)
- 52.746 mm(11)
- 52.75 mm(20)
- 54.296 mm(3)
- 54.306 mm(2)
- 54.75 mm(46)
- 54.751 mm(1)
- 55.0 mm(1)
- 55.67 mm(1)
- 57.6129 mm(2)
- 57.6229 mm(19)
- 57.75 mm(4)
- 59.62 mm(4)
- 59.75 mm(14)
- 61.746 mm(2)
- 61.75 mm(4)
- 63.5 mm(4)
- 65.62 mm(2)
- 66.996 mm(6)
- 67.75 mm(4)
- 70.0 mm(2)
- 73.346 mm(3)
- 80.0 mm(3)
- 84.776 mm(2)
- 88.9 mm(6)
- 92.396 mm(2)
- 100.0 mm(6)
- 101.6 mm(5)
- 114.3 mm(69)
- 125.0 mm(108)
- 125.3 mm(12)
- 127.0 mm(40)
- 135.299 mm(2)
- 135.855 mm(2)
- 136.449 mm(4)
- 137.004 mm(4)
- 138.75 mm(4)
- 139.9 mm(11)
- 139.903 mm(1)
- 150.0 mm(118)
- 150.25 mm(4)
- 150.3 mm(5)
- 151.4 mm(10)
- 152.4 mm(173)
- 155.299 mm(2)
- 155.855 mm(2)
- 158.75 mm(4)
- 161.852 mm(2)
- 162.404 mm(2)
- 170.0 mm(47)
- 170.25 mm(4)
- 177.8 mm(23)
- 179.8 mm(2)
- 180.0 mm(14)
- 184.45 mm(2)
- 200.0 mm(36)
- 201.45 mm(7)
- 202.591 mm(1)
- 203.2 mm(7)
- 203.5 mm(4)
- 203.67 mm(6)
- 203.7 mm(4)
- 204.591 mm(1)
- 206.553 mm(2)
- 207.01 mm(1)
- 250.0 mm(20)
- 250.927 mm(1)
- 254.0 mm(15)
- 254.5 mm(3)
- 254.6 mm(1)
- 255.588 mm(1)
- 255.59 mm(1)
- 256.389 mm(2)
- 300.0 mm(12)
- 304.8 mm(14)
- 305.3 mm(3)
- 305.4 mm(2)
- 350.0 mm(2)
- 355.6 mm(12)
- 357.38 mm(1)
- 406.4 mm(10)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.0 mm(40)
- 0.025 mm(38)
- 0.05 mm(38)
- 0.075 mm(174)
- 0.1 mm(133)
- 0.125 mm(153)
- 0.15 mm(118)
- 0.175 mm(140)
- 0.2 mm(697)
- 0.225 mm(73)
- 0.25 mm(140)
- 0.275 mm(38)
- 0.3 mm(139)
- 0.325 mm(109)
- 0.35 mm(140)
- 0.4 mm(759)
- 0.45 mm(90)
- 0.475 mm(38)
- 0.5 mm(233)
- 0.575 mm(110)
- 0.75 mm(34)
- 0.775 mm(214)
- 0.8 mm(536)
- 0.825 mm(5)
- 0.9 mm(109)
- 1.0 mm(313)
- 1.05 mm(63)
- 1.075 mm(78)
- 1.175 mm(20)
- 1.2 mm(400)
- 1.225 mm(18)
- 1.25 mm(33)
- 1.5 mm(294)
- 1.55 mm(130)
- 1.575 mm(144)
- 1.6 mm(435)
- 1.65 mm(51)
- 1.75 mm(33)
- 1.975 mm(92)
- 2.0 mm(199)
- 2.05 mm(72)
- 2.075 mm(55)
- 2.375 mm(147)
- 2.4 mm(167)
- 2.45 mm(54)
- 2.5 mm(123)
- 2.525 mm(50)
- 2.55 mm(33)
- 2.575 mm(104)
- 3.0 mm(104)
- 3.025 mm(53)
- 3.05 mm(35)
- 3.075 mm(107)
- 3.175 mm(222)
- 3.25 mm(42)
- 3.95 mm(31)
- 3.975 mm(20)
- 4.0 mm(51)
- 4.025 mm(48)
- 4.075 mm(60)
- 4.775 mm(38)
- 5.0 mm(12)
- 5.025 mm(9)
- 5.075 mm(14)
- 6.35 mm(16)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(1380)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K00326 (29)
- K313 (843)
- K420 (179)
- K68 (328)
- K8735 (29)
- KB1630 (354)
- KBH20 (279)
- KC5010 (777)
- KC5025 (699)
- KC5410 (201)
- KC720 (174)
- KC730 (393)
- KC850 (323)
- KC9110 (19)
- KCK05 (32)
- KCK15B (31)
- KCK20 (407)
- KCK20B (420)
- KCM15B (59)
- KCM25 (94)
- KCM25B (5)
- KCM35B (166)
- KCP10 (451)
- KCP10B (428)
- KCP25 (451)
- KCP25B (563)
- KCP25C (915)
- KCS10 (56)
- KCS10B (255)
- KCU10 (1090)
- KCU10B (1115)
- KCU25 (1047)
- KCU25B (1075)
- KD1405 (190)
- KD1425 (174)
- KMS (78)
- KS15 (29)
- KT315 (486)
- KY3500 (264)
- KYS30 (121)
Hand Of Tool
Hand Of Tool
- L (328)
- N (14)
- R (404)
Wiper Insert
Wiper Insert
- N (1985)
F Dimension
F Dimension
- 6.553 mm(2)
- 7.0 mm(2)
- 8.17 mm(1)
- 8.23 mm(2)
- 8.52 mm(4)
- 8.875 mm(2)
- 9.0 mm(6)
- 9.398 mm(2)
- 9.525 mm(4)
- 9.76 mm(1)
- 10.23 mm(1)
- 10.24 mm(1)
- 10.312 mm(1)
- 10.785 mm(1)
- 10.875 mm(1)
- 10.973 mm(2)
- 11.0 mm(11)
- 11.06 mm(7)
- 11.1 mm(2)
- 12.1 mm(2)
- 12.17 mm(2)
- 12.22 mm(1)
- 12.5 mm(1)
- 12.57 mm(1)
- 12.573 mm(5)
- 12.624 mm(1)
- 12.7 mm(5)
- 12.73 mm(3)
- 12.74 mm(2)
- 12.79 mm(2)
- 12.81 mm(2)
- 12.85 mm(2)
- 12.91 mm(2)
- 13.0 mm(17)
- 13.03 mm(2)
- 13.94 mm(2)
- 13.97 mm(4)
- 14.0 mm(2)
- 14.148 mm(2)
- 14.27 mm(5)
- 14.275 mm(5)
- 15.88 mm(2)
- 15.92 mm(1)
- 15.97 mm(4)
- 16.0 mm(5)
- 16.02 mm(1)
- 16.1 mm(1)
- 16.2 mm(5)
- 16.22 mm(2)
- 16.256 mm(2)
- 16.871 mm(1)
- 16.873 mm(4)
- 17.0 mm(15)
- 17.3 mm(6)
- 17.348 mm(2)
- 17.475 mm(2)
- 17.48 mm(2)
- 17.5 mm(2)
- 18.923 mm(2)
- 19.03 mm(1)
- 19.05 mm(9)
- 19.08 mm(11)
- 19.084 mm(5)
- 19.101 mm(1)
- 19.13 mm(12)
- 19.134 mm(6)
- 19.23 mm(4)
- 19.234 mm(3)
- 19.253 mm(2)
- 19.43 mm(1)
- 19.431 mm(1)
- 20.0 mm(4)
- 20.06 mm(14)
- 20.1 mm(2)
- 20.11 mm(26)
- 20.19 mm(7)
- 20.2 mm(13)
- 20.21 mm(6)
- 20.3 mm(2)
- 21.13 mm(4)
- 21.77 mm(1)
- 21.8 mm(1)
- 22.0 mm(14)
- 22.225 mm(3)
- 22.61 mm(2)
- 25.0 mm(14)
- 25.06 mm(12)
- 25.11 mm(20)
- 25.19 mm(1)
- 25.2 mm(6)
- 25.21 mm(8)
- 25.3 mm(2)
- 25.335 mm(2)
- 25.34 mm(2)
- 25.4 mm(21)
- 25.43 mm(12)
- 25.476 mm(2)
- 25.48 mm(12)
- 25.484 mm(5)
- 25.485 mm(2)
- 25.499 mm(1)
- 25.5 mm(3)
- 25.578 mm(1)
- 25.58 mm(4)
- 25.584 mm(3)
- 25.71 mm(5)
- 25.77 mm(1)
- 25.806 mm(2)
- 25.875 mm(1)
- 25.908 mm(2)
- 26.0 mm(2)
- 26.213 mm(2)
- 27.0 mm(5)
- 27.9 mm(1)
- 28.45 mm(1)
- 28.575 mm(3)
- 29.87 mm(3)
- 30.0 mm(8)
- 30.4 mm(1)
- 30.8 mm(1)
- 31.75 mm(32)
- 31.826 mm(2)
- 31.83 mm(8)
- 31.93 mm(4)
- 32.0 mm(26)
- 32.06 mm(4)
- 32.08 mm(8)
- 32.156 mm(2)
- 32.18 mm(4)
- 32.258 mm(2)
- 32.31 mm(4)
- 32.41 mm(2)
- 32.537 mm(2)
- 32.563 mm(2)
- 32.66 mm(2)
- 33.1 mm(1)
- 34.875 mm(1)
- 34.925 mm(4)
- 35.0 mm(2)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.1 mm(19)
- 38.176 mm(2)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.506 mm(2)
- 38.608 mm(2)
- 38.76 mm(2)
- 38.9 mm(1)
- 38.913 mm(2)
- 39.1 mm(2)
- 40.0 mm(4)
- 40.18 mm(2)
- 40.31 mm(2)
- 40.66 mm(2)
- 41.275 mm(5)
- 44.45 mm(2)
- 47.625 mm(2)
- 50.8 mm(7)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 11.176 mm(1)
- 11.18 mm(1)
- 11.5 mm(2)
- 15.88 mm(4)
- 16.0 mm(8)
- 16.764 mm(2)
- 17.0 mm(3)
- 17.018 mm(2)
- 18.5 mm(2)
- 18.542 mm(4)
- 19.05 mm(1)
- 20.0 mm(15)
- 20.32 mm(1)
- 21.0 mm(3)
- 22.0 mm(3)
- 22.86 mm(4)
- 24.89 mm(4)
- 24.892 mm(2)
- 25.0 mm(23)
- 25.4 mm(6)
- 26.0 mm(7)
- 26.92 mm(1)
- 28.575 mm(3)
- 28.58 mm(1)
- 31.75 mm(6)
- 32.0 mm(20)
- 33.02 mm(5)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 38.1 mm(4)
- 40.0 mm(14)
- 44.0 mm(6)
- 44.45 mm(2)
- 45.06 mm(1)
- 46.48 mm(1)
- 50.0 mm(1)
- 50.8 mm(4)
- 52.0 mm(11)
- 53.848 mm(1)
- 54.0 mm(4)
- 57.15 mm(6)
- 60.325 mm(2)
- 63.0 mm(1)
- 63.5 mm(4)
- 65.0 mm(1)
- 69.85 mm(4)
- 70.0 mm(1)
- 76.2 mm(4)
- 82.55 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(75)
- 11.176 mm(1)
- 11.18 mm(1)
- 11.5 mm(2)
- 15.88 mm(4)
- 16.0 mm(12)
- 16.764 mm(2)
- 17.0 mm(3)
- 17.018 mm(2)
- 18.5 mm(2)
- 18.542 mm(4)
- 19.05 mm(1)
- 19.99 mm(1)
- 20.0 mm(20)
- 20.32 mm(1)
- 21.0 mm(3)
- 22.0 mm(3)
- 22.86 mm(4)
- 24.89 mm(4)
- 24.892 mm(2)
- 24.994 mm(1)
- 25.0 mm(32)
- 25.4 mm(6)
- 26.0 mm(7)
- 26.92 mm(1)
- 28.0 mm(1)
- 28.575 mm(3)
- 28.58 mm(1)
- 31.75 mm(6)
- 32.0 mm(20)
- 33.02 mm(5)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 36.0 mm(5)
- 37.998 mm(1)
- 38.1 mm(8)
- 40.0 mm(14)
- 41.3 mm(34)
- 42.0 mm(5)
- 44.0 mm(6)
- 44.45 mm(2)
- 45.06 mm(1)
- 46.48 mm(1)
- 47.6 mm(34)
- 48.0 mm(3)
- 50.0 mm(6)
- 50.8 mm(4)
- 52.0 mm(14)
- 53.848 mm(1)
- 54.0 mm(4)
- 55.88 mm(3)
- 56.625 mm(21)
- 57.15 mm(6)
- 57.2 mm(15)
- 58.0 mm(4)
- 60.0 mm(4)
- 60.325 mm(4)
- 63.0 mm(1)
- 63.5 mm(22)
- 64.0 mm(4)
- 65.0 mm(1)
- 68.0 mm(4)
- 69.85 mm(4)
- 70.0 mm(8)
- 76.2 mm(8)
- 80.0 mm(7)
- 82.55 mm(4)
- 88.9 mm(112)
- 90.0 mm(8)
- 92.0 mm(3)
- 100.0 mm(4)
- 120.0 mm(13)
- 127.0 mm(1)
- 130.0 mm(4)
- 132.0 mm(4)
- 139.7 mm(244)
- 146.05 mm(3)
- 174.6 mm(34)
- 184.0 mm(3)
- 200.0 mm(8)
- 209.6 mm(111)
- 222.3 mm(15)
- 250.0 mm(6)
- 290.0 mm(8)
- 333.0 mm(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(4)
- 21.0 mm(3)
- 23.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(5)
- 26.0 mm(2)
- 27.0 mm(9)
- 28.0 mm(7)
- 34.0 mm(7)
- 35.0 mm(2)
- 35.992 mm(1)
- 36.0 mm(12)
- 38.0 mm(1)
- 46.0 mm(1)
- 48.0 mm(4)
- 54.0 mm(2)
- 58.0 mm(3)
- 58.001 mm(1)
- 64.0 mm(3)
- 72.0 mm(3)
- 74.0 mm(3)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(8)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 200.0 mm(2)
- 212.0 mm(4)
- 254.0 mm(4)
- 300.0 mm(12)
- 999.0 mm(11)
- 9999.0 mm(539)
to
Countersunk Angle
Countersunk Angle
- 17.5 (4)
to
Cutting Direction
Cutting Direction
- B (94)
- E (478)
- P (4)
- S (170)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (7)
- DOUBLE POSITIVE (5)
- NEGATIVE-ZERO (90)
- NEUTRAL (ZERO) (302)
- POSITIVE-ZERO (186)
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(4)
- 25.4 mm(14)
- 31.26 mm(1)
- 31.3 mm(1)
- 31.75 mm(6)
- 32.0 mm(4)
- 32.8 mm(1)
- 38.1 mm(7)
- 40.0 mm(15)
- 40.28 mm(2)
- 40.3 mm(2)
- 48.0 mm(4)
- 50.0 mm(9)
- 50.3 mm(8)
- 50.8 mm(34)
- 63.4 mm(2)
- 63.48 mm(1)
- 63.5 mm(6)
- 63.74 mm(1)
- 64.0 mm(18)
- 64.01 mm(1)
- 72.0 mm(2)
- 76.2 mm(13)
- 80.0 mm(17)
- 95.25 mm(4)
- 96.0 mm(2)
- 100.0 mm(11)
- 101.6 mm(13)
- 114.3 mm(4)
- 126.8 mm(1)
- 127.0 mm(4)
- 128.0 mm(6)
- 152.4 mm(9)
- 160.0 mm(5)
- 177.8 mm(3)
- 200.0 mm(2)
- 203.2 mm(8)
- 228.6 mm(1)
- 254.0 mm(7)
to
Boring Bar Material
Boring Bar Material
- C (19)
- S (201)
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (79)
Clamp Style
Clamp Style
- N (284)
- T (53)
- Y (600)
Cutting Width
Cutting Width
- 0.5 mm(60)
- 0.787 mm(65)
- 0.8 mm(60)
- 0.889 mm(31)
- 0.991 mm(60)
- 1.0 mm(144)
- 1.041 mm(60)
- 1.19 mm(95)
- 1.194 mm(138)
- 1.2 mm(133)
- 1.39 mm(60)
- 1.397 mm(31)
- 1.4 mm(60)
- 1.473 mm(60)
- 1.49 mm(9)
- 1.5 mm(145)
- 1.57 mm(108)
- 1.575 mm(213)
- 1.6 mm(14)
- 1.69 mm(31)
- 1.7 mm(60)
- 1.702 mm(60)
- 1.75 mm(133)
- 1.829 mm(73)
- 1.94 mm(29)
- 1.95 mm(60)
- 1.956 mm(29)
- 1.981 mm(73)
- 1.99 mm(72)
- 2.0 mm(298)
- 2.007 mm(60)
- 2.12 mm(63)
- 2.125 mm(130)
- 2.13 mm(89)
- 2.2 mm(133)
- 2.235 mm(104)
- 2.236 mm(38)
- 2.24 mm(60)
- 2.25 mm(95)
- 2.38 mm(1)
- 2.387 mm(90)
- 2.388 mm(250)
- 2.39 mm(37)
- 2.464 mm(73)
- 2.49 mm(1)
- 2.5 mm(136)
- 2.51 mm(52)
- 2.511 mm(52)
- 2.62 mm(1)
- 2.667 mm(73)
- 2.74 mm(29)
- 2.743 mm(31)
- 2.75 mm(133)
- 2.794 mm(73)
- 2.997 mm(104)
- 3.0 mm(330)
- 3.05 mm(79)
- 3.099 mm(73)
- 3.1 mm(78)
- 3.11 mm(78)
- 3.12 mm(101)
- 3.125 mm(53)
- 3.13 mm(90)
- 3.17 mm(91)
- 3.175 mm(388)
- 3.177 mm(41)
- 3.18 mm(138)
- 3.2 mm(123)
- 3.245 mm(60)
- 3.25 mm(73)
- 3.251 mm(38)
- 3.27 mm(29)
- 3.3 mm(45)
- 3.301 mm(40)
- 3.302 mm(46)
- 3.32 mm(38)
- 3.5 mm(142)
- 3.607 mm(73)
- 3.81 mm(31)
- 3.82 mm(31)
- 3.835 mm(31)
- 3.84 mm(60)
- 3.96 mm(78)
- 3.962 mm(86)
- 3.974 mm(39)
- 3.988 mm(73)
- 4.0 mm(235)
- 4.094 mm(42)
- 4.1 mm(62)
- 4.11 mm(62)
- 4.12 mm(74)
- 4.125 mm(55)
- 4.242 mm(36)
- 4.25 mm(73)
- 4.5 mm(109)
- 4.521 mm(73)
- 4.699 mm(73)
- 4.75 mm(47)
- 4.76 mm(112)
- 4.762 mm(104)
- 4.763 mm(47)
- 4.775 mm(150)
- 4.78 mm(21)
- 4.785 mm(23)
- 4.788 mm(26)
- 4.8 mm(73)
- 4.801 mm(109)
- 4.873 mm(43)
- 4.877 mm(53)
- 4.878 mm(42)
- 4.88 mm(38)
- 4.95 mm(73)
- 4.953 mm(38)
- 4.978 mm(73)
- 5.0 mm(140)
- 5.004 mm(19)
- 5.1 mm(49)
- 5.12 mm(52)
- 5.125 mm(105)
- 5.13 mm(51)
- 5.41 mm(36)
- 5.5 mm(36)
- 6.0 mm(140)
- 6.12 mm(53)
- 6.125 mm(108)
- 6.13 mm(52)
- 6.346 mm(35)
- 6.35 mm(182)
- 6.36 mm(24)
- 6.477 mm(42)
- 6.478 mm(34)
- 6.502 mm(36)
- 7.0 mm(34)
- 7.125 mm(34)
- 7.137 mm(2)
- 7.317 mm(36)
- 7.92 mm(25)
- 7.925 mm(28)
- 7.937 mm(18)
- 7.938 mm(20)
- 7.94 mm(18)
- 8.0 mm(51)
- 8.051 mm(20)
- 8.052 mm(29)
- 8.125 mm(60)
- 8.13 mm(19)
- 9.525 mm(21)
- 9.53 mm(8)
- 9.651 mm(8)
- 9.677 mm(3)
- 9.754 mm(8)
- 10.0 mm(20)
- 10.125 mm(22)
- 10.13 mm(9)
to
Front End Type
Front End Type
- MCS - Modular Cartridge System (79)
Insert Shape
Insert Shape
- D-DIAMOND/RHOMBIC 55 (30)
- K-PARALLELOGRAM 55 (5)
- N/K-PARALLELOGRAM 55 (273)
- PRISMATIC (997)
- R-ROUND (105)
- TN-TOP NOTCH (597)
- V-DIAMOND/RHOMBIC 35 (157)
Cartridge Size
Cartridge Size
- 50 (237)
- 65 (110)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (79)
Insert Size
Insert Size
- 1 (5)
- 10 (12)
- 1F (12)
- 2 (129)
- 2S (11)
- 3 (118)
- 3S (8)
- 4 (92)
- 4S (1)
- 5 (58)
- 5S (2)
- 6 (68)
- 8 (30)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(29)
- 1.016 mm(1)
- 1.6 mm(2)
- 1.69 mm(1)
- 1.9 mm(1)
- 2.953 mm(2)
- 3.08 mm(1)
- 3.3 mm(1)
- 3.505 mm(17)
- 3.51 mm(17)
- 4.7 mm(1)
- 5.0 mm(11)
- 5.33 mm(14)
- 5.334 mm(19)
- 6.2 mm(1)
- 6.35 mm(2)
- 7.0 mm(37)
- 7.46 mm(8)
- 7.468 mm(9)
- 7.47 mm(6)
- 7.62 mm(1)
- 8.0 mm(9)
- 8.001 mm(1)
- 8.484 mm(4)
- 9.0 mm(1)
- 10.0 mm(29)
- 10.54 mm(1)
- 10.541 mm(1)
- 10.543 mm(1)
- 11.0 mm(4)
- 12.0 mm(61)
- 12.7 mm(8)
- 13.5 mm(9)
- 13.919 mm(2)
- 13.995 mm(2)
- 14.0 mm(96)
- 14.5 mm(4)
- 16.0 mm(76)
- 17.0 mm(41)
- 17.5 mm(3)
- 18.999 mm(1)
- 19.0 mm(22)
- 19.05 mm(18)
- 20.0 mm(26)
- 21.387 mm(2)
- 22.0 mm(32)
- 24.0 mm(29)
- 25.4 mm(6)
- 25.999 mm(6)
- 26.0 mm(61)
- 31.75 mm(6)
- 32.0 mm(26)
- 38.1 mm(3)
- 40.0 mm(12)
- 49.53 mm(2)
- 57.15 mm(2)
to
Gage Length
Gage Length
- 28.0000 mm(2)
- 33.0000 mm(2)
- 38.0000 mm(2)
- 43.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(6)
- 49.0000 mm(4)
- 53.5000 mm(4)
- 55.5000 mm(2)
- 57.0000 mm(6)
- 58.0000 mm(6)
- 58.5000 mm(7)
- 60.5000 mm(2)
- 63.5000 mm(14)
- 65.5000 mm(2)
- 66.5000 mm(4)
- 68.5000 mm(4)
- 73.5000 mm(4)
- 138.1500 mm(3)
- 138.7500 mm(4)
- 139.2500 mm(4)
- 139.9000 mm(11)
- 139.9030 mm(1)
- 140.4000 mm(10)
- 140.5500 mm(7)
- 150.0000 mm(4)
- 152.4000 mm(8)
- 158.1500 mm(2)
- 158.7500 mm(4)
- 159.2500 mm(4)
- 165.9500 mm(2)
- 170.0000 mm(3)
- 177.8000 mm(4)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 1.0 mm(8)
- 1.063 mm(6)
- 1.5 mm(13)
- 1.56 mm(12)
- 1.588 mm(6)
- 1.59 mm(4)
- 1.905 mm(1)
- 1.97 mm(6)
- 1.981 mm(6)
- 2.0 mm(9)
- 2.06 mm(10)
- 2.38 mm(8)
- 2.5 mm(13)
- 2.54 mm(11)
- 2.563 mm(11)
- 2.921 mm(26)
- 3.0 mm(12)
- 3.063 mm(9)
- 3.175 mm(11)
- 3.81 mm(40)
- 3.969 mm(2)
- 4.0 mm(8)
- 4.063 mm(9)
- 4.15 mm(1)
- 4.763 mm(2)
- 4.9 mm(1)
- 5.0 mm(4)
- 5.063 mm(6)
- 8.2 mm(1)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 28.0 mm(1)
- 70.0 mm(3)
- 90.0 mm(2)
- 120.0 mm(5)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 38.0 mm(1)
to
Insert Geometry
Shape
Shape
- D-DIAMOND/RHOMBIC 55 (25)
- K-PARALLELOGRAM 55 (1)
- N/K-PARALLELOGRAM 55 (217)
- PRISMATIC (373)
- R-ROUND (52)
- TN-TOP NOTCH (412)
- V-DIAMOND/RHOMBIC 35 (122)
Insert IC Size
Insert IC Size
- 4.75 mm(3)
- 4.775 mm(11)
- 6.35 mm(27)
- 9.525 mm(125)
- 12.7 mm(35)
to
Insert Seat Size
Insert Seat Size
- 10 (13)
- 2 (103)
- 2S (2)
- 3 (312)
- 3S (2)
- 4 (176)
- 5 (43)
- 5S (2)
- 6 (74)
- 8 (58)
Cutting Edge Length
Cutting Edge Length
- 0.252 mm(2)
- 0.419 mm(2)
- 11.07 mm(1)
- 11.071 mm(11)
- 11.597 mm(126)
- 11.6 mm(4)
- 11.63 mm(6)
- 15.442 mm(48)
- 15.5 mm(1)
- 15.504 mm(24)
- 16.606 mm(105)
- 16.61 mm(5)
- 17.51 mm(9)
- 22.731 mm(6)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 08 (39)
- 1 (7)
- 15 (104)
- 2 (2)
- 20 (35)
- 25 (13)
- 32 (2)
- FP (73)
- FS (16)
- HP (16)
- MP (4)
Cutting Tool Material
Cutting Tool Material
- B H (354)
- B L (499)
- C N (266)
- D P (364)
- H T (486)
- H W (2126)
Tolerance Class
Tolerance Class
- G (308)
- M (65)
- U (44)
Back-End
Connection Type
Connection Type
- BORING BAR (212)
- BORING BAR HEAD (8)
- SQUARE SHANK (526)
System Size
System Size
- KM40TS (4)
- KM4X63 (4)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (11)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (8)
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(11)
- 12.7 mm(14)
- 15.87 mm(5)
- 15.875 mm(11)
- 16.0 mm(14)
- 19.0 mm(1)
- 19.05 mm(22)
- 20.0 mm(18)
- 25.0 mm(22)
- 25.4 mm(26)
- 31.7 mm(2)
- 31.75 mm(11)
- 32.0 mm(16)
- 38.1 mm(12)
- 40.0 mm(19)
- 44.45 mm(3)
- 50.0 mm(18)
- 50.8 mm(9)
- 57.15 mm(1)
- 63.0 mm(31)
- 63.5 mm(7)
- 80.0 mm(24)
to
Shank Height
Shank Height
- 9.525 mm(2)
- 10.0 mm(2)
- 11.41 mm(2)
- 12.0 mm(8)
- 12.7 mm(12)
- 15.41 mm(2)
- 15.875 mm(13)
- 16.0 mm(13)
- 19.05 mm(72)
- 20.0 mm(95)
- 23.82 mm(4)
- 25.0 mm(108)
- 25.4 mm(122)
- 30.82 mm(6)
- 31.75 mm(71)
- 32.0 mm(56)
- 38.1 mm(37)
- 38.82 mm(5)
- 40.0 mm(6)
- 46.96 mm(2)
to
Shank Width
Shank Width
- 9.525 mm(2)
- 10.0 mm(2)
- 12.0 mm(8)
- 12.7 mm(12)
- 15.875 mm(13)
- 16.0 mm(14)
- 18.86 mm(1)
- 19.05 mm(71)
- 20.0 mm(94)
- 21.96 mm(4)
- 25.0 mm(125)
- 25.4 mm(122)
- 28.96 mm(6)
- 31.75 mm(71)
- 32.0 mm(39)
- 36.96 mm(5)
- 38.1 mm(37)
- 40.0 mm(6)
- 46.96 mm(2)
to
No filters matching ""
For any technical inquiries, please reach out to us via our Customer Support center