Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

可转位钻

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (1767)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1755)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1761)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1761)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1761)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1761)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1743)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1743)
  • M Stainless Steel (1721)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1721)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1721)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1709)
  • K Cast Iron (1764)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1764)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1764)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1764)
  • N Non-Ferrous Materials (1657)
    • N1
      Wrought Aluminum
      (1652)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1652)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1652)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1641)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1646)
    • N6
      Carbon, Graphite Composites, CFRP
      (1634)
    • N7
      MMC's
      (1616)
  • S High-Temp Alloys (1672)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1666)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1666)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1672)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1672)
  • H Hardened Materials (984)
    • H1
      Hardened Materials 44-48 HRC
      (984)
    • H2
      Hardened Materials 48-55 HRC
      (984)
    • H3
      Hardened Materials 56-60 HRC
      (984)
    • H4
      Hardened Materials >60 HRC
      (984)
Select First Choice
  • CN (279)
  • DE (279)
  • GB (57)
  • IN (63)
  • US (273)
Applications
  • Convex Drilling Convex Drilling (607)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (689)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (689)
  • Counterboring Counterboring (689)
  • Countersinking Countersinking (689)
  • Drilling Drilling (1199)
  • Flat Bottom Drilling Flat Bottom Drilling (703)
  • ID Thread Turning ID Thread Turning (529)
  • Inclined Entry Drilling Inclined Entry Drilling (607)
  • Inclined Exit Drilling Inclined Exit Drilling (607)
  • Pre-Condition Pre-Condition (1233)
  • Stacked Plates Drilling Stacked Plates Drilling (607)
  • X-Offset Drilling X-Offset Drilling (693)
Cutting Diameter
  • 4.0 (4)
  • 5.0 (4)
  • 6.0 (3)
  • 8.0 (10)
  • 10.0 (12)
  • 12.5 (11)
  • 12.7 (13)
  • 13.0 (12)
  • 13.487 (8)
  • 13.5 (6)
  • 14.0 (20)
  • 14.3 (10)
  • 14.5 (14)
  • 15.0 (22)
  • 15.088 (10)
  • 15.5 (14)
  • 15.875 (15)
  • 16.0 (22)
  • 16.5 (14)
  • 16.662 (14)
  • 17.0 (20)
  • 17.462 (2)
  • 17.475 (13)
  • 17.5 (12)
  • 17.844 (2)
  • 17.856 (6)
  • 18.0 (20)
  • 18.5 (12)
  • 18.644 (14)
  • 19.0 (20)
  • 19.05 (17)
  • 19.5 (12)
  • 19.837 (13)
  • 19.845 (2)
  • 20.0 (23)
  • 20.5 (8)
  • 20.638 (2)
  • 20.65 (15)
  • 20.9 (4)
  • 21.0 (21)
  • 21.438 (15)
  • 21.5 (4)
  • 22.0 (20)
  • 22.225 (17)
  • 22.5 (4)
  • 23.0 (21)
  • 23.012 (15)
  • 23.5 (4)
  • 23.812 (2)
  • 23.825 (14)
  • 23.9 (4)
  • 24.0 (20)
  • 24.5 (4)
  • 24.613 (15)
  • 24.994 (6)
  • 25.0 (22)
  • 25.004 (3)
  • 25.4 (31)
  • 25.5 (4)
  • 26.0 (14)
  • 26.187 (5)
  • 26.195 (1)
  • 26.4 (4)
  • 26.5 (8)
  • 26.988 (1)
  • 27.0 (25)
  • 27.788 (6)
  • 28.0 (14)
  • 28.575 (15)
  • 29.0 (20)
  • 29.362 (6)
  • 29.4 (4)
  • 30.0 (17)
  • 30.162 (1)
  • 30.175 (5)
  • 30.958 (2)
  • 30.963 (5)
  • 31.0 (20)
  • 31.75 (18)
  • 32.0 (13)
  • 32.537 (2)
  • 32.545 (2)
  • 33.0 (16)
  • 33.338 (2)
  • 33.35 (13)
  • 34.0 (12)
  • 34.925 (17)
  • 35.0 (16)
  • 35.712 (4)
  • 36.0 (12)
  • 36.512 (2)
  • 36.525 (11)
  • 37.0 (12)
  • 37.308 (2)
  • 37.313 (3)
  • 37.5 (4)
  • 38.0 (16)
  • 38.1 (18)
  • 38.887 (4)
  • 39.0 (11)
  • 39.688 (2)
  • 39.7 (13)
  • 40.0 (12)
  • 41.0 (10)
  • 41.275 (12)
  • 42.0 (7)
  • 42.062 (4)
  • 42.862 (2)
  • 42.875 (7)
  • 43.0 (8)
  • 44.0 (10)
  • 44.45 (9)
  • 45.0 (8)
  • 46.0 (8)
  • 46.038 (1)
  • 46.05 (5)
  • 47.0 (10)
  • 47.625 (8)
  • 48.0 (7)
  • 49.0 (7)
  • 49.212 (1)
  • 49.225 (5)
  • 50.0 (7)
  • 50.5 (2)
  • 50.8 (12)
  • 51.0 (6)
  • 52.0 (7)
  • 53.0 (6)
  • 53.975 (12)
  • 54.0 (6)
  • 54.999 (3)
  • 55.0 (3)
  • 56.0 (1)
  • 57.0 (1)
  • 57.15 (1)
  • 58.0 (2)
  • 59.0 (1)
  • 60.0 (1)
  • 60.325 (1)
  • 61.0 (1)
  • 62.0 (1)
  • 63.0 (3)
  • 63.5 (1)
  • 64.0 (1)
  • 65.0 (1)
  • 66.0 (1)
  • 67.0 (1)
  • 68.0 (2)
  • 69.0 (1)
  • 69.85 (1)
  • 70.0 (1)
  • 71.0 (1)
  • 72.0 (1)
  • 73.0 (2)
  • 74.0 (1)
  • 75.0 (1)
  • 76.0 (1)
  • 76.2 (1)
  • 77.0 (1)
  • 78.0 (3)
  • 79.0 (1)
  • 80.0 (1)
  • 81.0 (1)
  • 82.0 (1)
  • 82.55 (1)
  • 84.0 (1)
  • 90.0 (1)
  • 96.0 (2)
  • 102.0 (1)
  • 108.0 (1)
  • 115.0 (1)
  • 122.0 (1)
  • 130.0 (1)
  • 140.0 (1)
  • 150.0 (1)
  • 158.0 (1)
  • 162.0 (1)
  • 180.0 (1)
  • 195.0 (1)
  • 213.0 (1)
  • 230.0 (1)
  • 260.0 (1)
to
Cutting Diameter
  • 0.1575 (4)
  • 0.1969 (4)
  • 0.2362 (3)
  • 0.315 (10)
  • 0.3937 (12)
  • 0.492 (3)
  • 0.4921 (8)
  • 0.5 (13)
  • 0.5118 (9)
  • 0.512 (3)
  • 0.531 (11)
  • 0.5315 (3)
  • 0.55 (2)
  • 0.551 (9)
  • 0.5512 (9)
  • 0.5625 (2)
  • 0.563 (8)
  • 0.57 (2)
  • 0.5709 (3)
  • 0.571 (9)
  • 0.59 (2)
  • 0.5906 (11)
  • 0.591 (9)
  • 0.5938 (2)
  • 0.594 (8)
  • 0.61 (11)
  • 0.6102 (3)
  • 0.625 (15)
  • 0.6299 (11)
  • 0.63 (11)
  • 0.6496 (3)
  • 0.65 (11)
  • 0.656 (12)
  • 0.6563 (2)
  • 0.669 (9)
  • 0.6693 (9)
  • 0.67 (2)
  • 0.6875 (4)
  • 0.688 (11)
  • 0.689 (9)
  • 0.69 (3)
  • 0.7025 (2)
  • 0.703 (4)
  • 0.7031 (2)
  • 0.7087 (12)
  • 0.709 (5)
  • 0.71 (3)
  • 0.728 (5)
  • 0.7283 (4)
  • 0.73 (3)
  • 0.734 (12)
  • 0.7344 (2)
  • 0.748 (17)
  • 0.75 (20)
  • 0.7677 (4)
  • 0.768 (5)
  • 0.77 (3)
  • 0.781 (10)
  • 0.7813 (5)
  • 0.787 (4)
  • 0.7874 (16)
  • 0.79 (3)
  • 0.807 (4)
  • 0.8071 (4)
  • 0.8125 (6)
  • 0.813 (11)
  • 0.823 (4)
  • 0.8268 (13)
  • 0.827 (5)
  • 0.83 (3)
  • 0.8438 (4)
  • 0.844 (11)
  • 0.846 (4)
  • 0.866 (5)
  • 0.8661 (13)
  • 0.87 (2)
  • 0.875 (17)
  • 0.8858 (1)
  • 0.886 (3)
  • 0.9055 (14)
  • 0.906 (16)
  • 0.9063 (3)
  • 0.91 (3)
  • 0.925 (4)
  • 0.9375 (6)
  • 0.938 (10)
  • 0.941 (4)
  • 0.9449 (17)
  • 0.945 (3)
  • 0.965 (4)
  • 0.9688 (4)
  • 0.969 (11)
  • 0.984 (6)
  • 0.9843 (18)
  • 0.9844 (7)
  • 1.0 (31)
  • 1.004 (4)
  • 1.0236 (10)
  • 1.024 (4)
  • 1.031 (5)
  • 1.0313 (1)
  • 1.039 (4)
  • 1.043 (4)
  • 1.0433 (4)
  • 1.0625 (1)
  • 1.063 (25)
  • 1.094 (6)
  • 1.102 (4)
  • 1.1024 (10)
  • 1.125 (15)
  • 1.1417 (16)
  • 1.142 (4)
  • 1.156 (6)
  • 1.157 (4)
  • 1.181 (4)
  • 1.1811 (13)
  • 1.1875 (1)
  • 1.188 (5)
  • 1.2188 (2)
  • 1.219 (5)
  • 1.22 (4)
  • 1.2205 (16)
  • 1.25 (18)
  • 1.2598 (9)
  • 1.26 (4)
  • 1.281 (2)
  • 1.2813 (2)
  • 1.299 (4)
  • 1.2992 (12)
  • 1.3125 (2)
  • 1.313 (13)
  • 1.3386 (8)
  • 1.339 (4)
  • 1.375 (17)
  • 1.378 (16)
  • 1.406 (4)
  • 1.417 (4)
  • 1.4173 (8)
  • 1.4375 (2)
  • 1.438 (11)
  • 1.4567 (8)
  • 1.457 (4)
  • 1.4688 (2)
  • 1.469 (3)
  • 1.4764 (4)
  • 1.496 (4)
  • 1.4961 (12)
  • 1.5 (18)
  • 1.531 (4)
  • 1.535 (4)
  • 1.5354 (7)
  • 1.5625 (2)
  • 1.563 (13)
  • 1.5748 (8)
  • 1.575 (4)
  • 1.6142 (10)
  • 1.625 (12)
  • 1.6535 (7)
  • 1.656 (4)
  • 1.6875 (2)
  • 1.688 (7)
  • 1.6929 (8)
  • 1.7323 (10)
  • 1.75 (9)
  • 1.77 (1)
  • 1.7717 (7)
  • 1.811 (8)
  • 1.8125 (1)
  • 1.813 (5)
  • 1.8504 (10)
  • 1.875 (8)
  • 1.8898 (7)
  • 1.9291 (7)
  • 1.9375 (1)
  • 1.938 (5)
  • 1.9685 (6)
  • 1.97 (1)
  • 1.9882 (2)
  • 2.0 (12)
  • 2.0079 (6)
  • 2.0472 (7)
  • 2.0866 (6)
  • 2.125 (12)
  • 2.126 (6)
  • 2.1653 (3)
  • 2.1654 (2)
  • 2.17 (1)
  • 2.2047 (1)
  • 2.2441 (1)
  • 2.25 (1)
  • 2.28 (1)
  • 2.2835 (1)
  • 2.3228 (1)
  • 2.3622 (1)
  • 2.375 (1)
  • 2.4016 (1)
  • 2.4409 (1)
  • 2.48 (2)
  • 2.4803 (1)
  • 2.5 (1)
  • 2.5197 (1)
  • 2.5591 (1)
  • 2.5984 (1)
  • 2.6378 (1)
  • 2.6772 (1)
  • 2.68 (1)
  • 2.7165 (1)
  • 2.75 (1)
  • 2.7559 (1)
  • 2.7953 (1)
  • 2.8346 (1)
  • 2.87 (1)
  • 2.874 (1)
  • 2.9134 (1)
  • 2.9528 (1)
  • 2.9921 (1)
  • 3.0 (1)
  • 3.0315 (1)
  • 3.07 (2)
  • 3.0709 (1)
  • 3.1102 (1)
  • 3.1496 (1)
  • 3.189 (1)
  • 3.2283 (1)
  • 3.25 (1)
  • 3.31 (1)
  • 3.54 (1)
  • 3.78 (2)
  • 4.02 (1)
  • 4.25 (1)
  • 4.53 (1)
  • 4.8 (1)
  • 5.12 (1)
  • 5.51 (1)
  • 5.91 (1)
  • 6.22 (1)
  • 6.38 (1)
  • 7.09 (1)
  • 7.68 (1)
  • 8.39 (1)
  • 9.06 (1)
  • 10.24 (1)
to
Cutting Condition
  • Interrupted (190)
  • Stable (317)
  • Unstable (271)
Maximum Hole Depth [L4]
  • 0.315 (2)
  • 0.378 (2)
  • 0.3937 (2)
  • 0.4449 (2)
  • 0.709 (1)
  • 0.984 (2)
  • 0.9843 (1)
  • 1.0 (2)
  • 1.0236 (1)
  • 1.024 (1)
  • 1.063 (2)
  • 1.102 (2)
  • 1.1024 (2)
  • 1.126 (2)
  • 1.1417 (1)
  • 1.142 (3)
  • 1.181 (3)
  • 1.1811 (1)
  • 1.188 (1)
  • 1.22 (3)
  • 1.2205 (1)
  • 1.25 (2)
  • 1.2598 (1)
  • 1.26 (3)
  • 1.299 (3)
  • 1.2992 (1)
  • 1.312 (1)
  • 1.3386 (1)
  • 1.339 (3)
  • 1.376 (2)
  • 1.378 (3)
  • 1.406 (1)
  • 1.417 (2)
  • 1.4173 (1)
  • 1.4567 (1)
  • 1.457 (2)
  • 1.468 (1)
  • 1.476 (1)
  • 1.4764 (6)
  • 1.496 (2)
  • 1.4961 (1)
  • 1.5 (8)
  • 1.5118 (6)
  • 1.535 (3)
  • 1.5354 (8)
  • 1.562 (1)
  • 1.5748 (1)
  • 1.575 (2)
  • 1.593 (7)
  • 1.594 (1)
  • 1.5945 (1)
  • 1.6 (2)
  • 1.614 (1)
  • 1.6142 (1)
  • 1.626 (2)
  • 1.64 (2)
  • 1.646 (1)
  • 1.6535 (8)
  • 1.654 (5)
  • 1.6772 (1)
  • 1.688 (1)
  • 1.689 (7)
  • 1.693 (1)
  • 1.7126 (1)
  • 1.713 (3)
  • 1.732 (2)
  • 1.7323 (1)
  • 1.75 (4)
  • 1.76 (2)
  • 1.7717 (6)
  • 1.772 (4)
  • 1.782 (8)
  • 1.811 (3)
  • 1.812 (1)
  • 1.8307 (1)
  • 1.831 (3)
  • 1.835 (2)
  • 1.85 (1)
  • 1.875 (10)
  • 1.876 (2)
  • 1.882 (1)
  • 1.8898 (9)
  • 1.89 (4)
  • 1.9094 (3)
  • 1.9173 (3)
  • 1.9252 (6)
  • 1.929 (1)
  • 1.9291 (3)
  • 1.938 (1)
  • 1.9488 (1)
  • 1.949 (3)
  • 1.96 (2)
  • 1.968 (10)
  • 1.9685 (2)
  • 1.969 (2)
  • 2.0 (7)
  • 2.0079 (5)
  • 2.008 (4)
  • 2.03 (2)
  • 2.047 (2)
  • 2.0472 (2)
  • 2.062 (1)
  • 2.064 (9)
  • 2.0669 (2)
  • 2.067 (2)
  • 2.079 (1)
  • 2.0866 (1)
  • 2.087 (1)
  • 2.109 (3)
  • 2.11 (1)
  • 2.124 (1)
  • 2.125 (1)
  • 2.126 (14)
  • 2.185 (4)
  • 2.1875 (3)
  • 2.188 (1)
  • 2.202 (9)
  • 2.2047 (2)
  • 2.205 (4)
  • 2.244 (2)
  • 2.2441 (7)
  • 2.25 (9)
  • 2.252 (1)
  • 2.265 (2)
  • 2.283 (4)
  • 2.2835 (2)
  • 2.303 (2)
  • 2.3031 (2)
  • 2.312 (1)
  • 2.315 (1)
  • 2.3189 (2)
  • 2.3268 (4)
  • 2.343 (9)
  • 2.35 (2)
  • 2.362 (6)
  • 2.3622 (9)
  • 2.376 (2)
  • 2.4 (2)
  • 2.421 (1)
  • 2.4213 (2)
  • 2.438 (1)
  • 2.439 (9)
  • 2.4409 (2)
  • 2.441 (4)
  • 2.469 (1)
  • 2.48 (2)
  • 2.4803 (8)
  • 2.5 (9)
  • 2.5197 (2)
  • 2.52 (5)
  • 2.532 (9)
  • 2.539 (1)
  • 2.598 (6)
  • 2.5984 (8)
  • 2.6 (1)
  • 2.6024 (2)
  • 2.6102 (4)
  • 2.6132 (1)
  • 2.624 (1)
  • 2.625 (7)
  • 2.626 (2)
  • 2.65 (1)
  • 2.657 (1)
  • 2.677 (4)
  • 2.6772 (2)
  • 2.7 (1)
  • 2.7165 (8)
  • 2.717 (2)
  • 2.718 (8)
  • 2.75 (3)
  • 2.752 (1)
  • 2.7559 (2)
  • 2.756 (5)
  • 2.776 (1)
  • 2.812 (2)
  • 2.814 (8)
  • 2.823 (1)
  • 2.8346 (11)
  • 2.835 (4)
  • 2.85 (1)
  • 2.854 (2)
  • 2.876 (1)
  • 2.89 (1)
  • 2.894 (1)
  • 2.8952 (1)
  • 2.907 (7)
  • 2.913 (3)
  • 2.9134 (2)
  • 2.936 (1)
  • 2.938 (2)
  • 2.952 (2)
  • 2.9528 (9)
  • 2.953 (3)
  • 2.992 (3)
  • 2.9921 (2)
  • 3.0 (21)
  • 3.0079 (6)
  • 3.0118 (4)
  • 3.012 (1)
  • 3.0157 (2)
  • 3.0236 (2)
  • 3.05 (2)
  • 3.051 (2)
  • 3.0709 (5)
  • 3.071 (4)
  • 3.093 (1)
  • 3.118 (1)
  • 3.124 (2)
  • 3.125 (1)
  • 3.126 (2)
  • 3.1299 (1)
  • 3.13 (3)
  • 3.1496 (2)
  • 3.15 (5)
  • 3.189 (11)
  • 3.2 (2)
  • 3.228 (1)
  • 3.2283 (2)
  • 3.248 (2)
  • 3.25 (3)
  • 3.252 (2)
  • 3.282 (1)
  • 3.291 (1)
  • 3.3 (2)
  • 3.307 (2)
  • 3.3071 (5)
  • 3.312 (1)
  • 3.346 (2)
  • 3.375 (10)
  • 3.376 (3)
  • 3.3858 (1)
  • 3.386 (1)
  • 3.425 (1)
  • 3.4252 (9)
  • 3.445 (2)
  • 3.45 (2)
  • 3.4646 (3)
  • 3.465 (2)
  • 3.468 (1)
  • 3.472 (1)
  • 3.5 (7)
  • 3.543 (4)
  • 3.5433 (4)
  • 3.564 (1)
  • 3.6 (2)
  • 3.622 (4)
  • 3.624 (2)
  • 3.625 (1)
  • 3.626 (1)
  • 3.642 (2)
  • 3.657 (1)
  • 3.661 (1)
  • 3.6614 (9)
  • 3.7 (2)
  • 3.7008 (1)
  • 3.701 (1)
  • 3.74 (2)
  • 3.75 (13)
  • 3.752 (2)
  • 3.764 (1)
  • 3.7795 (5)
  • 3.78 (2)
  • 3.8071 (2)
  • 3.811 (2)
  • 3.815 (6)
  • 3.8189 (2)
  • 3.836 (1)
  • 3.839 (2)
  • 3.843 (1)
  • 3.85 (2)
  • 3.858 (1)