欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

槽铣刀

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (375)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (366)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (366)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (366)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (366)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (368)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (375)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (375)
  • M 不锈钢 (370)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (370)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (370)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (370)
  • K 铸铁 (334)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (334)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (334)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (334)
  • N 非铁金属材料 (200)
    • N1
      铝型材 (200)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (200)
    • N3
      高硅铝合金 硅 > 12.2% (200)
  • S 高温合金 (363)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (317)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (317)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (317)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (363)
  • H 淬火材料 (139)
    • H1
      淬火材料 44-48 HRC (139)
应用
应用
  • Face Milling Face Milling (2)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (19)
  • Shoulder Milling Shoulder Milling (21)
  • Shoulder Square End Shoulder Square End (21)
  • Slot Milling Slot Milling (193)
  • Slot Side Slot Side (193)
  • Slot Square End Slot Square End (74)
  • Slot T Slot T (5)
切削直径
切削直径
  • 0.828 in (1)
  • 0.984 in (1)
  • 1.26 in (1)
  • 1.575 in (1)
  • 1.969 in (1)
  • 2.48 in (4)
  • 2.5 in (5)
  • 3.0 in (9)
  • 3.15 in (9)
  • 3.938 in (18)
  • 4.0 in (23)
  • 4.921 in (27)
  • 5.0 in (21)
  • 6.0 in (16)
  • 6.299 in (24)
  • 7.875 in (15)
  • 8.0 in (14)
  • 9.843 in (10)
  • 10.0 in (7)
  • 12.0 in (2)
  • 12.403 in (5)
切削直径 Min 到 切削直径 Max
切削直径
切削直径
  • 21.0 mm (1)
  • 25.0 mm (1)
  • 32.0 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (1)
  • 63.0 mm (4)
  • 63.5 mm (5)
  • 76.2 mm (9)
  • 80.0 mm (9)
  • 100.0 mm (18)
  • 101.601 mm (23)
  • 125.0 mm (27)
  • 127.0 mm (21)
  • 152.4 mm (16)
  • 160.0 mm (24)
  • 200.0 mm (15)
  • 203.201 mm (14)
  • 250.0 mm (10)
  • 254.0 mm (7)
  • 304.8 mm (2)
  • 315.0 mm (5)
切削直径 Min 到 切削直径 Max
最大切削直径
最大切削直径
  • 101.825 mm (2)
  • 101.9 mm (2)
  • 127.226 mm (1)
  • 127.301 mm (1)
  • 152.625 mm (1)
  • 152.701 mm (1)
  • 203.425 mm (1)
  • 203.476 mm (1)
最大切削直径 Min 到 最大切削直径 Max
最大切削直径
最大切削直径
  • 4.009 in (2)
  • 4.013 in (2)
  • 5.009 in (1)
  • 5.013 in (1)
  • 6.009 in (1)
  • 6.013 in (1)
  • 8.009 in (1)
  • 8.012 in (1)
最大切削直径 Min 到 最大切削直径 Max
切削长度
切削长度
  • 1.6 mm (8)
  • 2.2 mm (8)
  • 3.0 mm (14)
  • 4.0 mm (9)
  • 5.0 mm (1)
  • 6.0 mm (3)
  • 6.351 mm (7)
  • 7.926 mm (6)
  • 9.0 mm (1)
  • 9.525 mm (5)
  • 11.0 mm (1)
  • 11.701 mm (21)
  • 12.701 mm (5)
  • 14.0 mm (1)
  • 18.0 mm (15)
  • 18.776 mm (2)
  • 18.901 mm (3)
  • 19.826 mm (1)
  • 19.85 mm (2)
  • 20.651 mm (10)
  • 22.0 mm (1)
切削长度 Min 到 切削长度 Max
切削长度
切削长度
  • 0.063 in (8)
  • 0.088 in (8)
  • 0.119 in (14)
  • 0.157 in (9)
  • 0.197 in (1)
  • 0.237 in (3)
  • 0.25 in (7)
  • 0.312 in (6)
  • 0.354 in (1)
  • 0.375 in (5)
  • 0.433 in (1)
  • 0.461 in (21)
  • 0.5 in (5)
  • 0.551 in (1)
  • 0.709 in (15)
  • 0.739 in (2)
  • 0.744 in (3)
  • 0.781 in (3)
  • 0.814 in (10)
  • 0.866 in (1)
切削长度 Min 到 切削长度 Max
范围
范围
  • 1.143 in (1)
  • 1.26 in (1)
  • 1.496 in (1)
  • 1.782 in (1)
  • 1.792 in (1)
  • 1.821 in (1)
  • 1.969 in (13)
  • 2.0 in (3)
  • 2.011 in (12)
  • 2.039 in (1)
  • 2.053 in (1)
  • 2.067 in (1)
  • 2.083 in (1)
  • 2.093 in (2)
  • 2.1 in (1)
  • 2.362 in (1)
  • 2.415 in (1)
  • 2.43 in (1)
  • 2.445 in (1)
  • 2.463 in (1)
范围 Min 到 范围 Max
范围
范围
  • 29.0 mm (1)
  • 32.0 mm (1)
  • 38.0 mm (1)
  • 45.25 mm (1)
  • 45.5 mm (1)
  • 46.25 mm (1)
  • 50.0 mm (13)
  • 50.801 mm (3)
  • 51.051 mm (12)
  • 51.801 mm (1)
  • 52.151 mm (1)
  • 52.5 mm (1)
  • 52.901 mm (1)
  • 53.151 mm (2)
  • 53.35 mm (1)
  • 60.0 mm (1)
  • 61.35 mm (1)
  • 61.7 mm (1)
  • 62.1 mm (1)
  • 62.551 mm (1)
范围 Min 到 范围 Max
刀具切削刃角度
刀具切削刃角度
  • 90.0 (218)
刀具切削刃角度 Min 到 刀具切削刃角度 Max
连接类型
连接类型
  • 2 Key & Cutter Retention Screw (43)
  • 2 Key & Socket Head Cap Screw (59)
  • A-Socket Head Cap Screw (25)
  • B-Cutter Retention Screw (17)
  • C-Bolt Circle (5)
  • Weldon (5)
排屑槽数量
排屑槽数量
  • 1 (1)
  • 10 (6)
  • 11 (18)
  • 12 (7)
  • 13 (5)
  • 14 (12)
  • 15 (4)
  • 16 (2)
  • 17 (6)
  • 18 (1)
  • 19 (3)
  • 2 (4)
  • 24 (3)
  • 3 (6)
  • 4 (17)
  • 5 (29)
  • 6 (15)
  • 7 (24)
  • 8 (27)
  • 9 (24)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (151)
  • 2.0 (139)
  • 4.0 (253)
每个刀片的切削刃 Min 到 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 0.742 in (3)
  • 0.787 in (3)
  • 0.951 in (4)
  • 1.782 in (1)
  • 1.792 in (1)
  • 1.821 in (1)
  • 1.969 in (12)
  • 2.0 in (3)
  • 2.011 in (12)
  • 2.039 in (1)
  • 2.053 in (1)
  • 2.067 in (1)
  • 2.083 in (1)
  • 2.093 in (2)
  • 2.1 in (1)
  • 2.415 in (1)
  • 2.43 in (1)
  • 2.445 in (1)
  • 2.463 in (1)
  • 4.291 in (1)
  • 4.409 in (1)
  • 4.724 in (1)
  • 5.118 in (1)
  • 5.513 in (1)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 18.85 mm (3)
  • 20.0 mm (3)
  • 24.125 mm (4)
  • 45.25 mm (1)
  • 45.5 mm (1)
  • 46.25 mm (1)
  • 50.0 mm (12)
  • 50.801 mm (3)
  • 51.051 mm (12)
  • 51.801 mm (1)
  • 52.151 mm (1)
  • 52.5 mm (1)
  • 52.901 mm (1)
  • 53.151 mm (2)
  • 53.35 mm (1)
  • 61.35 mm (1)
  • 61.7 mm (1)
  • 62.1 mm (1)
  • 62.551 mm (1)
  • 109.0 mm (1)
  • 112.0 mm (1)
  • 120.0 mm (1)
  • 130.0 mm (1)
  • 140.0 mm (1)
总长 [L] Min 到 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.0 in (32)
  • 0.006 in (38)
  • 0.008 in (101)
  • 0.012 in (60)
  • 0.016 in (133)
  • 0.031 in (149)
  • 0.047 in (67)
  • 0.06 in (12)
  • 0.063 in (112)
  • 0.078 in (60)
  • 0.079 in (14)
  • 0.094 in (54)
  • 0.095 in (56)
  • 0.125 in (91)
  • 0.126 in (53)
  • 0.187 in (53)
  • 0.249 in (55)
  • 0.25 in (54)
刀尖半径 Min 到 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.0 mm (32)
  • 0.151 mm (38)
  • 0.2 mm (101)
  • 0.301 mm (60)
  • 0.4 mm (133)
  • 0.8 mm (149)
  • 1.201 mm (67)
  • 1.5 mm (12)
  • 1.6 mm (112)
  • 1.975 mm (60)
  • 2.0 mm (14)
  • 2.375 mm (54)
  • 2.401 mm (56)
  • 3.176 mm (91)
  • 3.2 mm (53)
  • 4.75 mm (53)
  • 6.325 mm (55)
  • 6.351 mm (54)
刀尖半径 Min 到 刀尖半径 Max
刀尖倒角
刀尖倒角
  • 0.0 mm (438)
刀尖倒角 Min 到 刀尖倒角 Max
刀尖倒角
刀尖倒角
  • 0.0 in (438)
刀尖倒角 Min 到 刀尖倒角 Max
application
切削刀具材质
切削刀具材质
  • K110M (5)
  • K2885 (25)
  • K8735 (19)
  • KC410M (60)
  • KC505M (7)
  • KC510M (53)
  • KC520M (110)
  • KC522M (128)
  • KC525M (41)
  • KC710 (25)
  • KC715M (48)
  • KC725M (140)
  • KC730 (25)
  • KC730M (8)
  • KC735M (141)
  • KC792M (66)
  • KC915M (53)
  • KC920M (78)
  • KC925M (116)
  • KC930M (43)
  • KC935M (60)
  • KCK15 (108)
  • KCK20B (110)
  • KCPK30 (238)
  • KCPM20 (57)
  • KCPM40 (200)
  • KCSM30 (53)
  • KCSM40 (60)
  • KCU25 (92)
  • KMF (43)
  • KTPK20 (42)
  • KUC20M (41)
  • KUC30M (41)
  • KY1335 (41)
  • KY3500 (53)
  • X500 (53)
刀具手式
刀具手式
  • L (12)
  • N (160)
  • R (42)
修光刃刀片
修光刃刀片
  • N (224)
frontEnd
夹具样式
夹具样式
  • S (4)
切削宽度
切削宽度
  • 0.063 in (16)
  • 0.079 in (8)
  • 0.088 in (16)
  • 0.089 in (1)
  • 0.095 in (8)
  • 0.098 in (13)
  • 0.119 in (18)
  • 0.12 in (3)
  • 0.125 in (19)
  • 0.157 in (20)
  • 0.159 in (4)
  • 0.188 in (12)
  • 0.197 in (15)
  • 0.237 in (25)
  • 0.239 in (1)
  • 0.25 in (25)
  • 0.312 in (6)
  • 0.315 in (5)
  • 0.354 in (1)
  • 0.375 in (5)
  • 0.394 in (3)
  • 0.433 in (1)
  • 0.473 in (1)
  • 0.5 in (5)
  • 0.551 in (1)
  • 0.709 in (15)
  • 0.739 in (4)
  • 0.744 in (1)
  • 0.781 in (3)
  • 0.814 in (10)
  • 0.866 in (1)
切削宽度 Min 到 切削宽度 Max
切削宽度
切削宽度
  • 1.6 mm (16)
  • 2.0 mm (8)
  • 2.2 mm (16)
  • 2.25 mm (1)
  • 2.401 mm (8)
  • 2.5 mm (13)
  • 3.0 mm (18)
  • 3.051 mm (3)
  • 3.176 mm (19)
  • 4.0 mm (20)
  • 4.05 mm (4)
  • 4.775 mm (12)
  • 5.0 mm (15)
  • 6.0 mm (25)
  • 6.051 mm (1)
  • 6.351 mm (25)
  • 7.926 mm (6)
  • 8.0 mm (5)
  • 9.0 mm (1)
  • 9.525 mm (5)
  • 10.0 mm (3)
  • 11.0 mm (1)
  • 12.0 mm (1)
  • 12.701 mm (5)
  • 14.0 mm (1)
  • 18.0 mm (15)
  • 18.776 mm (4)
  • 18.901 mm (1)
  • 19.826 mm (3)
  • 20.651 mm (10)
  • 22.0 mm (1)
切削宽度 Min 到 切削宽度 Max
刀片形状
刀片形状
  • L-RECTANGLE ON EDGE 90 (104)
  • PRISMATIC (182)
  • S-SQUARE 90 (156)
刀夹规格
刀夹规格
  • 18N - KSSM Slotting (2)
  • 20W - KSSM Slotting (2)
最大切削深度
最大切削深度
  • 0.208 in (1)
  • 0.246 in (1)
  • 0.325 in (1)
  • 0.376 in (10)
  • 0.384 in (1)
  • 0.463 in (1)
  • 0.56 in (2)
  • 0.591 in (3)
  • 0.594 in (1)
  • 0.625 in (2)
  • 0.63 in (3)
  • 0.828 in (4)
  • 0.866 in (4)
  • 0.875 in (8)
  • 0.904 in (1)
  • 0.906 in (1)
  • 0.935 in (1)
  • 0.943 in (4)
  • 0.967 in (1)
  • 0.972 in (3)
  • 0.997 in (1)
  • 1.012 in (3)
  • 1.024 in (1)
  • 1.029 in (1)
  • 1.051 in (1)
  • 1.06 in (1)
  • 1.063 in (9)
  • 1.094 in (4)
  • 1.131 in (1)
  • 1.156 in (6)
  • 1.181 in (1)
  • 1.256 in (6)
  • 1.268 in (5)
  • 1.331 in (1)
  • 1.339 in (4)
  • 1.375 in (4)
  • 1.379 in (4)
  • 1.405 in (1)
  • 1.435 in (1)
  • 1.438 in (2)
  • 1.467 in (1)
  • 1.504 in (6)
  • 1.532 in (6)
  • 1.56 in (1)
  • 1.575 in (3)
  • 1.693 in (3)
  • 1.709 in (3)
  • 1.747 in (1)
  • 1.75 in (1)
  • 1.809 in (1)
  • 1.811 in (3)
  • 1.831 in (1)
  • 1.844 in (1)
  • 1.851 in (2)
  • 1.857 in (1)
  • 1.879 in (4)
  • 1.917 in (1)
  • 2.008 in (5)
  • 2.028 in (4)
  • 2.029 in (1)
  • 2.055 in (1)
  • 2.069 in (2)
  • 2.102 in (2)
  • 2.25 in (1)
  • 2.299 in (2)
  • 2.362 in (3)
  • 2.536 in (2)
  • 2.539 in (2)
  • 2.543 in (1)
  • 2.566 in (4)
  • 2.567 in (1)
  • 2.581 in (2)
  • 2.719 in (1)
  • 2.75 in (2)
  • 2.781 in (1)
  • 2.795 in (5)
  • 2.875 in (1)
  • 3.25 in (2)
  • 3.313 in (1)
  • 3.346 in (1)
  • 3.516 in (1)
  • 3.524 in (1)
  • 3.543 in (1)
  • 3.559 in (1)
  • 3.565 in (2)
  • 3.567 in (1)
  • 3.579 in (2)
  • 3.594 in (1)
  • 3.605 in (1)
  • 3.781 in (3)
  • 4.508 in (3)
  • 4.516 in (1)
最大切削深度 Min 到 最大切削深度 Max
最大切削深度
最大切削深度
  • 5.25 mm (1)
  • 6.25 mm (1)
  • 8.25 mm (1)
  • 9.55 mm (10)
  • 9.75 mm (1)
  • 11.75 mm (1)
  • 14.226 mm (2)
  • 15.0 mm (3)
  • 15.076 mm (1)
  • 15.875 mm (2)
  • 16.0 mm (3)
  • 21.0 mm (4)
  • 22.0 mm (4)
  • 22.225 mm (8)
  • 22.951 mm (1)
  • 23.0 mm (1)
  • 23.75 mm (1)
  • 23.925 mm (4)
  • 24.55 mm (1)
  • 24.701 mm (3)
  • 25.326 mm (1)
  • 25.701 mm (3)
  • 26.0 mm (1)
  • 26.125 mm (1)
  • 26.701 mm (1)
  • 26.925 mm (1)
  • 27.0 mm (9)
  • 27.776 mm (4)
  • 28.701 mm (1)
  • 29.35 mm (6)
  • 30.0 mm (1)
  • 31.901 mm (6)
  • 32.2 mm (5)
  • 33.801 mm (1)
  • 34.0 mm (4)
  • 34.926 mm (4)
  • 35.0 mm (4)
  • 35.65 mm (1)
  • 36.45 mm (1)
  • 36.525 mm (2)
  • 37.25 mm (1)
  • 38.2 mm (6)
  • 38.901 mm (6)
  • 39.625 mm (1)
  • 40.0 mm (3)
  • 43.0 mm (3)
  • 43.401 mm (3)
  • 44.375 mm (1)
  • 44.45 mm (1)
  • 45.95 mm (1)
  • 46.0 mm (3)
  • 46.5 mm (1)
  • 46.85 mm (1)
  • 47.026 mm (2)
  • 47.176 mm (1)
  • 47.7 mm (4)
  • 48.7 mm (1)
  • 51.0 mm (5)
  • 51.5 mm (4)
  • 51.526 mm (1)
  • 52.2 mm (1)
  • 52.551 mm (2)
  • 53.401 mm (2)
  • 57.151 mm (1)
  • 58.401 mm (2)
  • 60.0 mm (3)
  • 64.425 mm (2)
  • 64.5 mm (2)
  • 64.575 mm (1)
  • 65.175 mm (4)
  • 65.2 mm (1)
  • 65.55 mm (2)
  • 69.05 mm (1)
  • 69.851 mm (2)
  • 70.65 mm (1)
  • 71.0 mm (5)
  • 73.025 mm (1)
  • 82.551 mm (2)
  • 84.125 mm (1)
  • 85.0 mm (1)
  • 89.301 mm (1)
  • 89.5 mm (1)
  • 89.976 mm (1)
  • 90.4 mm (1)
  • 90.551 mm (2)
  • 90.575 mm (1)
  • 90.9 mm (2)
  • 91.275 mm (1)
  • 91.575 mm (1)
  • 96.0 mm (3)
  • 114.5 mm (3)
  • 114.7 mm (1)
最大切削深度 Min 到 最大切削深度 Max
最大切削刀片深度
最大切削刀片深度
  • 7.601 mm (13)
  • 9.175 mm (11)
  • 11.55 mm (13)
  • 12.675 mm (15)
  • 12.75 mm (15)
  • 14.5 mm (15)
  • 14.525 mm (12)
  • 14.75 mm (13)
最大切削刀片深度 Min 到 最大切削刀片深度 Max
最大切削刀片深度
最大切削刀片深度
  • 0.299 in (13)
  • 0.361 in (11)
  • 0.455 in (13)
  • 0.499 in (15)
  • 0.502 in (15)
  • 0.572 in (15)
  • 0.573 in (12)
  • 0.581 in (13)
最大切削刀片深度 Min 到 最大切削刀片深度 Max
颈部直径
颈部直径
  • 0.414 in (1)
  • 0.492 in (1)
  • 0.61 in (1)
  • 0.807 in (1)
  • 1.043 in (1)
颈部直径 Min 到 颈部直径 Max
颈部直径
颈部直径
  • 10.5 mm (1)
  • 12.5 mm (1)
  • 15.5 mm (1)
  • 20.5 mm (1)
  • 26.5 mm (1)
颈部直径 Min 到 颈部直径 Max
中心切削
中心切削
insertGeometry
形状
形状
  • L-RECTANGLE ON EDGE 90 (65)
  • PRISMATIC (65)
  • S-SQUARE 90 (94)
刀片 IC 尺寸
刀片 IC 尺寸
  • 6.351 mm (1)
  • 8.0 mm (2)
  • 9.525 mm (1)
  • 12.701 mm (91)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
刀片 IC 尺寸
刀片 IC 尺寸
  • 0.25 in (1)
  • 0.315 in (2)
  • 0.375 in (1)
  • 0.5 in (91)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
刀座规格
刀座规格
  • 1 (3)
  • 12 (3)
  • 16 (6)
  • 2 (3)
  • 21 (11)
  • 27 (9)
  • 3 (3)
  • 34 (8)
  • 4 (3)
  • 42 (3)
  • 51 (12)
  • 6 (1)
切削刃长度
切削刃长度
  • 3.5 mm (7)
  • 4.0 mm (12)
  • 4.5 mm (24)
  • 5.0 mm (8)
  • 5.5 mm (10)
  • 6.0 mm (4)
  • 6.351 mm (1)
  • 8.0 mm (2)
  • 12.701 mm (91)
切削刃长度 Min 到 切削刃长度 Max
切削刃长度
切削刃长度
  • 0.138 in (7)
  • 0.157 in (12)
  • 0.177 in (24)
  • 0.197 in (8)
  • 0.217 in (10)
  • 0.237 in (4)
  • 0.25 in (1)
  • 0.315 in (2)
  • 0.5 in (91)
切削刃长度 Min 到 切削刃长度 Max
断屑槽 CBMD
断屑槽 CBMD
  • GB2 (61)
  • GP (8)
  • LD (8)
  • LD2 (13)
  • LE (7)
切削刀具材料
切削刀具材料
  • H T (1)
  • H W (223)
公差等级
公差等级
  • C (28)
  • E (113)
  • M (5)
  • P (13)
backEnd
连接类型
连接类型
  • ARBOR (162)
  • CYLINDRICAL (5)
  • SHELL MILL (47)
后端直径
后端直径
  • 15.875 mm (9)
  • 15.9 mm (1)
  • 16.0 mm (9)
  • 19.075 mm (2)
  • 22.0 mm (15)
  • 25.0 mm (2)
  • 25.401 mm (21)
  • 27.0 mm (5)
  • 31.75 mm (8)
  • 31.776 mm (2)
  • 31.8 mm (16)
  • 32.0 mm (26)
  • 38.1 mm (18)
  • 38.125 mm (2)
  • 40.0 mm (43)
  • 50.0 mm (10)
  • 50.801 mm (17)
  • 60.0 mm (7)
  • 63.5 mm (1)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.625 in (9)
  • 0.626 in (1)
  • 0.63 in (9)
  • 0.751 in (2)
  • 0.866 in (15)
  • 0.984 in (2)
  • 1.0 in (21)
  • 1.063 in (5)
  • 1.25 in (8)
  • 1.252 in (18)
  • 1.26 in (26)
  • 1.5 in (18)
  • 1.502 in (2)
  • 1.575 in (43)
  • 1.969 in (10)
  • 2.0 in (17)
  • 2.362 in (7)
  • 2.5 in (1)
后端直径 Min 到 后端直径 Max
No filters matching ""

KSSM 铣槽刀具 • IC 12

(146) KSSM 铣槽刀具 • IC 12

KNS® 铣槽刀具

(126) KNS® 铣槽刀具

LN 刀具

(104) LN 刀具

KVNS A2™ 槽铣刀具

(58) KVNS A2™ 槽铣刀具

KTMS • 可转位 T 形槽铣刀

(10) KTMS • 可转位 T 形槽铣刀
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?