Beyond Evolution

选择筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P (943)
    • P0
      低碳钢,长切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (943)
    • P1
      低碳钢、短切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (943)
    • P2
      中碳钢和高碳钢 C < .25%;<220 HB;<25 HRC;>530 N/mm^2 UTS (943)
    • P3
      合金钢和工具钢 C > .25%;<330 HB;<35 HRC;600-850 N/mm^2 UTS (943)
    • P4
      合金钢和工具钢 C > .25%;350-420 HB;35-43 HRC;850-1400 N/mm^2 UTS (943)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB;<35 HRC;600-900 N/mm^2 UTS (943)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB;35-43 HRC;900-2400 N/mm^2 UTS (943)
  • M 不锈钢 (782)
    • M1
      奥氏体不锈钢 130-200 HB;<600 N/mm^2 UTS (782)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB;<25 HRC; >600 N/mm^2 UTS (782)
    • M3
      双相不锈钢 135-275 HB;<30 HRC; 500-1200 N/mm^2 UTS (782)
  • K 铸铁 (943)
    • K1
      灰口铸铁 120-290 HB;<32 HRC; 125-500 N/mm^2 UTS (943)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB;<28 HRC; <600 N/mm^2 UTS (943)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB;<43 HRC; >600 N/mm^2 UTS (943)
  • N 非铁金属材料 (811)
    • N1
      铝型材 (811)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (782)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (811)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (782)
    • N6
      碳、石墨复合材料、CFRP (782)
  • S 高温合金 (811)
    • S1
      铁基耐热合金 160-260 HB;25-48 HRC;500-1200 N/mm^2 UTS (811)
    • S2
      钴基耐热合金 250-450 HB;25-48 HRC;1000-1450 N/mm^2 UTS (811)
    • S3
      镍基耐热合金 160-450 HB;<48 HRC; 600-1700 N/mm^2 UTS (811)
    • S4
      钛和钛合金 300-400 HB;33-43 HRC;900-1600 N/mm^2 UTS (811)
  • H 淬火材料 (648)
    • H1
      淬火材料 44-48 HRC (648)
    • H2
      淬火材料 48-55 HRC (648)
选择 First Choice
  • BR (16)
  • CN (187)
  • DE (197)
  • GB (106)
  • IN (21)
  • SG (78)
  • US (257)
应用
应用
  • Back Boring Back Boring (509)
  • Boring Boring (509)
  • CRT Profiling CRT Profiling (2)
  • Cut-Off Cut-Off (667)
  • Deep Grooving Deep Grooving (38)
  • Face Grooving Face Grooving (512)
  • Facing Facing (517)
  • Grooving Grooving (846)
  • ID Facing ID Facing (509)
  • ID Grooving ID Grooving (580)
  • Multiple Direction Cutting Multiple Direction Cutting (95)
  • Plunge Turning Plunge Turning (520)
  • Profiling Profiling (492)
  • Turning Turning (557)
切削条件
切削条件
  • Heavily Interrupted Cut (640)
  • Lightly Interrupted Cut (841)
  • Smooth Cut (972)
  • Varying Depth of Cut (841)
刀具切削刃角度
刀具切削刃角度
  • 45.0 (8)
  • 90.0 (455)
刀具切削刃角度 Min 刀具切削刃角度 Max
连接类型
连接类型
  • Boring Bar Shank (52)
  • Cutoff Support Blade A1-A3 (49)
  • Toolholder (320)
每个刀片的切削刃
每个刀片的切削刃
  • 0.0 (1)
  • 1.0 (930)
每个刀片的切削刃 Min 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 0.795 in (1)
  • 0.992 in (2)
  • 1.881 in (10)
  • 1.954 in (4)
  • 2.037 in (8)
  • 2.274 in (4)
  • 2.347 in (4)
  • 2.431 in (6)
  • 2.584 in (2)
  • 2.668 in (4)
  • 3.553 in (3)
  • 4.341 in (21)
  • 4.5 in (86)
  • 4.921 in (96)
  • 4.931 in (4)
  • 5.327 in (2)
  • 5.348 in (2)
  • 5.372 in (4)
  • 5.394 in (4)
  • 5.463 in (2)
  • 5.508 in (6)
  • 5.906 in (60)
  • 5.912 in (1)
  • 5.915 in (17)
  • 5.961 in (6)
  • 6.0 in (76)
  • 6.114 in (2)
  • 6.136 in (2)
  • 6.25 in (2)
  • 6.372 in (2)
  • 6.394 in (2)
  • 6.694 in (26)
  • 6.703 in (2)
  • 7.0 in (10)
  • 7.087 in (12)
  • 7.875 in (18)
  • 9.843 in (8)
  • 10.236 in (2)
总长 [L] Min 总长 [L] Max
总长 [L]
总长 [L]
  • 20.201 mm (1)
  • 25.201 mm (2)
  • 47.75 mm (10)
  • 49.625 mm (4)
  • 51.75 mm (8)
  • 57.75 mm (4)
  • 59.625 mm (4)
  • 61.75 mm (6)
  • 65.625 mm (2)
  • 67.75 mm (4)
  • 90.25 mm (3)
  • 110.25 mm (21)
  • 114.301 mm (86)
  • 125.0 mm (96)
  • 125.25 mm (4)
  • 135.3 mm (2)
  • 135.85 mm (2)
  • 136.451 mm (4)
  • 137.0 mm (4)
  • 138.75 mm (2)
  • 139.9 mm (6)
  • 150.0 mm (60)
  • 150.15 mm (1)
  • 150.25 mm (17)
  • 151.4 mm (6)
  • 152.4 mm (76)
  • 155.3 mm (2)
  • 155.851 mm (2)
  • 158.75 mm (2)
  • 161.851 mm (2)
  • 162.4 mm (2)
  • 170.0 mm (26)
  • 170.25 mm (2)
  • 177.8 mm (10)
  • 180.0 mm (12)
  • 200.0 mm (18)
  • 250.0 mm (8)
  • 260.0 mm (2)
总长 [L] Min 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.0 in (26)
  • 0.006 in (26)
  • 0.008 in (424)
  • 0.012 in (89)
  • 0.016 in (400)
  • 0.031 in (292)
  • 0.039 in (107)
  • 0.041 in (113)
  • 0.046 in (25)
  • 0.047 in (186)
  • 0.06 in (100)
  • 0.061 in (107)
  • 0.063 in (104)
  • 0.065 in (105)
  • 0.079 in (81)
  • 0.081 in (88)
  • 0.094 in (85)
  • 0.096 in (87)
  • 0.098 in (51)
  • 0.1 in (58)
  • 0.119 in (46)
  • 0.12 in (53)
  • 0.125 in (52)
  • 0.128 in (48)
  • 0.156 in (31)
  • 0.157 in (26)
  • 0.158 in (29)
  • 0.159 in (33)
刀尖半径 Min 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.0 mm (26)
  • 0.151 mm (26)
  • 0.2 mm (424)
  • 0.301 mm (89)
  • 0.4 mm (400)
  • 0.8 mm (292)
  • 1.0 mm (107)
  • 1.05 mm (113)
  • 1.175 mm (25)
  • 1.201 mm (186)
  • 1.5 mm (100)
  • 1.55 mm (107)
  • 1.6 mm (104)
  • 1.651 mm (105)
  • 2.0 mm (81)
  • 2.051 mm (88)
  • 2.375 mm (85)
  • 2.45 mm (87)
  • 2.5 mm (51)
  • 2.551 mm (58)
  • 3.0 mm (46)
  • 3.051 mm (53)
  • 3.176 mm (52)
  • 3.25 mm (48)
  • 3.95 mm (31)
  • 4.0 mm (26)
  • 4.025 mm (29)
  • 4.05 mm (33)
刀尖半径 Min 刀尖半径 Max
刀尖倒角
刀尖倒角
  • 0.0 mm (552)
刀尖倒角 Min 刀尖倒角 Max
刀尖倒角
刀尖倒角
  • 0.0 in (552)
刀尖倒角 Min 刀尖倒角 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • K313 (466)
  • KCK20B (472)
  • KCM35B (350)
  • KCP10B (495)
  • KCP25B (505)
  • KCU10 (543)
  • KCU10B (543)
  • KCU25 (571)
  • KCU25B (463)
刀具手式
刀具手式
  • L (194)
  • N (30)
  • N - Neutral (3)
  • R (194)
修光刃刀片
修光刃刀片
  • N (930)
F 尺寸
F 尺寸
  • 1.276 mm (3)
  • 1.451 mm (2)
  • 1.826 mm (10)
  • 2.7 mm (3)
  • 3.7 mm (2)
  • 5.476 mm (6)
  • 5.976 mm (6)
  • 8.525 mm (4)
  • 9.0 mm (4)
  • 9.525 mm (6)
  • 10.0 mm (6)
  • 11.0 mm (5)
  • 11.05 mm (7)
  • 12.0 mm (18)
  • 12.025 mm (2)
  • 12.101 mm (2)
  • 12.15 mm (2)
  • 12.701 mm (18)
  • 12.726 mm (2)
  • 12.8 mm (2)
  • 12.851 mm (2)
  • 13.0 mm (6)
  • 13.951 mm (2)
  • 13.976 mm (4)
  • 15.875 mm (8)
  • 15.976 mm (2)
  • 16.0 mm (8)
  • 16.026 mm (4)
  • 16.1 mm (2)
  • 16.151 mm (4)
  • 17.0 mm (4)
  • 17.3 mm (6)
  • 17.5 mm (2)
  • 19.05 mm (8)
  • 19.075 mm (10)
  • 19.125 mm (20)
  • 19.225 mm (4)
  • 20.0 mm (8)
  • 20.05 mm (10)
  • 20.1 mm (20)
  • 20.201 mm (4)
  • 21.125 mm (4)
  • 22.0 mm (4)
  • 25.05 mm (12)
  • 25.1 mm (24)
  • 25.201 mm (4)
  • 25.35 mm (2)
  • 25.425 mm (12)
  • 25.475 mm (24)
  • 25.576 mm (4)
  • 25.701 mm (2)
  • 26.0 mm (2)
  • 31.0 mm (2)
  • 31.5 mm (3)
  • 31.75 mm (1)
  • 31.826 mm (12)
  • 31.925 mm (4)
  • 32.051 mm (4)
  • 32.075 mm (12)
  • 32.176 mm (4)
  • 32.301 mm (4)
  • 32.4 mm (2)
  • 32.65 mm (2)
  • 38.275 mm (2)
  • 38.401 mm (2)
  • 38.75 mm (2)
  • 40.176 mm (2)
  • 40.301 mm (2)
  • 40.651 mm (2)
F 尺寸 Min F 尺寸 Max
F 尺寸
F 尺寸
  • 0.05 in (3)
  • 0.057 in (2)
  • 0.073 in (10)
  • 0.106 in (3)
  • 0.146 in (2)
  • 0.216 in (6)
  • 0.236 in (6)
  • 0.336 in (4)
  • 0.354 in (4)
  • 0.375 in (6)
  • 0.394 in (6)
  • 0.433 in (5)
  • 0.435 in (7)
  • 0.473 in (18)
  • 0.474 in (2)
  • 0.477 in (2)
  • 0.479 in (2)
  • 0.5 in (18)
  • 0.501 in (2)
  • 0.504 in (2)
  • 0.506 in (2)
  • 0.512 in (6)
  • 0.549 in (2)
  • 0.55 in (4)
  • 0.625 in (8)
  • 0.629 in (2)
  • 0.63 in (8)
  • 0.631 in (4)
  • 0.634 in (2)
  • 0.636 in (4)
  • 0.669 in (4)
  • 0.681 in (6)
  • 0.69 in (2)
  • 0.75 in (8)
  • 0.751 in (10)
  • 0.753 in (20)
  • 0.757 in (4)
  • 0.787 in (8)
  • 0.789 in (10)
  • 0.791 in (20)
  • 0.795 in (4)
  • 0.833 in (4)
  • 0.866 in (4)
  • 0.986 in (12)
  • 0.988 in (24)
  • 0.992 in (4)
  • 0.998 in (2)
  • 1.002 in (12)
  • 1.004 in (24)
  • 1.008 in (4)
  • 1.012 in (2)
  • 1.024 in (2)
  • 1.22 in (2)
  • 1.24 in (3)
  • 1.25 in (1)
  • 1.254 in (12)
  • 1.258 in (4)
  • 1.262 in (4)
  • 1.264 in (12)
  • 1.268 in (4)
  • 1.272 in (4)
  • 1.276 in (2)
  • 1.285 in (2)
  • 1.508 in (2)
  • 1.512 in (2)
  • 1.526 in (2)
  • 1.582 in (2)
  • 1.587 in (2)
  • 1.6 in (2)
F 尺寸 Min F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 20.0 mm (12)
  • 25.0 mm (10)
  • 25.401 mm (2)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 38.1 mm (4)
  • 40.0 mm (4)
最小轴向凹槽直径 Min 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.787 in (12)
  • 0.984 in (10)
  • 1.0 in (2)
  • 1.25 in (6)
  • 1.26 in (6)
  • 1.5 in (4)
  • 1.575 in (4)
最小轴向凹槽直径 Min 最小轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 0.787 in (28)
  • 1.024 in (8)
  • 1.26 in (40)
  • 1.655 in (24)
  • 2.047 in (24)
  • 2.441 in (29)
  • 2.52 in (11)
  • 2.598 in (8)
  • 3.15 in (4)
  • 3.228 in (4)
最大轴向凹槽直径 Min 最大轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 20.0 mm (28)
  • 26.0 mm (8)
  • 32.0 mm (40)
  • 42.0 mm (24)
  • 52.0 mm (24)
  • 62.0 mm (29)
  • 64.0 mm (11)
  • 66.0 mm (8)
  • 80.0 mm (4)
  • 82.0 mm (4)
最大轴向凹槽直径 Min 最大轴向凹槽直径 Max
切削方向
切削方向
  • B (8)
  • E (382)
  • S (31)
前角样式
前角样式
  • NEGATIVE-ZERO (34)
  • NEUTRAL (ZERO) (18)
  • POSITIVE-ZERO (40)
最大镗孔深度
最大镗孔深度
  • 0.946 in (4)
  • 1.0 in (4)
  • 1.25 in (6)
  • 1.26 in (4)
  • 1.5 in (6)
  • 1.575 in (4)
  • 1.586 in (2)
  • 1.587 in (2)
  • 1.969 in (2)
  • 1.98 in (4)
  • 2.0 in (7)
  • 2.496 in (2)
  • 2.5 in (1)
  • 2.52 in (4)
最大镗孔深度 Min 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 24.0 mm (4)
  • 25.401 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (4)
  • 38.1 mm (6)
  • 40.0 mm (4)
  • 40.276 mm (2)
  • 40.301 mm (2)
  • 50.0 mm (2)
  • 50.301 mm (4)
  • 50.801 mm (7)
  • 63.401 mm (2)
  • 63.5 mm (1)
  • 64.0 mm (4)
最大镗孔深度 Min 最大镗孔深度 Max
镗杆材料
镗杆材料
  • S (28)
frontEnd
适配接头前端
适配接头前端
  • CARTRIDGE MOUNT (76)
  • SQUARE SHANK ADAPTER (20)
夹具样式
夹具样式
  • C (54)
  • S (38)
  • Y (347)
切削宽度
切削宽度
  • 0.055 in (26)
  • 0.063 in (51)
  • 0.079 in (111)
  • 0.084 in (124)
  • 0.094 in (110)
  • 0.095 in (114)
  • 0.098 in (114)
  • 0.119 in (108)
  • 0.123 in (128)
  • 0.125 in (124)
  • 0.13 in (127)
  • 0.157 in (89)
  • 0.161 in (96)
  • 0.162 in (110)
  • 0.187 in (103)
  • 0.188 in (77)
  • 0.192 in (108)
  • 0.197 in (58)
  • 0.202 in (80)
  • 0.237 in (54)
  • 0.241 in (73)
  • 0.25 in (71)
  • 0.255 in (63)
  • 0.276 in (46)
  • 0.281 in (47)
  • 0.289 in (42)
  • 0.312 in (38)
  • 0.315 in (34)
  • 0.317 in (38)
  • 0.32 in (53)
  • 0.375 in (14)
  • 0.38 in (8)
  • 0.394 in (12)
  • 0.399 in (18)
切削宽度 Min 切削宽度 Max
切削宽度
切削宽度
  • 1.401 mm (26)
  • 1.6 mm (51)
  • 2.0 mm (111)
  • 2.125 mm (124)
  • 2.375 mm (110)
  • 2.401 mm (114)
  • 2.5 mm (114)
  • 3.0 mm (108)
  • 3.125 mm (128)
  • 3.176 mm (124)
  • 3.301 mm (127)
  • 4.0 mm (89)
  • 4.101 mm (96)
  • 4.125 mm (110)
  • 4.75 mm (103)
  • 4.775 mm (77)
  • 4.875 mm (108)
  • 5.0 mm (58)
  • 5.125 mm (80)
  • 6.0 mm (54)
  • 6.125 mm (73)
  • 6.351 mm (71)
  • 6.476 mm (63)
  • 7.0 mm (46)
  • 7.125 mm (47)
  • 7.325 mm (42)
  • 7.926 mm (38)
  • 8.0 mm (34)
  • 8.05 mm (38)
  • 8.125 mm (53)
  • 9.525 mm (14)
  • 9.65 mm (8)
  • 10.0 mm (12)
  • 10.125 mm (18)
切削宽度 Min 切削宽度 Max
前端类型
前端类型
  • MCS - Modular Cartridge System (76)
  • VKT - Square Shank (20)
刀片形状
刀片形状
  • PRISMATIC (973)
刀夹规格
刀夹规格
  • 50 (32)
  • 65 (10)
前端样式
前端样式
  • MCS01 Modular Deep Grooving (76)
  • VKT01 Std Design (20)
刀片尺寸
刀片尺寸
  • 10 (8)
  • 1F (12)
  • 2 (64)
  • 3 (56)
  • 4 (56)
  • 5 (36)
  • 6 (32)
  • 8 (16)
最大切削深度
最大切削深度
  • 0.197 in (8)
  • 0.276 in (24)
  • 0.394 in (40)
  • 0.433 in (1)
  • 0.473 in (18)
  • 0.512 in (8)
  • 0.551 in (2)
  • 0.591 in (1)
  • 0.63 in (150)
  • 0.669 in (1)
  • 0.787 in (1)
  • 0.866 in (28)
  • 1.024 in (82)
  • 1.181 in (1)
  • 1.26 in (38)
  • 1.299 in (10)
  • 1.575 in (26)
  • 1.969 in (5)
  • 2.362 in (5)
  • 4.724 in (1)
最大切削深度 Min 最大切削深度 Max
最大切削深度
最大切削深度
  • 5.0 mm (8)
  • 7.0 mm (24)
  • 10.0 mm (40)
  • 11.0 mm (1)
  • 12.0 mm (18)
  • 13.0 mm (8)
  • 14.0 mm (2)
  • 15.0 mm (1)
  • 16.0 mm (150)
  • 17.0 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (28)
  • 26.0 mm (82)
  • 30.0 mm (1)
  • 32.0 mm (38)
  • 33.0 mm (10)
  • 40.0 mm (26)
  • 50.0 mm (5)
  • 60.0 mm (5)
  • 120.0 mm (1)
最大切削深度 Min 最大切削深度 Max
量规长度
量规长度
  • 6 in (4)
  • 7 in (2)
  • 0.866 in (12)
  • 1.102 in (2)
  • 1.299 in (2)
  • 1.496 in (2)
  • 1.693 in (2)
  • 1.85 in (6)
  • 1.891 in (6)
  • 1.929 in (4)
  • 2.106 in (4)
  • 2.185 in (2)
  • 2.244 in (6)
  • 2.283 in (6)
  • 2.303 in (6)
  • 2.382 in (2)
  • 2.5 in (12)
  • 2.579 in (2)
  • 2.618 in (4)
  • 2.697 in (4)
  • 2.894 in (4)
  • 5.439 in (2)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (6)
  • 5.533 in (4)
  • 5.906 in (2)
  • 6.226 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.534 in (2)
  • 6.694 in (2)
量规长度
量规长度
  • 22 mm (12)
  • 47 mm (6)
  • 48 mm (6)
  • 57 mm (6)
  • 58 mm (6)
  • 49 mm (4)
  • 150 mm (2)
  • 170 mm (2)
  • 28 mm (2)
  • 33 mm (2)
  • 38 mm (2)
  • 43 mm (2)
  • 53.5 mm (4)
  • 55.5 mm (2)
  • 58.5 mm (6)
  • 60.5 mm (2)
  • 63.5 mm (12)
  • 65.5 mm (2)
  • 66.5 mm (4)
  • 68.5 mm (4)
  • 73.5 mm (4)
  • 138.15 mm (2)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (6)
  • 140.55 mm (4)
  • 152.4 mm (4)
  • 158.15 mm (2)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 165.951 mm (2)
  • 177.8 mm (2)
insertGeometry
形状
形状
  • PRISMATIC (510)
刀座规格
刀座规格
  • 10 (20)
  • 1F (10)
  • 2 (53)
  • 3 (103)
  • 4 (102)
  • 5 (44)
  • 6 (102)
  • 8 (75)
切削刀具材料
切削刀具材料
  • H W (973)
backEnd
连接类型
连接类型
  • BORING BAR (52)
  • CUTOFF BLADE (46)
  • Cutoff Blade (3)
  • SQUARE SHANK (320)
系统规格
系统规格
  • KM40TS (4)
  • KM4X63 (4)
  • KM50TS (8)
  • KM63TS (8)
  • KM63XMZ (8)
  • KM80ATC (8)
  • KM80TS (8)
  • PSC40 (4)
  • PSC50 (8)
  • PSC63 (8)
  • PSC80 (8)
  • VDI30 (10)
  • VDI40 (10)
后端直径
后端直径
  • 12.0 mm (4)
  • 12.701 mm (4)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (6)
  • 25.401 mm (6)
  • 30.0 mm (10)
  • 31.701 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (4)
  • 40.0 mm (18)
  • 50.0 mm (16)
  • 63.0 mm (28)
  • 80.0 mm (24)
后端直径 Min 后端直径 Max
后端直径
后端直径
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (6)
  • 0.787 in (6)
  • 0.984 in (6)
  • 1.0 in (6)
  • 1.181 in (10)
  • 1.248 in (1)
  • 1.25 in (3)
  • 1.26 in (4)
  • 1.575 in (18)
  • 1.969 in (16)
  • 2.48 in (28)
  • 3.15 in (24)
后端直径 Min 后端直径 Max
刀柄高度
刀柄高度
  • 0.375 in (6)
  • 0.394 in (6)
  • 0.473 in (24)
  • 0.5 in (24)
  • 0.625 in (14)
  • 0.63 in (14)
  • 0.748 in (6)
  • 0.75 in (42)
  • 0.787 in (44)
  • 0.984 in (44)
  • 1.0 in (46)
  • 1.024 in (20)
  • 1.25 in (22)
  • 1.26 in (43)
  • 1.5 in (6)
  • 1.575 in (6)
  • 2.067 in (2)
刀柄高度 Min 刀柄高度 Max
刀柄高度
刀柄高度
  • 9.525 mm (6)
  • 10.0 mm (6)
  • 12.0 mm (24)
  • 12.701 mm (24)
  • 15.875 mm (14)
  • 16.0 mm (14)
  • 19.0 mm (6)
  • 19.05 mm (42)
  • 20.0 mm (44)
  • 25.0 mm (44)
  • 25.401 mm (46)
  • 26.0 mm (20)
  • 31.75 mm (22)
  • 32.0 mm (43)
  • 38.1 mm (6)
  • 40.0 mm (6)
  • 52.5 mm (2)
刀柄高度 Min 刀柄高度 Max
刀柄宽度
刀柄宽度
  • 0.065 in (6)
  • 0.072 in (5)
  • 0.095 in (8)
  • 0.134 in (5)
  • 0.174 in (3)
  • 0.213 in (4)
  • 0.276 in (2)
  • 0.313 in (16)
  • 0.375 in (6)
  • 0.394 in (6)
  • 0.473 in (24)
  • 0.5 in (24)