Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

外径和内径

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (11096)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11067)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11067)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11067)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11067)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11067)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11096)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11096)
  • M Stainless Steel (8491)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8491)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8491)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8491)
  • K Cast Iron (7844)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7789)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7764)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7552)
  • N Non-Ferrous Materials (4456)
    • N1
      Wrought Aluminum
      (3921)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4074)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2339)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4442)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4149)
    • N6
      Carbon, Graphite Composites, CFRP
      (3383)
    • N7
      MMC's
      (3974)
  • S High-Temp Alloys (8374)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8317)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8339)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8335)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7012)
  • H Hardened Materials (4073)
    • H1
      Hardened Materials 44-48 HRC
      (4073)
    • H2
      Hardened Materials 48-55 HRC
      (4045)
    • H3
      Hardened Materials 56-60 HRC
      (4045)
    • H4
      Hardened Materials >60 HRC
      (3067)
Select First Choice
  • CN (947)
  • DE (942)
  • GB (246)
  • IN (365)
  • US (961)
Applications
  • Back Boring Back Boring (1198)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (166)
  • Blind Hole Finishing Blind Hole Finishing (166)
  • CRT Boring CRT Boring (164)
  • CRT Profiling CRT Profiling (164)
  • Chamfer Milling Chamfer Milling (164)
  • Chamfer Turning Chamfer Turning (1994)
  • Convex Drilling Convex Drilling (1)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (1)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1)
  • Counterboring Counterboring (1)
  • Countersinking Countersinking (1)
  • Cut-Off Cut-Off (175)
  • Deep Grooving Deep Grooving (175)
  • Drilling Drilling (165)
  • Face Grooving Face Grooving (11)
  • Face Milling Face Milling (164)
  • Facing Facing (2446)
  • Grooving Grooving (181)
  • ID Facing ID Facing (173)
  • ID Grooving ID Grooving (186)
  • ID Thread Turning ID Thread Turning (17516)
  • Inclined Entry Drilling Inclined Entry Drilling (1)
  • Inclined Exit Drilling Inclined Exit Drilling (1)
  • Multiple Direction Cutting Multiple Direction Cutting (3908)
  • OD Thread Turning OD Thread Turning (13)
  • Plunge Turning Plunge Turning (2004)
  • Pre-Condition Pre-Condition (1)
  • Profiling Profiling (3274)
  • Shoulder Milling Shoulder Milling (164)
  • Stacked Plates Drilling Stacked Plates Drilling (1)
  • TRN Boring TRN Boring (1574)
  • Threading Threading (175)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (166)
  • Through Hole Finishing Through Hole Finishing (166)
  • Turning Turning (2502)
  • X-Offset Drilling X-Offset Drilling (1)
Type of Thread
  • 55 (6)
  • 60 (33)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (5721)
  • Interrupted (1950)
  • Lightly Interrupted Cut (6688)
  • Smooth Cut (9858)
  • Varying Depth of Cut (6684)
Tool Cutting Edge Angle
  • 45.0 (354)
  • 48.0 (9)
  • 49.783 (2)
  • 50.0 (29)
  • 60.0 (46)
  • 62.5 (56)
  • 63.0 (30)
  • 72.5 (29)
  • 75.0 (622)
  • 85.0 (24)
  • 89.0 (2)
  • 90.0 (1062)
  • 91.0 (3)
  • 92.0 (5)
  • 93.0 (929)
  • 95.0 (1325)
  • 97.0 (10)
  • 97.5 (4)
  • 105.0 (4)
  • 107.5 (152)
  • 117.5 (14)
  • 140.0 (4)
to
Connection Style
  • Bolt-On Head (280)
  • Boring Bar Shank (999)
  • KM (516)
  • Prismatic Adapter Mount (1)
  • Toolholder (1900)
Cutting Edges Per Insert
  • 0.0 (141)
  • 1.0 (3060)
  • 2.0 (5885)
  • 3.0 (2826)
  • 4.0 (7333)
  • 6.0 (3032)
  • 8.0 (4822)
  • 16.0 (2)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.0 (1)
  • 0.026 (3)
  • 0.03 (165)
  • 0.038 (515)
  • 0.05 (142)
  • 0.051 (103)
  • 0.057 (5)
  • 0.066 (8)
  • 0.07 (4)
  • 0.076 (14)
  • 0.08 (12)
  • 0.081 (4)
  • 0.089 (3)
  • 0.09 (3)
  • 0.094 (8)
  • 0.097 (9)
  • 0.1 (2194)
  • 0.102 (876)
  • 0.116 (3)
  • 0.117 (5)
  • 0.127 (12)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.152 (4)
  • 0.155 (8)
  • 0.157 (8)
  • 0.16 (6)
  • 0.165 (10)
  • 0.173 (8)
  • 0.177 (40)
  • 0.178 (106)
  • 0.18 (159)
  • 0.19 (10)
  • 0.191 (10)
  • 0.198 (8)
  • 0.2 (2874)
  • 0.202 (8)
  • 0.203 (1558)
  • 0.21 (4)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (3)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (10)
  • 0.255 (3)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (97)
  • 0.305 (2)
  • 0.315 (9)
  • 0.318 (10)
  • 0.33 (8)
  • 0.34 (182)
  • 0.343 (5)
  • 0.356 (8)
  • 0.38 (156)
  • 0.381 (108)
  • 0.394 (48)
  • 0.396 (81)
  • 0.397 (2928)
  • 0.4 (6517)
  • 0.404 (8)
  • 0.406 (575)
  • 0.43 (8)
  • 0.432 (2)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (8)
  • 0.5 (115)
  • 0.508 (8)
  • 0.52 (1)
  • 0.565 (1)
  • 0.57 (5)
  • 0.572 (10)
  • 0.575 (5)
  • 0.6 (139)
  • 0.65 (1)
  • 0.7 (4)
  • 0.703 (4)
  • 0.787 (54)
  • 0.79 (241)
  • 0.791 (61)
  • 0.792 (571)
  • 0.794 (3089)
  • 0.795 (47)
  • 0.8 (9242)
  • 0.826 (1)
  • 0.902 (10)
  • 0.93 (2)
  • 0.99 (1)
  • 1.0 (36)
  • 1.188 (207)
  • 1.19 (461)
  • 1.191 (2671)
  • 1.194 (17)
  • 1.195 (5)
  • 1.2 (6483)
  • 1.25 (8)
  • 1.5 (12)
  • 1.585 (8)
  • 1.587 (403)
  • 1.588 (1667)
  • 1.59 (1)
  • 1.6 (3836)
  • 1.75 (8)
  • 1.98 (5)
  • 1.981 (8)
  • 1.984 (11)
  • 2.0 (24)
  • 2.25 (10)
  • 2.38 (152)
  • 2.381 (275)
  • 2.388 (10)
  • 2.39 (1)
  • 2.4 (1296)
  • 2.5 (2)
  • 3.0 (30)
  • 3.175 (59)
  • 3.18 (136)
  • 3.2 (498)
  • 4.0 (145)
  • 4.76 (16)
  • 4.7625 (156)
  • 5.0 (62)
  • 6.0 (69)
  • 6.35 (318)
  • 7.9375 (29)
  • 7.94 (4)
  • 8.0 (33)
  • 9.525 (71)
  • 10.0 (46)
  • 12.5 (19)
  • 12.7 (42)
  • 15.875 (2)
  • 16.0 (12)
  • 25.4 (2)
  • -4999.5 (5)
to
Corner Radius
  • 0.0 (1)
  • 0.001 (97)
  • 0.0011 (64)
  • 0.0012 (4)
  • 0.0015 (515)
  • 0.002 (152)
  • 0.0023 (5)
  • 0.0026 (8)
  • 0.0028 (4)
  • 0.003 (14)
  • 0.0031 (8)
  • 0.0032 (4)
  • 0.0035 (3)
  • 0.0037 (8)
  • 0.0038 (9)
  • 0.004 (2391)
  • 0.0046 (8)
  • 0.005 (12)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (12)
  • 0.0062 (8)
  • 0.0063 (4)
  • 0.0065 (10)
  • 0.0068 (8)
  • 0.007 (185)
  • 0.0075 (10)
  • 0.0078 (23)
  • 0.0079 (18)
  • 0.008 (2957)
  • 0.0083 (411)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (3)
  • 0.0099 (8)
  • 0.01 (10)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (64)
  • 0.012 (35)
  • 0.0124 (8)
  • 0.0125 (10)
  • 0.013 (182)
  • 0.0135 (10)
  • 0.014 (8)
  • 0.015 (174)
  • 0.0155 (48)
  • 0.0156 (6781)
  • 0.0158 (19)
  • 0.0159 (8)
  • 0.016 (1912)
  • 0.017 (10)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (8)
  • 0.0197 (111)
  • 0.02 (24)
  • 0.0225 (10)
  • 0.026 (1)
  • 0.0276 (4)
  • 0.031 (2037)
  • 0.0311 (61)
  • 0.0312 (2636)
  • 0.0313 (9445)
  • 0.0315 (267)
  • 0.032 (45)
  • 0.0325 (1)
  • 0.0355 (10)
  • 0.0368 (2)
  • 0.039 (1)
  • 0.0394 (36)
  • 0.0468 (207)
  • 0.0469 (6831)
  • 0.047 (2065)
  • 0.0472 (124)
  • 0.048 (10)
  • 0.0487 (38)
  • 0.0492 (8)
  • 0.0516 (52)
  • 0.0591 (12)
  • 0.0625 (3994)
  • 0.063 (1659)
  • 0.0689 (8)
  • 0.078 (8)
  • 0.0781 (14)
  • 0.0787 (21)
  • 0.0886 (10)
  • 0.0928 (10)
  • 0.0938 (1487)
  • 0.094 (345)
  • 0.0984 (2)
  • 0.106 (5)
  • 0.1181 (30)
  • 0.125 (342)
  • 0.126 (232)
  • 0.1563 (425)
  • 0.1575 (145)
  • 0.1875 (156)
  • 0.1969 (62)
  • 0.197 (13)
  • 0.2362 (69)
  • 0.25 (318)
  • 0.312 (245)
  • 0.3125 (35)
  • 0.315 (33)
  • 0.375 (71)
  • 0.3935 (7)
  • 0.3937 (43)
  • 0.4688 (12)
  • 0.492 (2)
  • 0.4922 (19)
  • 0.5 (42)
  • 0.625 (2)
  • 0.6299 (7)
  • 0.63 (7)
  • 1.0 (2)
  • -4999.5 (5)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (1939)
  • Interrupted (23)
  • Lightly Interrupted Cut (2739)
  • Smooth Cut (5813)
  • Varying Depth of Cut (2767)
Grade Of Cutting Tool
  • 13E (1828)
  • 241 (404)
  • AC5 (160)
  • CG4 (103)
  • CG5 (24)
  • CG6 (3)
  • CL4 (1174)
  • CM1 (24)
  • CM2 (1752)
  • CM3 (1577)
  • CM4 (998)
  • CM5 (162)
  • CPX (1684)
  • CW2 (729)
  • CW2015 (451)
  • CW3020 (16)
  • CW5025 (510)
  • GH1 (97)
  • GH2 (10)
  • GX (1149)
  • HCK10 (28)
  • HK1500 (369)
  • HK35 (33)
  • HT2 (1235)
  • HTX (1091)
  • HWK10 (1)
  • HWK15 (30)
  • K00379 (121)
  • K060 (1124)
  • K090 (2381)
  • K1 (924)
  • K1010P (97)
  • K10M (2426)
  • K10P (2207)
  • K10U (2141)
  • K11 (77)
  • K15U (2086)
  • K20K (2443)
  • K21 (1345)
  • K25M (2091)
  • K25P (2101)
  • K2884 (35)
  • K2885 (155)
  • K313 (3923)
  • K35P (1251)
  • K420 (2047)
  • K45 (1452)
  • K4H (8)
  • K6 (209)
  • K68 (3524)
  • K8 (7)
  • K8735 (53)
  • KB1340 (802)
  • KB1345 (1103)
  • KB1610 (1988)
  • KB1625 (1403)
  • KB1630 (1394)
  • KB5610 (1643)
  • KB5625 (1848)
  • KB5630 (1274)
  • KB9610 (2306)
  • KB9640 (988)
  • KBH10 (1945)
  • KBH10B (1080)
  • KBH20 (2108)
  • KBH20B (1081)
  • KBK35 (457)
  • KBK45 (65)
  • KC210 (1540)
  • KC250 (1720)
  • KC5010 (4514)
  • KC5020P (295)
  • KC5025 (3734)
  • KC514M (3)
  • KC522M (3)
  • KC525M (2)
  • KC5410 (3095)
  • KC5510 (2189)
  • KC5525 (1225)
  • KC710 (930)
  • KC715M (7)
  • KC720 (2953)
  • KC722 (418)
  • KC725M (41)
  • KC730 (3912)
  • KC7310 (2558)
  • KC732 (2907)
  • KC735M (47)
  • KC740 (63)
  • KC792M (8)
  • KC8050 (4060)
  • KC810 (3721)
  • KC850 (4145)
  • KC9010 (3089)
  • KC9025 (4022)
  • KC910 (3681)
  • KC9105 (3151)
  • KC9110 (4274)
  • KC9120 (3308)
  • KC9125 (3866)
  • KC9125RR (242)
  • KC9140 (2556)
  • KC9145 (1890)
  • KC915M (3)
  • KC920M (11)
  • KC9210 (168)
  • KC9215 (2264)
  • KC9225 (3599)
  • KC9240 (3602)
  • KC9240NEW (3556)
  • KC9245 (2264)
  • KC925M (16)
  • KC9315 (3908)
  • KC9320 (3313)
  • KC9325 (3081)
  • KC935 (4007)
  • KC935M (1)
  • KC950 (3435)
  • KC990 (3586)
  • KCD25 (1279)
  • KCK05 (3397)
  • KCK05B (2546)
  • KCK15 (3130)
  • KCK15B (3412)
  • KCK20 (3588)
  • KCK20B (3463)
  • KCM15 (3461)
  • KCM15B (2896)
  • KCM25 (3620)
  • KCM25B (3281)
  • KCM35 (2802)
  • KCM35B (1877)
  • KCP05 (3066)
  • KCP05B (1754)
  • KCP10 (3972)
  • KCP10B (3767)
  • KCP15 (58)
  • KCP25 (4140)
  • KCP25B (4004)
  • KCP30 (3490)
  • KCP30B (2167)
  • KCP40 (2175)
  • KCP40B (2162)
  • KCPK05 (2103)
  • KCPK30 (8)
  • KCS10 (1696)
  • KCS10B (3067)
  • KCSM30 (3)
  • KCU10 (4444)
  • KCU25 (3715)
  • KD050 (1917)
  • KD081 (1764)
  • KD100 (1527)
  • KD105 (214)
  • KD120 (1761)
  • KD1400 (2061)
  • KD1405 (1241)
  • KD1425 (2228)
  • KD200 (29)
  • KD230 (37)
  • KD240 (35)
  • KM1 (1202)
  • KMF (465)
  • KT1120 (380)
  • KT125 (1922)
  • KT150 (1554)
  • KT175 (2432)
  • KT195M (7)
  • KT315 (3174)
  • KT325 (1410)
  • KT5020 (280)
  • KTP10 (1178)
  • KU10 (782)
  • KU10T (2779)
  • KU25T (14)
  • KU30T (3340)
  • KY1310 (1640)
  • KY1320 (2069)
  • KY1335 (5)
  • KY1525 (123)
  • KY1540 (1350)
  • KY1615 (2366)
  • KY2000 (1541)
  • KY2100 (940)
  • KY2200 (14)
  • KY3000 (2144)
  • KY3400 (1915)
  • KY3500 (2300)
  • KY4000 (1015)
  • KY4300 (1194)
  • KY4400 (2172)
  • KYHK15B (2001)
  • KYHS10 (3)
  • KYK10 (1364)
  • KYK25 (1784)
  • KYK35 (2233)
  • KYS25 (1140)
  • KYS30 (1287)
  • KYSM10 (3)
  • KYSP30 (5)
  • MC2 (219)
  • MC3 (23)
  • NL200 (571)
  • NL250 (2079)
  • NL300 (1595)
  • NL400 (843)
  • NL920 (1558)
  • P10 (104)
  • P20 (63)
  • P25 (898)
  • P2F (154)
  • PB100 (131)
  • PB170 (126)
  • PB250 (141)
  • PB300 (107)
  • PD100 (27)
  • PD50 (25)
  • PS5 (672)
  • SF30 (47)
  • SP0819 (1403)
  • SP0A00 (118)
  • SP0G00 (3)
  • SP0NTA (1)
  • SP0PW3 (10)
  • SP3019 (1386)
  • SP4019 (1463)
  • SP4036 (128)
  • SP4093 (128)
  • SP4200 (62)
  • SP61EJ (227)
  • SP7779 (10)
  • SPADAP (232)
  • SPB400 (35)
  • SPM5F2 (94)
  • SPMQMA (64)
  • SPN3W1 (2)
  • SPN4W2 (24)
  • SPSREJ (75)
  • THM (287)
  • THM-X (258)
  • THMF-X (182)
  • TN10P (572)
  • TN10U (477)
  • TN15M (561)
  • TN15U (458)
  • TN2000 (407)
  • TN20K (593)
  • TN20P (624)
  • TN30M (587)
  • TN30P (500)
  • TN4000 (384)
  • TN5015 (490)
  • TN5020 (472)
  • TN5105 (463)
  • TN5120 (554)
  • TN6010 (328)
  • TN6025 (326)
  • TN7005 (361)
  • TN7010 (587)
  • TN7015 (603)
  • TN7025 (599)
  • TN7035 (611)
  • TN7105 (332)
  • TN7110 (455)
  • TN7115 (571)
  • TN7125 (516)
  • TN7135 (475)
  • TN8025 (562)
  • TTI15 (232)
  • TTM (2)
  • TTM09 (144)
  • TTR (229)
  • TTR-X (24)
  • TTS (298)
  • TTX (340)
  • W00160 (1)
  • W00162 (15)
  • W00342 (57)
  • WBH10C (427)
  • WBH10P (280)
  • WBH10U (400)
  • WBH20P (443)
  • WBH25P (371)
  • WBH25U (359)
  • WBH30P (280)
  • WBK40U (197)
  • WBK45U (313)
  • WDN00U (249)
  • WDN25U (384)
  • WK05CT (610)
  • WK15CT (371)
  • WK20CT (681)
  • WM15CT (661)
  • WM25CT (662)
  • WM35CT (562)
  • WP05CT (152)
  • WP15CT (684)
  • WP20TT (41)
  • WP25CT (710)
  • WP35CT (633)
  • WS10PT (580)
  • WS25PT (593)
  • WU10HT (584)
  • X00511 (403)
  • YY3A00 (41)
  • YY87EL (62)
  • YYMITA (14)
Hand Of Tool
  • L (1812)
  • N (263)
  • R (2017)
Wiper Insert
  • N (20724)
  • Y (2136)
Minimum Axial Groove Diameter
  • 0.18 (10)
  • 0.2039 (1)
  • 0.204 (13)
  • 0.2079 (1)
  • 0.208 (10)
  • 0.218 (4)
  • 0.224 (7)
  • 0.2276 (2)
  • 0.228 (10)
  • 0.23 (1)
  • 0.2339 (5)
  • 0.234 (15)
  • 0.2362 (3)
  • 0.243 (2)
  • 0.244 (1)
  • 0.2598 (2)
  • 0.26 (7)
  • 0.267 (4)
  • 0.272 (1)
  • 0.275 (11)
  • 0.278 (1)
  • 0.279 (5)
  • 0.2791 (1)
  • 0.28 (3)
  • 0.285 (31)
  • 0.292 (6)
  • 0.2921 (1)
  • 0.2957 (1)
  • 0.296 (10)
  • 0.2992 (3)
  • 0.3 (5)
  • 0.321 (4)
  • 0.346 (1)
  • 0.347 (4)
  • 0.356 (6)
  • 0.3575 (2)
  • 0.358 (7)
  • 0.36 (5)
  • 0.3602 (1)
  • 0.362 (1)
  • 0.413 (1)
  • 0.415 (16)
  • 0.431 (1)
  • 0.433 (8)
  • 0.4331 (10)
  • 0.4378 (1)
  • 0.438 (5)
  • 0.439 (3)
  • 0.4799 (5)
  • 0.48 (33)
  • 0.49 (2)
  • 0.508 (2)
  • 0.5118 (26)
  • 0.512 (11)
  • 0.5181 (1)
  • 0.538 (1)
  • 0.54 (2)
  • 0.563 (6)
  • 0.6 (53)
  • 0.6299 (44)
  • 0.63 (13)
  • 0.65 (1)
  • 0.7299 (2)
  • 0.73 (10)
  • 0.731 (4)
  • 0.77 (48)
  • 0.7701 (7)
  • 0.787 (12)
  • 0.7874 (65)
  • 0.836 (1)
  • 0.842 (1)
  • 0.85 (13)
  • 0.855 (1)
  • 0.9299 (6)
  • 0.93 (44)
  • 0.9799 (1)
  • 0.98 (19)
  • 0.984 (18)
  • 0.9843 (67)
  • 1.0 (2)
  • 1.03 (1)
  • 1.06 (1)
  • 1.063 (2)
  • 1.1811 (2)
  • 1.19 (5)
  • 1.2 (61)
  • 1.22 (11)
  • 1.2598 (121)