Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 2209971 |
| Referencia ISO | ADKT1545PDERGB |
| Referencia ANSI | ADKT2328PDER5GB |
| Calidad | KCPK30 |
| Longitud de plaquita [LI] | 15 mm |
| Longitud de plaquita [LI] | 0.5905 in |
| Grosor de plaquita [S] | 4.5 mm |
| Grosor de plaquita [S] | 0.1772 in |
| Ancho de plaquita [W] | 10 mm |
| Ancho de plaquita [W] | 0.394 in |
| Longitud de cara de esquina [BS] | 2.636 mm |
| Longitud de cara de esquina [BS] | 0.1038 in |
| Radio de esquina [Rε] | 0.8 mm |
| Radio de esquina [Rε] | 0.031 in |
| Grosor medio de las virutas [HM] | 0.064 mm |
| Grosor medio de las virutas [HM] | 0.0025 in |
| Filos de corte por plaquita | 2 |
Grades
KCPK30
Una calidad de metal duro con recubrimiento CVD de varias capas (TiN/TiCN/Al2O3) y un tratamiento avanzado posterior al recubrimiento Beyond™. El sustrato es muy resistente. KCPK30 se puede utilizar en una amplia gama de aplicaciones en el fresado general y desbaste de aceros y fundiciones. Ofrece un mejor rendimiento en seco pero también se puede utilizar en húmedo.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||
| 10% | 20 | |||||||||
| ADCT…E..LD | 0,10 | 0,20 | 0,36 | 0,05 | 0,13 | 0,23 | 0,05 | 0,13 | 0,20 | ADCT…E..LD |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||
| 10% | 20 | |||||||||
| ADCT…E..LD | .004 | .008 | .014 | .002 | .005 | .009 | .002 | .005 | .008 | ADCT…E..LD |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||
| 50 | ||||
| Todas las plaquitas | .004 | .010 | .016 | Todas las plaquitas |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Grupo de materiales | KC522M | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 10 | 250 | 230 | 150 | 135 | 120 | 260 | 230 | 210 | – | – | – | |
| 6 | 190 | 170 | 145 | 90 | 80 | – | 160 | 135 | – | – | – | – | |
| M | 1 | 225 | 200 | 175 | 170 | 150 | 135 | 205 | 185 | 155 | – | – | – |
| 2 | 205 | 175 | 160 | 155 | 140 | 130 | 185 | 160 | 140 | – | – | – | |
| 3 | 160 | 145 | 125 | 115 | 105 | – | 145 | 130 | 115 | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 35 | 30 | 25 | – | – | – | – | – | – |
| 2 | – | – | – | 30 | 30 | 25 | – | – | – | – | – | – | |
| 3 | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | |
| 4 | – | – | – | 50 | 45 | 30 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KCPM20 | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 30 | 820 | 750 | 490 | 440 | 400 | 850 | 760 | 690 | – | – | – | |
| 6 | 630 | 550 | 475 | 300 | 260 | – | 520 | 450 | – | – | – | – | |
| M | 1 | 730 | 655 | 570 | 560 | 490 | 450 | 680 | 600 | 515 | – | – | – |
| 2 | 670 | 580 | 520 | 510 | 460 | 420 | 610 | 530 | 460 | – | – | – | |
| 3 | 530 | 475 | 410 | 380 | 340 | – | 475 | 430 | 380 | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 120 | 100 | 80 | – | – | – | – | – | – |
| 2 | – | – | – | 100 | 100 | 80 | – | – | – | – | – | – | |
| 3 | – | – | – | 130 | 120 | 80 | – | – | – | – | – | – | |
| 4 | – | – | – | 170 | 150 | 100 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KC522M | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 6 | 650 | 490 | 400 | 520 | 400 | 310 | – | – | – | – | – | – | |
| M | 1 | 800 | 710 | 650 | 670 | 590 | 540 | – | – | – | – | – | – |
| 2 | 730 | 620 | 520 | 610 | 520 | 430 | – | – | – | – | – | – | |
| 3 | 550 | 480 | 370 | 460 | 400 | 310 | – | – | – | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 160 | 140 | 110 | 120 | 100 | – | – | – | – | – | – | – |
| 2 | 160 | 140 | 110 | 100 | 100 | – | – | – | – | – | – | – | |
| 3 | 200 | 160 | 110 | 130 | 130 | – | – | – | – | – | – | – | |
| 4 | 280 | 200 | 140 | 170 | 150 | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia |  | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | ADCT…E..LD | KCPM20 | ADCT…E..LD | KCPM20 | ADCT…E..LD | KCPK30 |
| M1–M2 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| M3 | ADCT…E..LD | KCPK30 | ADCT…E..LD | KCPK30 | ADCT…E..LD | KCPK30 |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| S3 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| S4 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?