Spiral Circular
Planeado
Fresado helicoidal
Rectificado en rampa: Material en bruto
Fresado — Con refrigeración interna
Fresado — lateral y planeado
Mecanizado de alojamientos
Avellanado
Inclined Square End MillDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 5672805 |
| Referencia ISO | C7713VR10-A2.00Z07R |
| Referencia ANSI | C7713VR10-A2.00Z7R |
| Diámetro de corte máximo [D1MAX] | 50.8 mm |
| Diámetro de corte máximo [D1MAX] | 2 in |
| Diámetro de corte efectivo [D1] | 40.8 mm |
| Diámetro de corte efectivo [D1] | 1.6063 in |
| Adaptador/Mango/Diá int [D] | 19.05 mm |
| Adaptador/Mango/Diá int [D] | 0.75 in |
| Diámetro de núcleo [D6] | 41.6 mm |
| Diámetro de núcleo [D6] | 1.6378 in |
| Longitud total [L] | 40 mm |
| Longitud total [L] | 1.5748 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 5 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | 0.1969 in |
| Número de plaquitas | 7 |
Spiral CircularPlaneadoFresado helicoidalRectificado en rampa: Material en brutoFresado — Con refrigeración internaFresado — lateral y planeadoMecanizado de alojamientosAvellanadoInclined Square End MillCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,12 | 0,19 | 0,26 | 0,08 | 0,13 | 0,18 | 0,06 | 0,10 | 0,14 | 0,05 | 0,09 | 0,12 | 0,05 | 0,08 | 0,11 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
| 422–X4 | 0,12 | 0,29 | 0,57 | 0,08 | 0,21 | 0,40 | 0,06 | 0,16 | 0,30 | 0,05 | 0,14 | 0,26 | 0,05 | 0,13 | 0,24 | 422–X4 |
| T–X4 | 0,23 | 0,41 | 0,66 | 0,17 | 0,30 | 0,47 | 0,13 | 0,22 | 0,35 | 0,11 | 0,19 | 0,31 | 0,10 | 0,18 | 0,28 | T–X4 |
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,13 | 0,21 | 0,30 | 0,10 | 0,15 | 0,21 | 0,07 | 0,12 | 0,16 | 0,06 | 0,10 | 0,14 | 0,06 | 0,09 | 0,13 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 432–X5 |
| 422–X4 | 0,13 | 0,34 | 0,66 | 0,10 | 0,24 | 0,47 | 0,07 | 0,18 | 0,35 | 0,06 | 0,16 | 0,30 | 0,06 | 0,15 | 0,28 | 422–X4 |
| T–X4 | 0,27 | 0,48 | 0,77 | 0,19 | 0,34 | 0,55 | 0,14 | 0,25 | 0,41 | 0,13 | 0,22 | 0,35 | 0,12 | 0,20 | 0,32 | T–X4 |
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,16 | 0,26 | 0,36 | 0,12 | 0,19 | 0,26 | 0,09 | 0,14 | 0,19 | 0,08 | 0,12 | 0,17 | 0,07 | 0,11 | 0,15 | 701–X4 |
| 422–X8 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X8 |
| 432–X5 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 432–X5 |
| 422–X4 | 0,16 | 0,41 | 0,80 | 0,12 | 0,30 | 0,57 | 0,09 | 0,22 | 0,42 | 0,08 | 0,19 | 0,37 | 0,07 | 0,18 | 0,34 | 422–X4 |
| T–X4 | 0,33 | 0,58 | 0,94 | 0,23 | 0,42 | 0,67 | 0,18 | 0,31 | 0,49 | 0,15 | 0,27 | 0,43 | 0,14 | 0,25 | 0,39 | T–X4 |
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,14 | 0,23 | 0,32 | 0,10 | 0,17 | 0,23 | 0,08 | 0,13 | 0,17 | 0,07 | 0,11 | 0,15 | 0,06 | 0,10 | 0,14 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 432–X5 |
| 422–X4 | 0,14 | 0,37 | 0,71 | 0,10 | 0,26 | 0,51 | 0,08 | 0,20 | 0,38 | 0,07 | 0,17 | 0,33 | 0,06 | 0,16 | 0,30 | 422–X4 |
| T–X4 | 0,29 | 0,52 | 0,84 | 0,21 | 0,37 | 0,59 | 0,16 | 0,28 | 0,44 | 0,14 | 0,24 | 0,38 | 0,13 | 0,22 | 0,35 | T–X4 |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .005 | .011 | .015 | .004 | .008 | .011 | .003 | .006 | .008 | .002 | .005 | .007 | .002 | .005 | .006 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 432–X5 |
| 422–X4 | .005 | .014 | .026 | .004 | .010 | .019 | .003 | .007 | .014 | .002 | .006 | .012 | .002 | .006 | .011 | 422–X4 |
| T–X4 | .011 | .018 | .029 | .008 | .013 | .020 | .006 | .010 | .015 | .005 | .008 | .013 | .005 | .008 | .012 | T–X4 |
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| – | 5% | 10% | 20% | 30% | 40–100% | |||||||||||
| 701–X4 | .006 | .013 | .018 | .005 | .009 | .013 | .003 | .007 | .010 | .003 | .006 | .008 | .003 | .006 | .008 | 701–X4 |
| 422–X8 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X8 |
| 432–X5 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 432–X5 |
| 422–X4 | .006 | .017 | .032 | .005 | .012 | .023 | .003 | .009 | .017 | .003 | .008 | .015 | .003 | .007 | .013 | 422–X4 |
| T–X4 | .013 | .022 | .035 | .009 | .016 | .025 | .007 | .012 | .018 | .006 | .010 | .016 | .006 | .009 | .015 | T–X4 |
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .006 | .012 | .016 | .004 | .008 | .012 | .003 | .006 | .009 | .003 | .005 | .008 | .002 | .005 | .007 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 432–X5 |
| 422–X4 | .006 | .015 | .029 | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .002 | .006 | .012 | 422–X4 |
| T–X4 | .011 | .019 | .031 | .008 | .014 | .022 | .006 | .010 | .016 | .005 | .009 | .014 | .005 | .008 | .013 | T–X4 |
| Geometría de plaquita | Avance por diente programado (fz) como % de la profundidad de corte radial (ae) del diámetro de trabajo (dw) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .005 | .009 | .013 | .003 | .007 | .009 | .002 | .005 | .007 | .002 | .004 | .006 | .002 | .004 | .006 | 701–X4 |
| 422–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 422–X8 |
| 432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
| 422–X4 | .005 | .012 | .023 | .003 | .008 | .016 | .002 | .006 | .012 | .002 | .006 | .010 | .002 | .005 | .010 | 422–X4 |
| T–X4 | .009 | .015 | .025 | .007 | .011 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .007 | .011 | T–X4 |
| Grupo de materiales | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 130 | 213 | 295 | 140 | 228 | 315 | 130 | 200 | 270 | 140 | 243 | 345 | 140 | 255 | 370 |
| 2 | – | – | – | – | – | – | 115 | 188 | 260 | 120 | 198 | 275 | 115 | 178 | 240 | 120 | 213 | 305 | 120 | 223 | 325 | |
| 3 | – | – | – | – | – | – | 100 | 165 | 230 | 105 | 175 | 245 | 100 | 155 | 210 | 105 | 188 | 270 | 105 | 198 | 290 | |
| 4 | – | – | – | – | – | – | 75 | 125 | 175 | 80 | 135 | 190 | 75 | 118 | 160 | 80 | 143 | 205 | 80 | 145 | 210 | |
| 5 | – | – | – | 70 | 103 | 135 | 70 | 105 | 140 | 70 | 110 | 150 | 70 | 100 | 130 | – | – | – | 80 | 120 | 160 | |
| 6 | – | – | – | 50 | 83 | 115 | 50 | 85 | 120 | 50 | 90 | 130 | 50 | 80 | 110 | – | – | – | 60 | 100 | 140 | |
| M | 1 | – | – | – | 115 | 188 | 260 | 115 | 193 | 270 | 120 | 200 | 280 | 115 | 183 | 250 | – | – | – | 120 | 205 | 290 |
| 2 | – | – | – | 105 | 168 | 230 | 105 | 170 | 235 | 110 | 180 | 250 | 100 | 160 | 220 | – | – | – | 110 | 185 | 260 | |
| 3 | – | – | – | 85 | 138 | 190 | 85 | 140 | 195 | 90 | 145 | 200 | 80 | 130 | 180 | – | – | – | 90 | 150 | 210 | |
| K | 1 | 135 | 213 | 290 | – | – | – | 140 | 218 | 295 | 145 | 238 | 330 | 120 | 200 | 280 | 145 | 255 | 365 | 145 | 268 | 390 |
| 2 | 120 | 183 | 245 | – | – | – | 110 | 175 | 240 | 115 | 185 | 255 | 105 | 155 | 205 | 115 | 200 | 285 | 115 | 210 | 305 | |
| 3 | 115 | 158 | 200 | – | – | – | 100 | 160 | 220 | 105 | 170 | 235 | 95 | 133 | 170 | 105 | 183 | 260 | – | – | – | |
| N | 1–2 | 400 | 1725 | 3050 | – | – | – | – | – | – | 400 | 1648 | 2895 | – | – | – | – | – | – | – | – | – |
| 3 | 295 | 1368 | 2440 | – | – | – | – | – | – | 295 | 1308 | 2320 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 23 | 38 | 52 | 23 | 39 | 55 | 24 | 44 | 63 | 23 | 36 | 48 | – | – | – | – | – | – |
| 2 | – | – | – | 22 | 34 | 46 | 22 | 35 | 48 | 23 | 38 | 52 | 21 | 33 | 44 | – | – | – | – | – | – | |
| 3 | – | – | – | 25 | 39 | 53 | 25 | 40 | 55 | 26 | 43 | 59 | 24 | 38 | 51 | – | – | – | – | – | – | |
| 4 | – | – | – | 36 | 56 | 75 | 36 | 58 | 79 | 37 | 61 | 84 | 35 | 54 | 73 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | 50 | 75 | 100 | – | – | – | 50 | 78 | 105 | 50 | 80 | 110 |
| Grupo de materiales | GH1 | X700 | SP6519 | SP4019 | X500 | MP91M | SC6525 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 426 | 697 | 968 | 459 | 746 | 1033 | 426 | 656 | 886 | 459 | 795 | 1132 | 459 | 836 | 1214 |
| 2 | – | – | – | – | – | – | 377 | 615 | 853 | 394 | 648 | 902 | 377 | 582 | 787 | 394 | 697 | 1000 | 394 | 730 | 1066 | |
| 3 | – | – | – | – | – | – | 328 | 541 | 754 | 344 | 574 | 804 | 328 | 508 | 689 | 344 | 615 | 886 | 344 | 648 | 951 | |
| 4 | – | – | – | – | – | – | 246 | 410 | 574 | 262 | 443 | 623 | 246 | 385 | 525 | 262 | 467 | 672 | 262 | 476 | 689 | |
| 5 | – | – | – | 230 | 338 | 443 | 246 | 410 | 574 | 230 | 361 | 492 | 230 | 328 | 426 | – | – | – | 262 | 394 | 525 | |
| 6 | – | – | – | 164 | 272 | 377 | 230 | 344 | 459 | 164 | 295 | 426 | 164 | 262 | 361 | – | – | – | 197 | 328 | 459 | |
| M | 1 | – | – | – | 377 | 615 | 853 | 377 | 631 | 886 | 394 | 656 | 918 | 377 | 599 | 820 | – | – | – | 394 | 672 | 951 |
| 2 | – | – | – | 344 | 549 | 754 | 344 | 558 | 771 | 361 | 590 | 820 | 328 | 525 | 722 | – | – | – | 361 | 607 | 853 | |
| 3 | – | – | – | 279 | 451 | 623 | 279 | 459 | 640 | 295 | 476 | 656 | 262 | 426 | 590 | – | – | – | 295 | 492 | 689 | |
| K | 1 | 443 | 697 | 951 | – | – | – | 459 | 713 | 968 | 476 | 779 | 1082 | 394 | 656 | 918 | 476 | 836 | 1197 | 476 | 877 | 1279 |
| 2 | 394 | 599 | 804 | – | – | – | 361 | 574 | 787 | 377 | 607 | 836 | 344 | 508 | 672 | 377 | 656 | 935 | 377 | 689 | 1000 | |
| 3 | 377 | 517 | 656 | – | – | – | 328 | 525 | 722 | 344 | 558 | 771 | 312 | 435 | 558 | 344 | 599 | 853 | – | – | – | |
| N | 1–2 | 1312 | 5658 | 10004 | – | – | – | – | – | – | 1312 | 5404 | 9496 | – | – | – | – | – | – | – | – | – |
| 3 | 968 | 4485 | 8003 | – | – | – | – | – | – | 968 | 4289 | 7610 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 75 | 123 | 171 | 75 | 128 | 180 | 79 | 143 | 207 | 75 | 116 | 157 | – | – | – | – | – | – |
| 2 | – | – | – | 72 | 112 | 151 | 72 | 115 | 157 | 75 | 123 | 171 | 69 | 107 | 144 | – | – | – | – | – | – | |
| 3 | – | – | – | 82 | 128 | 174 | 82 | 131 | 180 | 85 | 139 | 194 | 79 | 123 | 167 | – | – | – | – | – | – | |
| 4 | – | – | – | 118 | 182 | 246 | 118 | 189 | 259 | 121 | 198 | 276 | 115 | 177 | 239 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | 164 | 246 | 328 | – | – | – | 164 | 254 | 344 | 164 | 262 | 361 |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia |  | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
| P3–P4 | 422-X8 | SP6519 | 432-X5 | SP6519 | 422-X4 | SP6519 |
| P5–P6 | 422-X8 | SP6519 | T-X4 | SP6519 | T-X4 | X500 |
| M1–M2 | 422-X8 | SP6519 | 432-X5 | SC6525 | 422-X4 | SP6519 |
| M3 | 422-X8 | X700 | 432-X5 | SP6519 | 422-X4 | X500 |
| K1–K2 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
| K3 | 422-X8 | SP6519 | 432-X5 | SC6525 | T-X4 | SP6519 |
| N1–N2 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
| N3 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
| S1–S2 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
| S3 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
| S4 | 422-X8 | X700 | 432-X5 | X500 | 422-X4 | X500 |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?