High-Performance • Micro-Machining End Mills
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (78)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(51)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(78)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(78)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(42)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (23)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(23)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(23)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
- K Cast Iron (51)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(51)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(51)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (23)
- N1Wrought Aluminum (23)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
- N3High-Silicon Aluminum Alloys Si >12.2%(14)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
- N6Carbon, Graphite Composites, CFRP (14)
- N7MMC's (14)
- S High-Temp Alloys (14)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
- H Hardened Materials (69)
- H1Hardened Materials 44-48 HRC(69)
- H2Hardened Materials 48-55 HRC(69)
- H3Hardened Materials 56-60 HRC(69)
- H4Hardened Materials >60 HRC(41)
Applications
Applications
Pocket (14)
Pocket Helical (14)
Pocket Milling (14)
Profile Milling (28)
Ramping (32)
Shoulder Ball Nose (30)
Shoulder Milling (14)
Slot Milling (14)
Slot Square End (46)
Cutting Diameter
Cutting Diameter
- 0.2 mm(1)
- 0.3 mm(4)
- 0.4 mm(4)
- 0.5 mm(8)
- 0.6 mm(5)
- 0.7 mm(1)
- 0.8 mm(8)
- 1.0 mm(9)
- 1.2 mm(4)
- 1.4 mm(2)
- 1.5 mm(6)
- 1.6 mm(3)
- 1.8 mm(3)
- 2.0 mm(8)
- 2.5 mm(5)
- 3.0 mm(3)
- 4.0 mm(3)
- 6.0 mm(1)
to
Cutting Length
Cutting Length
- 0.3 mm(2)
- 0.4 mm(2)
- 0.5 mm(2)
- 0.5004 mm(1)
- 0.6 mm(4)
- 0.7 mm(5)
- 0.8 mm(1)
- 0.9 mm(2)
- 1.0 mm(2)
- 1.2 mm(6)
- 1.5 mm(8)
- 1.6 mm(4)
- 1.7 mm(1)
- 1.8 mm(3)
- 1.9 mm(1)
- 2.0 mm(5)
- 2.1 mm(2)
- 2.3 mm(2)
- 2.4 mm(3)
- 2.5 mm(2)
- 2.7 mm(2)
- 3.0 mm(4)
- 3.2 mm(3)
- 3.7 mm(2)
- 4.0 mm(2)
- 5.0 mm(1)
- 6.0 mm(3)
- 8.0 mm(1)
- 9.0 mm(1)
- 12.0 mm(1)
to
Reach
Reach
- 0.3 mm(1)
- 0.4 mm(1)
- 0.6 mm(1)
- 0.9 mm(1)
- 1.0 mm(1)
- 1.5 mm(3)
- 1.8 mm(2)
- 1.9 mm(1)
- 2.0 mm(1)
- 2.2 mm(3)
- 2.3 mm(1)
- 2.4 mm(2)
- 2.5 mm(4)
- 2.6 mm(1)
- 2.9 mm(1)
- 3.0 mm(5)
- 3.2 mm(1)
- 3.5 mm(4)
- 3.7 mm(1)
- 3.8 mm(1)
- 4.0 mm(4)
- 4.5 mm(2)
- 5.0 mm(6)
- 6.0 mm(5)
- 7.0 mm(1)
- 7.5 mm(1)
- 8.0 mm(1)
- 9.0 mm(2)
- 10.0 mm(4)
- 11.5 mm(1)
- 12.0 mm(1)
- 12.5 mm(1)
- 16.0 mm(4)
- 20.0 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (64)
to
Number of Flutes
Number of Flutes
- 2 (55)
- 3 (12)
- 4 (11)
Over All Length [L]
Over All Length [L]
- 38.0 mm(17)
- 40.0 mm(14)
- 50.0 mm(28)
- 60.0 mm(10)
- 65.0 mm(7)
- 70.0 mm(2)
to
Corner Style
Corner Style
- BALL NOSE (32)
- SQUARE END (46)
Corner Radius
Corner Radius
- 0.0 mm(46)
- 0.15 mm(1)
- 0.2 mm(1)
- 0.25 mm(2)
- 0.3 mm(2)
- 0.4 mm(2)
- 0.5 mm(5)
- 0.6 mm(1)
- 0.75 mm(3)
- 0.8 mm(1)
- 0.9 mm(1)
- 1.0 mm(5)
- 1.25 mm(2)
- 1.5 mm(2)
- 2.0 mm(3)
- 3.0 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC639M (55)
- KCPM15 (9)
- KCSM10 (14)
Rough Finish
Rough Finish
- F (64)
- FR (14)
Front-End
Neck Diameter
Neck Diameter
- 0.18 mm(1)
- 0.28 mm(2)
- 0.37 mm(2)
- 0.44 mm(3)
- 0.47 mm(3)
- 0.54 mm(2)
- 0.57 mm(1)
- 0.67 mm(1)
- 0.74 mm(4)
- 0.77 mm(3)
- 0.94 mm(2)
- 0.95 mm(3)
- 0.96 mm(1)
- 1.14 mm(3)
- 1.34 mm(3)
- 1.44 mm(3)
- 1.54 mm(2)
- 1.55 mm(1)
- 1.74 mm(2)
- 1.75 mm(1)
- 1.94 mm(6)
- 2.4 mm(1)
- 2.44 mm(2)
- 2.9 mm(1)
- 3.92 mm(1)
- 3.94 mm(1)
- 5.9 mm(1)
to
Back-End
Back-End Diameter
Back-End Diameter
- 3.0 mm(17)
- 4.0 mm(21)
- 6.0 mm(40)
to
No filters matching ""
