欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

深孔钻削（高达 10Xd）•HTS 系统

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (268)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (268)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (268)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (268)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (268)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (268)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (268)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (268)
  • M 不锈钢 (263)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (263)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (263)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (263)
  • K 铸铁 (285)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (285)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (285)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (285)
  • N 非铁金属材料 (226)
    • N1
      铝型材 (226)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (226)
    • N3
      高硅铝合金 硅 > 12.2% (226)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (226)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (226)
    • N6
      碳、石墨复合材料、CFRP (226)
    • N7
      MMC (226)
  • S 高温合金 (253)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (253)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (253)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (253)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (253)
  • H 淬火材料 (108)
    • H1
      淬火材料 44-48 HRC (108)
    • H2
      淬火材料 48-55 HRC (108)
    • H3
      淬火材料 56-60 HRC (108)
    • H4
      淬火材料 >60 HRC (108)
选择 First Choice
  • BR (21)
  • CN (69)
  • DE (69)
  • GB (53)
  • IN (29)
  • SG (52)
  • US (69)
应用
应用
  • Convex Drilling Convex Drilling (1)
  • Drilling Drilling (61)
切削直径
切削直径
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.315 in (7)
  • 0.394 in (7)
  • 0.591 in (3)
  • 0.787 in (3)
  • 0.984 in (3)
  • 1.181 in (3)
  • 1.575 in (1)
  • 1.693 in (1)
  • 1.772 in (1)
  • 1.811 in (1)
  • 1.929 in (1)
  • 1.969 in (1)
  • 2.047 in (1)
  • 2.165 in (1)
  • 2.283 in (1)
  • 2.48 in (2)
  • 2.677 in (1)
  • 2.874 in (1)
  • 3.071 in (2)
  • 3.307 in (1)
  • 3.543 in (1)
  • 3.781 in (2)
  • 4.016 in (1)
  • 4.252 in (1)
  • 4.529 in (1)
  • 4.803 in (1)
  • 5.118 in (1)
  • 5.513 in (1)
  • 5.906 in (1)
  • 6.22 in (1)
  • 6.378 in (1)
  • 7.087 in (1)
  • 7.678 in (1)
  • 8.387 in (1)
  • 9.055 in (1)
  • 10.236 in (1)
切削直径 Min 到 切削直径 Max
切削直径
切削直径
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 15.0 mm (3)
  • 20.0 mm (3)
  • 25.0 mm (3)
  • 30.0 mm (3)
  • 40.0 mm (1)
  • 43.0 mm (1)
  • 45.0 mm (1)
  • 46.0 mm (1)
  • 49.0 mm (1)
  • 50.0 mm (1)
  • 52.0 mm (1)
  • 55.0 mm (1)
  • 58.0 mm (1)
  • 63.0 mm (2)
  • 68.0 mm (1)
  • 73.0 mm (1)
  • 78.0 mm (2)
  • 84.0 mm (1)
  • 90.0 mm (1)
  • 96.0 mm (2)
  • 102.0 mm (1)
  • 108.0 mm (1)
  • 115.0 mm (1)
  • 122.0 mm (1)
  • 130.0 mm (1)
  • 140.0 mm (1)
  • 150.0 mm (1)
  • 158.0 mm (1)
  • 162.0 mm (1)
  • 180.0 mm (1)
  • 195.0 mm (1)
  • 213.0 mm (1)
  • 230.0 mm (1)
  • 260.0 mm (1)
切削直径 Min 到 切削直径 Max
切削条件
切削条件
  • Interrupted (93)
  • Stable (167)
  • Unstable (127)
最大孔深
最大孔深
  • 8.0 mm (2)
  • 9.601 mm (1)
  • 10.0 mm (2)
  • 11.3 mm (1)
  • 430.0 mm (1)
  • 460.0 mm (1)
  • 490.0 mm (1)
  • 500.0 mm (1)
  • 520.0 mm (1)
  • 550.0 mm (2)
  • 580.0 mm (1)
  • 630.0 mm (1)
  • 680.0 mm (2)
  • 750.0 mm (7)
  • 780.0 mm (3)
  • 1000.0 mm (5)
  • 1060.0 mm (3)
  • 1360.0 mm (4)
最大孔深 Min 到 最大孔深 Max
最大孔深
最大孔深
  • 0.315 in (2)
  • 0.378 in (1)
  • 0.394 in (2)
  • 0.445 in (1)
  • 16.93 in (1)
  • 18.11 in (1)
  • 19.291 in (1)
  • 19.685 in (1)
  • 20.472 in (1)
  • 21.654 in (2)
  • 22.835 in (1)
  • 24.803 in (1)
  • 26.773 in (2)
  • 29.529 in (7)
  • 30.709 in (3)
  • 39.37 in (5)
  • 41.732 in (3)
  • 53.543 in (4)
最大孔深 Min 到 最大孔深 Max
范围
范围
  • 0.37 in (1)
  • 0.378 in (1)
  • 0.4 in (2)
  • 0.445 in (2)
  • 0.473 in (2)
  • 0.681 in (1)
  • 0.906 in (1)
  • 1.143 in (1)
  • 1.417 in (1)
范围 Min 到 范围 Max
范围
范围
  • 9.4 mm (1)
  • 9.601 mm (1)
  • 10.15 mm (2)
  • 11.3 mm (2)
  • 12.0 mm (2)
  • 17.3 mm (1)
  • 23.0 mm (1)
  • 29.0 mm (1)
  • 36.0 mm (1)
范围 Min 到 范围 Max
刀具切削刃角度
刀具切削刃角度
  • -8888.0 (33)
刀具切削刃角度 Min 到 刀具切削刃角度 Max
连接类型
连接类型
  • HTS (33)
  • HTS Pilot Drill Shank (18)
  • HTS-C Pilot Drill Shank (4)
  • HTS-R Pilot Drill Shank (6)
排屑槽数量
排屑槽数量
  • 2 (61)
每个刀片的切削刃
每个刀片的切削刃
  • 2.0 (76)
  • 4.0 (113)
每个刀片的切削刃 Min 到 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 1.079 in (1)
  • 1.201 in (1)
  • 1.457 in (1)
  • 1.496 in (1)
  • 1.752 in (5)
  • 2.008 in (1)
  • 2.146 in (4)
  • 2.265 in (1)
  • 2.717 in (1)
  • 3.346 in (2)
  • 3.74 in (1)
  • 3.938 in (3)
  • 4.134 in (4)
  • 4.529 in (4)
  • 4.724 in (4)
  • 5.118 in (3)
  • 5.71 in (3)
  • 6.299 in (4)
  • 7.283 in (2)
  • 7.875 in (1)
  • 9.055 in (2)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 27.401 mm (1)
  • 30.5 mm (1)
  • 37.0 mm (1)
  • 38.0 mm (1)
  • 44.5 mm (5)
  • 51.0 mm (1)
  • 54.5 mm (4)
  • 57.5 mm (1)
  • 69.0 mm (1)
  • 85.0 mm (2)
  • 95.0 mm (1)
  • 100.0 mm (3)
  • 105.0 mm (4)
  • 115.0 mm (4)
  • 120.0 mm (4)
  • 130.0 mm (3)
  • 145.0 mm (3)
  • 160.0 mm (4)
  • 185.0 mm (2)
  • 200.0 mm (1)
  • 230.0 mm (2)
总长 [L] Min 到 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.008 in (7)
  • 0.012 in (5)
  • 0.016 in (132)
  • 0.024 in (8)
  • 0.031 in (126)
  • 0.039 in (52)
  • 0.047 in (72)
  • 0.063 in (45)
  • 0.079 in (22)
刀尖半径 Min 到 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.2 mm (7)
  • 0.301 mm (5)
  • 0.4 mm (132)
  • 0.601 mm (8)
  • 0.8 mm (126)
  • 1.0 mm (52)
  • 1.201 mm (72)
  • 1.6 mm (45)
  • 2.0 mm (22)
刀尖半径 Min 到 刀尖半径 Max
刀尖倒角
刀尖倒角
  • 0.0 mm (242)
刀尖倒角 Min 到 刀尖倒角 Max
刀尖倒角
刀尖倒角
  • 0.0 in (242)
刀尖倒角 Min 到 刀尖倒角 Max
application
涂层
涂层
  • TiN (16)
  • Uncoated (4)
切削刀具材质
切削刀具材质
  • A30 (8)
  • AS3 (12)
  • CD4 (44)
  • CM4 (35)
  • CS5 (72)
  • K6 (10)
  • KC7020 (15)
  • KC7025 (15)
  • KC7140 (106)
  • KC720 (75)
  • KC7210 (35)
  • KC7215 (103)
  • KC7225 (86)
  • KC7315 (6)
  • KC7325 (2)
  • KC7815 (86)
  • KC7820 (76)
  • KC7845 (10)
  • KC7935 (71)
  • KC810 (71)
  • KC990 (71)
  • KCMS35 (94)
  • KCPK10 (111)
  • KCU25 (132)
  • KCU40 (133)
  • KD1425 (80)
  • KM1 (50)
  • KMF (71)
  • KU40D (71)
刀具手式
刀具手式
  • R (61)
修光刃刀片
修光刃刀片
  • N (189)
钻孔类型
钻孔类型
  • 81-06 (28)
  • 86-01 (33)
frontEnd
刀片形状
刀片形状
  • B-PARALLELOGRAM 82 (10)
  • S-SQUARE 90 (233)
  • W-TRIGON 80 (27)
  • X-TRIGON 84 (44)
量规长度
量规长度
  • 2.394 in (1)
  • 2.972 in (2)
  • 3.346 in (2)
  • 3.426 in (3)
  • 3.543 in (2)
  • 3.551 in (1)
  • 3.622 in (2)
  • 3.697 in (1)
  • 3.701 in (4)
  • 3.781 in (2)
  • 3.898 in (1)
  • 3.938 in (2)
  • 4.173 in (1)
  • 4.331 in (2)
  • 4.409 in (2)
  • 4.484 in (1)
  • 4.921 in (2)
  • 5.315 in (1)
  • 5.5 in (2)
  • 6.299 in (3)
  • 6.453 in (1)
  • 6.644 in (1)
  • 6.891 in (1)
  • 7.144 in (1)
  • 7.875 in (2)
  • 8.051 in (1)
  • 8.268 in (4)
  • 8.346 in (2)
  • 8.661 in (1)
  • 9.222 in (1)
  • 10.551 in (1)
  • 11.144 in (2)
  • 11.222 in (1)
  • 12.144 in (1)
  • 12.205 in (2)
  • 12.283 in (2)
  • 12.362 in (3)
  • 12.441 in (1)
  • 13.051 in (1)
  • 13.13 in (1)
  • 14.173 in (1)
  • 15.551 in (1)
  • 15.722 in (1)
  • 17.645 in (2)
  • 18.052 in (1)
  • 18.11 in (2)
  • 18.189 in (2)
  • 18.268 in (1)
  • 19.222 in (1)
  • 19.645 in (1)
  • 20.079 in (1)
  • 20.236 in (1)
  • 20.315 in (1)
  • 21.13 in (1)
  • 24.094 in (2)
  • 24.174 in (1)
  • 25.722 in (1)
  • 31.13 in (1)
量规长度
量规长度
  • 210 mm (4)
  • 94 mm (4)
  • 160 mm (3)
  • 314 mm (3)
  • 87 mm (3)
  • 100 mm (2)
  • 110 mm (2)
  • 112 mm (2)
  • 125 mm (2)
  • 200 mm (2)
  • 212 mm (2)
  • 310 mm (2)
  • 312 mm (2)
  • 460 mm (2)
  • 462 mm (2)
  • 612 mm (2)
  • 85 mm (2)
  • 90 mm (2)
  • 92 mm (2)
  • 96 mm (2)
  • 106 mm (1)
  • 135 mm (1)
  • 175 mm (1)
  • 220 mm (1)
  • 268 mm (1)
  • 316 mm (1)
  • 360 mm (1)
  • 395 mm (1)
  • 464 mm (1)
  • 510 mm (1)
  • 514 mm (1)
  • 516 mm (1)
  • 614 mm (1)
  • 99 mm (1)
  • 60.801 mm (1)
  • 75.5 mm (2)
  • 90.2 mm (1)
  • 93.9 mm (1)
  • 113.9 mm (1)
  • 139.701 mm (2)
  • 163.9 mm (1)
  • 168.75 mm (1)
  • 181.451 mm (1)
  • 204.5 mm (1)
  • 234.25 mm (1)
  • 283.05 mm (2)
  • 285.05 mm (1)
  • 308.451 mm (1)
  • 331.5 mm (1)
  • 333.5 mm (1)
  • 399.35 mm (1)
  • 448.151 mm (2)
  • 458.5 mm (1)
  • 488.25 mm (1)
  • 498.951 mm (1)
  • 536.7 mm (1)
  • 653.35 mm (1)
  • 790.7 mm (1)
钻尖角度
钻尖角度
  • 118.0 (54)
  • 130.0 (2)
钻尖角度 Min 到 钻尖角度 Max
insertGeometry
形状
形状
  • S-SQUARE 90 (189)
刀片 IC 尺寸
刀片 IC 尺寸
  • 5.551 mm (6)
  • 6.351 mm (27)
  • 7.75 mm (1)
  • 7.926 mm (16)
  • 7.95 mm (24)
  • 9.525 mm (44)
  • 12.701 mm (42)
  • 15.726 mm (20)
  • 15.875 mm (9)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
刀片 IC 尺寸
刀片 IC 尺寸
  • 0.219 in (6)
  • 0.25 in (27)
  • 0.305 in (1)
  • 0.312 in (16)
  • 0.313 in (24)
  • 0.375 in (44)
  • 0.5 in (42)
  • 0.619 in (20)
  • 0.625 in (9)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
切削刃长度
切削刃长度
  • 5.426 mm (6)
  • 6.2 mm (10)
  • 6.351 mm (17)
  • 7.75 mm (1)
  • 7.801 mm (15)
  • 7.926 mm (25)
  • 9.375 mm (20)
  • 9.525 mm (24)
  • 12.55 mm (14)
  • 12.701 mm (37)
  • 15.726 mm (20)
切削刃长度 Min 到 切削刃长度 Max
切削刃长度
切削刃长度
  • 0.214 in (6)
  • 0.244 in (10)
  • 0.25 in (17)
  • 0.305 in (1)
  • 0.307 in (15)
  • 0.312 in (25)
  • 0.369 in (20)
  • 0.375 in (24)
  • 0.494 in (14)
  • 0.5 in (37)
  • 0.619 in (20)
切削刃长度 Min 到 切削刃长度 Max
断屑槽 CBMD
断屑槽 CBMD
  • 20 (33)
  • 21 (30)
  • 22 (4)
  • 31 (12)
  • FP (27)
  • HP (34)
  • MD (37)
  • MDT (3)
切削刀具材料
切削刀具材料
  • D P (49)
  • H W (242)
公差等级
公差等级
  • G (51)
  • H (12)
  • P (60)
backEnd
连接类型
连接类型
  • CYLINDRICAL (28)
  • HTS SHANK (33)
系统规格
系统规格
  • BT50 (4)
  • CV50 (7)
  • DV50 (2)
  • HSK100A (2)
后端直径
后端直径
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 13.0 mm (9)
  • 15.0 mm (3)
  • 16.0 mm (5)
  • 20.0 mm (3)
  • 22.0 mm (6)
  • 25.0 mm (3)
  • 27.0 mm (6)
  • 30.0 mm (3)
  • 32.0 mm (13)
  • 38.1 mm (2)
  • 40.0 mm (10)
  • 50.0 mm (37)
  • 50.801 mm (19)
  • 60.0 mm (3)
  • 63.5 mm (3)
  • 69.851 mm (13)
  • 76.2 mm (3)
  • 80.0 mm (2)
  • 100.0 mm (2)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.315 in (7)
  • 0.394 in (7)
  • 0.512 in (9)
  • 0.591 in (3)
  • 0.63 in (5)
  • 0.787 in (3)
  • 0.866 in (6)
  • 0.984 in (3)
  • 1.063 in (6)
  • 1.181 in (3)
  • 1.26 in (13)
  • 1.5 in (2)
  • 1.575 in (10)
  • 1.969 in (37)
  • 2.0 in (19)
  • 2.362 in (3)
  • 2.5 in (3)
  • 2.75 in (13)
  • 3.0 in (3)
  • 3.15 in (2)
  • 3.938 in (2)
后端直径 Min 到 后端直径 Max
No filters matching ""

HTS-C 系统

(193) HTS-C 系统

HTS • 组件

(100) HTS • 组件

HTS 系统 • 带有 DFT 刀片的可调式刀头

(89) HTS 系统 • 带有 DFT 刀片的可调式刀头

HTS-R 系统 • 带有 DFR 刀片的可调式刀头

(21) HTS-R 系统 • 带有 DFR 刀片的可调式刀头
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?