successfully added to cart
View Cart
High-Feed Milling Cutters
High-Feed Milling Cutters
High-Feed Milling Cutters
High-Feed Milling Cutters

7792VXD09 Modular Head Screw-On • Inch

High-Feed Milling Cutters

Features and benefits

  • Ultra-fine pitch cutters available to increase material removal rates, especially on high-temp alloys.

  • Positive design to support lower cutting forces and long overhang usage.

  • Ramping and plunge milling capabilities.

  • Screw-on cutters provide better rigidity and stability when used with small spindles: BT30, BT40, DV40, HSK50, HSK63, etc.

  • Screw-on cutters can be less expensive when compared to cylindrical shank cutters due to their higher flexibility through multiple holder combinations.

Uses and application

  • 端面铣削端面铣削
  • 坡铣: 毛坯坡铣: 毛坯
  • 螺旋铣削螺旋铣削
  • 刀座刀座
  • 插铣: 球形刀尖插铣: 球形刀尖
  • 沉孔加工沉孔加工
  • Slotting: ShoulderSlotting: Shoulder
  • Spiral CircularSpiral Circular
  • Inclined Square End MillInclined Square End Mill
  • 铣削 —  贯通式冷却铣削 — 贯通式冷却
  • 刀柄 —  旋入式刀柄 — 旋入式

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
Select First Choice
  • US (2)
Applications
  • Chamfer Milling Chamfer Milling (2)
  • Drilling Drilling (2)
  • Face Milling Face Milling (2)
  • Flat Bottom Drilling Flat Bottom Drilling (2)
  • Pipe Thread Pipe Thread (2)
  • Pocket Pocket (2)
  • Pocket Helical Pocket Helical (2)
  • Pocket Milling Pocket Milling (2)
  • Pocket Plunge Milling Pocket Plunge Milling (2)
  • Profile Milling Profile Milling (2)
  • Ramping Ramping (2)
  • Shoulder Ball Nose Shoulder Ball Nose (2)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (2)
  • Shoulder Milling Shoulder Milling (2)
  • Shoulder Roughing Shoulder Roughing (2)
  • Shoulder Square End Shoulder Square End (2)
  • Slot Ball Nose Slot Ball Nose (2)
  • Slot Milling Slot Milling (2)
  • Slot Side Slot Side (2)
  • Slot Square End Slot Square End (2)
  • Slot T Slot T (2)
  • Thread Milling Thread Milling (2)
  • Threading Threading (2)
Cutting Diameter
  • 12.379 (1)
  • 18.754 (1)
to
Cutting Diameter
  • 0.4874 (1)
  • 0.7384 (1)
to
Cutting Length
  • 0.0591 (2)
to
Cutting Length
  • 1.5 (2)
to
Reach
  • 35.0 (1)
  • 43.0 (1)
to
Reach
  • 1.378 (1)
  • 1.692 (1)
to
Tool Cutting Edge Angle
  • 15.0 (2)
to
Connection Style
  • Screw-On Connection (2)
Cutting Edges Per Insert
  • 4.0 (2)
to
cornerConfiguration
Corner Radius
  • 0.798 (2)
  • 0.8 (2)
  • 1.194 (2)
  • 1.2 (2)
to
Corner Radius
  • 0.031 (2)
  • 0.0314 (2)
  • 0.0315 (2)
  • 0.047 (2)
to
application
Grade Of Cutting Tool
  • GH2 (2)
  • KC510M (2)
  • KC522M (2)
  • KC725M (2)
  • KCK15 (2)
  • KCPK30 (2)
  • KCPM40 (2)
  • KCSM40 (2)
  • SC3025 (2)
  • SC6525 (2)
  • SP2019 (2)
  • SP4019 (2)
  • SP4659 (2)
  • SP6519 (2)
  • X400 (2)
  • X500 (2)
  • X700 (2)
Hand Of Tool
  • R (2)
Maximum Ramp Angle
  • 1.5 (1)
  • 2.7 (1)
to
frontEnd
Insert Shape
  • S-SQUARE 90 (2)
backEnd
Connection Type
  • SCREW-ON (2)
Back-End Diameter
  • 0.8268 (1)
  • 1.1417 (1)
to
Back-End Diameter
  • 21.0 (1)
  • 29.0 (1)
to
other
Grade
  • S (2)
Platform
  • Stellram (2)
Tool Unit
  • I (2)
Over All Length [L]
  • 57.0 (1)
  • 66.0 (1)
to
Over All Length [L]
  • 2.2441 (1)
  • 2.5984 (1)
to
Head Length [L2]
  • 35.0 (1)
  • 43.0 (1)
to
Head Length [L2]
  • 1.378 (1)
  • 1.692 (1)
to
obsoleteFacet
  • false (2)
  • true (2)
Number of Inserts
  • 2.0 (1)
  • 3.0 (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 2 of 2 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L2] Head Length [L2] Head Length [G3X] Connection Thread Size External [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
5659840 A7792VXD09SA1.0Z2R1.4 A7792VXD09SA1.0Z2R1.4   S 25.4000 1.000 12.3790 .4874 35.0000 1.378 M12 12.5000 .4921 1.5000 .0591 2
    5660449 A7792VXD09SA1.25Z3R2 A7792VXD09SA1.25Z3R2   S 31.7500 1.250 18.7540 .7384 43.0000 1.692 M16 17.0000 .6693 1.5000 .0591 3
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Grades

      • S
        P Steel
        M Stainless Steel
        K Cast Iron
        N Non-Ferrous
        S High-Temp Alloys
        H Hardened Materials
      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart