欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

Mill 1-14™ • Two Cutting Edges • Ap1 max 14mm

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (192)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (174)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (174)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (174)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (174)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (174)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (192)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (192)
  • M 不锈钢 (192)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (192)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (192)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (192)
  • K 铸铁 (156)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (156)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (156)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (156)
  • N 非铁金属材料 (115)
    • N1
      铝型材 (115)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (115)
    • N3
      高硅铝合金 硅 > 12.2% (115)
  • S 高温合金 (190)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (174)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (174)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (174)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (190)
  • H 淬火材料 (126)
    • H1
      淬火材料 44-48 HRC (126)
选择 First Choice
  • BR (10)
  • CN (103)
  • DE (106)
  • GB (63)
  • IN (20)
  • SG (40)
  • US (91)
应用
应用
  • Face Milling Face Milling (105)
  • Pocket Pocket (105)
  • Pocket Helical Pocket Helical (105)
  • Pocket Milling Pocket Milling (105)
  • Profile Milling Profile Milling (3)
  • Ramping Ramping (105)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (3)
  • Shoulder Milling Shoulder Milling (105)
  • Shoulder Roughing Shoulder Roughing (26)
  • Shoulder Square End Shoulder Square End (105)
  • Slot Milling Slot Milling (84)
  • Slot Side Slot Side (3)
  • Slot Square End Slot Square End (84)
切削直径
切削直径
  • 0.625 in (1)
  • 0.75 in (3)
  • 0.787 in (4)
  • 0.875 in (1)
  • 0.971 in (1)
  • 0.984 in (8)
  • 1.0 in (7)
  • 1.25 in (9)
  • 1.26 in (11)
  • 1.5 in (11)
  • 1.575 in (14)
  • 1.969 in (5)
  • 2.0 in (6)
  • 2.48 in (7)
  • 2.5 in (5)
  • 3.0 in (3)
  • 3.15 in (2)
  • 3.938 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 6.299 in (1)
切削直径 Min 到 切削直径 Max
切削直径
切削直径
  • 15.875 mm (1)
  • 19.05 mm (3)
  • 20.0 mm (4)
  • 22.225 mm (1)
  • 24.651 mm (1)
  • 25.0 mm (8)
  • 25.401 mm (7)
  • 31.75 mm (9)
  • 32.0 mm (11)
  • 38.1 mm (11)
  • 40.0 mm (14)
  • 50.0 mm (5)
  • 50.801 mm (6)
  • 63.0 mm (7)
  • 63.5 mm (5)
  • 76.2 mm (3)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 101.601 mm (2)
  • 125.0 mm (2)
  • 160.0 mm (1)
切削直径 Min 到 切削直径 Max
切削长度
切削长度
  • 14.0 mm (14)
  • 14.101 mm (6)
  • 14.201 mm (2)
  • 14.3 mm (11)
  • 14.4 mm (9)
  • 14.476 mm (6)
  • 14.5 mm (9)
  • 14.601 mm (15)
  • 14.701 mm (3)
  • 14.726 mm (6)
  • 15.5 mm (1)
  • 26.901 mm (1)
  • 27.201 mm (1)
  • 27.3 mm (1)
  • 27.5 mm (1)
  • 27.6 mm (1)
  • 27.8 mm (2)
  • 39.901 mm (2)
  • 39.95 mm (2)
  • 40.401 mm (2)
  • 40.801 mm (2)
  • 40.95 mm (1)
  • 52.801 mm (1)
  • 52.825 mm (1)
  • 52.85 mm (1)
  • 53.45 mm (1)
  • 53.5 mm (1)
  • 54.0 mm (1)
  • 54.1 mm (1)
切削长度 Min 到 切削长度 Max
切削长度
切削长度
  • 0.551 in (14)
  • 0.555 in (6)
  • 0.559 in (2)
  • 0.564 in (11)
  • 0.568 in (9)
  • 0.571 in (6)
  • 0.572 in (9)
  • 0.576 in (15)
  • 0.579 in (3)
  • 0.58 in (6)
  • 0.61 in (1)
  • 1.059 in (1)
  • 1.071 in (1)
  • 1.075 in (1)
  • 1.083 in (1)
  • 1.087 in (1)
  • 1.094 in (2)
  • 1.571 in (2)
  • 1.573 in (2)
  • 1.591 in (2)
  • 1.606 in (2)
  • 1.612 in (1)
  • 2.079 in (1)
  • 2.08 in (1)
  • 2.081 in (1)
  • 2.104 in (1)
  • 2.106 in (1)
  • 2.126 in (1)
  • 2.13 in (1)
切削长度 Min 到 切削长度 Max
范围
范围
  • 1.379 in (3)
  • 1.5 in (3)
  • 1.536 in (2)
  • 1.575 in (17)
  • 1.625 in (1)
  • 1.73 in (1)
  • 1.732 in (4)
  • 1.75 in (13)
  • 1.969 in (25)
  • 2.0 in (5)
  • 2.23 in (2)
  • 2.25 in (10)
  • 2.48 in (3)
  • 2.5 in (4)
  • 2.559 in (4)
  • 2.953 in (2)
  • 3.0 in (3)
  • 3.15 in (3)
范围 Min 到 范围 Max
范围
范围
  • 35.0 mm (3)
  • 38.1 mm (3)
  • 39.0 mm (2)
  • 40.0 mm (17)
  • 41.276 mm (1)
  • 43.95 mm (1)
  • 44.0 mm (4)
  • 44.45 mm (13)
  • 50.0 mm (25)
  • 50.801 mm (5)
  • 56.651 mm (2)
  • 57.151 mm (10)
  • 63.0 mm (3)
  • 63.5 mm (4)
  • 65.0 mm (4)
  • 75.0 mm (2)
  • 76.2 mm (3)
  • 80.0 mm (3)
范围 Min 到 范围 Max
刀具切削刃角度
刀具切削刃角度
  • 90.0 (105)
刀具切削刃角度 Min 到 刀具切削刃角度 Max
连接类型
连接类型
  • A-Socket Head Cap Screw (34)
  • B-Cutter Retention Screw (2)
  • CV-Caterpillar V-Flange In (3)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (7)
  • Straight-Cylindrical (25)
  • Weldon (33)
排屑槽数量
排屑槽数量
  • 1 (1)
  • 10 (2)
  • 11 (1)
  • 12 (1)
  • 2 (16)
  • 3 (36)
  • 4 (22)
  • 5 (14)
  • 6 (4)
  • 7 (3)
  • 8 (3)
  • 9 (2)
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 1.575 in (13)
  • 1.75 in (3)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.165 in (1)
  • 2.244 in (2)
  • 2.48 in (3)
  • 2.5 in (3)
  • 2.539 in (4)
  • 2.559 in (3)
  • 2.953 in (2)
  • 3.0 in (1)
  • 3.531 in (1)
  • 3.543 in (2)
  • 3.781 in (2)
  • 3.938 in (2)
  • 3.976 in (2)
  • 4.01 in (1)
  • 4.03 in (4)
  • 4.213 in (2)
  • 4.28 in (2)
  • 4.331 in (4)
  • 4.37 in (6)
  • 4.51 in (2)
  • 4.53 in (5)
  • 4.78 in (1)
  • 4.961 in (1)
  • 5.281 in (1)
  • 5.551 in (2)
  • 5.687 in (3)
  • 5.69 in (1)
  • 5.945 in (1)
  • 6.5 in (1)
  • 6.694 in (3)
  • 7.5 in (1)
  • 7.875 in (4)
  • 8.0 in (3)
  • 10.0 in (4)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 40.0 mm (13)
  • 44.45 mm (3)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 55.0 mm (1)
  • 57.0 mm (2)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 64.5 mm (4)
  • 65.0 mm (3)
  • 75.0 mm (2)
  • 76.2 mm (1)
  • 89.676 mm (1)
  • 90.0 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (2)
  • 101.0 mm (2)
  • 101.851 mm (1)
  • 102.351 mm (4)
  • 107.0 mm (2)
  • 108.7 mm (2)
  • 110.0 mm (4)
  • 111.0 mm (6)
  • 114.551 mm (2)
  • 115.051 mm (5)
  • 121.4 mm (1)
  • 126.0 mm (1)
  • 134.125 mm (1)
  • 141.0 mm (2)
  • 144.451 mm (3)
  • 144.525 mm (1)
  • 151.0 mm (1)
  • 165.101 mm (1)
  • 170.0 mm (3)
  • 190.5 mm (1)
  • 200.0 mm (4)
  • 203.201 mm (3)
  • 254.0 mm (4)
总长 [L] Min 到 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.008 in (104)
  • 0.016 in (118)
  • 0.031 in (129)
  • 0.047 in (125)
  • 0.063 in (124)
  • 0.079 in (107)
  • 0.094 in (109)
  • 0.122 in (118)
  • 0.157 in (110)
刀尖半径 Min 到 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.2 mm (104)
  • 0.4 mm (118)
  • 0.8 mm (129)
  • 1.201 mm (125)
  • 1.6 mm (124)
  • 2.0 mm (107)
  • 2.375 mm (109)
  • 3.1 mm (118)
  • 4.0 mm (110)
刀尖半径 Min 到 刀尖半径 Max
application
切削刀具材质
切削刀具材质
  • KC410M (112)
  • KC422M (108)
  • KC520M (109)
  • KC522M (122)
  • KC725M (126)
  • KCK15 (107)
  • KCK20B (109)
  • KCPK30 (121)
  • KCPM20 (107)
  • KCPM40 (114)
  • KCSM30 (107)
  • KCSM40 (123)
刀具手式
刀具手式
  • R (105)
修光刃刀片
修光刃刀片
  • N (113)
最大坡铣角度
最大坡铣角度
  • 0.9 (1)
  • 1.2 (2)
  • 1.5 (4)
  • 1.9 (2)
  • 1.95 (1)
  • 2.0 (3)
  • 2.5 (11)
  • 3.4 (6)
  • 3.5 (5)
  • 4.8 (14)
  • 5.2 (8)
  • 5.5 (3)
  • 6.8 (11)
  • 6.9 (5)
  • 7.2 (4)
  • 10.2 (4)
  • 10.4 (3)
  • 10.5 (7)
  • 10.7 (1)
  • 10.9 (1)
  • 13.2 (1)
  • 16.6 (4)
  • 18.0 (1)
  • 18.5 (2)
  • 25.0 (1)
最大坡铣角度 Min 到 最大坡铣角度 Max
frontEnd
刀片形状
刀片形状
  • E-PARALLELOGRAM 70 (202)
  • X-PARALLELOGRAM 70 (121)
颈部直径
颈部直径
  • 1.159 in (3)
  • 1.211 in (1)
  • 1.24 in (4)
  • 1.48 in (1)
  • 1.555 in (1)
颈部直径 Min 到 颈部直径 Max
颈部直径
颈部直径
  • 29.451 mm (3)
  • 30.75 mm (1)
  • 31.5 mm (4)
  • 37.6 mm (1)
  • 39.5 mm (1)
颈部直径 Min 到 颈部直径 Max
中心切削
中心切削
insertGeometry
形状
形状
  • E-PARALLELOGRAM 70 (97)
  • X-PARALLELOGRAM 70 (16)
切削刃长度
切削刃长度
  • 14.851 mm (4)
  • 15.25 mm (9)
  • 15.275 mm (47)
  • 15.3 mm (6)
  • 17.425 mm (6)
切削刃长度 Min 到 切削刃长度 Max
切削刃长度
切削刃长度
  • 0.585 in (4)
  • 0.6 in (9)
  • 0.601 in (47)
  • 0.602 in (6)
  • 0.686 in (6)
切削刃长度 Min 到 切削刃长度 Max
断屑槽 CBMD
断屑槽 CBMD
  • GD (30)
  • GE (20)
  • HD (48)
  • LD (15)
切削刀具材料
切削刀具材料
  • H W (113)
公差等级
公差等级
  • C (27)
  • P (86)
backEnd
连接类型
连接类型
  • CYLINDRICAL (58)
  • SCREW-ON (7)
  • SHELL MILL (37)
  • TAPER SHANK (3)
系统规格
系统规格
  • CV40 (3)
后端直径
后端直径
  • 12.701 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 19.05 mm (7)
  • 19.1 mm (6)
  • 20.0 mm (3)
  • 21.0 mm (2)
  • 22.0 mm (6)
  • 25.0 mm (8)
  • 25.401 mm (15)
  • 27.0 mm (7)
  • 29.0 mm (4)
  • 31.75 mm (14)
  • 32.0 mm (19)
  • 38.1 mm (3)
  • 40.0 mm (4)
  • 44.45 mm (3)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.75 in (7)
  • 0.752 in (6)
  • 0.787 in (3)
  • 0.828 in (2)
  • 0.866 in (6)
  • 0.984 in (8)
  • 1.0 in (15)
  • 1.063 in (7)
  • 1.143 in (4)
  • 1.25 in (14)
  • 1.26 in (19)
  • 1.5 in (3)
  • 1.575 in (4)
  • 1.75 in (3)
后端直径 Min 到 后端直径 Max
No filters matching ""

Inserts Mill 1-14™

(113) Inserts Mill 1-14™

Cutters Mill 1-14™ • Metric

(56) Cutters Mill 1-14™ • Metric

Cutters Mill 1-14™ • Inch

(49) Cutters Mill 1-14™ • Inch
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?