Mill 1-7™ • Two Cutting Edges • Ap1 max 7mm

选择筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P (12)
    • P0
      低碳钢,长切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (12)
    • P1
      低碳钢、短切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (12)
    • P2
      中碳钢和高碳钢 C < .25%;<220 HB;<25 HRC;>530 N/mm^2 UTS (12)
    • P3
      合金钢和工具钢 C > .25%;<330 HB;<35 HRC;600-850 N/mm^2 UTS (12)
    • P4
      合金钢和工具钢 C > .25%;350-420 HB;35-43 HRC;850-1400 N/mm^2 UTS (12)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB;<35 HRC;600-900 N/mm^2 UTS (12)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB;35-43 HRC;900-2400 N/mm^2 UTS (12)
  • M 不锈钢 (12)
    • M1
      奥氏体不锈钢 130-200 HB;<600 N/mm^2 UTS (12)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB;<25 HRC; >600 N/mm^2 UTS (12)
    • M3
      双相不锈钢 135-275 HB;<30 HRC; 500-1200 N/mm^2 UTS (12)
  • K 铸铁 (9)
    • K1
      灰口铸铁 120-290 HB;<32 HRC; 125-500 N/mm^2 UTS (9)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB;<28 HRC; <600 N/mm^2 UTS (9)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB;<43 HRC; >600 N/mm^2 UTS (9)
  • S 高温合金 (12)
    • S1
      铁基耐热合金 160-260 HB;25-48 HRC;500-1200 N/mm^2 UTS (11)
    • S2
      钴基耐热合金 250-450 HB;25-48 HRC;1000-1450 N/mm^2 UTS (11)
    • S3
      镍基耐热合金 160-450 HB;<48 HRC; 600-1700 N/mm^2 UTS (11)
    • S4
      钛和钛合金 300-400 HB;33-43 HRC;900-1600 N/mm^2 UTS (12)
  • H 淬火材料 (9)
    • H1
      淬火材料 44-48 HRC (9)
应用
应用
  • Face Milling Face Milling (7)
  • Pocket Pocket (7)
  • Pocket Helical Pocket Helical (7)
  • Pocket Milling Pocket Milling (7)
  • Ramping Ramping (7)
  • Shoulder Milling Shoulder Milling (7)
  • Shoulder Square End Shoulder Square End (7)
  • Slot Milling Slot Milling (7)
  • Slot Square End Slot Square End (7)
切削直径
切削直径
  • 0.468 in (1)
  • 0.473 in (1)
  • 0.496 in (1)
  • 0.62 in (1)
  • 0.63 in (1)
  • 0.745 in (1)
  • 0.787 in (1)
切削直径 Min 切削直径 Max
切削直径
切削直径
  • 11.875 mm (1)
  • 12.0 mm (1)
  • 12.601 mm (1)
  • 15.75 mm (1)
  • 16.0 mm (1)
  • 18.925 mm (1)
  • 20.0 mm (1)
切削直径 Min 切削直径 Max
切削长度
切削长度
  • 6.926 mm (2)
  • 6.95 mm (3)
  • 6.976 mm (2)
切削长度 Min 切削长度 Max
切削长度
切削长度
  • 0.273 in (2)
  • 0.274 in (3)
  • 0.275 in (2)
切削长度 Min 切削长度 Max
范围
范围
  • 0.709 in (1)
  • 0.75 in (1)
  • 0.787 in (3)
  • 1.0 in (2)
范围 Min 范围 Max
范围
范围
  • 18.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 25.401 mm (2)
范围 Min 范围 Max
刀具切削刃角度
刀具切削刃角度
  • 90.0 (7)
刀具切削刃角度 Min 刀具切削刃角度 Max
连接类型
连接类型
  • Screw-On Connection (1)
  • Straight-Cylindrical (6)
排屑槽数量
排屑槽数量
  • 2 (3)
  • 3 (2)
  • 5 (2)
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 1.484 in (1)
  • 3.938 in (2)
  • 4.0 in (1)
  • 4.331 in (1)
  • 5.0 in (1)
  • 6.0 in (1)
总长 [L] Min 总长 [L] Max
总长 [L]
总长 [L]
  • 37.7 mm (1)
  • 100.0 mm (2)
  • 101.601 mm (1)
  • 110.0 mm (1)
  • 127.0 mm (1)
  • 152.4 mm (1)
总长 [L] Min 总长 [L] Max
application
切削刀具材质
切削刀具材质
  • KC522M (8)
  • KC725M (8)
  • KCPK30 (8)
  • KCPM40 (8)
  • KCSM30 (8)
刀具手式
刀具手式
  • R (7)
修光刃刀片
修光刃刀片
  • N (5)
最大坡铣角度
最大坡铣角度
  • 2.01 (1)
  • 2.17 (1)
  • 2.92 (1)
  • 2.97 (1)
  • 4.59 (1)
  • 5.18 (2)
最大坡铣角度 Min 最大坡铣角度 Max
frontEnd
颈部直径
颈部直径
  • 0.414 in (1)
  • 0.455 in (1)
  • 0.586 in (1)
  • 0.595 in (1)
  • 0.704 in (1)
  • 0.74 in (1)
颈部直径 Min 颈部直径 Max
颈部直径
颈部直径
  • 10.5 mm (1)
  • 11.55 mm (1)
  • 14.875 mm (1)
  • 15.101 mm (1)
  • 17.85 mm (1)
  • 18.8 mm (1)
颈部直径 Min 颈部直径 Max
中心切削
中心切削
insertGeometry
形状
形状
  • X-PARALLELOGRAM 75 (5)
切削刃长度
切削刃长度
  • 7.125 mm (5)
切削刃长度 Min 切削刃长度 Max
切削刃长度
切削刃长度
  • 0.281 in (5)
切削刃长度 Min 切削刃长度 Max
断屑槽 CBMD
断屑槽 CBMD
  • GE (5)
切削刀具材料
切削刀具材料
  • H W (5)
公差等级
公差等级
  • P (5)
backEnd
连接类型
连接类型
  • CYLINDRICAL (6)
  • SCREW-ON (1)
后端直径
后端直径
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 13.0 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (1)
后端直径 Min 后端直径 Max
后端直径
后端直径
  • 0.473 in (1)
  • 0.5 in (1)
  • 0.512 in (1)
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.75 in (1)
  • 0.787 in (1)
后端直径 Min 后端直径 Max
No filters matching ""
您即将把 添加至“我的解决方案”页面. 是否要继续?
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用,请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功,现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?