Drill Fix™ DFT™ • ST Inserts
Drill Fix™ DFT™ • ST Inserts
Vlastnosti a výhody
- Břitové destičky s pájenými PCD břity pro obrábění neželezných materiálů.
- Vysoká odolnost proti otěru přináší delší životnost.
- Lepší produktivita díky vyšším hodnotám posuvů.
Filtry a sloupce
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
Workpiece Material
Workpiece Material
-
N Non-Ferrous Materials (5)
-
N1Wrought Aluminum (5)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (5)
-
N3High-Silicon Aluminum Alloys Si >12.2% (5)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100 (5)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (5)
-
N6Carbon, Graphite Composites, CFRP (5)
-
N7MMC's (5)
-
Cutting Condition
Cutting Condition
-
Interrupted (5)
-
Stable (5)
-
Unstable (5)
insertGeometry
Insert IC Size
Insert IC Size
-
8.0 mm (1)
-
10.0 mm (1)
-
12.0 mm (1)
-
15.0 mm (1)
-
17.6 mm (1)
komu
Insert IC Size
Insert IC Size
-
0.315 in (1)
-
0.394 in (1)
-
0.473 in (1)
-
0.591 in (1)
-
0.694 in (1)
komu
Cutting Edge Length
Cutting Edge Length
-
5.2 mm (1)
-
6.525 mm (1)
-
7.851 mm (1)
-
9.826 mm (1)
-
11.525 mm (1)
komu
Cutting Edge Length
Cutting Edge Length
-
0.206 in (1)
-
0.257 in (1)
-
0.309 in (1)
-
0.387 in (1)
-
0.454 in (1)
komu
No filters matching ""
Změňte viditelné sloupce pomocí některého z parametrů uvedených níže. Lze zobrazit maximálně 7 sloupců.
Zobrazování
1-
5
z
5 výsledky
Metrické
Palcové
Zobrazit
Metrické
Palcové
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [Rε] Corner Radius | [Rε] Corner Radius | [D1] Insert Hole Size | [D1] Insert Hole Size | [S] Insert Thickness | [S] Insert Thickness | [L10] Insert Cutting Edge Length | [L10] Insert Cutting Edge Length | [D] Insert IC Size | [D] Insert IC Size | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4115433 | DFT05T308ST | DFT05T308ST | KD1425 | 0.8 | .0312 | 3.4 | .134 | 3.75 | .148 | 5.19 | .205 | 8 | .315 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ceníková cena:
$295.04
/každý
Vaše cena::
Počet
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4115434 | DFT06T308ST | DFT06T308ST | KD1425 | 0.8 | .0312 | 4.4 | .173 | 3.75 | .148 | 6.52 | .257 | 10 | .394 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ceníková cena:
$311.79
/každý
Vaše cena::
Počet
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4115435 | DFT070408ST | DFT070408ST | KD1425 | 0.8 | .0312 | 4.4 | .173 | 4.75 | .187 | 7.84 | .309 | 12 | .472 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ceníková cena:
$328.51
/každý
Vaše cena::
Počet
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4115436 | DFT090508ST | DFT090508ST | KD1425 | 0.8 | .0312 | 5.5 | .217 | 5.19 | .204 | 9.83 | .387 | 15 | .591 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ceníková cena:
$348.29
/každý
Vaše cena::
Počet
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4115437 | DFT110508ST | DFT110508ST | KD1425 | 0.8 | .0312 | 5.85 | .23 | 4.81 | .189 | 11.53 | .454 | 17.6 | .6929 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ceníková cena:
$366.51
/každý
Vaše cena::
Počet
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ceníková cena:
Sleva: %
Výměna
Tato položka není k dispozici
Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
Počet
Prodáváno v baleních z
UPOZORNĚNÍ • Drill Fix DFR
| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
| D | LS | CS |
| 32 | 58 | R 1/4 BSP |
| 40 | 68 | R 1/4 BSP |
| 50 | 68 | R 1/4 BSP |
DFT™ • PCD • Metrické
| Metric | |||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Cutting Speed
|
Recommended Feed Rate (f) by Diameter | |||||||||
| Range
|
|||||||||||||||
| Min | Starting Value | Max | Ø | DFT03 16
|
DFT05 25
|
DFT06 33
|
DFT07 41
|
DFT09 49
|
DFT11 69
|
||||||
| N | 1 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
| I | ST/C | KD1425 | |||||||||||||
| 2 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| 3 | S | O | ST/C | KD1425 | 413 | 619 | 743 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| 4 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| 5 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| Inch | |||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Cutting Speed
|
Recommended Feed Rate (f) by Diameter | |||||||||
| Range
|
|||||||||||||||
| Min | Starting Value | Max | Ø | DFT03 .625–.969" | DFT05 .984–1.250" | DFT06 1.313–1.563" | DFT07 1.625–1.875" | DFT09 1.938–2.125" | DFT11 2.750–3.250" | ||||||
| N | 1 | S | O | ST/C | KD1425 | 1575 | 2362 | 2834 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
| I | ST/C | KD1425 | |||||||||||||
| 2 | S | O | ST/C | KD1425 | 1465 | 2197 | 2636 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| 3 | S | O | ST/C | KD1425 | 1355 | 2032 | 2438 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| 4 | S | O | ST/C | KD1425 | 1465 | 2197 | 2636 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| 5 | S | O | ST/C | KD1425 | 1575 | 2362 | 2834 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed
|
|||||||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03 16
|
DFT05 25
|
DFT06 33
|
DFT07 41
|
DFT09 49
|
DFT11 69
|
|
| N | 1 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
| 1 | S | I | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | S | I | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | S | O | ST/C | KD1425 | 413 | 619 | 743 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | S | I | ST/C | KD1425 | 413 | 619 | 743 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | S | I | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | S | I | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |