Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

孔加工

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10895)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10356)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10404)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10407)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10407)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10287)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10645)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10579)
  • M Stainless Steel (8603)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8603)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8603)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8294)
  • K Cast Iron (9435)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9435)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9339)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9339)
  • N Non-Ferrous Materials (7144)
    • N1
      Wrought Aluminum
      (7102)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7138)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7108)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7062)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3082)
    • N6
      Carbon, Graphite Composites, CFRP
      (3045)
    • N7
      MMC's
      (2808)
  • S High-Temp Alloys (7875)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7667)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7667)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7673)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7875)
  • H Hardened Materials (3417)
    • H1
      Hardened Materials 44-48 HRC
      (3417)
    • H2
      Hardened Materials 48-55 HRC
      (3120)
    • H3
      Hardened Materials 56-60 HRC
      (1339)
    • H4
      Hardened Materials >60 HRC
      (1339)
  • C CFRP Materials (192)
    • C1
      CFRP, CFRP / CFRP
      (82)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (177)
    • C3
      CFRP / Titanium CFRP / High Temp
      (177)
    • C4
      CFRP / Stainless Steel
      (177)
Select First Choice
  • BR (363)
  • CN (1806)
  • DE (1824)
  • GB (1177)
  • IN (542)
  • SG (721)
  • US (2237)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (249)
  • Blind Hole Finishing Blind Hole Finishing (348)
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (827)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (196)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1190)
  • Counterboring Counterboring (365)
  • Countersinking Countersinking (378)
  • Cross Hole Drilling Cross Hole Drilling (2799)
  • Drilling Drilling (9287)
  • Flat Bottom Drilling Flat Bottom Drilling (202)
  • Grooving Grooving (1)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • ID Thread Turning ID Thread Turning (37)
  • Inclined Entry Drilling Inclined Entry Drilling (1592)
  • Inclined Exit Drilling Inclined Exit Drilling (4157)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Stacked Plates Drilling Stacked Plates Drilling (7120)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (178)
  • Through Hole Finishing Through Hole Finishing (272)
  • X-Offset Drilling X-Offset Drilling (461)
Cutting Diameter
Cutting Diameter
  • 0.157 in (69)
  • 0.177 in (67)
  • 0.197 in (78)
  • 0.201 in (77)
  • 0.217 in (69)
  • 0.237 in (95)
  • 0.25 in (85)
  • 0.256 in (83)
  • 0.268 in (72)
  • 0.276 in (89)
  • 0.295 in (64)
  • 0.313 in (92)
  • 0.315 in (126)
  • 0.319 in (69)
  • 0.323 in (65)
  • 0.328 in (70)
  • 0.335 in (105)
  • 0.339 in (66)
  • 0.343 in (68)
  • 0.345 in (79)
  • 0.347 in (76)
  • 0.354 in (107)
  • 0.358 in (67)
  • 0.359 in (63)
  • 0.374 in (85)
  • 0.375 in (100)
  • 0.386 in (71)
  • 0.391 in (68)
  • 0.394 in (129)
  • 0.402 in (97)
  • 0.406 in (71)
  • 0.408 in (82)
  • 0.41 in (62)
  • 0.414 in (135)
  • 0.422 in (79)
  • 0.425 in (72)
  • 0.433 in (108)
  • 0.437 in (66)
  • 0.438 in (75)
  • 0.441 in (63)
  • 0.453 in (124)
  • 0.465 in (76)
  • 0.47 in (74)
  • 0.473 in (116)
  • 0.484 in (84)
  • 0.492 in (132)
  • 0.496 in (68)
  • 0.5 in (140)
  • 0.504 in (83)
  • 0.512 in (148)
  • 0.516 in (106)
  • 0.52 in (72)
  • 0.531 in (172)
  • 0.539 in (61)
  • 0.543 in (72)
  • 0.547 in (67)
  • 0.551 in (173)
  • 0.555 in (81)
  • 0.559 in (75)
  • 0.564 in (135)
  • 0.572 in (119)
  • 0.576 in (64)
  • 0.578 in (63)
  • 0.583 in (62)
  • 0.591 in (154)
  • 0.594 in (66)
  • 0.602 in (74)
  • 0.61 in (122)
  • 0.618 in (62)
  • 0.622 in (68)
  • 0.625 in (107)
  • 0.63 in (154)
  • 0.634 in (78)
  • 0.638 in (74)
  • 0.641 in (67)
  • 0.65 in (122)
  • 0.656 in (82)
  • 0.669 in (137)
  • 0.689 in (72)
  • 0.69 in (122)
  • 0.698 in (65)
  • 0.704 in (66)
  • 0.709 in (125)
  • 0.728 in (95)
  • 0.748 in (131)
  • 0.75 in (115)
  • 0.756 in (66)
  • 0.766 in (64)
  • 0.768 in (108)
  • 0.781 in (62)
  • 0.787 in (109)
  • 0.807 in (68)
  • 0.828 in (106)
  • 0.866 in (69)
  • 0.875 in (69)
  • 0.906 in (77)
  • 0.946 in (64)
  • 0.984 in (101)
  • 1.0 in (86)
  • 1.024 in (62)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 4.0 mm (69)
  • 4.5 mm (67)
  • 5.0 mm (78)
  • 5.101 mm (77)
  • 5.5 mm (69)
  • 6.0 mm (95)
  • 6.351 mm (85)
  • 6.5 mm (83)
  • 6.801 mm (72)
  • 7.0 mm (89)
  • 7.5 mm (64)
  • 7.95 mm (92)
  • 8.0 mm (126)
  • 8.1 mm (69)
  • 8.201 mm (65)
  • 8.326 mm (70)
  • 8.5 mm (105)
  • 8.6 mm (66)
  • 8.701 mm (68)
  • 8.725 mm (79)
  • 8.8 mm (76)
  • 9.0 mm (107)
  • 9.1 mm (67)
  • 9.125 mm (63)
  • 9.5 mm (85)
  • 9.525 mm (100)
  • 9.8 mm (71)
  • 9.925 mm (68)
  • 10.0 mm (129)
  • 10.201 mm (97)
  • 10.3 mm (71)
  • 10.326 mm (82)
  • 10.4 mm (62)
  • 10.5 mm (135)
  • 10.726 mm (79)
  • 10.8 mm (72)
  • 11.0 mm (108)
  • 11.101 mm (66)
  • 11.125 mm (75)
  • 11.201 mm (63)
  • 11.5 mm (124)
  • 11.8 mm (76)
  • 11.9 mm (74)
  • 12.0 mm (116)
  • 12.3 mm (84)
  • 12.5 mm (132)
  • 12.601 mm (68)
  • 12.701 mm (140)
  • 12.8 mm (83)
  • 13.0 mm (148)
  • 13.101 mm (106)
  • 13.201 mm (72)
  • 13.5 mm (169)
  • 13.701 mm (61)
  • 13.8 mm (72)
  • 13.9 mm (67)
  • 14.0 mm (173)
  • 14.101 mm (81)
  • 14.201 mm (75)
  • 14.3 mm (135)
  • 14.5 mm (119)
  • 14.601 mm (64)
  • 14.675 mm (63)
  • 14.8 mm (62)
  • 15.0 mm (154)
  • 15.076 mm (66)
  • 15.3 mm (74)
  • 15.5 mm (122)
  • 15.601 mm (61)
  • 15.701 mm (62)
  • 15.8 mm (68)
  • 15.875 mm (107)
  • 16.0 mm (154)
  • 16.1 mm (78)
  • 16.2 mm (74)
  • 16.276 mm (67)
  • 16.5 mm (122)
  • 16.675 mm (73)
  • 17.0 mm (137)
  • 17.475 mm (72)
  • 17.5 mm (122)
  • 17.7 mm (65)
  • 17.85 mm (66)
  • 18.0 mm (125)
  • 18.5 mm (95)
  • 19.0 mm (131)
  • 19.05 mm (115)
  • 19.201 mm (66)
  • 19.451 mm (64)
  • 19.5 mm (108)
  • 20.0 mm (109)
  • 20.5 mm (68)
  • 21.0 mm (106)
  • 22.0 mm (69)
  • 22.225 mm (69)
  • 23.0 mm (77)
  • 24.0 mm (64)
  • 25.0 mm (101)
  • 25.401 mm (86)
  • 26.0 mm (62)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (143)
  • Interrupted (251)
  • Lightly Interrupted Cut (173)
  • Smooth Cut (285)
  • Stable (367)
  • Unstable (308)
  • Varying Depth of Cut (181)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (22)
  • 9.0 mm (21)
  • 10.0 mm (26)
  • 11.0 mm (21)
  • 12.0 mm (36)
  • 14.0 mm (171)
  • 16.0 mm (12)
  • 17.0 mm (208)
  • 20.0 mm (272)
  • 21.401 mm (33)
  • 22.0 mm (16)
  • 23.0 mm (160)
  • 24.0 mm (174)
  • 25.0 mm (68)
  • 25.5 mm (12)
  • 25.901 mm (13)
  • 27.0 mm (16)
  • 28.3 mm (16)
  • 28.6 mm (37)
  • 29.0 mm (344)
  • 30.0 mm (58)
  • 32.0 mm (13)
  • 33.0 mm (83)
  • 34.7 mm (12)
  • 34.9 mm (53)
  • 35.0 mm (579)
  • 36.0 mm (33)
  • 38.1 mm (22)
  • 39.0 mm (16)
  • 40.0 mm (298)
  • 40.301 mm (45)
  • 41.0 mm (71)
  • 42.0 mm (23)
  • 43.0 mm (558)
  • 43.5 mm (13)
  • 44.0 mm (30)
  • 45.0 mm (219)
  • 48.0 mm (136)
  • 48.7 mm (45)
  • 49.0 mm (333)
  • 50.0 mm (26)
  • 51.0 mm (142)
  • 53.1 mm (34)
  • 54.0 mm (23)
  • 55.0 mm (106)
  • 55.6 mm (26)
  • 56.0 mm (314)
  • 57.0 mm (93)
  • 58.0 mm (18)
  • 60.0 mm (284)
  • 63.0 mm (213)
  • 63.5 mm (19)
  • 64.0 mm (62)
  • 66.0 mm (21)
  • 68.0 mm (24)
  • 69.0 mm (15)
  • 70.0 mm (27)
  • 71.0 mm (148)
  • 72.0 mm (34)
  • 73.0 mm (14)
  • 75.0 mm (33)
  • 76.0 mm (13)
  • 76.2 mm (25)
  • 77.0 mm (113)
  • 78.0 mm (19)
  • 79.0 mm (13)
  • 80.0 mm (137)
  • 84.0 mm (25)
  • 85.0 mm (20)
  • 88.0 mm (14)
  • 88.9 mm (17)
  • 90.0 mm (38)
  • 95.0 mm (17)
  • 96.0 mm (126)
  • 100.0 mm (40)
  • 101.601 mm (16)
  • 104.0 mm (22)
  • 105.0 mm (18)
  • 108.0 mm (20)
  • 110.0 mm (15)
  • 112.0 mm (82)
  • 116.0 mm (16)
  • 117.0 mm (19)
  • 119.0 mm (13)
  • 120.0 mm (51)
  • 125.0 mm (24)
  • 128.0 mm (68)
  • 130.0 mm (21)
  • 136.0 mm (14)
  • 140.0 mm (42)
  • 144.0 mm (58)
  • 150.0 mm (26)
  • 160.0 mm (57)
  • 165.0 mm (16)
  • 168.0 mm (19)
  • 180.0 mm (18)
  • 200.0 mm (17)
  • 210.0 mm (14)
  • 240.0 mm (17)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.197 in (13)
  • 0.237 in (22)
  • 0.354 in (21)
  • 0.394 in (26)
  • 0.433 in (21)
  • 0.473 in (36)
  • 0.551 in (171)
  • 0.63 in (12)
  • 0.669 in (208)
  • 0.787 in (272)
  • 0.843 in (33)
  • 0.866 in (16)
  • 0.906 in (160)
  • 0.946 in (174)
  • 0.984 in (68)
  • 1.004 in (12)
  • 1.02 in (13)
  • 1.063 in (16)
  • 1.114 in (16)
  • 1.127 in (37)
  • 1.143 in (344)
  • 1.181 in (58)
  • 1.26 in (13)
  • 1.299 in (83)
  • 1.366 in (12)
  • 1.374 in (53)
  • 1.379 in (579)
  • 1.417 in (33)
  • 1.5 in (22)
  • 1.536 in (16)
  • 1.575 in (298)
  • 1.587 in (45)
  • 1.614 in (71)
  • 1.655 in (23)
  • 1.693 in (558)
  • 1.713 in (13)
  • 1.732 in (30)
  • 1.772 in (219)
  • 1.891 in (136)
  • 1.917 in (45)
  • 1.929 in (333)
  • 1.969 in (26)
  • 2.008 in (142)
  • 2.091 in (34)
  • 2.126 in (23)
  • 2.165 in (106)
  • 2.189 in (26)
  • 2.205 in (314)
  • 2.244 in (93)
  • 2.283 in (18)
  • 2.362 in (284)
  • 2.48 in (213)
  • 2.5 in (19)
  • 2.52 in (62)
  • 2.598 in (21)
  • 2.677 in (24)
  • 2.717 in (15)
  • 2.757 in (27)
  • 2.795 in (148)
  • 2.835 in (34)
  • 2.874 in (14)
  • 2.953 in (33)
  • 2.992 in (13)
  • 3.0 in (25)
  • 3.031 in (113)
  • 3.071 in (21)
  • 3.11 in (13)
  • 3.15 in (137)
  • 3.307 in (25)
  • 3.346 in (20)
  • 3.465 in (14)
  • 3.5 in (17)
  • 3.543 in (38)
  • 3.74 in (17)
  • 3.781 in (126)
  • 3.938 in (43)
  • 4.0 in (16)
  • 4.094 in (22)
  • 4.134 in (18)
  • 4.252 in (20)
  • 4.331 in (15)
  • 4.409 in (82)
  • 4.567 in (16)
  • 4.606 in (19)
  • 4.686 in (13)
  • 4.724 in (51)
  • 4.921 in (24)
  • 5.039 in (68)
  • 5.118 in (21)
  • 5.354 in (14)
  • 5.513 in (42)
  • 5.67 in (58)
  • 5.906 in (26)
  • 6.299 in (57)
  • 6.496 in (16)
  • 6.614 in (19)
  • 7.087 in (18)
  • 7.875 in (18)
  • 8.268 in (14)
  • 9.449 in (17)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.276 in (13)
  • 0.354 in (22)
  • 0.473 in (23)
  • 0.63 in (19)
  • 0.669 in (33)
  • 0.709 in (15)
  • 0.787 in (176)
  • 0.866 in (40)
  • 0.946 in (169)
  • 0.984 in (15)
  • 1.063 in (31)
  • 1.102 in (416)
  • 1.143 in (14)
  • 1.181 in (42)
  • 1.299 in (14)
  • 1.339 in (184)
  • 1.379 in (40)
  • 1.417 in (207)
  • 1.496 in (33)
  • 1.575 in (70)
  • 1.614 in (154)
  • 1.655 in (12)
  • 1.666 in (13)
  • 1.693 in (55)
  • 1.732 in (267)
  • 1.772 in (12)
  • 1.811 in (24)
  • 1.85 in (303)
  • 1.929 in (76)
  • 1.969 in (53)
  • 2.008 in (31)
  • 2.047 in (25)
  • 2.087 in (360)
  • 2.126 in (44)
  • 2.165 in (283)
  • 2.205 in (114)
  • 2.244 in (20)
  • 2.283 in (12)
  • 2.323 in (18)
  • 2.362 in (257)
  • 2.402 in (339)
  • 2.441 in (12)
  • 2.48 in (22)
  • 2.52 in (14)
  • 2.559 in (190)
  • 2.598 in (44)
  • 2.638 in (97)
  • 2.677 in (26)
  • 2.717 in (13)
  • 2.757 in (39)
  • 2.795 in (293)
  • 2.835 in (14)
  • 2.874 in (139)
  • 2.914 in (61)
  • 2.953 in (13)
  • 2.992 in (30)
  • 3.031 in (222)
  • 3.11 in (109)
  • 3.15 in (14)
  • 3.228 in (31)
  • 3.269 in (219)
  • 3.307 in (13)
  • 3.346 in (23)
  • 3.386 in (25)
  • 3.426 in (20)
  • 3.622 in (118)
  • 3.661 in (145)
  • 3.701 in (17)
  • 3.819 in (23)
  • 3.858 in (15)
  • 3.898 in (15)
  • 3.938 in (21)
  • 3.976 in (125)
  • 4.016 in (13)
  • 4.094 in (14)
  • 4.291 in (13)
  • 4.331 in (109)
  • 4.37 in (16)
  • 4.409 in (17)
  • 4.488 in (14)
  • 4.529 in (15)
  • 4.606 in (32)
  • 4.686 in (17)
  • 4.764 in (15)
  • 4.921 in (13)
  • 5.039 in (66