successfully added to cart
View Cart

Notifications

Mark all as read
Read More

针对工件材料的 HPX 刃口处理
直型切削刃可减少切削刃部位和刃带部位的积屑瘤形成和崩刃现象。

针对工件材料的 HPX 钻尖设计
专利 HPX 钻尖具有极佳的定中心性能,可降低钻入力并确保精准的切屑形成。

针对工件材料的 HPX 刃带设计 
两刃带设计确保稳定性并减小摩擦力。

HPX 钻设计
切削参数可提高 3 倍,缩短加工时间,释放无尽生产力。

高度抛光的排屑槽可减少摩擦力,改善排屑性能,并延长刀具寿命。

连续的排屑槽横截面,可减少振动,并减少切削刃的崩刃现象。

HPX Drills

140˚ 钻尖角度 - 用于理想切削条件。 可以作为深孔钻的引导钻使用。

两刃带设计,确保稳定性并减小摩擦力。

直型切削刃 - 可减少切削刃部位和刃带部位的积屑瘤形成和崩刃现象。

 

HPX Drills

标准 MQL 柄部

可进行高达 8xD 的钻削加工

钻角处倒角 - 保护切削刃口,减少崩刃并延长刀具寿命。

 

降低切削力,可靠性一再提升

HPX 钻在钢应用中的刀具寿命始终高于竞争对手的刀具,即使在进给量和速度显著增加的情况下也是如此。

HPX 钻上的特殊打孔可以改善切屑形成,并卷曲较小的切屑。针对特定材料的 HPX 钻尖槽型可显著降低切削力,非常适合用于具有较低主轴功率、不稳定切削条件或不稳定工件夹持的机床。连续的横截面使 HPX 钻更耐刀具断裂,高度抛光的排屑槽可确保出色的排屑能力。

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
Applications
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (800)
  • Drilling Drilling (800)
  • Stacked Plates Drilling Stacked Plates Drilling (800)
Cutting Diameter
Cutting Diameter
  • 0.119 in (5)
  • 0.12 in (5)
  • 0.122 in (5)
  • 0.125 in (7)
  • 0.126 in (6)
  • 0.129 in (7)
  • 0.13 in (5)
  • 0.134 in (5)
  • 0.136 in (7)
  • 0.138 in (6)
  • 0.142 in (6)
  • 0.143 in (5)
  • 0.146 in (5)
  • 0.15 in (6)
  • 0.154 in (5)
  • 0.156 in (7)
  • 0.157 in (7)
  • 0.161 in (6)
  • 0.165 in (7)
  • 0.169 in (5)
  • 0.174 in (5)
  • 0.177 in (7)
  • 0.181 in (6)
  • 0.185 in (6)
  • 0.188 in (7)
  • 0.189 in (6)
  • 0.193 in (5)
  • 0.197 in (7)
  • 0.201 in (13)
  • 0.203 in (7)
  • 0.206 in (7)
  • 0.209 in (5)
  • 0.213 in (12)
  • 0.217 in (7)
  • 0.219 in (7)
  • 0.221 in (6)
  • 0.224 in (5)
  • 0.228 in (10)
  • 0.232 in (5)
  • 0.237 in (7)
  • 0.24 in (6)
  • 0.244 in (6)
  • 0.248 in (5)
  • 0.25 in (7)
  • 0.252 in (5)
  • 0.256 in (7)
  • 0.26 in (6)
  • 0.264 in (5)
  • 0.266 in (7)
  • 0.268 in (7)
  • 0.272 in (6)
  • 0.276 in (7)
  • 0.28 in (5)
  • 0.281 in (7)
  • 0.284 in (5)
  • 0.288 in (5)
  • 0.291 in (6)
  • 0.295 in (5)
  • 0.297 in (7)
  • 0.307 in (6)
  • 0.313 in (7)
  • 0.315 in (7)
  • 0.319 in (6)
  • 0.323 in (5)
  • 0.328 in (7)
  • 0.335 in (7)
  • 0.343 in (5)
  • 0.345 in (7)
  • 0.347 in (6)
  • 0.354 in (7)
  • 0.359 in (7)
  • 0.37 in (5)
  • 0.374 in (6)
  • 0.375 in (7)
  • 0.386 in (6)
  • 0.394 in (7)
  • 0.402 in (6)
  • 0.406 in (6)
  • 0.408 in (7)
  • 0.414 in (7)
  • 0.422 in (7)
  • 0.425 in (5)
  • 0.433 in (6)
  • 0.438 in (7)
  • 0.453 in (13)
  • 0.47 in (6)
  • 0.473 in (7)
  • 0.484 in (6)
  • 0.492 in (6)
  • 0.5 in (7)
  • 0.512 in (6)
  • 0.531 in (7)
  • 0.551 in (7)
  • 0.564 in (9)
  • 0.572 in (5)
  • 0.591 in (5)
  • 0.61 in (5)
  • 0.625 in (7)
  • 0.63 in (5)
  • 0.65 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.0 mm (5)
  • 3.051 mm (5)
  • 3.1 mm (5)
  • 3.176 mm (7)
  • 3.2 mm (6)
  • 3.276 mm (7)
  • 3.301 mm (5)
  • 3.401 mm (5)
  • 3.45 mm (7)
  • 3.5 mm (6)
  • 3.575 mm (6)
  • 3.6 mm (5)
  • 3.7 mm (5)
  • 3.801 mm (6)
  • 3.901 mm (5)
  • 3.975 mm (7)
  • 4.0 mm (7)
  • 4.101 mm (6)
  • 4.2 mm (7)
  • 4.3 mm (5)
  • 4.4 mm (5)
  • 4.5 mm (7)
  • 4.601 mm (6)
  • 4.7 mm (6)
  • 4.775 mm (7)
  • 4.801 mm (6)
  • 4.9 mm (5)
  • 5.0 mm (7)
  • 5.101 mm (13)
  • 5.15 mm (7)
  • 5.2 mm (7)
  • 5.301 mm (5)
  • 5.4 mm (12)
  • 5.5 mm (7)
  • 5.551 mm (7)
  • 5.601 mm (6)
  • 5.7 mm (5)
  • 5.801 mm (10)
  • 5.9 mm (5)
  • 6.0 mm (7)
  • 6.101 mm (6)
  • 6.2 mm (6)
  • 6.301 mm (5)
  • 6.351 mm (7)
  • 6.4 mm (5)
  • 6.5 mm (7)
  • 6.601 mm (6)
  • 6.7 mm (5)
  • 6.75 mm (7)
  • 6.801 mm (7)
  • 6.9 mm (6)
  • 7.0 mm (7)
  • 7.101 mm (5)
  • 7.15 mm (7)
  • 7.2 mm (5)
  • 7.301 mm (5)
  • 7.4 mm (6)
  • 7.5 mm (5)
  • 7.551 mm (7)
  • 7.801 mm (6)
  • 7.95 mm (7)
  • 8.0 mm (7)
  • 8.1 mm (6)
  • 8.201 mm (5)
  • 8.326 mm (7)
  • 8.5 mm (7)
  • 8.701 mm (5)
  • 8.725 mm (7)
  • 8.8 mm (6)
  • 9.0 mm (7)
  • 9.125 mm (7)
  • 9.4 mm (5)
  • 9.5 mm (6)
  • 9.525 mm (7)
  • 9.8 mm (6)
  • 10.0 mm (7)
  • 10.201 mm (6)
  • 10.3 mm (6)
  • 10.326 mm (7)
  • 10.5 mm (7)
  • 10.726 mm (7)
  • 10.8 mm (5)
  • 11.0 mm (6)
  • 11.125 mm (7)
  • 11.5 mm (13)
  • 11.9 mm (6)
  • 12.0 mm (7)
  • 12.3 mm (6)
  • 12.5 mm (6)
  • 12.701 mm (7)
  • 13.0 mm (6)
  • 13.5 mm (7)
  • 14.0 mm (7)
  • 14.3 mm (9)
  • 14.5 mm (5)
  • 15.0 mm (5)
  • 15.5 mm (5)
  • 15.875 mm (7)
  • 16.0 mm (5)
  • 16.5 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 14.0 mm (28)
  • 17.0 mm (27)
  • 17.401 mm (4)
  • 20.0 mm (41)
  • 21.401 mm (8)
  • 22.6 mm (2)
  • 23.0 mm (26)
  • 24.0 mm (24)
  • 25.901 mm (5)
  • 28.3 mm (5)
  • 28.6 mm (8)
  • 29.0 mm (52)
  • 33.0 mm (13)
  • 34.7 mm (4)
  • 34.9 mm (12)
  • 35.0 mm (88)
  • 38.1 mm (4)
  • 39.6 mm (4)
  • 40.0 mm (35)
  • 40.301 mm (9)
  • 41.0 mm (10)
  • 43.0 mm (80)
  • 45.0 mm (22)
  • 46.5 mm (1)
  • 48.0 mm (18)
  • 48.7 mm (10)
  • 49.0 mm (51)
  • 51.0 mm (10)
  • 53.1 mm (6)
  • 55.0 mm (8)
  • 55.6 mm (5)
  • 56.0 mm (43)
  • 57.0 mm (12)
  • 60.0 mm (31)
  • 63.0 mm (22)
  • 64.0 mm (10)
  • 64.5 mm (1)
  • 71.0 mm (12)
  • 73.0 mm (1)
  • 77.0 mm (8)
  • 80.0 mm (14)
  • 96.0 mm (11)
  • 112.0 mm (5)
  • 128.0 mm (6)
  • 144.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.551 in (28)
  • 0.669 in (27)
  • 0.685 in (4)
  • 0.787 in (41)
  • 0.843 in (8)
  • 0.89 in (2)
  • 0.906 in (26)
  • 0.946 in (24)
  • 1.02 in (5)
  • 1.114 in (5)
  • 1.127 in (8)
  • 1.143 in (52)
  • 1.299 in (13)
  • 1.366 in (4)
  • 1.374 in (12)
  • 1.379 in (88)
  • 1.5 in (4)
  • 1.559 in (4)
  • 1.575 in (35)
  • 1.587 in (9)
  • 1.614 in (10)
  • 1.693 in (80)
  • 1.772 in (22)
  • 1.831 in (1)
  • 1.891 in (18)
  • 1.917 in (10)
  • 1.929 in (51)
  • 2.008 in (10)
  • 2.091 in (6)
  • 2.165 in (8)
  • 2.189 in (5)
  • 2.205 in (43)
  • 2.244 in (12)
  • 2.362 in (31)
  • 2.48 in (22)
  • 2.52 in (10)
  • 2.539 in (1)
  • 2.795 in (12)
  • 2.874 in (1)
  • 3.031 in (8)
  • 3.15 in (14)
  • 3.781 in (11)
  • 4.409 in (5)
  • 5.039 in (6)
  • 5.67 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (28)
  • 0.906 in (4)
  • 0.946 in (27)
  • 1.063 in (8)
  • 1.102 in (67)
  • 1.143 in (2)
  • 1.339 in (29)
  • 1.379 in (8)
  • 1.417 in (29)
  • 1.496 in (5)
  • 1.575 in (13)
  • 1.614 in (23)
  • 1.693 in (12)
  • 1.732 in (47)
  • 1.811 in (4)
  • 1.85 in (41)
  • 1.929 in (10)
  • 1.969 in (9)
  • 2.008 in (4)
  • 2.087 in (57)
  • 2.126 in (4)
  • 2.165 in (35)
  • 2.205 in (18)
  • 2.323 in (1)
  • 2.362 in (32)
  • 2.402 in (51)
  • 2.52 in (1)
  • 2.559 in (22)
  • 2.598 in (6)
  • 2.638 in (12)
  • 2.757 in (5)
  • 2.795 in (43)
  • 2.874 in (10)
  • 2.914 in (10)
  • 2.992 in (4)
  • 3.031 in (27)
  • 3.11 in (8)
  • 3.228 in (1)
  • 3.269 in (22)
  • 3.622 in (15)
  • 3.661 in (12)
  • 3.976 in (8)
  • 4.331 in (11)
  • 5.039 in (5)
  • 5.748 in (6)
  • 6.417 in (4)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (28)
  • 23.0 mm (4)
  • 24.0 mm (27)
  • 27.0 mm (8)
  • 28.0 mm (67)
  • 29.0 mm (2)
  • 34.0 mm (29)
  • 35.0 mm (8)
  • 36.0 mm (29)
  • 38.0 mm (5)
  • 40.0 mm (13)
  • 41.0 mm (23)
  • 43.0 mm (12)
  • 44.0 mm (47)
  • 46.0 mm (4)
  • 47.0 mm (41)
  • 49.0 mm (10)
  • 50.0 mm (9)
  • 51.0 mm (4)
  • 53.0 mm (57)
  • 54.0 mm (4)
  • 55.0 mm (35)
  • 56.0 mm (18)
  • 59.0 mm (1)
  • 60.0 mm (32)
  • 61.0 mm (51)
  • 64.0 mm (1)
  • 65.0 mm (22)
  • 66.0 mm (6)
  • 67.0 mm (12)
  • 70.0 mm (5)
  • 71.0 mm (43)
  • 73.0 mm (10)
  • 74.0 mm (10)
  • 76.0 mm (4)
  • 77.0 mm (27)
  • 79.0 mm (8)
  • 82.0 mm (1)
  • 83.0 mm (22)
  • 92.0 mm (15)
  • 93.0 mm (12)
  • 101.0 mm (8)
  • 110.0 mm (11)
  • 128.0 mm (5)
  • 146.0 mm (6)
  • 163.0 mm (4)
Reach Min to Reach Max
Connection Style
Connection Style
  • Straight-Cylindrical (755)
  • Whistle Notch 2 CylindricalEnd (45)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • TiN/AlTiN (754)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCP15B (799)
backEnd
Back-End Diameter
Back-End Diameter
  • 4.775 mm (22)
  • 6.0 mm (239)
  • 6.351 mm (17)
  • 7.95 mm (14)
  • 8.0 mm (126)
  • 9.525 mm (14)
  • 10.0 mm (106)
  • 11.125 mm (10)
  • 12.0 mm (89)
  • 12.701 mm (9)
  • 14.0 mm (54)
  • 14.3 mm (5)
  • 15.875 mm (2)
  • 16.0 mm (50)
  • 17.45 mm (1)
  • 18.0 mm (26)
  • 20.0 mm (16)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.188 in (22)
  • 0.237 in (239)
  • 0.25 in (17)
  • 0.313 in (14)
  • 0.315 in (126)
  • 0.375 in (14)
  • 0.394 in (106)
  • 0.438 in (10)
  • 0.473 in (89)
  • 0.5 in (9)
  • 0.551 in (54)
  • 0.564 in (5)
  • 0.625 in (2)
  • 0.63 in (50)
  • 0.687 in (1)
  • 0.709 in (26)
  • 0.787 in (16)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

高性能整体硬质合金钻

HPX • K225 • 5 x D • 内冷
(64 Products)
  • 刀柄—  圆柱 平面度 ≤h6刀柄— 圆柱 平面度 ≤h6
  • 钻孔钻孔
  • 刀具尺寸: 2个排屑槽/2个刃带/冷却刀具尺寸: 2个排屑槽/2个刃带/冷却
  • 钻孔 —  贯通式冷却钻孔 — 贯通式冷却
  • 贯通式冷却: MQL(微量润滑): 钻孔贯通式冷却: MQL(微量润滑): 钻孔
  • Corner Style: Corner ChamferCorner Style: Corner Chamfer
  • Drilling: Stacked PlatesDrilling: Stacked Plates
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Drill Diameter M [D1] Drill Diameter M [D1] Wire Size [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
6782501 K225A01260HPX K225A01260HPX KCP15B 3.2004 .1260   66.0000 2.598 27.0000 1.063 21.4000 .8425 0.7400 .0291 36.5 1.437 4.7625 .1875
    List price:
    $142.49 /each.
    Your price::
    Qty
    6782509 K225A01590HPX K225A01590HPX KCP15B 4.0386 .1590 21 74.0000 2.913 35.0000 1.378 28.6000 1.126 0.9100 .0358 36.5 1.437 4.7625 .1875
      List price:
      $142.49 /each.
      Your price::
      Qty
      6782521 K225A02130HPX K225A02130HPX KCP15B 5.4102 .2130 3 82.0000 3.228 43.0000 1.692 34.9000 1.374 1.1900 .0469 36.5 1.437 6.35 .25
        List price:
        $142.49 /each.
        Your price::
        Qty
        6782523 K225A02188HPX K225A02188HPX KCP15B 5.5575 .2188   82.0000 3.228 43.0000 1.692 34.9000 1.374 1.2200 .0480 36.5 1.437 6.35 .25
          List price:
          $142.49 /each.
          Your price::
          Qty
          6782528 K225A02559HPX K225A02559HPX KCP15B 6.4999 .2559   91.0000 3.582 50.0000 1.968 40.3000 1.586 1.4100 .0555 38.5 1.515 7.9375 .3125
            List price:
            $187.79 /each.
            Your price::
            Qty
            6782533 K225A02756HPX K225A02756HPX KCP15B 7.0000 .2756   91.0000 3.582 50.0000 1.968 40.3000 1.586 1.5200 .0598 38.5 1.515 7.9375 .3125
              List price:
              $187.79 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              高性能整体硬质合金钻

              HPX • B224 • 3 x D • 内冷
              (111 Products)
              • 钻孔钻孔
              • Corner Style: Corner ChamferCorner Style: Corner Chamfer
              • 刀柄—  圆柱 平面度 ≤h6刀柄— 圆柱 平面度 ≤h6
              • 钻孔 —  贯通式冷却钻孔 — 贯通式冷却
              • 贯通式冷却: MQL(微量润滑): 钻孔贯通式冷却: MQL(微量润滑): 钻孔
              • 刀具尺寸: 2个排屑槽/2个刃带/冷却刀具尺寸: 2个排屑槽/2个刃带/冷却
              • Drilling: Stacked PlatesDrilling: Stacked Plates
              View Products
              SAP Material Number