✉ 保持联系
© 2022 Terms & Conditions of Use | Conditions of Sale | Data Privacy Policy
Kennametal Inc. 525 William Penn Place Suite 3300, Pittsburgh, PA 15219
New customer
Are you new to Kennametal? Create and account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InShip-to
Change Account
New customer
Are you new to Kennametal? Create and account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InShip-to
Change Account
successfully added to cart
View Cart
View Cart
Notifications
Mark all as read经检验在以下方面具有超凡性能：
Use Case
- 车床：Wirtgen W210i (2180h)
- Engine Power: 283 + 231 kW
- Line Spacing: 25mm (Eco Cutter Drum)
- Width of drum: 2000mm
- 夹具：HT22 (almost new, good condition)
- Holders on drum: 100
- Belt condition: 好
- Track pad condition: 中型
Total Cutting Performance
- Total m²: 19.283 m²
- Total m³: 1.353 m³
- Total tons: 3.247 tons (density: 2400kg/m³)
- Total fuel (PCD): 830l + 467l = 1297l
- Total fuel (Carbide): 834l + 500l = 1334l
Use Case
- 车床：Wirtgen W210XP
- Holder System: HT22 (new)
- A2 - 切削宽度 3.0mm
- Line Spacing: 10mm
- 材料：Asphalt (medium hard)
- Cutting Depth: 2 – 6cm
- Velocity: Varying up to 30m/min
Total Cutting Performance
- Total square meter: 77,000
- Cutting depth average: 4cm
- Total cubic meters: 3,080
Road King Xtreme vs. a conventional tool body after 20,000m2 of asphalt
Use Case
- 车床：Wirtgen W150 CFI
- Holder System: HT22 (new)
- A2 - 切削宽度 3.0mm
- Line Spacing: 18mm
- 材料：Asphalt (very hard)
- 切深 Varying up to 16cm
- Velocity: Varying up to 25m/minn
Total Cutting Performance
- Time in use: 65h
- Total tons: 5,802
- Total square meters: 28,372
- Total cubic meters: 2,321
- Depending on application this equals approx. 11 sets of conventional carbide tools
Balanced wear on all units after milling more than 65 hours
Use Case
- 车床：Wirtgen W250
- A2 - 切削宽度 3.0mm
- 材料：Asphalt (high proportion of quartz)
- 最大切深
- Velocity: 20m/min
- Fuel Consumption: 235 liters / 4h
Total Cutting Performance
- In this case, conventional tools are changed three times per shift. Each change takes roughly 20 minutes.
- Time needed with conventional tools: 4.0 Hours
- Time needed with Road King Xtreme: 2.5 Hours
