模块化钻头

选择筛选器
Filters
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P (2575)
    • P0
      低碳钢,长切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (2565)
    • P1
      低碳钢、短切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (2565)
    • P2
      中碳钢和高碳钢 C < .25%;<220 HB;<25 HRC;>530 N/mm^2 UTS (2565)
    • P3
      合金钢和工具钢 C > .25%;<330 HB;<35 HRC;600-850 N/mm^2 UTS (2565)
    • P4
      合金钢和工具钢 C > .25%;350-420 HB;35-43 HRC;850-1400 N/mm^2 UTS (2372)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB;<35 HRC;600-900 N/mm^2 UTS (2373)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB;35-43 HRC;900-2400 N/mm^2 UTS (2344)
  • M 不锈钢 (2131)
    • M1
      奥氏体不锈钢 130-200 HB;<600 N/mm^2 UTS (2131)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB;<25 HRC; >600 N/mm^2 UTS (2131)
    • M3
      双相不锈钢 135-275 HB;<30 HRC; 500-1200 N/mm^2 UTS (2056)
  • K 铸铁 (2369)
    • K1
      灰口铸铁 120-290 HB;<32 HRC; 125-500 N/mm^2 UTS (2369)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB;<28 HRC; <600 N/mm^2 UTS (2369)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB;<43 HRC; >600 N/mm^2 UTS (2369)
  • N 非铁金属材料 (1380)
    • N1
      铝型材 (1379)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (1379)
    • N3
      高硅铝合金 硅 > 12.2% (1379)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (1365)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (1118)
    • N6
      碳、石墨复合材料、CFRP (1109)
    • N7
      MMC (1105)
  • S 高温合金 (1832)
    • S1
      铁基耐热合金 160-260 HB;25-48 HRC;500-1200 N/mm^2 UTS (1806)
    • S2
      钴基耐热合金 250-450 HB;25-48 HRC;1000-1450 N/mm^2 UTS (1806)
    • S3
      镍基耐热合金 160-450 HB;<48 HRC; 600-1700 N/mm^2 UTS (1806)
    • S4
      钛和钛合金 300-400 HB;33-43 HRC;900-1600 N/mm^2 UTS (1832)
  • H 淬火材料 (131)
    • H1
      淬火材料 44-48 HRC (131)
    • H2
      淬火材料 48-55 HRC (29)
    • H3
      淬火材料 56-60 HRC (29)
    • H4
      淬火材料 >60 HRC (29)
  • C CFRP 材料 (186)
    • C1
      CFRP,CFRP/CFRP (72)
    • C2
      CFRP/铝 CFRP/有色金属 (181)
    • C3
      CFRP/钛 CFRP/高温 (181)
    • C4
      CFRP/不锈钢 (181)
选择 First Choice
  • BR (130)
  • CN (621)
  • DE (664)
  • GB (416)
  • IN (236)
  • SG (299)
  • US (705)
应用
应用
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (6)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Counterboring Counterboring (40)
  • Countersinking Countersinking (82)
  • Cross Hole Drilling Cross Hole Drilling (6)
  • Drilling Drilling (1138)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • Inclined Entry Drilling Inclined Entry Drilling (555)
  • Inclined Exit Drilling Inclined Exit Drilling (555)
  • Stacked Plates Drilling Stacked Plates Drilling (943)
  • X-Offset Drilling X-Offset Drilling (6)
切削直径
切削直径
  • 0.237 in (13)
  • 0.24 in (9)
  • 0.244 in (10)
  • 0.248 in (9)
  • 0.25 in (16)
  • 0.252 in (9)
  • 0.256 in (13)
  • 0.257 in (10)
  • 0.26 in (9)
  • 0.261 in (10)
  • 0.264 in (9)
  • 0.266 in (11)
  • 0.268 in (14)
  • 0.272 in (10)
  • 0.276 in (13)
  • 0.28 in (9)
  • 0.281 in (10)
  • 0.284 in (9)
  • 0.288 in (9)
  • 0.29 in (9)
  • 0.291 in (9)
  • 0.295 in (13)
  • 0.297 in (9)
  • 0.299 in (10)
  • 0.303 in (9)
  • 0.307 in (10)
  • 0.311 in (9)
  • 0.313 in (17)
  • 0.315 in (22)
  • 0.319 in (20)
  • 0.322 in (17)
  • 0.323 in (20)
  • 0.327 in (18)
  • 0.328 in (19)
  • 0.331 in (18)
  • 0.332 in (17)
  • 0.335 in (22)
  • 0.336 in (17)
  • 0.339 in (21)
  • 0.343 in (20)
  • 0.345 in (19)
  • 0.347 in (19)
  • 0.349 in (17)
  • 0.351 in (19)
  • 0.354 in (22)
  • 0.358 in (20)
  • 0.359 in (17)
  • 0.362 in (18)
  • 0.366 in (18)
  • 0.368 in (18)
  • 0.37 in (19)
  • 0.374 in (21)
  • 0.375 in (24)
  • 0.376 in (19)
  • 0.378 in (20)
  • 0.382 in (20)
  • 0.386 in (20)
  • 0.39 in (19)
  • 0.391 in (19)
  • 0.394 in (23)
  • 0.395 in (18)
  • 0.397 in (18)
  • 0.398 in (20)
  • 0.402 in (22)
  • 0.404 in (18)
  • 0.406 in (21)
  • 0.408 in (21)
  • 0.41 in (20)
  • 0.414 in (39)
  • 0.417 in (20)
  • 0.421 in (20)
  • 0.422 in (19)
  • 0.425 in (21)
  • 0.429 in (19)
  • 0.433 in (21)
  • 0.437 in (22)
  • 0.438 in (23)
  • 0.441 in (19)
  • 0.445 in (18)
  • 0.449 in (18)
  • 0.453 in (24)
  • 0.457 in (19)
  • 0.461 in (18)
  • 0.465 in (21)
  • 0.47 in (22)
  • 0.473 in (22)
  • 0.477 in (19)
  • 0.48 in (20)
  • 0.484 in (22)
  • 0.488 in (19)
  • 0.491 in (19)
  • 0.492 in (36)
  • 0.496 in (26)
  • 0.5 in (46)
  • 0.504 in (38)
  • 0.508 in (19)
  • 0.509 in (24)
  • 0.512 in (59)
  • 0.516 in (45)
  • 0.52 in (47)
  • 0.523 in (17)
  • 0.524 in (19)
  • 0.527 in (17)
  • 0.528 in (18)
  • 0.531 in (71)
  • 0.535 in (29)
  • 0.539 in (27)
  • 0.543 in (31)
  • 0.547 in (32)
  • 0.549 in (18)
  • 0.551 in (53)
  • 0.555 in (38)
  • 0.557 in (13)
  • 0.559 in (35)
  • 0.564 in (44)
  • 0.568 in (34)
  • 0.572 in (45)
  • 0.576 in (29)
  • 0.578 in (33)
  • 0.579 in (17)
  • 0.583 in (37)
  • 0.587 in (17)
  • 0.591 in (59)
  • 0.594 in (37)
  • 0.595 in (21)
  • 0.598 in (21)
  • 0.602 in (36)
  • 0.605 in (18)
  • 0.606 in (18)
  • 0.609 in (40)
  • 0.61 in (53)
  • 0.614 in (37)
  • 0.618 in (34)
  • 0.622 in (37)
  • 0.625 in (36)
  • 0.626 in (18)
  • 0.63 in (52)
  • 0.631 in (17)
  • 0.632 in (15)
  • 0.633 in (17)
  • 0.634 in (43)
  • 0.636 in (38)
  • 0.638 in (44)
  • 0.641 in (44)
  • 0.642 in (19)
  • 0.646 in (18)
  • 0.65 in (47)
  • 0.652 in (17)
  • 0.654 in (34)
  • 0.656 in (40)
  • 0.657 in (18)
  • 0.661 in (18)
  • 0.665 in (18)
  • 0.669 in (54)
  • 0.672 in (37)
  • 0.673 in (19)
  • 0.677 in (19)
  • 0.681 in (19)
  • 0.683 in (10)
  • 0.685 in (18)
  • 0.687 in (35)
  • 0.689 in (19)
  • 0.69 in (49)
  • 0.692 in (16)
  • 0.694 in (33)
  • 0.698 in (35)
  • 0.7 in (14)
  • 0.702 in (33)
  • 0.704 in (38)
  • 0.705 in (34)
  • 0.709 in (43)
  • 0.713 in (19)
  • 0.717 in (17)
  • 0.719 in (34)
  • 0.72 in (28)
  • 0.724 in (27)
  • 0.728 in (41)
  • 0.732 in (31)
  • 0.734 in (35)
  • 0.736 in (19)
  • 0.74 in (28)
  • 0.744 in (28)
  • 0.748 in (63)
  • 0.75 in (49)
  • 0.752 in (16)
  • 0.756 in (40)
  • 0.757 in (40)
  • 0.758 in (41)
  • 0.759 in (43)
  • 0.76 in (16)
  • 0.761 in (26)
  • 0.762 in (43)
  • 0.763 in (25)
  • 0.764 in (15)
  • 0.766 in (48)
  • 0.768 in (59)
  • 0.772 in (15)
  • 0.774 in (15)
  • 0.776 in (31)
  • 0.78 in (17)
  • 0.781 in (34)
  • 0.784 in (16)
  • 0.787 in (32)
  • 0.788 in (7)
  • 0.791 in (18)
  • 0.795 in (10)
  • 0.797 in (23)
  • 0.799 in (10)
  • 0.801 in (11)
  • 0.807 in (34)
  • 0.811 in (10)
  • 0.814 in (33)
  • 0.816 in (26)
  • 0.82 in (9)
  • 0.824 in (9)
  • 0.828 in (52)
  • 0.832 in (24)
  • 0.833 in (18)
  • 0.835 in (19)
  • 0.839 in (9)
  • 0.84 in (10)
  • 0.843 in (9)
  • 0.844 in (22)
  • 0.846 in (37)
  • 0.854 in (22)
  • 0.858 in (10)
  • 0.859 in (28)
  • 0.862 in (9)
  • 0.866 in (37)
  • 0.87 in (16)
  • 0.872 in (6)
  • 0.874 in (10)
  • 0.875 in (37)
  • 0.882 in (9)
  • 0.884 in (32)
  • 0.886 in (47)
  • 0.89 in (9)
  • 0.891 in (25)
  • 0.894 in (9)
  • 0.897 in (12)
  • 0.898 in (10)
  • 0.902 in (9)
  • 0.906 in (40)
  • 0.907 in (12)
  • 0.909 in (21)
  • 0.913 in (10)
  • 0.915 in (12)
  • 0.917 in (21)
  • 0.921 in (9)
  • 0.922 in (29)
  • 0.925 in (39)
  • 0.929 in (18)
  • 0.933 in (20)
  • 0.937 in (28)
  • 0.942 in (9)
  • 0.946 in (39)
  • 0.95 in (9)
  • 0.954 in (9)
  • 0.958 in (15)
  • 0.961 in (9)
  • 0.965 in (29)
  • 0.969 in (28)
  • 0.972 in (23)
  • 0.976 in (9)
  • 0.98 in (9)
  • 0.984 in (62)
  • 0.987 in (29)
  • 0.988 in (9)
  • 0.992 in (9)
  • 0.994 in (23)
  • 0.996 in (23)
  • 1.0 in (46)
  • 1.004 in (50)
  • 1.006 in (28)
  • 1.008 in (34)
  • 1.01 in (32)
  • 1.012 in (38)
  • 1.014 in (26)
  • 1.016 in (39)
  • 1.02 in (9)
  • 1.024 in (36)
  • 1.032 in (14)
  • 1.035 in (11)
  • 1.043 in (21)
  • 1.044 in (10)
  • 1.047 in (12)
  • 1.051 in (11)
  • 1.063 in (28)
  • 1.083 in (21)
  • 1.094 in (10)
  • 1.102 in (25)
  • 1.106 in (6)
  • 1.109 in (12)
  • 1.116 in (9)
  • 1.122 in (22)
  • 1.125 in (24)
  • 1.143 in (34)
  • 1.156 in (19)
  • 1.161 in (24)
  • 1.163 in (12)
  • 1.17 in (13)
  • 1.172 in (18)
  • 1.181 in (24)
  • 1.187 in (10)
  • 1.188 in (2)
  • 1.201 in (24)
  • 1.203 in (15)
  • 1.219 in (15)
  • 1.22 in (26)
  • 1.226 in (12)
  • 1.23 in (11)
  • 1.24 in (15)
  • 1.25 in (29)
  • 1.26 in (36)
  • 1.268 in (8)
  • 1.274 in (8)
  • 1.28 in (11)
  • 1.282 in (13)
  • 1.297 in (13)
  • 1.299 in (32)
  • 1.307 in (2)
  • 1.313 in (20)
  • 1.315 in (18)
  • 1.319 in (19)
  • 1.328 in (18)
  • 1.339 in (35)
  • 1.344 in (21)
  • 1.358 in (21)
  • 1.375 in (26)
  • 1.379 in (35)
  • 1.399 in (22)
  • 1.407 in (25)
  • 1.417 in (36)
  • 1.422 in (11)
  • 1.437 in (14)
  • 1.438 in (2)
  • 1.457 in (28)
  • 1.469 in (15)
  • 1.476 in (23)
  • 1.496 in (36)
  • 1.5 in (23)
  • 1.514 in (23)
  • 1.516 in (23)
  • 1.536 in (35)
  • 1.543 in (21)
  • 1.555 in (19)
  • 1.563 in (2)
  • 1.565 in (17)
  • 1.575 in (30)
  • 1.614 in (2)
  • 1.625 in (2)
  • 1.655 in (2)
  • 1.693 in (2)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.772 in (2)
  • 1.811 in (2)
  • 1.85 in (2)
  • 1.875 in (2)
  • 1.891 in (2)
  • 1.929 in (2)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.008 in (2)
  • 2.047 in (2)
  • 2.087 in (2)
  • 2.125 in (2)
  • 2.126 in (2)
  • 2.165 in (2)
  • 2.205 in (2)
  • 2.244 in (2)
  • 2.25 in (2)
  • 2.283 in (2)
  • 2.323 in (2)
  • 2.362 in (4)
  • 2.375 in (2)
  • 2.402 in (2)
  • 2.441 in (2)
  • 2.48 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.559 in (2)
  • 2.598 in (2)
  • 2.625 in (2)
  • 2.638 in (2)
  • 2.677 in (2)
  • 2.717 in (2)
  • 2.75 in (2)
  • 2.757 in (2)
  • 2.795 in (2)
  • 2.835 in (2)
  • 2.874 in (2)
  • 2.875 in (2)
  • 2.914 in (2)
  • 2.953 in (4)
  • 2.992 in (2)
  • 3.0 in (2)
  • 3.071 in (2)
  • 3.125 in (2)
  • 3.15 in (2)
  • 3.189 in (1)
  • 3.228 in (1)
  • 3.25 in (2)
  • 3.307 in (2)
  • 3.346 in (1)
  • 3.375 in (1)
  • 3.386 in (2)
  • 3.426 in (1)
  • 3.465 in (1)
  • 3.5 in (2)
  • 3.504 in (1)
  • 3.543 in (3)
  • 3.622 in (2)
  • 3.625 in (1)
  • 3.74 in (2)
  • 3.75 in (2)
  • 3.781 in (2)
  • 3.858 in (1)
  • 3.898 in (1)
  • 3.938 in (2)
  • 4.0 in (2)
切削直径 Min 切削直径 Max