欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

TMS

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (104)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (104)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (104)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (104)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (104)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (104)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (104)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (104)
  • M 不锈钢 (104)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (104)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (104)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (104)
  • K 铸铁 (104)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (104)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (104)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (104)
  • S 高温合金 (51)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (51)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (51)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (51)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (51)
  • H 淬火材料 (84)
    • H1
      淬火材料 44-48 HRC (84)
应用
应用
  • ID Thread Turning ID Thread Turning (59)
  • OD Thread Turning OD Thread Turning (32)
  • Thread Milling Thread Milling (37)
  • Threading Threading (37)
切削直径
切削直径
  • 0.354 in (4)
  • 0.39 in (1)
  • 0.399 in (1)
  • 0.45 in (2)
  • 0.453 in (2)
  • 0.61 in (3)
  • 0.669 in (1)
  • 0.67 in (2)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.79 in (1)
  • 0.866 in (1)
  • 0.87 in (1)
  • 0.984 in (1)
  • 1.024 in (2)
  • 1.18 in (3)
  • 1.181 in (2)
  • 1.379 in (1)
  • 1.457 in (2)
  • 1.46 in (1)
  • 1.655 in (2)
  • 1.811 in (1)
切削直径 Min 到 切削直径 Max
切削直径
切削直径
  • 9.0 mm (4)
  • 9.9 mm (1)
  • 10.125 mm (1)
  • 11.425 mm (2)
  • 11.5 mm (2)
  • 15.5 mm (3)
  • 17.0 mm (1)
  • 17.026 mm (2)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 20.076 mm (1)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 25.0 mm (1)
  • 26.0 mm (2)
  • 29.975 mm (3)
  • 30.0 mm (2)
  • 35.0 mm (1)
  • 37.0 mm (2)
  • 37.075 mm (1)
  • 42.0 mm (2)
  • 46.0 mm (1)
切削直径 Min 到 切削直径 Max
切削长度
切削长度
  • 10.4 mm (4)
  • 10.925 mm (4)
  • 11.0 mm (3)
  • 16.0 mm (13)
  • 26.925 mm (5)
  • 27.0 mm (6)
  • 38.5 mm (2)
切削长度 Min 到 切削长度 Max
切削长度
切削长度
  • 0.41 in (4)
  • 0.43 in (4)
  • 0.433 in (3)
  • 0.63 in (13)
  • 1.06 in (5)
  • 1.063 in (6)
  • 1.516 in (2)
切削长度 Min 到 切削长度 Max
螺纹类型
螺纹类型
  • BSPT (2)
  • BSW (48)
  • M (61)
  • NPS (15)
  • NPT (27)
  • NPTF (23)
  • UN (42)
范围
范围
  • 0.472 in (1)
  • 0.473 in (3)
  • 0.61 in (2)
  • 0.669 in (2)
  • 0.787 in (1)
  • 0.79 in (1)
  • 0.807 in (1)
  • 0.866 in (2)
  • 0.87 in (2)
  • 0.906 in (1)
  • 0.909 in (1)
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.341 in (1)
  • 1.575 in (1)
  • 1.68 in (1)
  • 1.69 in (1)
  • 1.693 in (2)
  • 1.77 in (1)
  • 1.772 in (1)
  • 2.031 in (2)
  • 2.047 in (1)
  • 2.165 in (1)
  • 2.283 in (1)
  • 3.531 in (1)
  • 3.622 in (1)
  • 3.858 in (1)
  • 3.938 in (1)
  • 4.0 in (1)
范围 Min 到 范围 Max
范围
范围
  • 11.951 mm (1)
  • 12.0 mm (3)
  • 15.5 mm (2)
  • 17.0 mm (2)
  • 20.0 mm (1)
  • 20.076 mm (1)
  • 20.5 mm (1)
  • 22.0 mm (2)
  • 22.1 mm (2)
  • 23.0 mm (1)
  • 23.1 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 34.051 mm (1)
  • 40.0 mm (1)
  • 42.676 mm (1)
  • 42.926 mm (1)
  • 43.0 mm (2)
  • 44.95 mm (1)
  • 45.0 mm (1)
  • 51.551 mm (2)
  • 52.0 mm (1)
  • 55.0 mm (1)
  • 58.0 mm (1)
  • 89.65 mm (1)
  • 92.0 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (1)
范围 Min 到 范围 Max
刀具切削刃角度
刀具切削刃角度
  • 90.0 (20)
刀具切削刃角度 Min 到 刀具切削刃角度 Max
连接类型
连接类型
  • Weldon (37)
排屑槽数量
排屑槽数量
  • 1 (32)
  • 2 (5)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (30)
  • 2.0 (94)
每个刀片的切削刃 Min 到 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 2.717 in (1)
  • 2.721 in (1)
  • 2.75 in (1)
  • 2.757 in (1)
  • 3.031 in (1)
  • 3.12 in (1)
  • 3.15 in (1)
  • 3.301 in (1)
  • 3.307 in (1)
  • 3.346 in (2)
  • 3.38 in (1)
  • 3.42 in (1)
  • 3.5 in (1)
  • 3.543 in (1)
  • 3.56 in (2)
  • 3.583 in (1)
  • 3.74 in (1)
  • 3.75 in (1)
  • 3.858 in (1)
  • 3.938 in (1)
  • 4.021 in (1)
  • 4.331 in (1)
  • 4.38 in (2)
  • 4.529 in (1)
  • 4.65 in (1)
  • 4.724 in (2)
  • 4.921 in (1)
  • 5.0 in (1)
  • 5.88 in (1)
  • 5.906 in (1)
  • 6.299 in (1)
  • 6.33 in (1)
  • 6.694 in (1)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 69.0 mm (1)
  • 69.101 mm (1)
  • 69.851 mm (1)
  • 70.0 mm (1)
  • 77.0 mm (1)
  • 79.25 mm (1)
  • 80.0 mm (1)
  • 83.825 mm (1)
  • 84.0 mm (1)
  • 85.0 mm (2)
  • 85.851 mm (1)
  • 86.875 mm (1)
  • 88.9 mm (1)
  • 90.0 mm (1)
  • 90.426 mm (2)
  • 91.0 mm (1)
  • 95.0 mm (1)
  • 95.25 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 102.101 mm (1)
  • 110.0 mm (1)
  • 111.25 mm (2)
  • 115.0 mm (1)
  • 118.101 mm (1)
  • 120.0 mm (2)
  • 125.0 mm (1)
  • 127.0 mm (1)
  • 149.35 mm (1)
  • 150.0 mm (1)
  • 160.0 mm (1)
  • 160.775 mm (1)
  • 170.0 mm (1)
总长 [L] Min 到 总长 [L] Max
application
切削刀具材质
切削刀具材质
  • KC610M (51)
  • KC620M (37)
  • KC635M (84)
刀具手式
刀具手式
  • R (37)
修光刃刀片
修光刃刀片
  • N (67)
锪沉孔角度
锪沉孔角度
  • 27.5 (7)
  • 30.0 (40)
锪沉孔角度 Min 到 锪沉孔角度 Max
frontEnd
切削宽度
切削宽度
  • 0.33 in (1)
  • 0.34 in (1)
  • 0.351 in (3)
  • 0.36 in (1)
  • 0.37 in (1)
  • 0.38 in (3)
  • 0.39 in (5)
  • 0.4 in (1)
  • 0.411 in (1)
  • 0.52 in (3)
  • 0.55 in (5)
  • 0.56 in (3)
  • 0.571 in (7)
  • 0.58 in (4)
  • 0.59 in (4)
  • 0.709 in (1)
  • 0.909 in (3)
  • 0.91 in (1)
  • 0.928 in (5)
  • 0.941 in (1)
  • 0.946 in (8)
  • 0.958 in (2)
  • 0.965 in (1)
  • 0.988 in (2)
切削宽度 Min 到 切削宽度 Max
切削宽度
切削宽度
  • 8.375 mm (1)
  • 8.625 mm (1)
  • 8.9 mm (3)
  • 9.15 mm (1)
  • 9.4 mm (1)
  • 9.65 mm (3)
  • 9.9 mm (5)
  • 10.15 mm (1)
  • 10.425 mm (1)
  • 13.201 mm (3)
  • 13.976 mm (5)
  • 14.226 mm (3)
  • 14.476 mm (7)
  • 14.726 mm (4)
  • 14.976 mm (4)
  • 18.0 mm (1)
  • 23.1 mm (3)
  • 23.125 mm (1)
  • 23.576 mm (5)
  • 23.875 mm (1)
  • 24.0 mm (8)
  • 24.3 mm (2)
  • 24.5 mm (1)
  • 25.1 mm (2)
切削宽度 Min 到 切削宽度 Max
刀片形状
刀片形状
  • TM-RECTANGLE THREAD MILL 90 (20)
  • TM-TRIANGLE THREAD MILL 60 (84)
Thread TPI
Thread TPI
  • 4.5 (2)
  • 6.0 (11)
  • 7.0 (11)
  • 8.0 (11)
  • 9.0 (11)
  • 10.0 (11)
  • 11.0 (30)
  • 11.5 (18)
  • 12.0 (26)
  • 14.0 (44)
  • 16.0 (34)
  • 18.0 (29)
  • 19.0 (25)
  • 20.0 (27)
  • 24.0 (23)
  • 27.0 (14)
  • 28.0 (7)
  • 32.0 (14)
Thread TPI Min 到 Thread TPI Max
螺纹螺距
螺纹螺距
  • 0.5 mm (7)
  • 0.75 mm (18)
  • 1.0 mm (29)
  • 1.25 mm (25)
  • 1.5 mm (41)
  • 1.75 mm (14)
  • 2.0 mm (28)
  • 2.5 mm (13)
  • 3.0 mm (14)
  • 3.5 mm (12)
  • 4.0 mm (11)
  • 4.5 mm (11)
  • 5.0 mm (2)
螺纹螺距 Min 到 螺纹螺距 Max
螺纹螺距
螺纹螺距
  • 0.02 in (7)
  • 0.03 in (18)
  • 0.039 in (29)
  • 0.049 in (25)
  • 0.06 in (41)
  • 0.069 in (14)
  • 0.079 in (28)
  • 0.098 in (13)
  • 0.119 in (14)
  • 0.138 in (12)
  • 0.157 in (11)
  • 0.177 in (11)
  • 0.197 in (2)
螺纹螺距 Min 到 螺纹螺距 Max
颈部直径
颈部直径
  • 0.268 in (2)
  • 0.29 in (1)
  • 0.291 in (1)
  • 0.351 in (2)
  • 0.48 in (1)
  • 0.49 in (1)
  • 0.492 in (1)
  • 0.535 in (1)
  • 0.59 in (1)
  • 0.591 in (1)
  • 0.654 in (1)
  • 0.732 in (1)
  • 0.748 in (1)
  • 0.886 in (1)
  • 0.941 in (1)
  • 0.946 in (2)
  • 1.063 in (1)
  • 1.22 in (2)
  • 1.417 in (1)
  • 1.496 in (1)
颈部直径 Min 到 颈部直径 Max
颈部直径
颈部直径
  • 6.801 mm (2)
  • 7.375 mm (1)
  • 7.4 mm (1)
  • 8.9 mm (2)
  • 12.201 mm (1)
  • 12.451 mm (1)
  • 12.5 mm (1)
  • 13.601 mm (1)
  • 14.976 mm (1)
  • 15.0 mm (1)
  • 16.6 mm (1)
  • 18.6 mm (1)
  • 19.0 mm (1)
  • 22.5 mm (1)
  • 23.875 mm (1)
  • 24.0 mm (2)
  • 27.0 mm (1)
  • 31.0 mm (2)
  • 36.0 mm (1)
  • 38.0 mm (1)
颈部直径 Min 到 颈部直径 Max
insertGeometry
形状
形状
  • TM-RECTANGLE THREAD MILL 90 (20)
  • TM-TRIANGLE THREAD MILL 60 (47)
刀片 IC 尺寸
刀片 IC 尺寸
  • 6.0 mm (6)
  • 6.351 mm (11)
  • 9.525 mm (26)
  • 12.701 mm (1)
  • 15.875 mm (3)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
刀片 IC 尺寸
刀片 IC 尺寸
  • 0.237 in (6)
  • 0.25 in (11)
  • 0.375 in (26)
  • 0.5 in (1)
  • 0.625 in (3)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
切削刀具材料
切削刀具材料
  • H W (67)
backEnd
连接类型
连接类型
  • CYLINDRICAL (37)
后端直径
后端直径
  • 12.0 mm (2)
  • 12.701 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (3)
  • 19.05 mm (6)
  • 20.0 mm (5)
  • 25.0 mm (5)
  • 25.401 mm (5)
  • 31.75 mm (2)
  • 32.0 mm (4)
  • 40.0 mm (1)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.473 in (2)
  • 0.5 in (2)
  • 0.625 in (2)
  • 0.63 in (3)
  • 0.75 in (6)
  • 0.787 in (5)
  • 0.984 in (5)
  • 1.0 in (5)
  • 1.25 in (2)
  • 1.26 in (4)
  • 1.575 in (1)
后端直径 Min 到 后端直径 Max
No filters matching ""

刀片

(67) 刀片

平行螺纹铣刀

(25) 平行螺纹铣刀

锥形螺纹铣刀

(12) 锥形螺纹铣刀
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?